Comparative electrical behavior at low and high current of SnO(2)- and ZnO-based varistors

The complete I-V characteristics of SnO(2)-based varistors, particularly of the Pianaro system SCNCr consisting in 98.9%SnO(2)+1%CoO+0.05%Nb(2)O(5)+0.05%Cr(2)O(3), all in mol%, have been seldom reported in the literature. A comparative study at low and high currents of the nonohmic behavior of SCNCr- and ZnO-based varistors (modified Matsuoka system) is proposed in this work. The SCNCr system showed higher nonlinearity coefficients in the whole range of measured current. The electrical breakdown field (E(b)) was twice as high for the SCNCr system (5400 V/cm) than for the ZnO varistor (2600 V/cm) due to a smaller average grain size of the former (4.5 mu m) with respect to the latter (8.5 mu m). Nevertheless, we consider that another important factor responsible for the high E(b) in the SCNCr system is the great number of electrically active interfaces (85%) as determined with electrostatic force microscopy (EFM). It was also established that the SCNCr system might be produced in disks of smaller dimensions than that of commercial ZnO-based product, with a 5.0 cm(-1) minimal area-volume (A/V) ratio. The SCNCr reached the saturation current in a short time because of the high resistivity of the grains, which is five times higher than that of the grains in ZnO-based varistors.

Sorafenib in Combination With Capecitabine: An Oral Regimen for Patients With HER2-Negative Locally Advanced or Metastatic Breast Cancer

Purpose Sorafenib is a multikinase inhibitor with antiangiogenic/antiproliferative activity. A randomized, double-blind, placebo-controlled phase IIB trial assessed sorafenib with capecitabine for locally advanced or metastatic human epidermal growth factor receptor 2 (HER2) -negative breast cancer. Patients and Methods Patients were randomly assigned to first-or second-line capecitabine 1,000 mg/m(2) orally twice a day for days 1 to 14 of every 21-day cycle with sorafenib 400 mg orally twice a day or placebo. The primary end point was progression-free survival (PFS). Results In total, 229 patients were enrolled. The addition of sorafenib to capecitabine resulted in a significant improvement in PFS versus placebo (median, 6.4 v 4.1 months; hazard ratio [HR], 0.58; 95% CI, 0.41 to 0.81; P = .001) with sorafenib favored across subgroups, including first-line (HR, 0.50; 95% CI, 0.30 to 0.82) and second-line (HR, 0.65; 95% CI, 0.41 to 1.04) treatment. There was no significant improvement for overall survival (median, 22.2 v 20.9 months; HR, 0.86; 95% CI, 0.61 to 1.23; P = .42) and overall response (38% v 31%; P = .25). Toxicities (sorafenib v placebo) of any grade included rash (22% v 8%), diarrhea (58% v 30%), mucosal inflammation (33% v 21%), neutropenia (13% v 4%), hypertension (18% v 12%), and hand-foot skin reaction/hand-foot syndrome (HFSR/HFS; 90% v 66%); grade 3 to 4 toxicities were comparable between treatment arms except HFSR/HFS (44% v 14%). Reasons for discontinuation in the sorafenib and placebo arms included disease progression (63% v 82%, respectively), adverse events (20% v 9%, respectively), and death (0% v 1%, respectively). Conclusion Addition of sorafenib to capecitabine improved PFS in patients with HER2-negative advanced breast cancer. The dose of sorafenib used in this trial resulted in unacceptable toxicity for many patients. A phase III confirmatory trial has been initiated with a reduced sorafenib dose.

Limiting the influence of friction on the split Hopkinson pressure bar tests by using a ring specimen

The deformation of a ring under axial compression is analyzed in order to estimate a favorable ring specimen geometry capable of limiting the influence of friction on the stress-strain curve obtained from SHPB tests. The analysis shows that the use of a ring specimen with a large inner diameter and a small radial thickness offers some advantages comparing with the traditional disk sample. In particular, it can improve the reliability of the test results for ductile materials in the presence of friction. Based on the deformation analysis of a ductile ring under compression, a correction coefficient is proposed to relate the actual material stress strain curve with the reading from the SHPB. It is shown using finite element simulation that the proposed correction can be used for a wide range of conventional ductile materials. Experimental results with steel alloys indicate that the correction procedure is an effective technique for an accurate measurement of the dynamic material strength response. (C) 2012 Elsevier Ltd. All rights reserved.

Influence diagnostics in Gaussian spatial linear models

Spatial linear models have been applied in numerous fields such as agriculture, geoscience and environmental sciences, among many others. Spatial dependence structure modelling, using a geostatistical approach, is an indispensable tool to estimate the parameters that define this structure. However, this estimation may be greatly affected by the presence of atypical observations in the sampled data. The purpose of this paper is to use diagnostic techniques to assess the sensitivity of the maximum-likelihood estimators, covariance functions and linear predictor to small perturbations in the data and/or the spatial linear model assumptions. The methodology is illustrated with two real data sets. The results allowed us to conclude that the presence of atypical values in the sample data have a strong influence on thematic maps, changing the spatial dependence structure.

Measurement of prompt J/psi and beauty hadron production cross sections at mid-rapidity in pp collisions at root s=7 TeV

The ALICE experiment at the LHC has studied J/psi production at mid-rapidity in pp collisions at root s = 7 TeV through its electron pair decay on a data sample corresponding to an integrated luminosity L-int = 5.6 nb(-1). The fraction of J/psi from the decay of long-lived beauty hadrons was determined for J/psi candidates with transverse momentum p(t) > 1,3 GeV/c and rapidity vertical bar y vertical bar < 0.9. The cross section for prompt J/psi mesons, i.e. directly produced J/psi and prompt decays of heavier charmonium states such as the psi(2S) and chi(c) resonances, is sigma(prompt J/psi) (p(t) > 1.3 GeV/c, vertical bar y vertical bar < 0.9) = 8.3 +/- 0.8(stat.) +/- 1.1 (syst.)(-1.4)(+1.5) (syst. pol.) mu b. The cross section for the production of b-hadrons decaying to J/psi with p(t) > 1.3 GeV/c and vertical bar y vertical bar < 0.9 is a sigma(J/psi <- hB) (p(t) > 1.3 GeV/c, vertical bar y vertical bar < 0.9) = 1.46 +/- 0.38 (stat.)(-0.32)(+0.26) (syst.) mu b. The results are compared to QCD model predictions. The shape of the p(t) and y distributions of b-quarks predicted by perturbative QCD model calculations are used to extrapolate the measured cross section to derive the b (b) over bar pair total cross section and d sigma/dy at mid-rapidity.

Software para estimativa do custo operacional de máquinas agrícolas - MAQCONTROL

A seleção e a otimização de sistemas mecanizados são os principais objetivos da mecanização racional. Não é suficiente uma compra adequada do maquinário agrícola se sua utilização não for controlada em aspectos operacionais e financeiros. Neste trabalho, é descrito o desenvolvimento de software para estimativa do custo operacional de máquinas agrícolas (MAQCONTROL), utilizando o ambiente de desenvolvimento Borland Delphi e o banco de dados Firebird. Os custos operacionais foram divididos em fixos e variáveis. Nos custos fixos, foram estimadas as despesas com depreciação, juros, alojamento e seguros. Nos custos variáveis, foi dada ênfase aos custos de manutenção como: óleos lubrificantes, filtros, pneus, graxa, combustível, pequenos reparos e troca de peças. Os resultados demonstraram a eficiência do software para os objetivos propostos. Assim, o MAQCONTROL pode ser uma importante ferramenta no processo de administração rural, pois reduz os custos da informação e agiliza a determinação precisa dos custos operacionais de máquinas agrícolas.