Estudo numérico do efeito de blocagem hidrodinâmica em um túnel de cavitação sobre o escoamento ao redor de um submarino.

O projeto de submarinos é um tema que vem se desenvolvendo há muitos anos. No Brasil, vivemos um momento de pleno avanço na área, sendo encabeçado pela Marinha do Brasil com o desenvolvimento do primeiro submarino de propulsão nuclear brasileiro. No decorrer desse projeto, diversos estudos devem ser desenvolvidos, dentre eles, ensaios com modelos em escala, que serão realizados em um túnel de cavitação. Durante estes experimentos, espera-se que surjam diversas fontes de incerteza, que podem comprometer os resultados obtidos, destacando-se o efeito de blocagem hidrodinâmica. Nesse contexto, esta dissertação apresenta uma investigação do fenômeno de blocagem no modelo de submarino DARPA SUBOFF na seção de testes de um túnel de cavitação. Para isso, simulações tridimensionais de média de Reynolds (RANS) foram realizadas para o modelo de submarino posicionado no túnel (sob blocagem) e sob condição de águas profundas (referência), para diferentes ângulos de ataque e número de Reynolds (Re) constante. Coeficientes de força e momento hidrodinâmicos foram obtidos e os métodos de correção de blocagem clássico e WICS foram empregados para obter fatores que pudessem corrigir esses valores. A eficiência de cada método foi avaliada comparando os valores corrigidos com os de referência. Os resultados mostraram que ambos métodos de correção são eficientes na recuperação de coeficientes de força e momento hidrodinâmicos para razões de blocagem inferiores a 10%, mas ressalvas são feitas quanto à utilização de cada um desses métodos, sendo o método clássico indicado para o estudo de geometrias simples e o método WICS para modelos mais complexos. Paralelamente, a topologia do escoamento ao redor do submarino foi estudada através do método dos pontos críticos, para avaliar se a blocagem hidrodinâmica pode causar alterações nas estruturas presentes no escoamento. A análise topológica permitiu avaliar a evolução nas estruturas do escoamento para os ângulos de ataque e Re simulados. Foram capturadas as linhas de separação no corpo e avaliada sua relação com a tensão de cisalhamento ao longo do casco. A blocagem hidrodinâmica não causou alterações drásticas na topologia do escoamento.

On the development of advanced techniques for mixed-elastohydrodynamic lubrification modelling of journal and sliding bearing systems.

The present thesis is focused on the development of a thorough mathematical modelling and computational solution framework aimed at the numerical simulation of journal and sliding bearing systems operating under a wide range of lubrication regimes (mixed, elastohydrodynamic and full film lubrication regimes) and working conditions (static, quasi-static and transient conditions). The fluid flow effects have been considered in terms of the Isothermal Generalized Equation of the Mechanics of the Viscous Thin Films (Reynolds equation), along with the massconserving p-Ø Elrod-Adams cavitation model that accordingly ensures the so-called JFO complementary boundary conditions for fluid film rupture. The variation of the lubricant rheological properties due to the viscous-pressure (Barus and Roelands equations), viscous-shear-thinning (Eyring and Carreau-Yasuda equations) and density-pressure (Dowson-Higginson equation) relationships have also been taken into account in the overall modelling. Generic models have been derived for the aforementioned bearing components in order to enable their applications in general multibody dynamic systems (MDS), and by including the effects of angular misalignments, superficial geometric defects (form/waviness deviations, EHL deformations, etc.) and axial motion. The bearing exibility (conformal EHL) has been incorporated by means of FEM model reduction (or condensation) techniques. The macroscopic in fluence of the mixedlubrication phenomena have been included into the modelling by the stochastic Patir and Cheng average ow model and the Greenwood-Williamson/Greenwood-Tripp formulations for rough contacts. Furthermore, a deterministic mixed-lubrication model with inter-asperity cavitation has also been proposed for full-scale simulations in the microscopic (roughness) level. According to the extensive mathematical modelling background established, three significant contributions have been accomplished. Firstly, a general numerical solution for the Reynolds lubrication equation with the mass-conserving p - Ø cavitation model has been developed based on the hybridtype Element-Based Finite Volume Method (EbFVM). This new solution scheme allows solving lubrication problems with complex geometries to be discretized by unstructured grids. The numerical method was validated in agreement with several example cases from the literature, and further used in numerical experiments to explore its exibility in coping with irregular meshes for reducing the number of nodes required in the solution of textured sliding bearings. Secondly, novel robust partitioned techniques, namely: Fixed Point Gauss-Seidel Method (PGMF), Point Gauss-Seidel Method with Aitken Acceleration (PGMA) and Interface Quasi-Newton Method with Inverse Jacobian from Least-Squares approximation (IQN-ILS), commonly adopted for solving uid-structure interaction problems have been introduced in the context of tribological simulations, particularly for the coupled calculation of dynamic conformal EHL contacts. The performance of such partitioned methods was evaluated according to simulations of dynamically loaded connecting-rod big-end bearings of both heavy-duty and high-speed engines. Finally, the proposed deterministic mixed-lubrication modelling was applied to investigate the in fluence of the cylinder liner wear after a 100h dynamometer engine test on the hydrodynamic pressure generation and friction of Twin-Land Oil Control Rings.

A gauge theory for continuous spin particles

In this dissertation we explore the features of a Gauge Field Theory formulation for continuous spin particles (CSP). To make our discussion as self-contained as possible, we begin by introducing all the basics of Group Theory - and representation theory - which are necessary to understand where the CSP come from. We then apply what we learn from Group Theory to the study of the Lorentz and Poincaré groups, to the point where we are able to construct the CSP representation. Finally, after a brief review of the Higher-Spin formalism, through the Schwinger-Fronsdal actions, we enter the realm of CSP Field Theory. We study and explore all the local symmetries of the CSP action, as well as all of the nuances associated with the introduction of an enlarged spacetime, which is used to formulate the CSP action. We end our discussion by showing that the physical contents of the CSP action are precisely what we expected them to be, in comparison to our Group Theoretical approach.