Bearded capuchin monkeys` and a human`s efficiency at cracking palm nuts with stone tools: field experiments

Wild bearded capuchins, Cebus libidinosus, in Fazenda Boa Vista, Brazil crack tough palm nuts using hammer stones. We analysed the contribution of intrinsic factors (body weight, behaviour), size of the nuts and the anvil surface (flat or pit) to the efficiency of cracking. We provided capuchins with local palm nuts and a single hammer stone at an anvil. From video we scored the capuchins` position and actions with the nut prior to each strike, and outcomes of each strike. The most efficient capuchin opened 15 nuts per 100 strikes (6.6 strikes per nut). The least efficient capuchin that succeeded in opening a nut opened 1.32 nuts per 100 strikes (more than 75 strikes per nut). Body weight and diameter of the nut best predicted whether a capuchin would crack a nut on a given strike. All the capuchins consistently placed nuts into pits. To provide an independent analysis of the effect of placing the nut into a pit, we filmed an adult human cracking nuts on the same anvil using the same stone. The human displaced the nut on proportionally fewer strikes when he placed it into a pit rather than on a flat surface. Thus the capuchins placed the nut in a more effective location on the anvil to crack it. Nut cracking as practised by bearded capuchins is a striking example of a plastic behaviour where costs and benefits vary enormously across individuals, and where efficiency requires years to attain. (C) 2009 The Association for the Study of Animal Behaviour. Published by Elsevier Ltd. All rights reserved.

Stone tool use by adult wild bearded capuchin monkeys (Cebus libidinosus). Frequency, efficiency and tool selectivity

Chimpanzees have been the traditional referential models for investigating human evolution and stone tool use by hominins. We enlarge this comparative scenario by describing normative use of hammer stones and anvils in two wild groups of bearded capuchin monkeys (Cebus libidinosus) over one year. We found that most of the individuals habitually use stones and anvils to crack nuts and other encased food items. Further, we found that in adults (1) males use stone tools more frequently than females, (2) males crack high resistance nuts more frequently than females, (3) efficiency at opening a food by percussive tool use varies according to the resistance of the encased food, (4) heavier individuals are more efficient at cracking high resistant nuts than smaller individuals, and (5) to crack open encased foods, both sexes select hammer stones on the basis of material and weight. These findings confirm and extend previous experimental evidence concerning tool selectivity in wild capuchin monkeys (Visalberghi et al., 2009b; Fragaszy et al., 2010b). Male capuchins use tools more frequently than females and body mass is the best predictor of efficiency, but the sexes do not differ in terms of efficiency. We argue that the contrasting pattern of sex differences in capuchins compared with chimpanzees, in which females use tools more frequently and more skillfully than males, may have arisen from the degree of sexual dimorphism in body size of the two species, which is larger in capuchins than in chimpanzees. Our findings show the importance of taking sex and body mass into account as separate variables to assess their role in tool use. (C) 2011 Elsevier Ltd. All rights reserved.

Selection of Effective Stone Tools by Wild Bearded Capuchin Monkeys

Appreciation of objects` affordances and planning is a hallmark of human technology. Archeological evidence suggests that Pliocene hominins selected raw material for tool making [1, 2]. Stone pounding has been considered a precursor to tool making [3, 4], and tool use by living primates provides insight into the origins of material selection by human ancestors. No study has experimentally investigated selectivity of stone tools in wild animals, although chimpanzees appear to select stones according to properties of different nut species [5, 6]. We recently discovered that wild capuchins with terrestrial habits [7] use hammers to crack open nuts on anvils [8-10]. As for chimpanzees, examination of anvil sites suggests stone selectivity [11], but indirect evidence cannot prove it. Here, we demonstrate that capuchins, which last shared a common ancestor with humans 35 million years ago, faced with stones differing in functional features (friability and weight) choose, transport, and use the effective stone to crack nuts. Moreover, when weight cannot be judged by visual attributes, capuchins act to gain information to guide their selection. Thus, planning actions and intentional selection of tools is within the ken of monkeys and similar to the tool activities of hominins and apes.

Attenuation of foot pressure during running on four different surfaces: asphalt, concrete, rubber, and natural grass

The practice of running has consistently increased worldwide, and with it, related lower limb injuries. The type of running surface has been associated with running injury etiology, in addition other factors, such as the relationship between the amount and intensity of training. There is still controversy in the literature regarding the biomechanical effects of different types of running surfaces on foot-floor interaction. The aim of this study was to investigate the influence of running on asphalt, concrete, natural grass, and rubber on in-shoe pressure patterns in adult recreational runners. Forty-seven adult recreational runners ran twice for 40 m on all four different surfaces at 12 +/- 5% km . h(-1). Peak pressure, pressure-time integral, and contact time were recorded by Pedar X insoles. Asphalt and concrete were similar for all plantar variables and pressure zones. Running on grass produced peak pressures 9.3% to 16.6% lower (P < 0.001) than the other surfaces in the rearfoot and 4.7% to 12.3% (P < 0.05) lower in the forefoot. The contact time on rubber was greater than on concrete for the rearfoot and midfoot. The behaviour of rubber was similar to that obtained for the rigid surfaces - concrete and asphalt - possibly because of its time of usage (five years). Running on natural grass attenuates in-shoe plantar pressures in recreational runners. If a runner controls the amount and intensity of practice, running on grass may reduce the total stress on the musculoskeletal system compared with the total musculoskeletal stress when running on more rigid surfaces, such as asphalt and concrete.

Stone tool use in wild bearded capuchin monkeys, Cebus libidinosus. Is it a strategy to overcome food scarcity?

To determine whether tool use varied in relation to food availability in bearded capuchin monkeys, we recorded anvil and stone hammer use in two sympatric wild groups, one of which was provisioned daily, and assessed climatic variables and availability of fruits, invertebrates and palm nuts. Capuchins used tools to crack open encased fruits, mostly palm nuts, throughout the year. Significant differences between wet and dry seasons were found in rainfall, abundance of invertebrates and palm nuts, but not in fruit abundance. Catule nuts were more abundant in the dry season. We tested the predictions of the necessity hypothesis (according to which tool use is maintained by sustenance needs during resource scarcity) and of the opportunity hypothesis (according to which tool use is maintained by repeated exposure to appropriate ecological conditions, such as preferred food resources necessitating the use of tools). Our findings support only the opportunity hypothesis. The rate of tool use was not affected by provisioning, and the monthly rate of tool use was not correlated with the availability of fruits and invertebrates. Conversely, all capuchins cracked food items other than palm nuts (e.g. cashew nuts) when available, and adult males cracked nuts more in the dry season when catule nuts (the most common and exploited nut) are especially abundant. Hence, in our field site capuchins use tools opportunistically. (C) 2012 The Association for the Study of Animal Behaviour. Published by Elsevier Ltd. All rights reserved.

The Bologna Stone: history's first persistent luminescent material

In 1603, the Italian shoemaker Vincenzo Cascariolo found that a stone (baryte) from the outskirts of Bologna emitted light in the dark without any external excitation source. However, the calcination of the baryte was needed prior to this observation. The stone later named as the Bologna Stone was among the first luminescent materials and the first documented material to show persistent luminescence. The mechanism behind the persistent emission in this material has remained a mystery ever since. In this work, the Bologna Stone (BaS) was prepared from the natural baryte (Bologna, Italy) used by Cascariolo. Its properties, e. g. impurities (dopants) and their valences, luminescence, persistent luminescence and trap structure, were compared to those of the pure BaS materials doped with different (transition) metals (Cu, Ag, Pb) known to yield strong luminescence. The work was carried out by using different methods (XANES, TL, VUV-UV-vis luminescence, TGA-DTA, XPD). A plausible mechanism for the persistent luminescence from the Bologna Stone with Cu+ as the emitting species was constructed based on the results obtained. The puzzle of the Bologna Stone can thus be considered as resolved after some 400 years of studies.

Comparison of the n-Alkanes and Polycyclic Aromatic Hydrocarbons Concentrations in the Atmosphere during the Preparation of Warm and Hot Mixtures Asphalt for Pavements

Asphalt binder is used in the production of hot mixes asphalt (HMA) for paving and, due to the high temperatures used, generates fumes thatcontainn-alkanes and polycyclic aromatic hydrocarbons (PAH). Asphalt mixes prepared at lower temperatures, such as warm mixes asphalt (WMA), may contribute to reduce the emissions of those compounds and save energy. This paper investigatesn-alkanes and PAH in the total suspended particles during the preparation of WMA, in comparison with HMA, in laboratory. The results showed that the n-alkanes of the WMA and HMA presented C-max at n-C-26 and n-C-28, respectively; also, the total content of n-alkanes was higher for the HMA than forthe WMA. Besides, benzo[b]fluoranthene and benzo[a]anthracene were the major PAH in the WMA, while the higher temperatures of the HMA were observed to volatilize all larger PAH, demonstrating higher potential of inhalation exposure.

Comparison of the n-alkanes and polycyclic aromatic hydrocarbons concentrations in the atmosphere during the preparation of warm and hot mixtures asphalt for pavements

O asfalto é utilizado na produção de misturas asfálticas a quente (HMA) para a pavimentação e, devido às altas temperaturas empregadas, gera fumos que contêm n-alcanos e hidrocarbonetos policíclicos aromáticos (HPAs). As misturas asfálticas preparadas em temperaturas mais baixas, como as misturas asfálticas mornas (WMA), podem contribuir na redução das emissões daqueles compostos e economizar energia. Este trabalho investiga os n-alcanos e os HPAs nas partículas totais em suspensão durante a preparação de uma WMA, em comparação com uma HMA, em laboratório. Os resultados mostraram que os n-alcanos da WMA e da HMA apresentaram Cmáx no n-C26 e n-C28, respectivamente, e o teor de n-alcanos total foi maior na HMA do que na WMA. Ademais, verificou-se que o benzo[b]fluoranteno e benzo[a]antraceno constituíam os maiores HPAs na WMA, enquanto as temperaturas mais altas da HMA volatilizaram todos seus grandes HPAs, demonstrando maior potencial de exposição por inalação.