Three-feature model to reproduce the topology of citation networks and the effects from authors' visibility on their h-index

Various factors are believed to govern the selection of references in citation networks, but a precise, quantitative determination of their importance has remained elusive. In this paper, we show that three factors can account for the referencing pattern of citation networks for two topics, namely "graphenes" and "complex networks", thus allowing one to reproduce the topological features of the networks built with papers being the nodes and the edges established by citations. The most relevant factor was content similarity, while the other two - in-degree (i.e. citation counts) and age of publication - had varying importance depending on the topic studied. This dependence indicates that additional factors could play a role. Indeed, by intuition one should expect the reputation (or visibility) of authors and/or institutions to affect the referencing pattern, and this is only indirectly considered via the in-degree that should correlate with such reputation. Because information on reputation is not readily available, we simulated its effect on artificial citation networks considering two communities with distinct fitness (visibility) parameters. One community was assumed to have twice the fitness value of the other, which amounts to a double probability for a paper being cited. While the h-index for authors in the community with larger fitness evolved with time with slightly higher values than for the control network (no fitness considered), a drastic effect was noted for the community with smaller fitness. (C) 2012 Elsevier Ltd. All rights reserved.

New Isomers in the Full Seniority Scheme of Neutron-Rich Lead Isotopes: The Role of Effective Three-Body Forces

The neutron-rich lead isotopes, up to Pb-216, have been studied for the first time, exploiting the fragmentation of a primary uranium beam at the FRS-RISING setup at GSI. The observed isomeric states exhibit electromagnetic transition strengths which deviate from state-of-the-art shell-model calculations. It is shown that their complete description demands the introduction of effective three-body interactions and two-body transition operators in the conventional neutron valence space beyond Pb-208.

Representation of the Weddell Sea deep water masses in the ocean component of the NCAR-CCSM model

We examine Weddell Sea deep water mass distributions with respect to the results from three different model runs using the oceanic component of the National Center for Atmospheric Research Community Climate System Model (NCAR-CCSM). One run is inter-annually forced by corrected NCAR/NCEP fluxes, while the other two are forced with the annual cycle obtained from the same climatology. One of the latter runs includes an interactive sea-ice model. Optimum Multiparameter analysis is applied to separate the deep water masses in the Greenwich Meridian section (into the Weddell Sea only) to measure the degree of realism obtained in the simulations. First, we describe the distribution of the simulated deep water masses using observed water type indices. Since the observed indices do not provide an acceptable representation of the Weddell Sea deep water masses as expected, they are specifically adjusted for each simulation. Differences among the water masses` representations in the three simulations are quantified through their root-mean-square differences. Results point out the need for better representation (and inclusion) of ice-related processes in order to improve the oceanic characteristics and variability of dense Southern Ocean water masses in the outputs of the NCAR-CCSM model, and probably in other ocean and climate models.

An in vitro study showing the three-dimensional microenvironment influence over the behavior of head and neck squamous cell carcinoma

Objectives: The Head and Neck Squamous Cell Carcinoma (HNSCC) ranks sixth worldwide. The mechanisms of growth, invasion and metastasis of this pathology are extensively studied and generally related to specific variations in signaling pathways like the PI3K-Akt; however most of these competent studies have been performed bidimensionally, which may hide important questions. This study sought to analyze the influence of the microenvironment upon the behavior of HNSCC. Study Design: The status of pAkt, NF-kappa B and Cyclin D1 proteins was accessed through immunofluorescence and western blot methods in HNSCC cell lines originating from tongue, pharynx and metastatic lymph node when submitted to a three-dimensional culture model utilizing a matrix system. A bidimensional culture model (monolayer) was used as control. Results: The HNSCC cell lines cultured three-dimensionally exhibited a growth pattern characterized by small isolated islands, different from the control group. When the three-dimensional model was applied, two of the studied cell lines showed the same expression pattern as the bidimensional model regarding nuclear or cytoplasmatic localization, as well as reduction of all protein levels; however, the cell line originated from tongue, which specially has the epidermal growth factor receptor constitutively activated, demonstrated nuclear translocation of pAkt and also an increase in the levels of Cyclin D1. Conclusions: The results suggest the influence of the microenvironment upon the behavior of HNSCC cells due to the changed expression of proteins related to tumor growth and cellular invasion. Furthermore, intrinsically genetic conditions also played important roles over the cells, despite the culture model employed.

On the stability of the extracellular hemoglobin of Glossoscolex paulistus, in two iron oxidation states, in the presence of urea

The stability of the Glossoscolex paulistus hemoglobin (HbGp), in two iron oxidation states (and three forms), as monitored by optical absorption, fluorescence emission and circular dichroism (CD) spectroscopies, in the presence of the chaotropic agent urea, is studied. HbGp oligomeric dissociation, denaturation and iron oxidation are observed. CD data show that the cyanomet-HbGp is more stable than the oxy-form. Oxy- and cyanomet-HbGp show good fits on the basis of a two state model with critical urea concentrations at 220-222 nm of 5.1 +/- 0.2 and 6.1 +/- 0.1 mol/L, respectively. The three-state model was able to reveal a subtle second transition at lower urea concentration (1.0-2.0 mol/L) associated to partial oligomeric dissociation. The intermediate state for oxy- and cyanomet-HbGp is very similar to the native state. For met-HbGp, a different equilibrium, in the presence of urea, is observed. A sharp transition at 1.95 +/- 0.05 mol/L of denaturant is observed, associated to oligomeric dissociation and hemichrome formation. In this case, analysis by a three-state model reveals the great similarity between the intermediate and the unfolded states. Analysis of spectroscopic data, by two-state and three-state models, reveals consistency of obtained thermodynamic parameters for HbGp urea denaturation. (C) 2012 Elsevier Inc. All rights reserved.

Shape isomerism and shape coexistence effects on the Coulomb energy differences in the N = Z nucleus As-66 and neighboring T=1 multiplets

Excited states of the N = Z = 33 nucleus As-66 have been populated in a fusion-evaporation reaction and studied using gamma-ray spectroscopic techniques. Special emphasis was put into the search for candidates for the T = 1 states. A new 3(+) isomer has been observed with a lifetime of 1.1(3) ns. This is believed to be the predicted oblate shape isomer. The excited levels are discussed in terms of the shell model and of the complex excited Vampir approaches. Coulomb energy differences are determined from the comparison of the T = 1 states with their analog partners. The unusual behavior of the Coulomb energy differences in the A = 70 mass region is explained through different shape components (oblate and prolate) within the members of the same isospin multiplets. This breaking of the isospin symmetry is attributed to the correlations induced by the Coulomb interaction.

DNA - novel nanomaterial for applications in photonics and in electronics

Functionalization with surfactants and with active molecules of deoxyribonucleic acid (DNA), thin film processing as well as their nonlinear optical and electrical properties are reviewed and discussed. On the basis of a quantum three level model, we show that the anomalous concentration variation of cubic susceptibility chi((3))(-3 omega; omega, omega, omega) in thin films of DNA-CTMA complexes doped with Disperse Red 1 chromophore can be explained by the concentration variation of two-photon resonance contribution. We show also that the DNA complexes, plasticized with glycerol and adequately doped can be processed into self standing conducting membranes with a high electrical conductivity. The measured ionic conductivity at room temperature, depending on dopant used and its concentration, is in the range of 3.5 x 10(-4)-10(-5) S/cm and increases linearly as a function of temperature, reaching 10(-3) S/cm at 358 K for the most conducting sample, obeying predominantly the Arrhenius law. Practical applications of DNA complexes are also described and discussed. (C) 2012 Academie des sciences. Published by Elsevier Masson SAS. All rights reserved.

Structure of the N=50 As, Ge, Ga nuclei

The level structures of the N = 50 As-83, Ge-82, and Ga-81 isotones have been investigated by means of multi-nucleon transfer reactions. A first experiment was performed with the CLARA PRISMA setup to identify these nuclei. A second experiment was carried out with the GASP array in order to deduce the gamma-ray coincidence information. The results obtained on the high-spin states of such nuclei are used to test the stability of the N = 50 shell closure in the region of Ni-78 (Z = 28). The comparison of the experimental level schemes with the shell-model calculations yields an N = 50 energy gap value of 4.7(3) MeV at Z = 28. This value, in a good agreement with the prediction of the finite-range liquid-drop model as well as with the recent large-scale shell model calculations, does not support a weakening of the N = 50 shell gap down to Z = 28. (c) 2012 Elsevier B.V. All rights reserved.

A comparative study of the purification of betanin

Betanin is a natural pigment with antioxidant properties used as a food colourant. This work describes the spectrophotometric and chromatographic quantification of betanin (2S/15S) and its epimer isobetanin (2S/15R) in fresh beetroot juice, food-grade beetroot powder and betanin standard diluted in dextrin. Absorption spectra of all three samples were deconvoluted using a mixed three-function model. Food-grade beetroot powder has the largest amount of violet-red impurities, probably formed during processing. The purification of betanin from these complex matrices was carried out by seven different methods. Ion exchange chromatography was the most efficient method for the purification of betanin from all samples; however, fractions contain high amounts of salt. Reversed-phase HPLC as well as reversed-phase column chromatography also produced good results at a much faster rate. The longer retention time of isobetanin when compared to betanin in reversed-phase conditions has been investigated by means of quantum-mechanical methods. (C) 2011 Elsevier Ltd. All rights reserved.

O modelo tridimensional físico e seu papel na educação patrimonial

Este artigo versa sobre uma pesquisa integrante do Núcleo de Apoio à Pesquisa em Estudos de Linguagem em Arquitetura e Cidade (N.ELAC), que desenvolve pesquisas em Linguagem e Representação. Entre as diversas formas de representação em arquitetura, a presente pesquisa traz o modelo tridimensional físico como ferramenta que proporciona maior facilidade de leitura do projeto, sendo mais concreta que os desenhos técnicos. Objetiva-se, assim, destacar a importância do modelo físico como meio de aproximação da população ao patrimônio arquitetônico. Como estudo de caso, foi escolhido o Edifício E1, obra de Ernest Mange e Hélio Duarte. Localizado no campus da USP em São Carlos, é considerado patrimônio da cidade, entretanto, encontra-se praticamente enclausurado no interior do campus, dificultando maior contato da comunidade com o edifício. O projeto do edifício utilizou apenas o desenho como representação, não incluindo nenhum tipo de modelo tridimensional (físico ou digital). A partir de um levantamento das representações gráficas utilizadas pelos projetistas, foi possível fazer uma comparação entre o nível de compreensão do projeto apenas com as peças gráficas dos arquitetos e a partir do modelo físico, produzido pela pesquisadora. Foi realizado um pré-teste em escola pública municipal, despertando o interesse desses alunos pelo edifício em questão.

O uso da maquete física como ferramenta de leitura do patrimônio cultural

O presente artigo vincula-se às pesquisas do Núcleo de Apoio à Pesquisa em Estudos de Linguagem em Arquitetura e Cidade (N.ELAC), que atua na área de Linguagem e Representação. Diante das diversas formas de representação em arquitetura (desenho, maquete, modelos digitais), nesta pesquisa o modelo tridimensional físico é trazido como ferramenta que proporciona maior facilidade de leitura do projeto e tratado como meio de aproximação da comunidade ao patrimônio arquitetônico, envolvendo, sobretudo, a arquitetura moderna paulista. Como estudo de caso, escolheu-se o Edifício E1, obra de Ernest Mange e Hélio Duarte. Localizado no campus da USP em São Carlos, é considerado patrimônio da cidade, entretanto, encontra-se praticamente enclausurado no interior do campus, dificultando maior contato da comunidade com o edifício. Durante sua execução, foi utilizado apenas o desenho como ferramenta de representação de projeto, não incluindo nenhum tipo de modelo tridimensional (físico ou digital). A partir do levantamento das representações gráficas utilizadas, foi possível fazer uma comparação entre o nível de compreensão do projeto apenas com as peças gráficas dos arquitetos e a partir do modelo físico, produzido pela pesquisadora. Realizou-se um pré-teste em escola pública municipal, que indicou um aumento no interesse desses alunos pelo edifício em questão.

O uso de modelos nos processos projetuais contemporâneos

Durante o processo de projeto, o arquiteto transpõe suas ideias para o campo real, do concreto. Os diversos modos de expressão e representação têm como função mediar essa interação, diminuindo a distância entre esses dois campos. Vive-se hoje, um momento de intensa transformação das estratégias projetuais, propiciada pelos novos meios digitais. Assim, esta pesquisa, centra-se na comparação entre diversos momentos do uso de modelos nos processos projetivos contemporâneos, através de uma investigação em escritórios de arquitetura paulistanos que utilizam o modelo físico como parte de seus processos de projeto. Busca-se entender qual o papel dessa ferramenta de representação e suas potencialidades nos dias atuais. Como estudo de caso, faz-se uma análise comparativa entre o uso das maquetes digital e física, destacando dois estudos: a maquete do Conjunto Ponte dos Remédios, do arquiteto Marcos Acayaba e as maquetes de estudos elaboradas pelo escritório Andrade Morettin Arquitetos, para o concurso para o Instituto Moreira Salles/SP. Entre os objetivos desse trabalho também se encontra uma análise da contribuição dos modelos físicos no Ensino de Arquitetura.

O uso do modelo físico e digital nos processos de projeto da arquitetura contemporânea

Durante o processo de projeto, o arquiteto transpõe suas ideias para o campo real, do concreto. Os diversos modos de expressão e representação têm como função mediar essa interação, diminuindo a distância entre esses dois campos. Vive-se hoje, um momento de intensa transformação das estratégias projetuais, propiciadas pelos novos meios digitais. Esta pesquisa tem como objetivo o estudo do uso das representações tridimensionais, especificamente dos modelos físicos e digitais. Pretende-se flagrar os momentos contributivos dos modelos no processo projetivo e as características intrínsecas a eles. A discussão busca não apenas destacar a importância dessa ferramenta, como também, traçar uma breve comparação entre a tecnologia digital e a feitura manual. Para este trabalho foram selecionados alguns arquitetos significativos do cenário da arquitetura paulista em cujos projetos comparecem o uso de modelos. Como estudos de caso tem-se a Residência do arquiteto Marcos Acayaba e o projeto vencedor do Concurso para o Instituto Moreira Salles/ SP, do escritório Andrade Morettin Arquitetos. Soma-se a estes objetivos, a apresentação do uso de modelos físicos e digitais em uma experiência didática projetiva.

A palaeobiogeographic model for biotic diversification within Amazonia over the past three million years

Many hypotheses have been proposed to explain high species diversity in Amazonia, but few generalizations have emerged. In part, this has arisen from the scarcity of rigorous tests for mechanisms promoting speciation, and from major uncertainties about palaeogeographic events and their spatial and temporal associations with diversification. Here, we investigate the environmental history of Amazonia using a phylogenetic and biogeographic analysis of trumpeters (Aves: Psophia), which are represented by species in each of the vertebrate areas of endemism. Their relationships reveal an unforeseen 'complete' time-slice of Amazonian diversification over the past 3.0 Myr. We employ this temporally calibrated phylogeny to test competing palaeogeographic hypotheses. Our results are consistent with the establishment of the current Amazonian drainage system at approximately 3.0-2.0 Ma and predict the temporal pattern of major river formation over Plio-Pleistocene times. We propose a palaeobiogeographic model for the last 3.0 Myr of Amazonian history that has implications for understanding patterns of endemism, the temporal history of Amazonian diversification and mechanisms promoting speciation. The history of Psophia, in combination with new geological evidence, provides the strongest direct evidence supporting a role for river dynamics in Amazonian diversification, and the absence of such a role for glacial climate cycles and refugia.

Design of laminated piezocomposite shell transducers with arbitrary fiber orientation using topology optimization approach

Sensor and actuator based on laminated piezocomposite shells have shown increasing demand in the field of smart structures. The distribution of piezoelectric material within material layers affects the performance of these structures; therefore, its amount, shape, size, placement, and polarization should be simultaneously considered in an optimization problem. In addition, previous works suggest the concept of laminated piezocomposite structure that includes fiber-reinforced composite layer can increase the performance of these piezoelectric transducers; however, the design optimization of these devices has not been fully explored yet. Thus, this work aims the development of a methodology using topology optimization techniques for static design of laminated piezocomposite shell structures by considering the optimization of piezoelectric material and polarization distributions together with the optimization of the fiber angle of the composite orthotropic layers, which is free to assume different values along the same composite layer. The finite element model is based on the laminated piezoelectric shell theory, using the degenerate three-dimensional solid approach and first-order shell theory kinematics that accounts for the transverse shear deformation and rotary inertia effects. The topology optimization formulation is implemented by combining the piezoelectric material with penalization and polarization model and the discrete material optimization, where the design variables describe the amount of piezoelectric material and polarization sign at each finite element, with the fiber angles, respectively. Three different objective functions are formulated for the design of actuators, sensors, and energy harvesters. Results of laminated piezocomposite shell transducers are presented to illustrate the method. Copyright (C) 2012 John Wiley & Sons, Ltd.