Ecological infrastructure vs. techno-fix: A design framework for renewable energy infrastructure in public spaces

Renewable energy is commonly considered a technological addition to urban environments. By contrast, this PhD used a holistic approach to develop a design framework for integrating local electricity production into the ecological function and cultural use of public space. The framework addresses social engagement related to public interaction, and economic engagement related to the estimated quantity of electricity produced, in conjunction with environmental engagement related to the embodied energy required to construct the renewable energy infrastructure. The outcomes will contribute to social and environmental change by engaging society, enriching the local economy and increasing social networks.

Cellulosic ethanol from sugarcane bagasse in Australia : exploring industry feasibility through systems analysis, techno-economic assessment and pilot plant development

Overcoming many of the constraints to early stage investment in biofuels production from sugarcane bagasse in Australia requires an understanding of the complex technical, economic and systemic challenges associated with the transition of established sugar industry structures from single product agri-businesses to new diversified multi-product biorefineries. While positive investment decisions in new infrastructure requires technically feasible solutions and the attainment of project economic investment thresholds, many other systemic factors will influence the investment decision. These factors include the interrelationships between feedstock availability and energy use, competing product alternatives, technology acceptance and perceptions of project uncertainty and risk. This thesis explores the feasibility of a new cellulosic ethanol industry in Australia based on the large sugarcane fibre (bagasse) resource available. The research explores industry feasibility from multiple angles including the challenges of integrating ethanol production into an established sugarcane processing system, scoping the economic drivers and key variables relating to bioethanol projects and considering the impact of emerging technologies in improving industry feasibility. The opportunities available from pilot scale technology demonstration are also addressed. Systems analysis techniques are used to explore the interrelationships between the existing sugarcane industry and the developing cellulosic biofuels industry. This analysis has resulted in the development of a conceptual framework for a bagassebased cellulosic ethanol industry in Australia and uses this framework to assess the uncertainty in key project factors and investment risk. The analysis showed that the fundamental issue affecting investment in a cellulosic ethanol industry from sugarcane in Australia is the uncertainty in the future price of ethanol and government support that reduces the risks associated with early stage investment is likely to be necessary to promote commercialisation of this novel technology. Comprehensive techno-economic models have been developed and used to assess the potential quantum of ethanol production from sugarcane in Australia, to assess the feasibility of a soda-based biorefinery at the Racecourse Sugar Mill in Mackay, Queensland and to assess the feasibility of reducing the cost of production of fermentable sugars from the in-planta expression of cellulases in sugarcane in Australia. These assessments show that ethanol from sugarcane in Australia has the potential to make a significant contribution to reducing Australia’s transportation fuel requirements from fossil fuels and that economically viable projects exist depending upon assumptions relating to product price, ethanol taxation arrangements and greenhouse gas emission reduction incentives. The conceptual design and development of a novel pilot scale cellulosic ethanol research and development facility is also reported in this thesis. The establishment of this facility enables the technical and economic feasibility of new technologies to be assessed in a multi-partner, collaborative environment. As a key outcome of this work, this study has delivered a facility that will enable novel cellulosic ethanol technologies to be assessed in a low investment risk environment, reducing the potential risks associated with early stage investment in commercial projects and hence promoting more rapid technology uptake. While the study has focussed on an exploration of the feasibility of a commercial cellulosic ethanol industry from sugarcane in Australia, many of the same key issues will be of relevance to other sugarcane industries throughout the world seeking diversification of revenue through the implementation of novel cellulosic ethanol technologies.

Fashion, the body and technology : tracing early 20th century techno-utopian ideas, aesthetics and impulses in 21st century wearable technology

‘Wearable technology’, or the use of specialist technology in garments, is promoted by the electronics industry as the next frontier of fashion. However the story of wearable technology’s relationship with fashion begins neither with the development of miniaturised computers in the 1970s nor with sophisticated ‘smart textiles’ of the twenty-first century, despite what much of the rhetoric suggests. This study examines wearable technology against a longer history of fashion, highlighted by the influential techno-sartorial experiments of a group of early twentieth century avant-gardes including Italian Futurists Giacomo Balla and F.T. Marinetti, Russian Constructivists Varvara Stepanova and Liubov Popova, and Paris-based Cubist, Sonia Delaunay. Through the interdisciplinary framework of fashion studies, the thesis provides a fuller picture of wearable technology framed by the idea of utopia. Using comparative analysis, and applying the theoretical formulations of Fredric Jameson, Louis Marin and Michael Carter, the thesis traces the appearance of three techno-utopian themes from their origins in the machine age experiments of Balla, Marinetti, Stepanova, Popova and Delaunay to their twenty-first century reappearance in a dozen wearable technology projects. By exploring the central thesis that contemporary wearable technology resurrects the techno-utopian ideas and expressions of the early twentieth century, the study concludes that the abiding utopian impetus to embed technology in the aesthetics (prints, silhouettes, and fabrication) and functionality of fashion is to unify subject, society and environment under a totalising technological order.

UCPR rule 687 - exercise of discretion to fix costs - applicable principles

Although the Uniform Civil Procedure Rules 1999 (Qld) (UCPR) have always included a power for the court to order a party to pay an amount for costs to be fixed by the court, until recently the power was rarely used in the higher courts. In light of recent practice directions, and the changes to the procedures for assessment of costs contained in the new Chapter 17A of the UCPR, this is no longer the case. The judgment of Mullins J in ASIC v Atlantic 3 Financial (Aust) Pty Ltd [2008] QSC 9 provides some helpful guidance for practitioners about the principles which might be applied.

The only way to fix copyright is to make it fair

Everyone knows there’s a problem with copyright. Artists get paid very little for their work, and legitimate consumers aren’t getting a very fair deal either. Unfortunately, nobody agrees about how we should fix it. Speaking at the Australian Digital Alliance forum last Friday, the Attorney-General and Arts Minister George Brandis said we might have to ask Internet Service Providers (ISPs) to police copyright, in order to deal with “piracy”. In 2012, the High Court in the iiNet case thought it wasn’t a good idea to make ISPs responsible for protecting the rights of third parties...

The quik fix study : a randomised controlled trial of brief interventions for young people with alcohol-related injuries and illnesses accessing emergency department and crisis support care

Background: Alcohol is a major preventable cause of injury, disability and death in young people. Large numbers of young people with alcohol-related injuries and medical conditions present to hospital emergency departments (EDs). Access to brief, efficacious, accessible and cost effective treatment is an international health priority within this age group. While there is growing evidence for the efficacy of brief motivational interviewing (MI) for reducing alcohol use in young people, there is significant scope to increase its impact, and determine if it is the most efficacious and cost effective type of brief intervention available. The efficacy of personality-targeted interventions (PIs) for alcohol misuse delivered individually to young people is yet to be determined or compared to MI, despite growing evidence for school-based PIs. This study protocol describes a randomized controlled trial comparing the efficacy and cost-effectiveness of telephone-delivered MI, PI and an Assessment Feedback/Information (AF/I) only control for reducing alcohol use and related harm in young people. Methods/design: Participants will be 390 young people aged 16 to 25 years presenting to a crisis support service or ED with alcohol-related injuries and illnesses (including severe alcohol intoxication). This single blinded superiority trial randomized young people to (i) 2 sessions of MI; (ii) 2 sessions of a new PI or (iii) a 1 session AF/I only control. Participants are reassessed at 1, 3, 6 and 12 months on the primary outcomes of alcohol use and related problems and secondary outcomes of mental health symptoms, functioning, severity of problematic alcohol use, alcohol injuries, alcohol-related knowledge, coping self-efficacy to resist using alcohol, and cost effectiveness. Discussion: This study will identify the most efficacious and cost-effective telephone-delivered brief intervention for reducing alcohol misuse and related problems in young people presenting to crisis support services or EDs. We expect efficacy will be greatest for PI, followed by MI, and then AF/I at 1, 3, 6 and 12 months on the primary and secondary outcome variables. Telephone-delivered brief interventions could provide a youth-friendly, accessible, efficacious, cost-effective and easily disseminated treatment for addressing the significant public health issue of alcohol misuse and related harm in young people. Trial registration: This trial is registered with the Australian and New Zealand Clinical Trials Registry ACTRN12613000108718.

Techno Teacher Moms: Web 2.0 Connecting Mothers in the Home Education Community

Home education is on the rise in Australia. However, unlike parents who choose mainstream schooling, these parents often lack the support of a wider community to help them on their educational and parenting journey. This support is especially lacking as many people in the wider community find the choice to home education confronting. As such, these parents may feel isolated and alienated in the general population as their choice to home educate is questioned at best, and ridiculed at worst. These parents often find sanctuary online in homeschool groups on Facebook. This chapter explores the ways that Facebook Groups are used by marginalized and disenfranchised families who home educate to meet with others who are likeminded and aligned with their beliefs and philosophies. It is through these groups that parents, in relation to schooling it is especially mothers, are able to ask for advice, to vent, to explore options and find connections that may be lacking in the wider community.

Automated Feedback for 'Fill in the Gap' Programming Exercises

Timely feedback is a vital component in the learning process. It is especially important for beginner students in Information Technology since many have not yet formed an effective internal model of a computer that they can use to construct viable knowledge. Research has shown that learning efficiency is increased if immediate feedback is provided for students. Automatic analysis of student programs has the potential to provide immediate feedback for students and to assist teaching staff in the marking process. This paper describes a “fill in the gap” programming analysis framework which tests students’ solutions and gives feedback on their correctness, detects logic errors and provides hints on how to fix these errors. Currently, the framework is being used with the Environment for Learning to Programming (ELP) system at Queensland University of Technology (QUT); however, the framework can be integrated into any existing online learning environment or programming Integrated Development Environment (IDE)

Cooperation using a robotic ad hoc network made from Bluetooth, JXTA, OSGi and other commercial off the shelf (COTS) products

Abstract - Mobile devices in the near future will need to collaborate to fulfill their function. Collaboration will be done by communication. We use a real world example of robotic soccer to come up with the necessary structures required for robotic communication. A review of related work is done and it is found no examples come close to providing a RANET. The robotic ad hoc network (RANET) we suggest uses existing structures pulled from the areas of wireless networks, peer to peer and software life-cycle management. Gaps are found in the existing structures so we describe how to extend some structures to satisfy the design. The RANET design supports robot cooperation by exchanging messages, discovering needed skills that other robots on the network may possess and the transfer of these skills. The network is built on top of a Bluetooth wireless network and uses JXTA to communicate and transfer skills. OSGi bundles form the skills that can be transferred. To test the nal design a reference implementation is done. Deficiencies in some third party software is found, specifically JXTA and JamVM and GNU Classpath. Lastly we look at how to fix the deciencies by porting the JXTA C implementation to the target robotic platform and potentially eliminating the TCP/IP layer, using UDP instead of TCP or using an adaptive TCP/IP stack. We also propose a future areas of investigation; how to seed the configuration for the Personal area network (PAN) Bluetooth protocol extension so a Bluetooth TCP/IP link is more quickly formed and using the STP to allow multi-hop messaging and transfer of skills.

Respecting local, cultural contexts for assessment practice in an era of globalization

Dissatisfaction, internationally, with existing educational practices and outcomes since the early 1990s has led to increased educational reform. At the same time, there has also been a worldwide shift in control of education away from teachers toward the state for the purposes of restructuring economies. More bureaucratic forms of curriculum and assessment have resulted, with a return to the use of more techno-rational discourse in assessment and evaluation for purposes of efficiency, accountability, impact, and performance management. There has also been an increase in the use of economic and productivity models to study educational outcomes. These models fail to account for the range of outcomes achieved and fail to identify the factors responsible for such diversity in performance.

Why cybersafety tips don’t work for cyberbullying

Research into cyberbullying in Australia has been slow. This is partly because rigorous research takes time, both to conduct, to analyse and to publish. In addition, Australian governments and other decision makers did not realise that cyberbullying was happening until there was greater media attention to the problem in the last few years. This meant that there was no serious research money allocated to cyberbullying research in Australia until about two years ago. In addition, initial research has mainly looked at how many students have been cyberbullied and what were the consequences. As far as I know there is only one large research project which is looking at what programs actually work to prevent and/or intervene in cyberbullying in Australia and that will take time to ascertain. However, our society wants quick fixes and they want a quick fix for cyberbullying.

Modeling study on transport organization methods choice of highway rapid passenger transport in China

Some new types of mathematical model among four key techno - economic indexes of highway rapid passenger through transportation were established based on the principles of transportation economics. According to the research on the feasible solutions to the associated parameters which were then compared to the actual value, found some limitation in the existing transport organization method. In order to conquer that, two new types of transport organization method, namely CD (Collecting and Distributing) Method and Relay Method were brought forward. What’s more, a further research was down to estimate their characteristics, such as feasibilities, operation flows, applicability fields, etc. This analysis proves the two methods can offset the shortage of rapid passenger through transportation. To ensure highway rapid passenger transport develop harmoniously, a three-stage development targets was suggested to fuse different organization methods.