Physical activity in overweight and non-overweight pre-school children

OBJECTIVE To compare the physical activity levels of overweight and non overweight 3- to 5-y-old children while attending preschool. A secondary aim was to evaluate weight-related differences in hypothesized parental determinants of child physical activity behavior. DESIGN: Cross-sectional study. SUBJECTS A total of 245, 3- to 5-y-olds (127 girls, 118 boys) and their parent(s) (242 mothers, 173 fathers) recruited from nine preschools. Overweight status determined using the age- and sex-specific 85th percentile for body mass index (BMI) from CDC Growth Charts. MEASUREMENTS Physical activity during the preschool day was assessed on multiple days via two independent objective measuresFdirect observation using the observation system for recording activity in preschools (OSRAP) and real-time accelerometry using the MTI/CSA 7164 accelerometer. Parents completed a take-home survey assessing sociodemographic information, parental height and weight, modeling of physical activity, support for physical activity, active toys and sporting equipment at home, child’s television watching, frequency of park visitation, and perceptions of child competence. RESULTS Overweight boys were significantly less active than their nonoverweight peers during the preschool day. No significant differences were observed in girls. Despite a strong association between childhood overweight status and parental obesity, no significant differences were observed for the hypothesized parental influences on physical activity behavior. CONCLUSIONS Our results suggest that a significant proportion of overweight children may be at increased risk for further gains in adiposity because of low levels of physical activity during the preschool day.

Association of a disintegrin and metalloprotease 33 (ADAM33) gene polymorphisms with the risk of COPD: An updated meta-analysis of 2,644 cases and 4,804 controls

A series of observational studies have been made to investigate the association of the ADAM33 gene polymorphisms with the risk of COPD, but their results were conflicting. Therefore, we performed an updated meta-analysis to quantitatively summarize the associations of ADAM33 gene polymorphisms with the risk of COPD. Thirteen case–control studies referring to nine SNPs were identified: V4 (rs2787094), T+1 (rs2280089), T2 (rs2280090), T1 (rs2280091), S2 (rs528557), S1 (rs3918396), Q−1 (rs612709), F+1 (rs511898) and ST+5 (rs597980). A dominant model (AA+Aa vs. aa), recessive model (AA vs. Aa+aa), additive model (AA vs. aa) and allelic model (A vs. a) were used to evaluate the association of ADAM33 polymorphism with the risk of COPD. The results indicated that significant associations were found for ADAM33 T1, T2, S1, Q−1, F+1 and ST+5 polymorphisms associated with the risk of COPD in different populations. However, no significant associations were found for V4, T+1 and S2 polymorphisms with the risk of COPD in all genetic models, even in the subgroup analysis by ethnicity. This meta-analysis provided evidence that the ADAM33 T1, T2, S1, Q−1, F+1 and ST+5 six locus polymorphisms association with the risk of COPD. Furthermore, T2, Q−1 and ST+5 indicated an association with the risk of COPD in the European populations, whereas T1, T2, S1, F+1 and Q−1 indicated an association with the risk of COPD in the Asian populations.

Topological SLAM using neighbourhood information of places

Perceptual aliasing makes topological navigation a difficult task. In this paper we present a general approach for topological SLAM~(simultaneous localisation and mapping) which does not require motion or odometry information but only a sequence of noisy measurements from visited places. We propose a particle filtering technique for topological SLAM which relies on a method for disambiguating places which appear indistinguishable using neighbourhood information extracted from the sequence of observations. The algorithm aims to induce a small topological map which is consistent with the observations and simultaneously estimate the location of the robot. The proposed approach is evaluated using a data set of sonar measurements from an indoor environment which contains several similar places. It is demonstrated that our approach is capable of dealing with severe ambiguities and, and that it infers a small map in terms of vertices which is consistent with the sequence of observations.

A multi-hypothesis topological SLAM approach for loop closing on edge-ordered graphs

We present a method for topological SLAM that specifically targets loop closing for edge-ordered graphs. Instead of using a heuristic approach to accept or reject loop closing, we propose a probabilistically grounded multi-hypothesis technique that relies on the incremental construction of a map/state hypothesis tree. Loop closing is introduced automatically within the tree expansion, and likely hypotheses are chosen based on their posterior probability after a sequence of sensor measurements. Careful pruning of the hypothesis tree keeps the growing number of hypotheses under control and a recursive formulation reduces storage and computational costs. Experiments are used to validate the approach.

Designing learning spaces for (partially) online lives : recombinant architecture

The notion of recombinant architecture signals a loosening of spatial connections between physical and digital-online environments (Mitchell, 1996; 2000; 2003). Such an idea also points to the transformative nature of the designing approaches concerned with the creation of spaces where bits meet bodies to fulfil human needs and desires and, at the same time, pursuing those human dimensions of space and place which are so important to our senses of belonging, physical comfort and amenity. This paper proposes that recombinant spaces and places draw on familiar architectural forms and functions and on the transforming functions of digital-online modes. Perspectives, approaches and resources outlined in the paper support designing and re-designing enterprises and aim to stimulate discussion in the Digital Environments strand of this online conference: 'Under Construction: a world without walls'.

Improvements to the fire performance of light gauge steel floor systems

Light gauge steel frame (LSF) structures are increasingly used in commercial and residential buildings because of their non-combustibility, dimensional stability and ease of installation. A common application is in floor-ceiling systems. The LSF floor-ceiling systems must be designed to serve as fire compartment boundaries and provide adequate fire resistance. Fire-rated floor-ceiling assemblies have been increasingly used in buildings. However, limited research has been undertaken in the past and hence a thorough understanding of their fire resistance behaviour is not available. Recently a new composite floor-ceiling system has been developed to provide higher fire rating. But its increased fire rating could not be determined using the currently available design methods. Therefore a research project was conducted to investigate its structural and fire resistance behaviour under standard fire conditions. This paper presents the results of full scale experimental investigations into the structural and fire behaviour of the new LSF floor system protected by the composite ceiling unit. Both the conventional and the new floor systems were tested under structural and fire loads. It demonstrates the improvements provided by the new composite panel system in comparison to conventional floor systems. Numerical studies were also undertaken using the finite element program ABAQUS. Measured temperature profiles of floors were used in the numerical analyses and their results were compared with fire test results. Tests and numerical studies provided a good understanding of the fire behaviour of the LSF floor-ceiling systems and confirmed the superior performance of the new composite system.

Changing user behaviour using a digital repository system

Griffith University is developing a digital repository system using HarvestRoad Hive software to better meet the needs of academics and students using institutional learning and teaching, course readings, and institutional intellectual capital systems. Issues with current operations and systems are discussed in terms of user behaviour. New repository systems are being designed in such a way that they address current service and user behaviour issues by closely aligning systems with user needs. By developing attractive online services, Griffith is working to change current user behaviour to achieve strategic priorities in the sharing and reuse of learning objects, improved selection and use of digitised course readings, the development of ePrint and eScience services, and the management of a research portfolio service.

Reading nineteenth century schoolbooks online : user behavior in a digitized special collection

Special collections, because of the issues associated with conservation and use, a feature they share with archives, tend to be the most digitized areas in libraries. The Nineteenth Century Schoolbooks collection is a collection of 9000 rarely held nineteenth-century schoolbooks that were painstakingly collected over a lifetime of work by Prof. John A. Nietz, and donated to the Hillman Library at the University of Pittsburgh in 1958, which has since grown to 15,000. About 140 of these texts are completely digitized and showcased in a publicly accessible website through the University of Pittsburgh’s Library, along with a searchable bibliography of the entire collection, which expanded the awareness of this collection and its user base to beyond the academic community. The URL for the website is http://digital.library.pitt.edu/nietz/. The collection is a rich resource for researchers studying the intellectual, educational, and textbook publishing history of the United States. In this study, we examined several existing records collected by the Digital Research Library at the University of Pittsburgh in order to determine the identity and searching behaviors of the users of this collection. Some of the records examined include: 1) The results of a 3-month long user survey, 2) User access statistics including search queries for a period of one year, a year after the digitized collection became publicly available in 2001, and 3) E-mail input received by the website over 4 years from 2000-2004. The results of the study demonstrate the differences in online retrieval strategies used by academic researchers and historians, archivists, avocationists, and the general public, and the importance of facilitating the discovery of digitized special collections through the use of electronic finding aids and an interactive interface with detailed metadata.

Understanding users’ information behaviors through information journals

Information behavior studies in the field of Library and Information Science (LIS) generally focus on one of many aspects of information behavior: information finding, information organizing, and information using. Information seeking is further specialized into information searching, information seeking, information foraging or information sense making. Spink and Cole (2006) highlighted the lack of integration across these various approaches and models of information behavior within LIS. Often, each approach provides a different language for similar processes (Spink & Cole, 2004), and it is sometimes hard for practicing information professionals to parse the various theories and models to see how they shape and affect the provision of information resources, services, and products. An integrated model of information behaviors that explains the key dimensions of how peoples’ contextual and situational dimensions affect their information needs and behavior will help information providers and LIS researchers alike with a framework that can help “depict and explain a sequence of behaviors by referring to relevant variables, rather than merely indicating a sequence of events… while indicating something about information needs and sources” (Case, 2002). This presentation presents an integrated model of peoples’ information behaviors based on research that studied participants’ information behaviors through a detailed daily information journal maintained for two weeks.

Health Librarianship Workforce and Education : Research to plan the future. Final Report.

In late 2009, Health Libraries Australia (HLA) received a small grant to undertake a national research project to determine the future requirements for health librarians in the workforce in Australia and develop a structured, modular education framework (post-graduate qualification and continuing professional development structure) to meet these requirements. The main objective was to consider the education and professional development framework that would ensure that health librarians have a clearly defined scope of practice and the specific competency based knowledge and skills that enable them to contribute to the design and delivery of high quality health services in this country. The final report presents a detailed discussion of the changing Australian healthcare environment and the resulting impact on the health library sector, as well as an overview of international trends in health libraries and the implications for Australian health librarianship education. The research methodology is outlined, followed by an analysis of the findings from the two surveys with health librarians and health library managers and the semi-structured interviews conducted with employers. The Medical Library Association (MLA) in the United States had developed a policy document detailing the competencies required by health librarians. It was found that the MLA competencies represented an accepted professional framework of skills which could be used objectively in the survey instrument to measure the areas of professional knowledge and responsibilities that were relevant in the current workplace, and to identify how these requirements might change in the next three to five years. The research results underscore the imperative for health librarians to engage in regular, relevant professional development activities that will enable them to stay abreast with the rapid contextual changes impacting on their practice. In order to be accepted as key members of the multi-disciplinary health professional team, it is strongly believed that health librarians should commit to establishing the mechanisms for specialist certification maintained through compulsory CPD in an ongoing three-year cycle of revalidation. This development would align ALIA and health librarians with other health sector professional associations which are responsible for the self regulation of entry to and continuation in their profession.

Inquiry skills in the Australian curriculum

This paper presents an analysis of inquiry skills in the Australian Curriculum, specifically in science, history and geography. It examines how inquiry is portrayed in the three subjects, and how it is developed and sequenced from Foundation to Year 10. It analyses how information literacy is represented in the inquiry skills strands. It provides recommendations for teacher-librarians to leverage information literacy as an integral part of the inquiry process, and as an integrating framework that unites the strands.

Behaviour of LiteSteel beams subject to combined shear and bending actions

This paper presents the details of a numerical study of a cold-formed steel beam known as LiteSteel Beam (LSB) subject to combined shear and bending actions. The LSB sections are produced by a patented manufacturing process involving simultaneous cold-forming and electric resistance welding. They have a unique shape of a channel beam with two rectangular hollow flanges. To date, however, no investigation has been conducted into the strength of LSB sections under combined shear and bending actions. Hence a numerical study was undertaken to investigate the behaviour and strength of LSBs subject to combined shear and bending actions. In this research, finite element models of LSBs were developed to simulate the combined shear and bending behaviour and strength of LSBs. They were then validated by comparing their results with test results and used in a parametric study. Both experimental and finite element analysis results showed that the current design equations are not suitable for combined shear and bending capacities of LSBs. Hence improved design equations are proposed for the capacities of LSBs subject to combined shear and bending actions.