Spatial analysis of egg distribution and geographic changes in the spawning habitat of the Brazilian sardine Sardinella brasiliensis

This paper establishes the spawning habitat of the Brazilian sardine Sardinella brasiliensis and investigates the spatial variability of egg density and its relation with oceanographic conditions in the shelf of the south-east Brazil Bight (SBB). The spawning habitats of S. brasiliensis have been defined in terms of spatial models of egg density, temperature-salinity plots, quotient (Q) analysis and remote sensing data. Quotient curves (Q(C)) were constructed using the geographic distribution of egg density, temperature and salinity from samples collected during nine survey cruises between 1976 and 1993. The interannual sea surface temperature (SST) variability was determined using principal component analysis on the SST anomalies (SSTA) estimated from remote sensing data over the period between 1985 and 2007. The spatial pattern of egg occurrences in the SBB indicated that the largest concentration occurred between Paranagua and Sao Sebastiao. Spawning habitat expanded and contracted during the years, fluctuating around Paranagua. In January 1978 and January 1993, eggs were found nearly everywhere along the inner shelf of the SBB, while in January 1988 and 1991 spawning had contracted to their southernmost position. The SSTA maps for the spawning periods showed that in the case of habitat expansion (1993 only) anomalies over the SBB were zero or slightly negative, whereas for the contraction period anomalies were all positive. Sardinella brasiliensis is capable of exploring suitable spawning sites provided by the entrainment of the colder and less-saline South Atlantic Central Water onto the shelf by means of both coastal wind-driven (to the north-east of the SBB) and meander-induced (to the south-west of the SBB) upwelling.

Rediscovery and redescription of the unusual subterranean characiform Stygichthys typhlops, with notes on its life history

The rediscovery of the enigmatic subterranean characiform Stygichthys typhlops is reported almost a half-century after the collection of the holotype, the only specimen previously known. Thirty-four specimens were collected in two shallow hand-dug wells at the region of the type locality, c. 13 km south-west of the town of Jaiba, Minas Gerais, Brazil. These specimens provide new information on the morphology of this species, and for the first time on its life history. The conservation status of S. typhlops is discussed. The species is severely threatened by habitat loss caused by exploitation of the aquifer. (C) 2010 The Authors Journal compilation (C) 2010 The Fisheries Society of the British Isles

Knodus dorsomaculatus (Characiformes: Characidae), a new species from Teles Pires River, Tapajos River basin, Brazil

Knodus dorsomaculatus, a new species, is described from Teles Pires River, a tributary of the Tapajos River, Brazil. It can be distinguished from its congeners by the presence of a conspicuous dark blotch on the base of the first five branched dorsal fin rays and the presence of ii,9 dorsal fin rays. Additional comparisons between K. dorsomaculatus and its congeners are presented.

New species of Moenkhausia Eigenmann (Characiformes: Characidae) from Rio Xingu and Rio Tapajos basins, Brazil, with comments on a putative case of polymorphic Batesian mimicry

A new species of Moenkhausia is described from Rio Xingu and Rio Tapajos basins, Brazil. The new species is distinguished from its congeners, except from Moenkhausia moisae, by having more scales in the lateral series, 43-47 (v. 23-41 in the remaining congeners). The new species is distinguished from M. moisae by its colour pattern, which consists of a dark midlateral stripe, and an asymmetrical caudal blotch (inconspicuous or faded in specimens from the Rio Arinos) continuous with the midlateral stripe (v. narrow dark midlateral line and conspicuous, regularly rounded and symmetrical blotch not continuous with the midlateral line). The new species is putatively assumed to be mimetic to Jupiaba apenima, in the Rio Xingu and Rio Teles Pires drainages, and to Jupiaba yarina in the Rio Arinos. The two species of Jupiaba are sympatric and remarkably similar in size, general external morphology and colouration to the new species. A small difference occurs in the colouration between the two species of Jupiaba and is also observed in the two respectively sympatric morphotypes of the new species of Moenkhausia. The occurrence of polymorphic Batesian mimicry is therefore discussed for neotropical freshwater fishes. (C) 2009 The Authors Journal compilation (C) 2009 The Fisheries Society of the British Isles

The northernmost record of Bassanago albescens and comments on the occurrence of Rhynchoconger guppyi (Teleostei: Anguilliformes: Congridae) along the Brazilian coast

The northernmost occurrence of Bassanago albescens in the western Atlantic Ocean (off the coast of Rio de Janeiro, Brazil) is presented and compared with the available data on this species. Specimens formerly identified as Rhynchoconger guppyi from off the southern Brazilian coast are regarded as B. albescens. (C) 2010 The Authors

Reproductive biology of the smooth butterfly ray Gymnura micrura

This study provides the first detailed information on the reproductive biology of the smooth butterfly ray Gymnura micrura. A total of 905 individuals were sampled, 377 of which were used for the reproductive study. Juveniles accounted for 75% of the sample, but all life cycle stages were present in the study area. The disc width at which 50% were mature (WD50)was estimated at 269 and 405 mm for males and females, respectively. The WD50V(based on the onset of vitellogenesis) was estimated at 359 mm. Uterine fecundity (mean +/- s.d. = 3.8 +/- 1.3; range: 16) was positively correlated with female size. A 3564% gain in mean wet mass was observed from egg to full-term embryo in utero. Size at birth ranged from 135 to 175 mm WD (19.5 to 55.0 g), with a mean of 165.1 mm WD (43.3 g). The embryo sex ratio was not significantly different from 1:1. The ovaries of pregnant females were undergoing vitellogenesis during gestation, with females ready to ovulate soon after parturition. Gymnura micrura may have an asynchronous reproductive cycle, with females reproducing continuously throughout the year.

The contrasting role of heterochromatin in the differentiation of sex chromosomes: an overview from Neotropical fishes

During the evolutionary process of the sex chromosomes, a general principle that arises is that cessation or a partial restriction of recombination between the sex chromosome pair is necessary. Data from phylogenetically distinct organisms reveal that this phenomenon is frequently associated with the accumulation of heterochromatin in the sex chromosomes. Fish species emerge as excellent models to study this phenomenon because they have much younger sex chromosomes compared to higher vertebrates and many other organisms making it possible to follow their steps of differentiation. In several Neotropical fish species, the heterochromatinization, accompanied by amplification of tandem repeats, represents an important step in the morphological differentiation of simple sex chromosome systems, especially in the ZZ/ZW sex systems. In contrast, multiple sex chromosome systems have no additional increase of heterochromatin in the chromosomes. Thus, the initial stage of differentiation of the multiple sex chromosome systems seems to be associated with proper chromosomal rearrangements, whereas the simple sex chromosome systems have an accumulation of heterochromatin. In this review, attention has been drawn to this contrasting role of heterochromatin in the differentiation of simple and multiple sex chromosomes of Neotropical fishes, highlighting their surprising evolutionary dynamism.

Feeding ecology of the American freshwater goby Ctenogobius shufeldti (Gobiidae, Perciformes) in a sub-tropical estuary

The feeding ecology of the American freshwater goby Ctenogobius shufeldti in a low salinity salt-marsh habitat in the Paranagua Bay estuarine complex (Brazil) was assessed through the gut analysis of 632 individuals. The effects of a set of abiotic factors (type of sediment, salinity, temperature and estuarine reach), season and body size on dietary composition were analysed. Seasonal and size-related changes in feeding strategy, feeding intensity and trophic level were assessed. The effects of gape and body size on prey size use were also analysed. The results showed that C. shufeldti is a typical omnivorous, generalized benthic predator of low trophic levels throughout the seasons and size classes, feeding on 56 dietary items; tanaids, chlorophyte algae, ostracods, gastropods, detritus and benthic diatoms made up the bulk of its diet. The tanaid Kalliapseudes schubarti was the main prey item in both numerical and volumetric terms. The gut fullness was persistently high across the seasons. As expected for a typical generalized, opportunistic omnivorous feeder: (1) seasonal and spatial-temporal variability of abiotic factors had a significant effect on diet structure, (2) season accounted for most of the dietary variation and (3) diet composition and the size of prey consumed did not vary across the size classes.

Regularity at infinity of real mappings and a Morse-Sard theorem

We prove a new Morse-Sard-type theorem for the asymptotic critical values of semi-algebraic mappings and a new fibration theorem at infinity for C-2 mappings. We show the equivalence of three different types of regularity conditions which have been used in the literature in order to control the asymptotic behaviour of mappings. The central role of our picture is played by the p-regularity and its bridge toward the rho-regularity which implies topological triviality at infinity.

Lasiodiplodan, an exocellular (1 -> 6)-beta-d-glucan from Lasiodiplodia theobromae MMPI: production on glucose, fermentation kinetics, rheology and anti-proliferative activity

Lasiodiplodan, an exopolysaccharide of the (1 -> 6)-beta-d-glucan type, is produced by Lasiodiplodia theobromae MMPI when grown under submerged culture on glucose. The objective of this study was to evaluate lasiodiplodan production by examining the effects of carbon (glucose, fructose, maltose, sucrose) and nitrogen sources (KNO3, (NH4)(2)SO4, urea, yeast extract, peptone), its production in shake flasks compared to a stirred-tank bioreactor, and to study the rheology of lasiodiplodan, and lasiodiplodan's anti-proliferative effect on breast cancer MCF-7 cells. Although glucose (2.05 +/- A 0.05 g L-1), maltose (2.08 +/- A 0.04 g L-1) and yeast extract (2.46 +/- A 0.06 g L-1) produced the highest amounts of lasiodiplodan, urea as N source resulted in more lasiodiplodan per unit biomass than yeast extract (0.74 +/- A 0.006 vs. 0.22 +/- A 0.008 g g(-1)). A comparison of the fermentative parameters of L. theobromae MMPI in shake flasks and a stirred-tank bioreactor at 120 h on glucose as carbon source showed maximum lasiodiplodan production in agitated flasks (7.01 +/- A 0.07 g L-1) with a specific yield of 0.25 +/- A 0.57 g g(-1) and a volumetric productivity of 0.06 +/- A 0.001 g L-1 h(-1). A factorial 2(2) statistical design developed to evaluate the effect of glucose concentration (20-60 g L-1) and impeller speed (100-200 rpm) on lasiodiplodan production in the bioreactor showed the highest production (6.32 g L-1) at 72 h. Lasiodiplodan presented pseudoplastic behaviour, and the apparent viscosity increased at 60A degrees C in the presence of CaCl2. Anti-proliferative activity of lasiodiplodan was demonstrated in MCF-7 cells, which was time- and dose-dependent with an IC50 of 100 mu g lasiodiplodan mL(-1).

Issues on the mean stress effect in fretting fatigue of a 7050-T7451 Al alloy posed by new experimental data

The aims of this work are: (i) to produce new experimental data for fretting fatigue considering the presence of a mean bulk stress and (ii) to assess two design methodologies against failure by fretting fatigue. Tests on a cylinder–flat contact configuration were conducted using a fretting apparatus mounted on a servo-hydraulic machine. The material used for both the pads and fatigue specimen was an aeronautical 7050-T7451 Al alloy. The experimental program was designed with all relevant parameters, apart from the mean bulk load (always applied before the contact loads), kept constant. The mean bulk stress varied from compressive to tensile values while maintaining a high peak pressure in order to encourage crack initiation. Two methodologies against fretting fatigue are proposed and confronted against the experimental data. The non-local stress-based methodology considers the evaluation of a critical plane fatigue criterion at the center of a process zone located beneath the contacting surfaces. The results showed that it correctly predicts crack initiation, but was not capable to provide successful prediction of the integrity of the specimens. Alternatively, we considered a crack arrest criterion which has the potential to provide a more complete description about the integrity of the specimens.