13 resultados para germplasm collection
em Biblioteca Digital da Produção Intelectual da Universidade de São Paulo
Resumo:
The Musa germplasm collection at Embrapa Cassava and Fruits detains accessions from different sections of the Musa genus. The objective of the present study was to identify and morphologically characterize banana accessions from the banana germplasm with ornamental potential, as well as to quantify their genetic variability; and identify possible progenitors to be used in breeding aiming to achieve ornamental crossbreeds. The accessions were evaluated with the use of 32 morphological descriptors. Then, they were the following grouped into categories: landscape plants, cut flower, potted plants, and male inflorescence minifruits. The pre-selected accessions presented great genetic variability and ornamental potential for different uses. The accessions of the Rhodochlamys and Callimusa sections were selected to be used as landscape plants, cut flowers, potted plants, male inflorescence and minifruits. Most of the diploids from the Eumusa section evaluated in this study are indicated for the production of ornamental minifruits, except for 'Lidi' and Cici, which can also be indicated as landscape plants. The BB diploids have great potential for the use of the male inflorescence in floral arrangements, and did not offer any other indication.
Resumo:
A catalogue of the type-specimens of Bombyliidae and Mydidae (Diptera) held in the collection of the Museu de Zoologia da Universidade de Sao Paulo (MZUSP) is provided, with information on 109 type specimens of 34 Neotropical (mostly Brazilian) species of the families Bombyliidae and Mydidae.
Resumo:
The University of So Paulo Gracilariaceae Germplasm Bank has 50 strains collected mostly in Brazil, but also elsewhere in the world. This bank has been used as a source of material for research developed locally and abroad. With over 200 species, some of which have high economic value, the family Gracilariaceae has been extensively studied. Nonetheless, taxonomic problems still persist by the existence of cryptic species, phenotypic plasticity, and broad geographic distribution. In the case of algae kept in culture for long periods of time, the identification is even more problematic as a consequence of considerable morphological modification. Thus, the use of molecular markers has been shown to be an efficient tool to elucidate taxonomic issues in the group. In this work, we sequenced the 5'-end of the cox1 gene for 41 strains and the universal plastid amplicon (UPA) plastid region for 45 strains, covering all 50 strains in the bank. In addition, the rbcL for representatives of the cox1/UPA clusters was sequenced for 14 strains. The original species identification based on morphology was compared with the molecular data obtained in this work, resulting in the identification of 13 different species. Our analyses indicate that cox1 and UPA are suitable markers for the delineation of species of Gracilariales in the germplasm bank. The addition of DNA barcode tags to the samples in the Gracilariaceae germplasm bank and the molecular identification of the species will make this bank even more useful for future research as the species can be easily traced and confirmed.
Resumo:
Bone marrow is a source of stem cells for greater and easier access, which is widely studied as a provider of hematopoietic and mesenchymal cells for various purposes, mainly therapeutic by the advances in research involving cell therapy. The swine is an animal species commonly used in the pursuit of development of experimental models. Thus, this study aimed to standardize protocol for collection and separation of bone marrow in swines, since this species is widely used as experimental models for various diseases. Twelve animals were used, which underwent bone marrow puncture with access from the iliac crest and cell separation by density gradient followed by a viability test with an average of 98% of viable cells. Given our results, we can ensure the swine as an excellent model for obtaining and isolation of mononuclear cells from bone marrow, stimulating several studies addressing the field of cell therapy. Microsc. Res. Tech., 2012. (C) 2012 Wiley Periodicals, Inc.
Resumo:
Lia Goncalves, Claudia Ines da Silva, and Maria Luisa Tunes Buschini (2012) Collection of pollen grains by Centris (Hemisiella) tarsata Smith (Apidae: Centridini): Is C. tarsata an oligolectic or polylectic species? Zoological Studies 51(2): 195-203. Among pollinator species, bees play a prominent role in maintaining biodiversity because they are responsible, on average, for 80% of angiosperm pollination in tropical regions. The species richness of the bee genus Centris is high in South America. In Brazil, these bees occur in many types of ecosystems. Centris tarsata is an endemic species occurring only in Brazil. No previous studies considered interactions between plants and this bee species in southern Brazil, where it is the most abundant trap-nesting bee. Accordingly, the goals of this study were to investigate plants used by this species for its larval food supply and determine if this bee is polylectic or oligolectic in this region. This work was conducted in the Parque Municipal das Araucarias, Guarapuava (PR), southern Brazil, from Mar. 2002 to Dec. 2003. Samples of pollen were collected from nests of these bees and from flowering plants in grassland and swamp areas where the nests were built. All of the samples were treated with acetolysis to obtain permanent slides. The family Solanaceae was visited most often (71%). Solanum americanum Mill. (28.6%) and Sol. variabile Mart. (42.4%) were the primary pollen sources for C. tarsata in the study area. We found that although C. tarsata visited 20 species of plants, it preferred Solanum species with poricidal anthers and pollen grains with high protein levels. This selective behavior by females of C. tarsata indicates that these bees are oligolectic in their larval provisioning in this region of southern Brazil. http://zoolstud.sinica.edu.tw/Journals/51.2/195.pdf
Resumo:
Low temperatures at the initial stages of rice development prevent fast germination and seedling establishment and may cause significant productivity losses. In order to develop rice cultivars exhibiting cold tolerance, it is necessary to investigate genetic resources, providing basic knowledge to allow the introduction of genes involved in low temperature germination ability from accessions into elite cultivars. Japanese rice accessions were evaluated at the germination under two conditions: 13 degrees C for 28 days (cold stress) and 28 degrees C for seven days (optimal temperature). The traits studied were coleoptile and radicle length under optimal temperature, coleoptile and radicle length under cold and percentage of the reduction in coleptile and radicle length due to low temperature. Among the accessions studied, genetic variation for traits related to germination under low temperatures was observed and accessions exhibiting adequate performance for all investigated traits were identified. The use of multivariate analysis allowed the identification of the genotypes displaying cold tolerance by smaller reductions in coleoptile and radicle lenght in the presence of cold and high vigour, by higher coleoptile and radicle growth under cold.
Resumo:
The objective of this study was to evaluate the genetic differences among three matrix groups of Cedrela fissilis based on quantitative juvenile variables on a progeny test to define seed collecting zones and use of seeds of this species in the study region as well as to evaluate genetic variability of the sampled material. A progeny test was established in a nursery with seeds from 48 seed trees collected in the municipalities of Rio Negrinho, Mafra and Sao Bento do Sul, state of Santa Catarina, and in the municipalities of Lapa, Rio Negro, Campo do Tenente and Antonio Olinto, state of Parana. Of the collected seed trees, 33 sampled trees were distributed in three sites and 15 trees were dispersed in the studied region. It was used a complete random block design, with 8 replicates and 20 plants per plot. Evaluated data included: emergency rate; seedling base diameter and height (61, 102 and 145 days after the seeds were sowed); seedling survival; number of leaves per seedling; aerial section dry mass and root dry mass; and the foliar area of the third fully expanded leaf measured from the apical meristem. The Maximum Restricted Likelihood Method (REML) was used, using the software SELEGEN for analysis. It was found that the juvenile characters are strongly genetically controlled and they can be used to estimate genetic variability of population samples of Cedrela fissilis. The three groups of trees spatially limited did not significantly differ among each other, allowing to conclude that the three areas are part of the same tree seed transfer zone.
Resumo:
The Diptera collection of the Natural History Museum Berlin holds one of the most important collections of Neriidae. In this paper, the type specimens (holotypes, lectotypes, paratypes, paralectotypes, syntypes) of this historical collection are listed. 28 species-group taxa are dealt with. A lectotype designation is made for the species Brachantichir purpusianus Enderlein, 1922 in order to fix the identity of the name. Holotypes are recognized by monotypy of the species Chaetomeristes bullatus Enderlein, 1922; Chaetomeristes peruanus Enderlein, 1922; Derocephalus angusticollis Enderlein, 1922; Glyphidops limbatus Enderlein, 1922; Longina abdominalis Wiedemann, 1830; Loxozus clavicornis Enderlein, 1922; Oncopsia mexicana Enderlein, 1922; Paranerius fibulatus Enderlein, 1922; Telostylinus dahli Enderlein, 1922; Telostylus latibrachium Enderlein, 1922; and Telostylinus luridus Enderlein, 1922. Syntypes are labelled and listed for Brachantichir robusta Enderlein, 1922; Nerius terebratus Enderlein, 1922; Odontoloxozus punctulatus Enderlein, 1922; Telostylinus apicalis Enderlein, 1922; Telostylinus obscuratus Enderlein, 1922; and Telostylinus ornatipennis Enderlein, 1922. The account concludes with geographic and taxonomic summaries; an appendix listing the abbreviations, localities, and collectors cited in the text; and a bibliography. ((c) 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)
Resumo:
The ornamental market is dynamic and demands constant novelties. The use of fruit crops as ornamental plants can be an interesting alternative with very differentiated and original products. The banana germplasm bank at Embrapa Cassava and Fruits has been primarily used in the breeding program for generating new cultivars as food. To diversify and expand the use of this collection, accessions with ornamental potential have been selected to obtain new hybrids. This work was aimed at characterizing the progeny of ornamental Musa L. spp. by grouping the hybrids according to the following uses: landscape plants, potted plants, cut flower, or minifruits. Forty-two hybrids were evaluated with 14 quantitative and 12 qualitative descriptors in three production cycles. In addition, assays for resistance to black and yellow Sigatoka and to Fusarium wilt were performed. Variability was observed for all the characteristics evaluated within progenies, especially with regard to leaf color, fruit, peduncle, rachis, and heart. All evaluated hybrids were resistant to yellow Sigatoka and to Fusarium wilt and were resistant or showed reduced symptoms of susceptibility to black Sigatoka. Most hybrids (82%) presented reduced plant height. After clustering by use category, the hybrids RM 09, RM 38, RM 37, and RM 33 were selected and recommended to be used as cut flowers, minifruits, or landscaping plants.
Resumo:
Background: The CUPID (Cultural and Psychosocial Influences on Disability) study was established to explore the hypothesis that common musculoskeletal disorders (MSDs) and associated disability are importantly influenced by culturally determined health beliefs and expectations. This paper describes the methods of data collection and various characteristics of the study sample. Methods/Principal Findings: A standardised questionnaire covering musculoskeletal symptoms, disability and potential risk factors, was used to collect information from 47 samples of nurses, office workers, and other (mostly manual) workers in 18 countries from six continents. In addition, local investigators provided data on economic aspects of employment for each occupational group. Participation exceeded 80% in 33 of the 47 occupational groups, and after pre-specified exclusions, analysis was based on 12,426 subjects (92 to 1018 per occupational group). As expected, there was high usage of computer keyboards by office workers, while nurses had the highest prevalence of heavy manual lifting in all but one country. There was substantial heterogeneity between occupational groups in economic and psychosocial aspects of work; three-to fivefold variation in awareness of someone outside work with musculoskeletal pain; and more than ten-fold variation in the prevalence of adverse health beliefs about back and arm pain, and in awareness of terms such as "repetitive strain injury" (RSI). Conclusions/Significance: The large differences in psychosocial risk factors (including knowledge and beliefs about MSDs) between occupational groups should allow the study hypothesis to be addressed effectively.
Resumo:
An annotated list is provided of the type specimens of seven species of Bolitophilidae Winnertz, 1863 and Ditomyiidae Keilin, 1919 (Diptera, Bibionomorpha) the Museum national d' Histoire naturelle (Paris).
Resumo:
Models of the filtration phenomenon describe the mass balance in bed filtration in terms of particle removal mechanisms, and allow for the determination of global particle removal efficiencies. These models are defined in terms of the geometry and characteristic elements of granule collectors, particles and fluid, and also the composition of the balance of forces that act in the particle collector system. This work analyzes particles collection efficiency comparing downflow and upflow direct filtration, taking into account the contribution of the gravitational factor of the settling removal efficiency in future proposal of initial collection efficiency models for upflow filtration. A qualitative analysis is also made of the proposal for the collection efficiency models for particle removal in direct downflow and upflow filtration using a Computational Fluid Dynamics (CFD) tool. This analysis showed a strong influence of gravitational factor in initial collection efficiency (t = 0) of particles, as well as the reasons of their values to be smaller for upflow filtration in comparison with the downflow filtration.