Influence of prior 810-nm-diode intracanal laser irradiation on hydrophilic resin-based sealer obturation

Dentin wall structural changes caused by 810-nm-diode laser irradiation can influence the sealing ability of endodontic sealers. The objective of this study was to evaluate the apical leakage of AH Plus and RealSeal resin-based sealers with and without prior diode laser irradiation. Fifty-two single-rooted mandibular premolars were prepared and divided into 4 groups, according to the endodontic sealer used and the use or non-use of laser irradiation. The protocol for laser irradiation was 2.5W, continuous wave in scanning mode, with 4 exposures per tooth. After sample preparation, apical leakage of 50% ammoniacal silver nitrate impregnation was analyzed. When the teeth were not exposed to irradiation, the Real Seal sealer achieved the highest scores, showing the least leakage, with significant differences at the 5% level (Kruskal-Wallis test, p = 0.0004), compared with AH Plus. When the teeth were exposed to the 810-nm-diode laser irradiation, the sealing ability of AH Plus sealer was improved (p = 0282). In the Real Seal groups, the intracanal laser irradiation did not interfere with the leakage index, showing similar results in the GRS and GRSd groups (p = 0.1009).

Autoantibodies and High-Risk HLA Susceptibility Markers in First-Degree Relatives of Brazilian Patients with Type 1 Diabetes Mellitus: A Progression to Disease Based Study

The objective of this study was to determine the frequencies of autoantibodies to heterogeneous islet-cell cytoplasmic antigens (ICA), glutamic acid decarboxylase(65) (GAD(65)A), insulinoma-associated antigen-2 (IA-2A) and insulin (IAA)-and human leukocyte antigen (HLA) class II markers (HLA-DR and -DQ) in first degree relatives of heterogeneous Brazilian patients with type I diabetes(T1DM). A major focus of this study was to determine the influence of age, gender, proband characteristics and ancestry on the prevalence of autoantibodies and HLA-DR and -DQ alleles on disease progression and genetic predisposition to T1DM among the first-degree relatives. IAA, ICA, GAD(65)A, IA-2A and HLA- class II alleles were determined in 546 first-degree-relatives, 244 siblings, 55 offspring and 233 parents of 178 Brazilian patients with T1DM. Overall, 8.9% of the relatives were positive for one or more autoantibodies. IAA was the only antibody detected in parents. GAD(65) was the most prevalent antibody in offspring and siblings as compared to parents and it was the sole antibody detected in offspring. Five siblings were positive for the IA-2 antibody. A significant number (62.1%) of siblings had 1 or 2 high risk HLA haplotypes. During a 4-year follow-up study, 5 siblings (expressing HLA-DR3 or -DR4 alleles) and 1 offspring positive for GAD(65)A progressed to diabetes. The data indicated that the GAD(65) and IA-2 antibodies were the strongest predictors of T1DM in our study population. The high risk HLA haplotypes alone were not predictive of progression to overt diabetes.

Lipid Peroxidation Is Associated with the Severity of Periodontal Disease and Local Inflammatory Markers in Patients with Type 2 Diabetes

Context: Periodontitis is the most common lytic disease of bone and is recognized as a common complication of diabetes. Lipid peroxidation (LPO) is increased in diabetes and may be related to modulation of the inflammatory response. LPO levels in patients with diabetes and periodontal disease have not been evaluated. Objective: The aim of this study was to evaluate the levels of LPO and its correlation with periodontal status and inflammatory cytokines in type 2 diabetic and nondiabetic patients. Design and Setting: This is a cross-sectional study involving Brazilian patients recruited at the State University of Sao Paulo. Patients: The sample comprised 120 patients divided into four groups based upon diabetic and dyslipidemic status: poorly controlled diabetics with dyslipidemia, well-controlled diabetics with dyslipidemia, normoglycemic individuals with dyslipidemia, and healthy individuals. Main Outcome Measures: Blood analyses were carried out for fasting plasma glucose, glycated hemoglobin, and lipid profile. Periodontal examinations were performed, and gingival crevicular fluid was collected. LPO levels were evaluated by measuring oxidized low-density lipoprotein (ELISA) and malondialdehyde (HPLC). Cytokines were evaluated by the multiplex bead technique. Results: LPO evaluated by malondialdehyde in plasma and gingival crevicular fluid was significantly increased in diabetes groups. Significant correlations between LPO markers and periodontal parameters indicate a direct relationship between these levels and the severity of inflammation and secretion of inflammatory cytokines, particularly in diabetic patients. Conclusion: These findings suggest an important association for LPO with the severity of the local inflammatory response to bacteria and the susceptibility to periodontal disease in diabetic patients. (J Clin Endocrinol Metab 97: E1353-E1362, 2012)

Physical properties of edible films based on bovine myofibril proteins

Myofibril proteins have excellent filmogenic properties. The objective of this article was to study the effect of the thermal treatment, of the pH and of the plasticizer concentration (Cp) of the filmogenic solution (FS), using over some physical properties of edible films, using a surface and response methodology (SRM). Films were made of lyophilized myofibril proteins (LMP) extracted from bovine muscle, employing the technique of solubility obtained from diluted saline solutions. The films were elaborated from FS containing 1 g of LMP/100g of FS and from Cp of 50 g to 79 g of glycerin/100 g of LMP. The LMP was dispersed in water under moderate agitation, and the pH was kept at 2.5-3.5 with the use of acetic acid. The FS were submitted to thermal treatment at different temperatures for 45 minutes. Films were dried in ventilated oven at 37 degrees C/18hr, conditioned at 75% of relative humidity at 25 degrees C/48 hr before analysis of: mechanical properties by puncture test; apparent opacity by spectrophotometer; solubility by immersion in water; and water vapor permeability by the gravimetric method. In general, films showed good appearance, translucent, easily handled and touchable, except for the films formed with pH 2.5 and at a low temperature (35 degrees C), with a medium thickness of 0.400 +/- 0.005 mm. The pH of the FS significantly affected all the physical properties under study. The temperature of the thermal treatment of the FS greatly affected the force at the rupture, solubility and water vapor permeability. This treatment can promote intermolecular interactions through the formation of disulphide bonds; however a very intense treatment can reverse this effect by irreversible structural alterations in the proteins. The glycerol concentration affected considerably all the properties under study, with the exception of the apparent opacity. Plasticizer increases the mobility of macromolecules with consequences in all physical properties.

Development of a recombinant fusion protein based on the dynein light chain LC8 for non-viral gene delivery

The low efficiency of gene transfer is a recurrent problem in DNA vaccine development and gene therapy studies using non-viral vectors such as plasmid DNA (pDNA). This is mainly due to the fact that during their traffic to the target cell's nuclei, plasmid vectors must overcome a series of physical, enzymatic and diffusional barriers. The main objective of this work is the development of recombinant proteins specifically designed for pDNA delivery, which take advantage of molecular motors like dynein, for the transport of cargos from the periphery to the centrosome of mammalian cells. A DNA binding sequence was fused to the N-terminus of the recombinant human dynein light chain LC8. Expression studies indicated that the fusion protein was correctly expressed in soluble form using E. coli BL21(DE3) strain. As expected, gel permeation assays found the purified protein mainly present as dimers, the functional oligomeric state of LC8. Gel retardation assays and atomic force microscopy proved the ability of the fusion protein to interact and condense pDNA. Zeta potential measurements indicated that LC8 with DNA binding domain (LD4) has an enhanced capacity to interact and condense pDNA, generating positively charged complexes. Transfection of cultured HeLa cells confirmed the ability of the LD4 to facilitate pDNA uptake and indicate the involvement of the retrograde transport in the intracellular trafficking of pDNA: LD4 complexes. Finally, cytotoxicity studies demonstrated a very low toxicity of the fusion protein vector, indicating the potential for in vivo applications. The study presented here is part of an effort to develop new modular shuttle proteins able to take advantage of strategies used by viruses to infect mammalian cells, aiming to provide new tools for gene therapy and DNA vaccination studies. (C) 2012 Elsevier B.V. All rights reserved.

A fragment-based approach for ligand binding affinity and selectivity for the liver X receptor beta

Selective modulation of liver X receptor beta (LXR beta) has been recognized as an important approach to prevent or reverse the atherosclerotic process. In the present work, we have developed robust conformation-independent fragment-based quantitative structure-activity and structure-selectivity relationship models for a series of quinolines and cinnolines as potent modulators of the two LXR sub-types. The generated models were then used to predict the potency of an external test set and the predicted values were in good agreement with the experimental results, indicating the potential of the models for untested compounds. The final 2D molecular recognition patterns obtained were integrated to 3D structure-based molecular modeling studies to provide useful insights into the chemical and structural determinants for increased LXR beta binding affinity and selectivity. (C) 2011 Elsevier Inc. All rights reserved.

A tellurium-based cathepsin B inhibitor: Molecular structure, modelling, molecular docking and biological evaluation

The crystallographically determined structure of biologically active 4,4-dichloro-1,3-diphenyl-4-telluraoct-2-en-1-one, 3, shows the coordination geometry for Te to be distorted psi-pentagonal bipyramidal based on a C2OCl3(lone pair) donor set. Notable is the presence of an intramolecular axial Te center dot center dot center dot O (carbonyl) interaction, a design element included to reduce hydrolysis. Raman and molecular modelling studies indicate the persistence of the Te center dot center dot center dot O(carbonyl) interaction in the solution (CHCl3) and gasphases, respectively. Docking studies of 3' (i.e. original 3 less one chloride) with Cathepsin B reveals a change in the configuration about the vinyl C = C bond. i.e. to E from Z (crystal structure). This isomerism allows the optimisation of interactions in the complex which features a covalent Te-SGCys29 bond. Crucially, the E configuration observed for 3' allows for the formation of a hypervalent Te center dot center dot center dot O interaction as well as an O center dot center dot center dot H-O hydrogen bond with the Gly27 and Glu122 residues, respectively. Additional stabilisation is afforded by a combination of interactions spanning the S1, S2, S1' and S2' sub-sites of Cathepsin B. The greater experimental inhibitory activity of 3 compared with analogues is rationalised by the additional interactions formed between 3' and the His110 and His111 residues in the occluding loop, which serve to hinder the entrance to the active site. (C) 2012 Elsevier B.V. All rights reserved.

An economic evaluation of antihypertensive therapies based on clinical trials

OBJECTIVE: Hypertension is a major issue in public health, and the financial costs associated with hypertension continue to increase. Cost-effectiveness studies focusing on antihypertensive drug combinations, however, have been scarce. The cost-effectiveness ratios of the traditional treatment (hydrochlorothiazide and atenolol) and the current treatment (losartan and amlodipine) were evaluated in patients with grade 1 or 2 hypertension (HT1-2). For patients with grade 3 hypertension (HT3), a third drug was added to the treatment combinations: enalapril was added to the traditional treatment, and hydrochlorothiazide was added to the current treatment. METHODS: Hypertension treatment costs were estimated on the basis of the purchase prices of the antihypertensive medications, and effectiveness was measured as the reduction in systolic blood pressure and diastolic blood pressure (in mm Hg) at the end of a 12-month study period. RESULTS: When the purchase price of the brand-name medication was used to calculate the cost, the traditional treatment presented a lower cost-effectiveness ratio [US$/mm Hg] than the current treatment in the HT1-2 group. In the HT3 group, however, there was no difference in cost-effectiveness ratio between the traditional treatment and the current treatment. The cost-effectiveness ratio differences between the treatment regimens maintained the same pattern when the purchase price of the lower-cost medication was used. CONCLUSIONS: We conclude that the traditional treatment is more cost-effective (US$/mm Hg) than the current treatment in the HT1-2 group. There was no difference in cost-effectiveness between the traditional treatment and the current treatment for the HT3 group.

Clinical Diagnosis of Pulp Inflammation Based on Pulp Oxygenation Rates Measured by Pulse Oximetry

Introduction: The objective of this study was to investigate correlations between pulp oxygenation rates (%SpO(2)) and clinical diagnoses of reversible pulpitis (RP), irreversible pulpitis (IP), or pulp necrosis (PN). Methods: Sixty patients who presented with a tooth with endodontic pathology were grouped according to a clinical diagnosis of either RP (n = 20), IP (n = 20), or PN (n = 20). The clinical diagnosis was based on the patient's dental history, periapical radiographs, clinical inspection, and percussion and thermal sensitivity testing. Pulse oximetry (PO) was used to determine pulp oxygenation rates. For every patient, one additional endodontically treated tooth (negative control [NC], n = 60) and one additional healthy tooth with healthy pulp status (positive control [PC], n = 60) were evaluated. Analysis of variance, the Tukey HSD test, and the Student's t test were used for statistical analysis. Results: The mean % SpO(2) levels were as follows: RP: 87.4% (standard deviation [SD] +/- 2.46), IP: 83.1% (SD +/- 2.29), PN: 74.6% (SD +/- 1.96), PC: 92.2% (SD +/- 1.84), and NC: 0% (SD +/- 0.0). There were statistically significant differences between RP, IP, and PM compared with NC and PC and between RP, IP, and PN (all P <= .01). Conclusions: The evaluation of pulp oxygenation rates by PO may be a useful tool to determine the different inflammatory stages of the pulp to aid in endodontic diagnosis. (JEndod 2012;38:880-883)

Computer game-based and traditional learning method: a comparison regarding students’ knowledge retention

Abstract Background Educational computer games are examples of computer-assisted learning objects, representing an educational strategy of growing interest. Given the changes in the digital world over the last decades, students of the current generation expect technology to be used in advancing their learning requiring a need to change traditional passive learning methodologies to an active multisensory experimental learning methodology. The objective of this study was to compare a computer game-based learning method with a traditional learning method, regarding learning gains and knowledge retention, as means of teaching head and neck Anatomy and Physiology to Speech-Language and Hearing pathology undergraduate students. Methods Students were randomized to participate to one of the learning methods and the data analyst was blinded to which method of learning the students had received. Students’ prior knowledge (i.e. before undergoing the learning method), short-term knowledge retention and long-term knowledge retention (i.e. six months after undergoing the learning method) were assessed with a multiple choice questionnaire. Students’ performance was compared considering the three moments of assessment for both for the mean total score and for separated mean scores for Anatomy questions and for Physiology questions. Results Students that received the game-based method performed better in the pos-test assessment only when considering the Anatomy questions section. Students that received the traditional lecture performed better in both post-test and long-term post-test when considering the Anatomy and Physiology questions. Conclusions The game-based learning method is comparable to the traditional learning method in general and in short-term gains, while the traditional lecture still seems to be more effective to improve students’ short and long-term knowledge retention.

A new method for decision making in multi-objective optimization problems

Many engineering sectors are challenged by multi-objective optimization problems. Even if the idea behind these problems is simple and well established, the implementation of any procedure to solve them is not a trivial task. The use of evolutionary algorithms to find candidate solutions is widespread. Usually they supply a discrete picture of the non-dominated solutions, a Pareto set. Although it is very interesting to know the non-dominated solutions, an additional criterion is needed to select one solution to be deployed. To better support the design process, this paper presents a new method of solving non-linear multi-objective optimization problems by adding a control function that will guide the optimization process over the Pareto set that does not need to be found explicitly. The proposed methodology differs from the classical methods that combine the objective functions in a single scale, and is based on a unique run of non-linear single-objective optimizers.

BDNF gene polymorphism, cognition and symptom severity in a Brazilian population-based sample of first-episode psychosis subjects

OBJECTIVE: To investigate the influence of brain-derived neurotrophic factor (BDNF) gene variations on cognitive performance and clinical symptomatology in first-episode psychosis (FEP). METHODS: We performed BDNF val66met variant genotyping, cognitive testing (verbal fluency and digit spans) and assessments of symptom severity (as assessed with the PANSS) in a population-based sample of FEP patients (77 with schizophreniform psychosis and 53 with affective psychoses) and 191 neighboring healthy controls. RESULTS: There was no difference in the proportion of Met allele carriers between FEP patients and controls, and no significant influence of BDNF genotype on cognitive test scores in either of the psychosis groups. A decreased severity of negative symptoms was found in FEP subjects that carried a Met allele, and this finding reached significance for the subgroup with affective psychoses (p < 0.01, ANOVA). CONCLUSIONS: These results suggest that, in FEP, the BDNF gene Val66Met polymorphism does not exert a pervasive influence on cognitive functioning but may modulate the severity of negative symptoms.

Performance of six diagnostic tests to screen for Chagas disease in blood banks and prevalence of Trypanosoma cruzi infection among donors with inconclusive serology screening based on the analysis of epidemiological variables

OBJECTIVE: The frequent occurrence of inconclusive serology in blood banks and the absence of a gold standard test for Chagas'disease led us to examine the efficacy of the blood culture test and five commercial tests (ELISA, IIF, HAI, c-ELISA, rec-ELISA) used in screening blood donors for Chagas disease, as well as to investigate the prevalence of Trypanosoma cruzi infection among donors with inconclusive serology screening in respect to some epidemiological variables. METHODS: To obtain estimates of interest we considered a Bayesian latent class model with inclusion of covariates from the logit link. RESULTS: A better performance was observed with some categories of epidemiological variables. In addition, all pairs of tests (excluding the blood culture test) presented as good alternatives for both screening (sensitivity > 99.96% in parallel testing) and for confirmation (specificity > 99.93% in serial testing) of Chagas disease. The prevalence of 13.30% observed in the stratum of donors with inconclusive serology, means that probably most of these are non-reactive serology. In addition, depending on the level of specific epidemiological variables, the absence of infection can be predicted with a probability of 100% in this group from the pairs of tests using parallel testing. CONCLUSION: The epidemiological variables can lead to improved test results and thus assist in the clarification of inconclusive serology screening results. Moreover, all combinations of pairs using the five commercial tests are good alternatives to confirm results.

Reliability-based design optimization strategies based on FORM: a review

In deterministic optimization, the uncertainties of the structural system (i.e. dimension, model, material, loads, etc) are not explicitly taken into account. Hence, resulting optimal solutions may lead to reduced reliability levels. The objective of reliability based design optimization (RBDO) is to optimize structures guaranteeing that a minimum level of reliability, chosen a priori by the designer, is maintained. Since reliability analysis using the First Order Reliability Method (FORM) is an optimization procedure itself, RBDO (in its classical version) is a double-loop strategy: the reliability analysis (inner loop) and the structural optimization (outer loop). The coupling of these two loops leads to very high computational costs. To reduce the computational burden of RBDO based on FORM, several authors propose decoupling the structural optimization and the reliability analysis. These procedures may be divided in two groups: (i) serial single loop methods and (ii) unilevel methods. The basic idea of serial single loop methods is to decouple the two loops and solve them sequentially, until some convergence criterion is achieved. On the other hand, uni-level methods employ different strategies to obtain a single loop of optimization to solve the RBDO problem. This paper presents a review of such RBDO strategies. A comparison of the performance (computational cost) of the main strategies is presented for several variants of two benchmark problems from the literature and for a structure modeled using the finite element method.

Discretionary-based disclosure: evidence from the Brazilian market

The primary objective of this paper is to identify the factors that explain Brazilian companies level of voluntary disclosure. Underpinning this work is the Discretionary-based Disclosure theory. The sample is composed of the top 100 largest non-financial companies listed in the Bolsa de Valores de São Paulo (Brazilian Securities, Commodities, and Futures exchange - BOVESPA). Information was gathered from Financial Statements for the years ending in 2006, 2007, and 2008, with the use of content analysis. A disclosure framework based on 27 studies from these years was created, with a total of 92 voluntary items divided into two dimensions: economic (43) and socio-environmental (49). Based on the existing literature, a total of 12 hypotheses were elaborated and tested using a panel data approach. Results evidence that: (a) Sector and Origin of Control are statistically significant in all three models tested: economic, socio-environmental, and total; (b) Profitability is relevant in the economic model and in the total model; (c) Tobin s Q is relevant in the socio-environmental model and in the total disclosure model; (d) Leverage and Auditing Firm are only relevant in the economic disclosure model; (e) Size, Governance, Stock Issuing, Growth Opportunities and Concentration of Control are not statistically significant in any of the three models.