10 resultados para Louis XVI, King of France, 1754-1793.

em Biblioteca Digital da Produção Intelectual da Universidade de São Paulo


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Premise of the study: Microsatellite loci were developed for tucuma of Amazonas (Astrocaryum aculeatum), and cross-species amplification was performed in six other Arecaceae, to investigate genetic diversity and population structure and to provide support for natural populations management. Methods and Results: Fourteen microsatellite loci were isolated from a microsatellite-enriched genomic library and used to characterize two wild populations of tucuma of Amazonas (Manaus and Manicore cities). The investigated loci displayed high polymorphism for both A. aculeatum populations, with a mean observed heterozygosity of 0.498. Amplification rates ranging from 50% to 93% were found for four Astrocaryum species and two additional species of Arecaceae. Conclusions: The information derived from the microsatellite markers developed here provides significant gains in conserved allelic richness and supports the implementation of several molecular breeding strategies for the Amazonian tucuma.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Known as the "king of spices", black pepper (Piper nigrum), a perennial crop of the tropics, is economically the most important and the most widely used spice crop in the world. To understand its suitable bioclimatic distribution, maximum entropy based on ecological niche modeling was used to model the bioclimatic niches of the species in its Asian range. Based on known occurrences, bioclimatic areas with higher probabilities are mainly located in the eastern and western coasts of the Indian Peninsula, the east of Sumatra Island, some areas in the Malay Archipelago, and the southeast coastal areas of China. Some undocumented places were also predicted as suitable areas. According to the jackknife procedure, the minimum temperature of the coldest month, the mean monthly temperature range, and the precipitation of the wettest month were identified as highly effective factors in the distribution of black pepper and could possibly account for the crop's distribution pattern. Such climatic requirements inhibited this species from dispersing and gaining a larger geographical range.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Premise of the study: A set of eight microsatellite (simple sequence repeat [SSR]) markers for Lippia alba, an important medicinal and cosmetic plant, was developed to aid studies of genetic diversity and to define efficient strategies for breeding programs. Methods and Results: Using a (CT)(8)- and (GT)(8)-enriched library, a total of 11 SSR loci were developed and optimized in L. alba. Of the 11 loci, eight were found to be polymorphic after screening 61 accessions from two populations. The parameters used to characterize loci were expected heterozygosity (H-e) and number of alleles. A total of 44 alleles were identified, with an average of 5.5 alleles per loci, which were moderately to highly informative according to H-e. Conclusions: These new SSR markers have potential for informing genetic diversity, allele mining, and mapping studies and will be used to generate information for breeding programs of L. alba

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Premise of the study: Microsatellite primers were developed for Jatropha curcas (Euphorbiaceae), a tree species with large potential for biofuel production, to investigate its natural genetic diversity and mating system to facilitate the establishment of tree improvement and conservation programs. Methods and Results: Using a protocol for genomic library enrichment, 104 clones containing 195 repeat motifs were identified. Primer pairs were developed for 40 microsatellite loci and validated in 41 accessions of J. curcas from six provenances. Nine loci were polymorphic revealing from two to eight alleles per locus, and six primers were able to amplify alleles in the congeners J. podagrica, J. pohliana, and J. gossypifolia, but not in other Euphorbiaceae species, such as Hevea brasiliensis, Manihot esculenta, or Ricinus communis. Conclusions: The primers developed here revealed polymorphic loci that are suitable for genetic diversity and structure, mating system, and gene flow studies in J. curcas, and some congeners.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Premise of the study: We developed and characterized nuclear microsatellite markers for Anadenanthera colubrina, a tropical tree species widely distributed in South America. Methods and Results: Leaf samples of mature A. colubrina trees, popularly called "angico," were collected from an area that is greatly impacted by agricultural practices in the region of Ribeirao Preto in Sao Paulo State in southeastern Brazil. Twenty simple sequence repeat (SSR) markers were developed, 14 of which had polymorphic loci. A total of 96 alleles were detected with an average of 6.86 alleles per polymorphic locus. The expected heterozygosity, calculated at polymorphic loci, ranged from 0.18 to 0.83. Finally, we demonstrated that 18 loci were cross-amplified in A. peregrina. Conclusions: A total of 14 polymorphic markers suggest a high potential for genetic diversity, gene flow, and mating system analyses in A. colubrina.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Premise of the study: Microsatellite primers were developed to investigate genetic diversity and population structure of Qualea grandiflora, a typical species of the Brazilian cerrado. Methods and Results: Eight microsatellite loci were isolated using an enrichment cloning protocol. These loci were tested on a population of 110 individuals of Q. grandiflora collected from a cerrado fragment in Sao Paulo State, Brazil. The loci polymorphism ranges from seven to 19 alleles and the average heterozygosity value is 0.568, while the average polymorphic information content is 0.799. Conclusions: The developed markers were found to be highly polymorphic, indicating their applicability to studies of population genetic diversity in Q. grandiflora

Relevância:

100.00% 100.00%

Publicador:

Resumo:

We present STAR measurements of azimuthal anisotropy by means of the two- and four-particle cumulants nu(2) (nu(2){2} and nu(2){4}) for Au + Au and Cu + Cu collisions at center-of-mass energies root S-NN = 62.4 and 200 GeV. The difference between nu(2){2}(2) and nu(2){4}(2) is related to nu(2) fluctuations (sigma(nu 2)) and nonflow (delta(2)). We present an upper limit to sigma(nu 2)/nu 2. Following the assumption that eccentricity fluctuations sigma(epsilon) dominate nu(2) fluctuations nu(2)/sigma nu(2) approximate to epsilon/sigma epsilon we deduce the nonflow implied for several models of eccentricity fluctuations that would be required for consistency with nu(2){2} and nu(2){4}. We also present results on the ratio of nu(2) to eccentricity.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Introduction: The aim of this prospective clinical study was to investigate the cephalometric changes produced by bonded spurs associated with high-pull chincup therapy in children with Angle Class I malocclusion and anterior open bite. Methods: Thirty patients with an initial mean age of 8.14 years and a mean anterior open bite of 3.93 mm were treated with bonded spurs associated with chincup therapy for 12 months. An untreated control group of 30 subjects with an initial mean age of 8.36 years and a mean anterior open bite of 3.93 mm and the same malocclusion was followed for 12 months for comparison. Student t tests were used for intergroup comparisons. Results: The treated group demonstrated a significantly greater decrease of the gonial angle, and increase in overbite, palatal tipping of the maxillary incisors, and vertical dentoalveolar development of the maxillary and mandibular incisors compared with the control group. Conclusions: The association of bonded spurs with high-pull chincup therapy was efficient for the correction of the open bite in 86.7% of the patients, with a 5.23-mm (SD, 61.69) overbite increase.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Statement of problem: Since the introduction of glass fiber posts, irreversible vertical root fractures have become a rare occurrence; however, adhesive failure has become the primary failure mode. Purpose: The purpose of this study was to evaluate the push-out bond strength of glass fiber posts cemented with different luting agents on 3 segments of the root. Material and methods: Eighty human maxillary canines with similar root lengths were randomly divided into 8 groups (n=10) according to the cement assessed (Rely X luting, Luting and Lining, Ketac Cem, Rely X ARC, Biscem, Duo-link, Rely X U100, and Variolink II). After standardized post space preparation, the root dentin was pretreated for dualpolymerizing resin cements and untreated for the other cements. The mixed luting cement paste was inserted into post spaces with a spiral file and applied to the post surface that was seated into the canal. After 7 days, the teeth were sectioned perpendicular to their long axis into 1-mm-thick sections. The push-out test was performed at a speed of 0.5 mm/min until extrusion of the post occurred. The results were evaluated by 2-way ANOVA and the all pairwise multiple comparison procedures (Tukey test) (?=.05). Results: ANOVA showed that the type of interaction between cement and root location significantly influenced the push-out strength (P<.05). The highest push-out strength results with root location were obtained with Luting and Lining (S3) (19.5 ±4.9 MPa), Ketac Cem (S2) (18.6 ±5.5 MPa), and Luting and Lining (S1) (18.0 ±7.6 MPa). The lowest mean values were recorded with Variolink II (S1) (4.6 ±4.0 MPa), Variolink II (S2) (1.6 ±1.5 MPa), and Rely X ARC (S3) (0.9 ±1.1 MPa). Conclusions: Self-adhesive cements and glass ionomer cements showed significantly higher values compared to dual-polymerizing resin cements. In all root segments, dual-polymerizing resin cements provided significantly lower bond strength. Significant differences among root segments were found only for Duo-link cement.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Statement of problem: Resin cements are widely used to cement intraradicular posts, but bond strength is significantly influenced by the technique and material used for cementation. Purpose: The purpose of this study was to evaluate the bond strength of 3 self-adhesive cements used to cement intraradicular glass fiber posts. The cements all required different application and handling techniques. Material and Methods: Forty-five human maxillary canines were selected and randomly divided into 3 groups n= 15 by drawing lots: Group BIS – Biscem, Group BRE – Breeze, and Group MAX – Maxcem. Each group was divided into 3 subgroups according to application and handling techniques: Sub-group A – Automix/Point tip applicator, Sub-group L – Handmix/Lentulo, and Sub-group C – Handmix/Centrix. Cementation of the posts was performed according to the manufacturers’ instructions. The push-out test was performed with a crosshead speed of 0.5 mm/min, and bond strength was expressed in megapascals. The results were evaluated by 2-way ANOVA and the all pairwise multiple comparison procedures (Tukey test) (?=.05). Results: Breeze cement showed the highest average for the subgroups A, L, and C when compared to the Biscem cement and Maxcem Elite (P<.05). Statistically significant differences among the subgroups were only observed for Biscem. Conclusions: This study shows that application and handling techniques may influence the bond strength of different self-adhesive cements when used for intraradicular post cementation.