Perinatal and early adulthood factors associated with adiposity

We used body mass index (BMI) and waist circumference (WC) as fat indicators to assess whether perinatal and early adulthood factors are associated with adiposity in early adulthood. We hypothesized that risk factors differ between men and women and are also different when WC is used for measuring adiposity as opposed to BMI. We conducted a longitudinal study based on a sample of 2,063 adults from the 1978/1979 Ribeirao Preto birth cohort. Adjustment was performed using four sequential multiple linear regression models stratified by sex. Both perinatal and early adulthood variables influenced adulthood BMI and WC. The associations differed between men and women and depending on the measure of abdominal adiposity (BMI or WC). Living with a partner, for both men and women, and high fat and alcohol intake in men were factors that were consistently associated with higher adulthood BMI and WC levels. The differences observed between sexes may point to different lifestyles of men and women, suggesting that prevention policies should consider gender specific strategies.

Prevalence of overweight and obesity in elderly people from Vitoria-ES, Brazil

The scope of this study was to estimate the prevalence of overweight and obesity and its association with socio-economic status in a sample of non-institutionalized elderly people from Vitoria-ES, Brazil. This was a cross-sectional survey with a sample of 882 elderly people aged 60 and over. Obesity and overweight were assessed using the body mass index (BMI) and waist circumference (WC). All subjects answered a personal and socio-demographic questionnaire in relation to age, gender, marital status, physical activity, number of children, chronic diseases and smoking. Associations between categorical variables were tested using chi-square analysis with a 5% significance level. The prevalence of overweight and obesity was high (41.8% and 23.4%, respectively) and 50.7% of the elderly had a substantially increased waist circumference. About 4.3% of the individuals had diabetes, 50.4% had hypertension and 14.9% were found to have both diseases. It was observed that both the BMI and WC were significant associated (p<0.05) with sex, marital status, the presence of diseases and with cigarette smoking.

Deformation of Implant Abutments After Framework Connection Using Strain Gauges

When a cylinder is connected to an abutment it is expected that abutment and cylinder will be subjected to compression forces throughout their periphery because of the clamping force exerted by the screw. The deformation resultant of this compression should be measurable and uniform along the periphery of the abutment. Considering that multiple retainers connected to each other can affect the fit of a framework, as well as the use of different alloys, it is expected that the abutments will present different levels of deformation as a result of framework connection. The aim of this study was to evaluate the deformation of implant abutments after frameworks, cast either in cobalt-chromium (CoCr) or silver-palladium (AgPd) alloys, were connected. Samples (n = 5) simulating a typical mandibular cantilevered implant-supported prosthesis framework were fabricated in cobalt-chromium and silver-palladium alloys and screwed onto standard abutments positioned on a master-cast containing 5 implant replicas. Two linear strain gauges were fixed on the mesial and distal aspects of each abutment to capture deformation as the retention screws were tightened. A combination of compressive and tensile forces was observed on the abutments for both CoCr and AgPd frameworks. There was no evidence of significant differences in median abutment deformation levels for 9 of the 10 abutment aspects. Visually well-fit frameworks do not necessarily transmit load uniformly to abutments. The use of CoCr alloy for implant-supported prostheses frameworks may be as clinically acceptable as AgPd alloy.

Waist circumference and waist circumference to height ratios of Kaingang indigenous adolescents from the State of Rio Grande do Sul, Brazil

The aim of this study was to describe the distribution of waist circumference (WC) and WC to height (WCTH) values among Kaingang indigenous adolescents in order to estimate the prevalence of high WCTH values and evaluate the correlation between WC and WCTH and body mass index (BMI)-for-age. A total of 1,803 indigenous adolescents were evaluated using a school-based cross-sectional study. WCTH values > 0.5 were considered high. Higher mean WC and WCTH values were observed for girls in all age categories. WCTH values > 0.5 were observed in 25.68% of the overall sample of adolescents. Mean WC and WCTH values were significantly higher for adolescents with BMI/age z-scores > 2 than for those with normal z-scores. The correlation coefficients of WC and WCTH for BMI/age were r = 0.68 and 0.76, respectively, for boys, and r = 0.79 and 0.80, respectively, for girls. This study highlights elevated mean WC and WCTH values and high prevalence of abdominal obesity among Kaingang indigenous adolescents.

The use of body circumferences for the prediction of intra-abdominal fat in obese women with polycystic ovary syndrome

Introduction: Computerizd tomography (CT) is the gold standard for the evaluation of intra- (IAF) and total (TAF) abdominal fat; however, the high cost of the procedure and exposure to radiation limit its routine use. Objective: To develop equations that utilize anthropometric measures for the estimate of IAF and TAF in obese women with polycystic ovary syndrome (PCOS). Methods: The weight, height, BMI, and abdominal (AC), waist (WC), chest (CC), and neck (NC) circumferences of thirty obese women with PCOS were measured, and their IAF and TAF were analyzed by CT. Results: The anthropometric variables AC, CC, and NC were chosen for the TAF linear regression model because they were better correlated with the fat deposited in this region. The model proposed for TAF (predicted) was: 4.63725 + 0.01483 x AC - 0.00117 x NC - 0.00177 x CC (R-2 = 0.78); and the model proposed for IAF was: IAF (predicted) = 1.88541 + 0.01878 x WC + 0.05687 x NC - 0.01529 x CC (R-2 = 0.51). AC was the only independent predictor of TAF (p < 0.01). Conclusion: The equations proposed showed good correlation with the real value measured by CT, and can be used in clinical practice. (Nutr Hosp. 2012;27:1662-1666) DOI:10.3305/nh.2012.27.5.5933

Mass loss and wear mechanisms of HVOF-sprayed multi-component white cast iron coatings

In this work, multi-component white cast iron was applied by HVOF thermal spray process as alternative to other manufacture processes. Effects of substrate type, substrate pre-heating and heat treatment of coating on mass loss have been determined by rubber wheel apparatus in accordance with ASTM G-65. Furthermore, influence of heat treatment of coating on wear mechanisms was also determined by scanning electron microscopy analysis. Heat-treated coatings presented mass loss three times lower than as-sprayed coatings. Furthermore, wear mechanisms of as-sprayed coating are micro-cutting associated with cracks close to unmelted particles and pores. In heat-treated coating, lesser mass loss is due to sintering. (C) 2011 Elsevier B.V. All rights reserved.

Thermo and mechanical cycling and veneering method do not influence Y-TZP core/veneer interface bond strength

Objectives: The purpose of this study was to evaluate the influence of thermal and mechanical cycling and veneering technique on the shear bond strength of Y-TZP (yttrium oxide partially stabilized tetragonal zirconia polycrystal) core–veneer interfaces. Materials and methods: Cylindrical Y-TZP specimens were veneered either by layering (n = 20) or by pressing technique (n = 20). A metal ceramic group (CoCr) was used as control (n = 20). Ten specimens for each group were thermal and mechanical cycled and then all samples were subjected to shear bond strength in a universal testing machine with a 0.5 mm/min crosshead speed. Mean shear bond strength (MPa) was analysed with a 2-way analysis of variance and Tukey’s test ( p < 0.05). Failure mode was determined using stereomicroscopy and scanning electron microscopy (SEM). Results: Thermal and mechanical cycling had no influence on the shear bond strength for all groups. The CoCr group presented the highest bond strength value ( p < 0.05) (34.72 7.05 MPa). There was no significant difference between Y-TZP veneered by layering (22.46 2.08 MPa) or pressing (23.58 2.1 MPa) technique. Failure modes were predominantly adhesive for CoCr group, and cohesive within veneer for Y-TZP groups. Conclusions: Thermal and mechanical cycling, as well as the veneering technique does not affect Y-TZP core–veneer bond strength. Clinical significance: Different methods of veneering Y-TZP restorations would not influence the clinical performance of the core/veneer interfaces.

Influence of obesity and cardiometabolic makers on lipoprotein-associated phospholipase A2 (Lp-PLA2) activity in adolescents: the healthy young cross-sectional study

Abstract Background Lipoprotein-associated phospholipase A2 activity (Lp-PLA2) is a good marker of cardiovascular risk in adults. It is strongly associated with stroke and many others cardiovascular events. Despite this, the impact of obesity on this enzyme activity and its relation to biomarkers of cardiovascular disease in adolescents is not very well investigated. The purpose of this article is to evaluate the influence of obesity and cardiometabolic markers on Lp-PLA2 activity in adolescents. Results This cross-sectional study included 242 adolescents (10–19 years) of both gender. These subjects were classified in Healthy Weight (n = 77), Overweight (n = 82) and Obese (n = 83) groups. Lipid profile, glucose, insulin, HDL size, LDL(−) and anti-LDL(−) antibodies were analyzed. The Lp-PLA2 activity was determined by a colorimetric commercial kit. Body mass index (BMI), waist circumference and body composition were monitored. Food intake was evaluated using three 24-hour diet recalls. The Lp-PLA2 activity changed in function to high BMI, waist circumference and fat mass percentage. It was also positively associated with HOMA-IR, glucose, insulin and almost all variables of lipid profile. Furthermore, it was negatively related to Apo AI (β = −0.137; P = 0.038) and strongly positively associated with Apo B (β = 0.293; P < 0.001) and with Apo B/Apo AI ratio (β = 0.343; P < 0.001). The better predictor model for enzyme activity, on multivariate analysis, included Apo B/Apo AI (β = 0.327; P < 0.001), HDL size (β = −0.326; P < 0.001), WC (β = 0.171; P = 0.006) and glucose (β = 0.119; P = 0.038). Logistic regression analysis demonstrated that changes in Apo B/Apo AI ratio were associated with a 73.5 times higher risk to elevated Lp-PLA2 activity. Conclusions Lp-PLA2 changes in function of obesity, and that it shows important associations with markers of cardiovascular risk, in particular with waist circumference, glucose, HDL size and Apo B/Apo AI ratio. These results suggest that Lp-PLA2 activity can be a cardiovascular biomarker in adolescence.

Waist circumference and waist circumference to height ratios of Kaingáng indigenous adolescents from the State of Rio Grande do Sul, Brazil

The aim of this study was to describe the distribution of waist circumference (WC) and WC to height (WCTH) values among Kaingáng indigenous adolescents in order to estimate the prevalence of high WCTH values and evaluate the correlation between WC and WCTH and body mass index (BMI)-for-age. A total of 1,803 indigenous adolescents were evaluated using a school-based cross-sectional study. WCTH values > 0.5 were considered high. Higher mean WC and WCTH values were observed for girls in all age categories. WCTH values > 0.5 were observed in 25.68% of the overall sample of adolescents. Mean WC and WCTH values were significantly higher for adolescents with BMI/age z-scores > 2 than for those with normal z-scores. The correlation coefficients of WC and WCTH for BMI/age were r = 0.68 and 0.76, respectively, for boys, and r = 0.79 and 0.80, respectively, for girls. This study highlights elevated mean WC and WCTH values and high prevalence of abdominal obesity among Kaingáng indigenous adolescents.

Connecting accuracy of interchanged prosthetic abutments to different dental implants using scanning electron microscopy

The present study evaluated the interchangeability of prosthetic components for external hexagon implants by measuring the precision of the implant/abutment (I/A) interface with scanning electron microscopy. Ten implants for each of three brands (SIN, Conexão, Neodent) were tested with their respective abutments (milled CoCr collar rotational and non-rotational) and another of an alternative manufacturer (Microplant) in randomly arranged I/A combinations. The degree of interchangeability between the various brands of components was defined using the original abutment interface gap with its respective implant as the benchmark dimension. Accordingly, when the result for a given component placed on an implant was equal to or smaller then that gap measured when the original component of the same brand as the implant was positioned, interchangeability was considered valid. Data were compared with the Kruskal-Wallis test at 5% significance level. Some degree of misfit was observed in all specimens. Generally, the non-rotational component was more accurate than its rotational counterpart. The latter samples ranged from 0.6-16.9 µm, with a 4.6 µm median; and the former from 0.3-12.9 µm, with a 3.4 µm median. Specimens with the abutment and fixture from Conexão had larger microgap than the original set for SIN and Neodent (p<0.05). Even though the latter systems had similar results with their respective components, their interchanged abutments did not reproduce the original accuracy. The results suggest that the alternative brand abutment would have compatibility with all systems while the other brands were not completely interchangeable.

Prevalence of overweight and obesity in elderly people from Vitória-ES, Brazil

The scope of this study was to estimate the prevalence of overweight and obesity and its association with socio-economic status in a sample of non-institutionalized elderly people from Vitória-ES, Brazil. This was a cross-sectional survey with a sample of 882 elderly people aged 60 and over. Obesity and overweight were assessed using the body mass index (BMI) and waist circumference (WC). All subjects answered a personal and socio-demographic questionnaire in relation to age, gender, marital status, physical activity, number of children, chronic diseases and smoking. Associations between categorical variables were tested using chi-square analysis with a 5% significance level. The prevalence of overweight and obesity was high (41.8% and 23.4%, respectively) and 50.7% of the elderly had a substantially increased waist circumference. About 4.3% of the individuals had diabetes, 50.4% had hypertension and 14.9% were found to have both diseases. It was observed that both the BMI and WC were significant associated (p<0.05) with sex, marital status, the presence of diseases and with cigarette smoking.

Tool wear evaluations in friction stir processing of commercial titanium Ti–6Al–4V

This research addresses the application of friction stir welding (FWS) of titanium alloy Ti–6Al–4V. Friction stir welding is a recent process, developed in the 1990s for aluminum joining; this joining process is being increasingly applied in many industries from basic materials, such as steel alloys, to high performance alloys, such as titanium. It is a process in great development and has its economic advantages when compared to conventional welding. For high performance alloys such as titanium, a major problem to overcome is the construction of tools that can withstand the extreme process environment. In the literature, the possibilities approached are only few tungsten alloys. Early experiments with tools made of cemented carbide (WC) showed optimistic results consistent with the literature. It was initially thought that WC tools may be an option to the FSW process since it is possible to improve the wear resistance of the tool. The metallographic analysis of the welds did not show primary defects of voids (tunneling) or similar internal defects due to processing, only defects related to tool wear which can cause loss of weld quality. The severe tool wear caused loss of surface quality and inclusions of fragments inside the joining, which should be corrected or mitigated by means of coating techniques on tool, or the replacement of cemented carbide with tungsten alloys, as found in the literature.

Sintering and model of thermal residual stress for getting cutting tools from functionally gradient materials

Cutting tools with higher wear resistance are those manufactured by powder metallurgy process, which combines the development of materials and design properties, features of shape-making technology and sintering. The annual global market of cutting tools consumes about US$ 12 billion; therefore, any research to improve tool designs and machining process techniques adds value or reduces costs. The aim is to describe the Spark Plasma Sintering (SPS) of cutting tools in functionally gradient materials, to show this structure design suitability through thermal residual stress model and, lastly, to present two kinds of inserts. For this, three cutting tool materials were used (Al2O3-ZrO2, Al2O3-TiC and WC-Co). The samples were sintered by SPS at 1300 °C and 70 MPa. The results showed that mechanical and thermal displacements may be separated during thermal treatment for analysis. Besides, the absence of cracks indicated coherence between experimental results and the residual stresses predicted.