Estudo experimental do escoamento bifásico líquido gás em golfadas com leve mudança de direção

Gas-liquid two-phase flow is very common in industrial applications, especially in the oil and gas, chemical, and nuclear industries. As operating conditions change such as the flow rates of the phases, the pipe diameter and physical properties of the fluids, different configurations called flow patterns take place. In the case of oil production, the most frequent pattern found is slug flow, in which continuous liquid plugs (liquid slugs) and gas-dominated regions (elongated bubbles) alternate. Offshore scenarios where the pipe lies onto the seabed with slight changes of direction are extremely common. With those scenarios and issues in mind, this work presents an experimental study of two-phase gas-liquid slug flows in a duct with a slight change of direction, represented by a horizontal section followed by a downward sloping pipe stretch. The experiments were carried out at NUEM (Núcleo de Escoamentos Multifásicos UTFPR). The flow initiated and developed under controlled conditions and their characteristic parameters were measured with resistive sensors installed at four pipe sections. Two high-speed cameras were also used. With the measured results, it was evaluated the influence of a slight direction change on the slug flow structures and on the transition between slug flow and stratified flow in the downward section.

Simulação numérica do escoamento monofásico em uma bomba centrífuga radial

Centrifugal pumps are vastly used in many industrial applications. Knowledge of how these components behave in several circumstances is crucial for the development of more efficient and, therefore, less expensive pumping installations. The combination of multiple impellers, vaned diffusers and a volute might introduce several complex flow characteristics that largely deviate from regular inviscid pump flow theory. Computational Fluid Dynamics can be very helpful to extract information about which physical phenomena are involved in such flows. In this sense, this work performs a numerical study of the flow in a two-stage centrifugal pump (Imbil ITAP 65-330/2) with a vaned diffuser and a volute. The flow in the pump is modeled using the software Ansys CFX, by means of a multi-block, transient rotor-stator technique, with structured grids for all pump parts. The simulations were performed using water and a mixture of water and glycerin as work fluids. Several viscosities were considered, in a range between 87 and 720 cP. Comparisons between experimental data obtained by Amaral (2007) and numerical head curves showed a good agreement, with an average deviation of 6.8% for water. The behavior of velocity, pressure and turbulence kinetic energy fields was evaluated for several operational conditions. In general, the results obtained by this work achieved the proposed goals and are a significant contribution to the understanding of the flow studied.

Medidas de concentração de radônio proveniente de argamassas de cimento portland, gesso e fosfogesso

Portland cement being very common construction material has in its composition the natural gypsum. To decrease the costs of manufacturing, the cement industry is substituting the gypsum in its composition by small quantities of phosphogypsum, which is the residue generated by the production of fertilizers and consists essentially of calcium dihydrate and some impurities, such as fluoride, metals in general, and radionuclides. Currently, tons of phosphogypsum are stored in the open air near the fertilizer industries, causing contamination of the environment. The 226 Ra present in these materials, when undergoes radioactive decay, produces the 222Rn gas. This radioactive gas, when inhaled together with its decay products deposited in the lungs, produces the exposure to radiation and can be a potential cause of lung cancer. Thus, the objective of this study was to measure the concentration levels of 222Rn from cylindrical samples of Portland cement, gypsum and phosphogypsum mortar from the state of Paraná, as well as characterizer the material and estimate the radon concentration in an environment of hypothetical dwelling with walls covered by such materials. Experimental setup of 222Rn activity measurements was based on AlphaGUARD detector (Saphymo GmbH). The qualitative and quantitative analysis was performed by gamma spectrometry and EDXRF with Au and Ag targets tubes (AMPTEK), and Mo target (ARTAX) and mechanical testing with x- ray equipment (Gilardoni) and the mechanical press (EMIC). Obtained average values of radon activity from studied materials in the air of containers were of 854 ± 23 Bq/m3, 60,0 ± 7,2 Bq/m3 e 52,9 ± 5,4 Bq/m3 for Portland cement, gypsum and phosphogypsum mortar, respectively. These results extrapolated into the volume of hypothetical dwelling of 36 m3 with the walls covered by such materials were of 3366 ± 91 Bq/m3, 237 ± 28 Bq/m3 e 208 ± 21 Bq/m3for Portland cement, gypsum and phosphogypsum mortar, respectively. Considering the limit of 300 Bq/m3 established by the ICRP, it could be concluded that the use of Portland cement plaster in dwellings is not secure and requires some specific mitigation procedure. Using the results of gamma spectrometry there were calculated the values of radium equivalent activity concentrations (Raeq) for Portland cement, gypsum and phosphogypsum mortar, which were obtained equal to 78,2 ± 0,9 Bq/kg; 58,2 ± 0,9 Bq/kg e 68,2 ± 0,9 Bq/kg, respectively. All values of radium equivalent activity concentrations for studied samples are below the maximum level of 370 Bq/kg. The qualitative and quantitative analysis of EDXRF spectra obtained with studied mortar samples allowed to evaluate quantitate and the elements that constitute the material such as Ca, S, Fe, and others.

Avaliação do potencial de Tillandsia recurvata (L.) L., Bromeliaceae, como bioindicadora da poluição atmosférica urbana

Air pollution can threat the environment and public health, and is assess by pollutant ́s concentration measurements in order to verify whether the limits set by environmental agencies are being respected. However, these measures do not indicate immediately the impacts to living beings. To faced this problem, plants are been investigated as potential bioindicators of air pollution and, among them, stand out bromeliads Tillandsia genus which colonize various substrates,. obtaining water and nutrients from the atmosphere directly. In this context, this research assessed the potential of epiphytic bromeliad Tillandsia recurvata (L.) L. found in urbanized areas of the city of Curitiba - PR as a bioindicator of urban air pollution. According to vehicle traffic, five sample points were selected and classified. Points P1 and P2 were classified as high-traffic vehicle due presenting trucks and urban transport; point P3 was classified as moderate traffic due the predominance of private vehicles and urban transport; and points P4 and P5 were classified as low-traffic, presenting circulation of private vehicles only. There were analyzed the abundance of T. recurvata, morphophysiological parameters (leaf area, leaf specific area, sclerophylly index, percentage dry weight / fresh weight, chlorophyll (a + b), analysis of structural mesophyll organization) and the heavy metals accumulation (Fe, Cd, Cr, Cu, Pb and Zn). The abundance analysis and the results obtained for metals analysis were correlated with the intensity of vehicular traffic, directing the sampling points P1 > P2 = P3 > P4 = P5. This result demonstrate that the abundance of T. recurvata is greater in urban air pollution impacted areas, thus indicating that T. recurvata absorbs and accumulates metals and can be used in biomonitoring of urban air pollution in areas impacted by vehicular traffic. Morphophysiological parameters analyzed shows that the internal plant ́s structure is not significantly impacted by urban air pollution due plant ́s adptations. The presence of absorbing scales, the CAM metabolism pathway and it ́s store water ability, among other features, demonstrate their potential as bio-indicator in urban areas, especially regarding heavy metals accumulation .

Efeitos da adição da cal hidratada na estabilização de um solo sedimentar para pavimentação urbana na região de Curitiba

Urban paving is of paramount importance for a city, both socioeconomic and in quality of life. The urban flooring not different so-called road surface are constituted by a set of horizontal layers, overlaid on the ground, which have the main function of supporting the actions induced by the vehicle redistributing the stresses transmitted to the ground. Soils are important materials for the execution of paving, mainly because they are part of the basic structure of the floor and mostly be available in abundance, with a very low cost, however, their properties usually do not meet the requirements necessary to perform the floor. The soil stabilization for the implementation of urban pavement bases and sub-bases is an increasingly important aspect in the current situation, because always there is the concern with the environment, and there is now the clear awareness that every effort should be made to minimize the effects caused by the exploitation of deposits and deposition of material. In this sense this work presents the effects of adding different proportions of lime to stabilize a sedimentary soil sample from the urban area of the city of Curitiba. It selected a sample quantity of soil in the region to study the stabilization insertion of hydrated lime type (CHIII) powder. The two variables in the study are related to the content of lime mixed with the soil at 0% percentages of 3%, 6%, 8% and 16%, and cure times at which these mixtures were subjected to (0, 7, 14, 28 and 56 days). The tested mixtures were prepared from dosages defined by two methods: one checking the chemical behavior of the samples by means of changes in pH values, and the second analyzing the mechanical behavior through the RCS values. It has been found that the chemical stability analyzed by addition of lime, provided an average increase of RCS in most soil samples studied, because of some physical and chemical characteristics thereof. For mixtures with 6%, 8% and 16% of lime after 28 days of curing, the average RCS was 0,57 MPa, 1,06 MPa and 2,37 MPa, respectively, for the normal proctor, and as for intermediate proctor, in the same curing time and on the same percentages RCS results were 0,54 MPa, 1,04 MPa and 2,71 MPa, respectively. In global terms, the soil-lime mixtures studied showed acceptable behavior by law to use as layers of sub-base. However, only the mixture with 16% of lime, at 28 days, is recommended for use on floors bases. Even so, the mixtures studied constitute a good alternative economic and socio-environmental.

Modelagem eletroquímica e do distúrbio ácido-básico em atletas de karatê participantes do campeonato mundial WKO 2014

The objective of this study was to analyze the electrochemical and acid-base disorders in high performance athletes during the World Karate Championship hosted by the WKO (World Karate Organization) in 2014. In this study 19 male athletes were analyzed (age 34 ± 8), black belts and with over 5 years of experience in the sport. Capillary blood samples from the digital pulp of the finger were collected in three stages: rest, 5 minutes after and 10 minutes after fighting (kumite). The sample was analyzed using blood gas analyzer GEM Premier 3000, using the parameters pH, Na+, K+, Ca2+, lactate e HCO3−. The values related to acid-base disturbance presented statistical differences (p <0.05) in most of the collected moments. The lactate levels found were 2.77 ± 0.97mmol / L in rest, 6.57 ± 2.1 for 5 minutes after and 4.06 ± 1.55 for 10 minutes after combat. The samples collected for the electrolytic markers showed no statistical differences in their values (p <0.05). Through the data collected, we conjecture that the sport can be characterized as a high-intensity exercise and with a predominance of the glycolytic system. The analysis of acid-base disturbance is an efficient method to assist in the control of training loads.

Utilização do mapa espacial de radiação e dose acumulada como ferramenta para otimização de doses em pacientes e trabalhadores nas clínicas de medicina nuclear

This study has as general aim to propose a spatial map of doses as an auxiliary tool in assessing the need for optimization of the workplace in nuclear medicine services. As specific aims, we assessed the workers individual dosimetry; we analyzed the facilities of the nuclear medicine services; and we evaluated environment exposure rates. The research is characterized as a case study, with an exploratory and explanatory nature. It was conducted in three Nuclear Medicine Services, all established in the Northwest of the Paraná State. Results indicated that the evaluated dose rates and workers dosimetry, in all the dependencies of the surveyed services, are within the limits of annual doses. However some exceeded the limits recommended in the standard CNEN-NN 3:01 (2014). It was concluded that the spatial map dose is an important tool for nuclear medicine services because it facilitates the visualization of areas with highest concentration of radiation, and also helps in the constant review of these measures and resources, aiding in the identification of any failures and shortcomings, providing resources to correct any issues and prevent their repetition. The spatial map dose is also important for the regular inspection, evaluating if the radiation protection objectives are being met.

Demonstração de fórmulas matemáticas no ensino médio

The objective of this study is to analyze the validity of working with proofs in the classroom and to present a partial list of proofs of mathematical formulae of the Brazilian secondary/high school curriculum. The adaptation of the proofs into the knowledge and abilities of a secondary school student should also be considered. How the teaching of proofs is treated in official publications in Brazil and other countries is also described. Working with proofs provides a number of benefits to the students, including: the development of logical reasoning, argumentative capacity, analytical skills on a daily basis, as well as motivation and a better understanding of mathematics as a science. The convenience of including the teaching of proofs in Brazilian secondary school curriculum and the need of a balance between the abstraction of proofs and contextualization of the school programmes is discussed. The approach of the proof teaching in the classroom can become a motivating factor or, conversely, a discouraging one. The conclusion is that it would be very useful to create a reference list covering the mathematical expressions of school programmes with their respective proofs that can be understood by secondary school students.

Análise de aspectos sociocientíficos em questões de química do Enem: subsídio para a elaboração de material didático para a formação cidadã

Acompanha: Manual didático: o emprego de aspectos sociocientíficos no ensino de química

Proposta de um processo de transferência de tecnologia para as instituições públicas de pesquisa: o caso da Embrapa

The Brazilian agricultural research agency has, over the years, contributed to solve social problems and to promote new knowledge, incorporating new advances and seeking technological independence of the country, through the transfer of knowledge and technology generated. However, the process of transfering of knowledge and technology has represented a big challenge for public institutions. The Embrapa is the largest and main brazilian agricultural research company, with a staff of 9.790 employees, being 2.440 researchers and an annual budget of R$ 2.52 billion. Operates through 46 decentralized research units, and coordinate of the National Agricultural Research System - SNPA. Considering that technology transfer is the consecration of effort and resources spent for the generation of knowledge and the validity of the research, this work aims to conduct an assessment of the performance of Embrapa Swine and Poultry along the production chain of broilers and propose a technology transfer model for this chain, which can be used by the Public Institutions Research – IPPs. This study is justified by the importance of agricultural research for the country, and the importance of the institution addressed. The methodology used was the case study with a qualitative approach, documentary and bibliographic research and interviews with use of semi-structured questionnaires. The survey was conducted in three stages. In the first stage, there was a diagnosis of the Technology Transfer Process (TT), the contribution of the Embrapa Swine and poultry for the supply chain for broiler. At this stage it was used bibliographical and documentary research and semi- structured interviews with agroindustrial broiler agents, researchers at Embrapa Swine and Poultry, professionals of technology transfer, from the Embrapa and Embrapa Swine and Poultry, managers of technology transfer and researchers from the Agricultural Research Service - ARS. In the second step, a model was developed for the technology transferring poultry process of Embrapa. In this phase, there were made documentary and bibliographic research and analysis of information obtained in the interviews. The third phase was to validate the proposed model in the various sectors of the broilers productive chain. The data show that, although the Embrapa Swine and Poultry develops technologies for broiler production chain, the rate of adoption of these technologies by the chain is very low. It was also diagnosed that there is a gap between the institution and the various links of the chain. It was proposed an observatory mechanism to approximate Embrapa Swine and Poultry and the agents of the broiler chain for identifying and discussing research priorities. The proposed model seeks to improve the interaction between the institution and the chain, in order to identify the chain real research demands and the search and the joint development of solutions for these demands. The proposed TT model was approved by a large majority (96.77%) of the interviewed agents who work in the various links in the chain, as well as by representatives (92%) of the entities linked to this chain. The acceptance of the proposed model demonstrates the willingness of the chain to approach Embrapa Swine and Poultry, and to seek joint solutions to existing problems.

Metodologia participativa para repositórios de recursos educacionais abertos

This research deals with the use of a participatory design methodology to develop a repository of open educational resources, the Arcaz. Discusses key aspects of neutrality and determinism of technology within the context of Social Studies of Science and Technology and presents some concepts of critical theory of technology related to the democratic construction of technological artifacts. Discusses the philosophical heritage of the movements that led to the emergence of free software, open education and open educational resources and argues that participatory design share similar ideals. It presents concepts of human-computer interaction, interaction design and user centered design, important to enhance the user experience in information systems. It addresses the participatory design as a methodology that allows the democratic participation of users in the technological construction, promoting mutual learning and active voice for the participants. Develops a participatory design methodology adapted to the Arcaz context of use and provides the procedures for the meetings conducted to apply participatory design techniques to the repository and the results obtained. It concludes with a study of some of the interventions suggested in the system and orientations for future applications of participatory practices in the development of the repository and a list of best practices, focusing on ethical principles that should guide the participatory design.

A narrativa histórica de Alexandre Wollner sobre o design brasileiro em sua relação com arte, indústria e tecnologia

This work aims to investigate the historical narratives in which the graphic designer Alexandre Wollner assembled about the development of its own profession in Brazil, focusing the ways in which his discourse points relations among design (with greater emphasis in graphic design) and visual arts, the industrial development and notions about technology. Firstly, the theoretical setup searched for dialogues with design historians, with Mikhail Bakhtin, specially his concepts about “ideology” and “discourse’, and the theory of Field Autonomy by Pierre Bourdieu applied in the artistic practice. Following, the relation between Wollner’s own journey and the Brazilian industrial development is shown, and, at last, three of his historical texts are studied, which are written in different moments (1964; 1983; 1998), being those in which the analyzed author wished to point out the origens, events and names that are more remarkable. Throughout the work, it is pointed the importance of Wollner’s contact with the modernist european ideologies that share an abstract and rationalist matrix found at Hochschule für Gestaltung Ulm (HfG Ulm), the german design school from the city of Ulm, in the 1950s. Such modernist discourse understood the practice of design as a method with scientific character, being then different of some other more recurring artistic professional practices in some productive sectors. Wollner aimed to apply such ideals in his professional practice, being the foundation of the paulista office forminform, in 1958, one of his first expressions of such posture, and in his academic practice, helping the foundation of the Escola Superior de Desenho Industrial (ESDI), in Rio de Janeiro, in 1963. Such modernist ideals went along with moments of the Brazilian industrial development during the government of Juscelino Kubitschek (1956–1961) and the “Economical Miracle” from the military government (1968–1973). Wollner argued about the need for the development of national design as a technological and productive differential that would help the growth of national industry, based on Ulm’s project model concept. It is defended that Wollner’s professional and intelectual path, in his efforts of thinking a history of Brazilian design through the choice of pioneers in the area, was founded on an “ideal model” of design, leaving aside the modernist experiences from the 1950s. Such posture would indicate a search for validation of his own profession that was beginning to become more evident in Brazilian productive means, aiming the creation of a differential space in comparison with pre-established practices, usually link to graphic artists from the time.

Proposta de um modelo de gestão de custos para pequenas propriedades rurais familiares com foco na tomada de decisão

This work was general-purpose, develop a proposal of a theoretical model of decisionmaking with a focus on management of small family farms costs, which enables support for decision making. And the following objectives: i) develop a structured methodology, which allows to form a literary basis to provide scientific support for the implementation of research; ii) develop based on the literature the dimensions and variables of the necessary models to propose an application and iii tooling) to implement the proposed model within the dimensions and variables, and validate every stage background and perform the necessary conclusions to verify the effectiveness of applied model. In terms of methodology, we used a structured methodology, which allowed forming a bibliographic portfolio of 29 articles, and through the research constructs developed, based on an existing model, an activity segmentation model for aid farmer of small family farms in the decision-making process with emphasis on cost management. The model was applied in six family farms in the South West region of Parana and Santa Catarina West. With regard to the search results, it was identified that the model can be applied to the specific context for which it was created. It was also possible to identify that the proposed model was valid and relevant to aid in the management of family farms by identifying, through the targeting of productive activities, investment priorities guided by the balance between managing costs and return activities. Moreover, possible to target the activities of six surveyed properties, demonstrating that the property 02, has the shape of more complex segmentation should be divided into three groups of activities, which can be conducted in parallel without any restrictions between activities. Other properties have the segmentation of the simplest activities, allowing viewing in this way that there are activities of groups that require prioritizing investments. Specifically the property 01 and 04 have the highest priority investment target groups, the most prominent activities of groups representing respectively 49.32% and 47.40%, which are represented by grain production activities on the property 01 and grain production, beef cattle and eggs on the property 04.

Arquitetura híbrida com DSP e FPGA para implementação de controladores de filtros ativos de potência

The presence of non-linear loads at a point in the distribution system may deform voltage waveform due to the consumption of non-sinusoidal currents. The use of active power filters allows significant reduction of the harmonic content in the supply current. However, the processing of digital control structures for these filters may require high performance hardware, particularly for reference currents calculation. This work describes the development of hardware structures with high processing capability for application in active power filters. In this sense, it considers an architecture that allows parallel processing using programmable logic devices. The developed structure uses a hybrid model using a DSP and an FPGA. The DSP is used for the acquisition of current and voltage signals, calculation of fundamental current related controllers and PWM generation. The FPGA is used for intensive signal processing, such as the harmonic compensators. In this way, from the experimental analysis, significant reductions of the processing time are achieved when compared to traditional approaches using only DSP. The experimental results validate the designed structure and these results are compared with other ones from architectures reported in the literature.

Orientação profissional direcionada aos alunos do curso técnico de nível médio em agrimensura

This article is the result of the implementation of a program of professional guidance group, based on behavioral analytic principles - psychological theory that addresses human behavior in its interaction with the environment. The program was developed with the objective to assist participants in their career choice at a time of life when such behavior is required in adolescents that are not always repertoire to make such a choice. Participated in the intervention twenty-four adolescents of both sexes, aged 16 and 18, students from middle-level technical course in surveying the Federal Technological University of Paraná - Campus Pato Branco. The results were satisfactory, and at the end of the intervention participants reported greater clarity about career choice that they would from then.