Estudo da viabilidade da implantação de frotas de veículos elétricos e híbridos elétricos no atual cenário econômico, político, energético e ambiental brasileiro

Currently there are two car models that use electricity in their propulsion systems, the electric vehicle and the hybrid electric vehicle. The electric vehicles are classified as vehicles that use electric motors in their propulsion system and batteries as a power source, on the other hand, the hybrid vehicles are classified as vehicles that use both electric motors and internal combustion engines in their propulsion system, using both batteries and líquid fuels as a power source. The main goal of this work is to analyze the characteristics of electric and hybrid electric vehicles and demonstrate the unfeasibility of the electric vehicle in the current economic, political, energetic and environmental brazilian scenario, for this purpose it was realized a study about the current brazilian situation regarding to electricity generation, current conservation status of road network, lack of electrical infrastructure for charging batteries, national lithium reserves, environmental characteristics, tax incentives, economic scenario, oil market and political positioning related to the implantation of electric or hybrid electric fleets in nacional territory. The operational characteristics analysis of electric and hybrid electric vehicles in this current scenario leads to the conclusion that currently a growth of electric vehicles fleets on a national scale is totally impractical in the Brazil, Thus, the introduction of green vehicles probably will occur primarily with hybrid electric models, motivated mainly due the bigger autonomy of this models compared to electric models, lower cost of hybrid electric models compared to electric models, factors related to the lack of recharging infrastructure and also factors related to political positioning

Freio eletrodinamométrico usando um inversor de frequência e um motor de indução trifásico

Considering that the Brazilian energy source is based on hydroelectric power plants, every moment that it does not rain enough, we are likely to suffer power outage. Making the rational use of energy not only is wise, but also important for financial issues. The industrial sector is of great importance to Brazilian economic context, because it is one that creates more wealth and jobs. It should be noted that it is one of the sectors that consume more electricity. One of the most used equipment in industry is the three phase induction motor, which ends up providing significant waste of energy. For that reasons, studying three phase induction motors is important. One of the ways to evaluate the parameter of the three phase induction motor is using a dynamometer mechanic or electric. This work aims at further studies (and development) of electrodynamometer brake, a type of electrical dynamometer, that is the only one with reversible use. This means, it is possible to measure both the torque and the power transmitted by the electric motors, by the direct method and the indirect. Besides it allows greater stability in the imposition of charges, due to its nature of being able to regenerate the energy imparted by the engines being tested

Controle visual de automóveis em curvas em situação simulada: efeitos da experiência em contexto real

Dirigir é uma tarefa altamente complexa que requer sincronia entre informações adquiridas e comandos motores, sendo a visão fonte primordial de recursos para o controle do volante por parte do motorista, para que este possa fazer a manobra na quantidade correta e no momento apropriado. Simulações nem sempre preservam os aspectos relevantes do ambiente. O ponto tangente (PT), local mais interno da curva, é onde os motoristas olham em situações de curva ao conduzir um veículo durante contexto natural, e, de acordo com a literatura, este fenômeno também ocorre em situações experimentais com o uso de simuladores específicos de trânsito. Este estudo visa verificar se este comportamento se reproduz em situação simulada de videogame e como a experiência de dirigir naturalmente afeta o desempenho na simulação. Foram recrutados vinte participantes, divididos em dois grupos de dez pessoas cada, com e sem Carteira Nacional de Habilitação e todos com experiência em videogame. A tarefa foi conduzir um veículo em circuito gerado por um jogo de videogame, enquanto seus olhos, e seus respectivos movimentos, foram monitorados e gravados por sistema eye-tracker. Para análise dos dados, foi utilizado o vídeo da imagem gerada pelo videogame com a adição do cursor referente ao olhar do participante. Foram analisadas apenas as situações nas quais os participantes executavam a manobra de cada uma das onze curvas do percurso, utilizando o software ASL Results Plus (versão 1.8.2.18) para estabelecer Áreas de Interesse (AI) de 3º e 10º ao redor do ponto tangente da curva. As variáveis dependentes foram Número Total de Fixações (NF) e Duração Total das Fixações (DF). Os dados foram submetidos à análise de variância de medidas repetidas, tendo fatores grupo (HA ou NH), AI (outros 3º ou 10º) e curvas (onze curvas). Não houve efeito significativo de grupo para ambas as variáveis dependentes. Houve efeito principal de...

Localização de descargas parciais em transformadores de potência por meio de sensores piezelétricos de baixo custo e sistemas inteligentes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Previsão de demanda de veículos automotores através do modelo de regressão linear múltipla

This study aimed to model a equation for the demand of automobiles and light commercial vehicles, based on the data from February 2007 to July 2014, through a multiple regression analysis. The literature review consists of an information collection of the history of automotive industry, and it has contributed to the understanding of the current crisis that affects this market, which consequence was a large reduction in sales. The model developed was evaluated by a residual analysis and also was used an adhesion test - F test - with a significance level of 5%. In addition, a coefficient of determination (R2) of 0.8159 was determined, indicating that 81.59% of the demand for automobiles and light commercial vehicles can be explained by the regression variables: interest rate, unemployment rate, broad consumer price index (CPI), gross domestic product (GDP) and tax on industrialized products (IPI). Finally, other ten samples, from August 2014 to May 2015, were tested in the model in order to validate its forecasting quality. Finally, a Monte Carlo Simulation was run in order to obtain a distribution of probabilities of future demands. It was observed that the actual demand in the period after the sample was in the range that was most likely to occur, and that the GDP and the CPI are the variable that have the greatest influence on the developed model

Análise de viabilidade de implementação de um centro inteligente de motores

Across the industry, regardless of the activity which is intended, the electricity distribution must meet the current and ever growing needs of the market, aiming at reliability and process efficiency. The energy must not only be available to ensure continuity of operation, but also to avoid the costs incurred due to deficiencies and failures. The tendency to migrate to intelligent systems is undeniable and this thesis will be analyzed the advantages that made this kind technology essential, focused on the analysis of the motor control center and as sturdy equipment fit to the concept of intelligent panels. The case study compares in a real scenario the acquisition of a system of low-voltage electrical panels comparing the cost to purchase the same set of panels made with and without the concept of intelligence

Utilização de painéis solares fotovoltaicos no segmento residencial

In order to diversify the global and national energy matrix and reduce harmful impacts on the environment caused by the emission of polluting gases into the atmosphere, the use of clean and renewable energy sources is presented as a good alternative. This work discusses the use of photovoltaic solar energy, a source that presents such characteristics. The photovoltaic system under study is the type distributed connected to the grid, in the residential segment. It is informed of its use in the global and national levels. They are also present their characteristics, electrical and electronic circuits that make up the equipment required for its operation and the design of a system to be installed in a residence

Análise dos ciclos operacionais para especificação de motores de indução trifásicos

This paper addresses the three-phase induction motor by a thermal analysis of its operation, under the gaze of the standards of the Brazilian Association of Technical Standards that deal with working arrangements (operating cycles) defined by appropriate tests and for each use of the motor basis of this study, emphasizing especially the fact of the first three cycles are the cycles with greater possibilities of use for scaling a three-phase induction motor for the main industrial processes, will also be made an analysis of the reasons why the three-phase induction motors have a loss of power at altitudes above 1000 m above sea level and some methods of how to define how a three phase induction motor can be used in one of the first three working arrangements

Estudo da viabilidade de implantação do INOVAR-AUTO utilizando o método do fluxo de caixa sob risco

The automobile industry has a growing importance in the Brazilian economic environment. The industry moves a huge chain that encompasses manufacturers, suppliers of raw materials, auto parts dealers, gas stations, insurance companies, repair shops, tire stores, media companies, advertising agencies, among others. Because of this importance in the current economic environment in Brazil, the federal government, through Law No. 12715 of 17 December 2012 established a Program for the Promotion of Innovation and Densification in the Productive Chain of Motor Vehicles called INOVAR-AUTO in order to support technological development, innovation, safety, environmental protection, energy efficiency and quality of cars, trucks, buses and auto parts. The specific purpose of this study, a simulation for discussion of the viability of the program implementation using the Monte Carlo Simulation combined with the Cash-Flow-at-Risk was performed. To this end, an exploratory and documentary literature on the subject was held as well as a case study in a automobile company of Japanese origin