Quantification of the relationship between Fuser Roller Temperature and Laser Printer Emissions

Recently published studies not only demonstrated that laser printers are often significant sources of ultrafine particles, but they also shed light on particle formation mechanisms. While the role of fuser roller temperature as a factor affecting particle formation rate has been postulated, its impact has never been quantified. To address this gap in knowledge, this study measured emissions from 30 laser printers in chamber using a standardized printing sequence, as well as monitoring fuser roller temperature. Based on a simplified mass balance equation, the average emission rates of particle number, PM2.5 and O3 were calculated. The results showed that: almost all printers were found to be high particle number emitters (i.e. > 1.01×1010 particles/min); colour printing generated more PM2.5 than monochrome printing; and all printers generated significant amounts of O3. Particle number emissions varied significantly during printing and followed the cycle of fuser roller temperature variation, which points to temperature being the strongest factor controlling emissions. For two sub-groups of printers using the same technology (heating lamps), systematic positive correlations, in the form of a power law, were found between average particle number emission rate and average roller temperature. Other factors, such as fuser material and structure, are also thought to play a role, since no such correlation was found for the remaining two sub-groups of printers using heating lamps, or for the printers using heating strips. In addition, O3 and total PM2.5 were not found to be statistically correlated with fuser temperature.

Engineering the surface of a sugarcane roller mill roll for grip and durability

Roller mills are typically used to crush sugarcane to express the juice from which sugar is manufactured. The mill rolls need to provide sufficient grip to ensure minimal sliding of the sugarcane along the roll surface. The rolls are subject to pressures up to 55 MPa from the sugarcane bagasse (as the sugarcane is called after first being crushed between a pair of rolls). The insoluble component of sugarcane includes typically 10% ash that largely originates from soil that is harvested with the cane. The sugarcane juice is acidic with pH typically between 5.0 and 5.5. As a result of ash and juice, the mill rolls are subjected to a range of abrasive and corrosive wear mechanisms. Solutions to provide grip and resist wear involve the selection of an appropriate roll shell material and compatible hard facing to provide the desired grip and wear characteristics. This paper reviews the various solutions that have been adopted for grip and durability for mill rolls and highlights the advantages and disadvantages of each method.

The Art of Freestyle

"This book is intended to be instructional, inspirational and of interest to both novice and expert alike. The assumption is made that to even begin to playboat the paddler will already be an intermdiate white water boater familiar with basic strokes and boating skills. For the interested non paddler a glossary of terms is included. Part One gives an overview of the sport and lays the foundations of understanding on which the rest of the book builds, as well as exploring safety issues and exploring key concepts. Part Two describes and coaches the moves which are divided into intermediate and advanced standard. Part Three looks at how to train in order to hone your physical and mental skills and be 'the best you can be'. Never before has so much freestyle, rodeo and playboating information from so many great boaters been gathered together in one place. In a world dominated by the biggest, the fastest, the loudest...the most big headed, this book makes a stand. Whilst of course covering all the latest moves, the authors have not been frightened to start right back at basic concepts. Technical ability is nothing without knowledge, without planning and without stamina. This book tells you the secrets. Freestyle is a thinking person's sport. The authors, the contributors and the book's publisher have an unrivalled breadth of knowledge in this field, so let this book do some of the thinking for you. The full colour format and the emphasis on personal training and coaching make for a particularly easy read. When planning my preparation or training before a competition, I always try to evaluate its potential benefits in terms of how many places it will have helped me move up in the final results. As a general rule in life, any time spent off the water should be viewed with suspicion! However, use this time constructively and absorb the information in this book and you will reap your own rewards. The Art of Freestyle is a book genuinely written by paddlers for paddlers. It is often a hard task to get top athletes to part with their preferred training or competition techniques, but this book is full of such 'Top Tips'. This is not a book written just by its authors, but by a wealth of accomplished paddlers. It is this subtle combination that keeps the reader in the real world...believing in a move, not just imagining it. This is the real world...believe you can do it."--Playak Website

The combination of empirical mode decomposition and minimum entropy deconvolution for roller bearing diagnostics in non-stationary operation

Diagnostics is based on the characterization of mechanical system condition and allows early detection of a possible fault. Signal processing is an approach widely used in diagnostics, since it allows directly characterizing the state of the system. Several types of advanced signal processing techniques have been proposed in the last decades and added to more conventional ones. Seldom, these techniques are able to consider non-stationary operations. Diagnostics of roller bearings is not an exception of this framework. In this paper, a new vibration signal processing tool, able to perform roller bearing diagnostics in whatever working condition and noise level, is developed on the basis of two data-adaptive techniques as Empirical Mode Decomposition (EMD), Minimum Entropy Deconvolution (MED), coupled by means of the mathematics related to the Hilbert transform. The effectiveness of the new signal processing tool is proven by means of experimental data measured in a test-rig that employs high power industrial size components.

Effectiveness of MED for Fault Diagnosis in Roller Bearings

Diagnostics of rolling element bearings is usually performed by means of vibration signals measured by accelerometers placed in the proximity of the bearing under investigation. The aim is to monitor the integrity of the bearing components, in order to avoid catastrophic failures, or to implement condition based maintenance strategies. In particular, the trend in this field is to combine in a single algorithm different signal-enhancement and signal-analysis techniques. Among the first ones, Minimum Entropy Deconvolution (MED) has been pointed out as a key tool able to highlight the effect of a possible damage in one of the bearing components within the vibration signal. This paper presents the application of this technique to signals collected on a simple test-rig, able to test damaged industrial roller bearings in different working conditions. The effectiveness of the technique has been tested, comparing the results of one undamaged bearing with three bearings artificially damaged in different locations, namely on the inner race, outer race and rollers. Since MED performances are dependent on the filter length, the most suitable value of this parameter is defined on the basis of both the application and measured signals. This represents an original contribution of the paper.

Roller Derby Dolls

In the sprawling outer suburbs of Brisbane, a revolution is brewing. A sassy group of women from all walks of life has a dream: to resurrect the lost sport of full-contact roller derby in Australia. Led by their president Evil Doll, and despite none having experience in business, the roller girls have set up a roller derby league, one of 220 now dotted around the globe. Roller Derby Dolls is a story of female empowerment and of women with a dream—the dream of inspiring women in Australia to strap on the skates and give the sport a go.

The impact of fuser roller temperature on laser printer particle emission

The emission of particles in the ultrafine range (<100 nm) from laser printers has not been reported until recently (Uhde et al., 2006; He et al., 2007; Morawska et al., 2009). The research reported to date has provided a body of information about printer emissions and shed light on particle formation mechanisms. However, until now, the effect of fuser roller temperature on particle emissions had not been comprehensively investigated...

Determining heavy vehicle suspension health from vibratory wheel loads

A low-cost test bed was made from a modified heavy vehicle (HV) brake tester. By rotating a test HV’s wheel on an eccentric roller, a known vibration was imparted to the wheel under test. A control case for dampers in good condition was compared with two test cases of ineffective shock absorbers. Measurement of the forces at the bearings of the roller provided an indication of the HV wheel-forces. Where the level of serviceability of the shock absorbers varied, differences in wheel load provided a quality indicator corresponding to a change of damper characteristic. Conclusions regarding the levels of damper maintenance beyond which HV suspensions cause road damage and dynamic wheel forces at the threshold of tyre wear at which HV shock absorbers are normally replaced are presented.

H-house

The author's approach to the problems associated with building in bushfire prone landscapes comes from 12 years of study of the biophysical and cultural landscapes in the Great Southern Region of Western Australia - research which resulted in the design and construction of the H-house at Bremer Bay. The house was developed using a 'ground up' approach whereby Dr Weir conducted topographical surveys and worked with a local botanist and a bushfire risk consultant to ascertain the level of threat that fire presented to this particular site. The intention from the outset however, was not to design a bushfire resistant house per se, but to develop a design which would place the owners in close proximity to the highly biodiverse heath vegetation of their site. The research aim was to find ways - through architectural design-to link the patterns of usage of the house with other site specific conditions related to the prevailing winds, solar orientation and seasonal change. The H-house has a number of features which increase the level of bushfire safety. These include: Fire rated roller shutters (tested by the CSIRO for ember attack and radiant heat), Fire resistant double glazing (on windows not protected by the shutters), Fibre-cement sheet cladding of the underside of the elevated timber floor structure, Manually operated high pressure sprinkler system on exposed timber decks, A fire refuge (an enlarged laundry, shower area) within the house with a dedicated cabinet for fire fighting equipment) and A low pressure solar powered domestic water supply system.

Contemporary take on deconstructed Medea : a review

THEATRE: The New Dead: Medea Material. By Heiner Muller. Stella Electrika in association with La Boite Theatre Company, Brisbane, November 19. THERE has been a lot of intensity in independent theatre in Brisbane during the past year, as companies, production houses and producers have begun building new programs and platforms to support an expansion of pathways within the local theatre ecology. Audiences have been exposed to works signalling the diversity of what Brisbane theatre makers want to see on stage, from productions of new local and international pieces to new devised works, and the results of residencies and development programs. La Boite Theatre Company closes its inaugural indie season with a work that places it at the contemporary, experimental end of the spectrum. The New Dead: Medea Material is emerging director Kat Henry's interpretation of Heiner Muller's 1981 text Despoiled Shore Medea Material Landscape with Argonauts. Start of sidebar. Skip to end of sidebar. End of sidebar. Return to start of sidebar. Muller is known for his radical adaptations of historical dramas, from the Greeks to Shakespeare, and for deconstructed texts in which the characters - in this case, Medea - violently reject the familial, cultural and political roles society has laid out for them. Muller's combination of deconstructed characters, disconnected poetic language and constant references to aspects of popular culture and the Cold War politics he sought to abjure make his texts challenging to realise. The poetry entices but the density, together with the increasing distance of the Cold War politics in the texts, leaves contemporary directors with clear decisions to make about how to adapt these open texts. In The New Dead: Medea Material, Henry works with some interesting imagery and conceptual territory. Lucinda Shaw as Medea, Guy Webster as Jason and Kimie Tsukakoshi as King Creon's daughter Glauce, the woman for whom Jason forsakes his wife Medea, each reference different aspects of contemporary culture. Medea is a bitter, drunken, satin-gowned diva with bite; Jason - first seen lounging in front of the television with a beer in an image reminiscent of Sarah Kane's in-yer-face characterisation of Hippolytus in Phaedra's Love - has something of the rock star about him; and Glauce is a roller-skating, karaoke-singing, pole-dancing young temptress. The production is given a contemporary tone, dominated by Medea's twisted love and loss, rather than by any commentary on her circumstances. Its strength is the aesthetic Henry creates, supported by live electro-pop music, a band stage that stands as a metaphor for Jason's sea voyage, and multimedia that inserts images of the story unfolding beyond these characters' speeches as sorts of subconscious flashes. While Tsukakoshi is engaging throughout, there are moments when Shaw and Webster's performances - particularly in the songs - are diminished by a lack of clarity. The result is a piece that, while slightly lacking in its realisation at times, undoubtedly flags Henry's facility as an emerging director and what she wants to bring to the Brisbane theatre scene.

That's a rap : the making of an Australian hip hop integrated musical film

To date, the majority of films that utilise or feature hip hop music and culture, have either been in the realms of documentary, or in ‘show musicals’ (where the film musical’s device of characters’ bursting into song, is justified by the narrative of a pursuit of a career in the entertainment industry). Thus, most films that feature hip hop expression have in some way been tied to the subject of hip hop. A research interest and enthusiasm was developed for utilising hip hop expression in film in a new way, which would extend the narrative possibilities of hip hop film to wider topics and themes. The creation of the thesis film Out of My Cloud, and the writing of this accompanying exegesis, investigates a research concern of the potential for the use of hip hop expression in an ‘integrated musical’ film (where characters’ break into song without conceit or explanation). Context and rationale for Out of My Cloud (an Australian hip hop ‘integrated musical’ film) is provided in this writing. It is argued that hip hop is particularly suitable for use in a modern narrative film, and particularly in an ‘integrated musical’ film, due to its: current vibrancy and popularity, rap (vocal element of hip hop) music’s focus on lyrical message and meaning, and rap’s use as an everyday, non-performative method of communication. It is also argued that Australian hip hop deserves greater representation in film and literature due to: its current popularity, and its nature as a unique and distinct form of hip hop. To date, representation of Australian hip hop in film and television has almost solely been restricted to the documentary form. Out of My Cloud borrows from elements of social realist cinema such as: contrasts with mainstream cinema, an exploration/recognition of the relationship between environment and development of character, use of non-actors, location-shooting, a political intent of the filmmaker, displaying sympathy for an underclass, representation of underrepresented character types and topics, and a loose narrative structure that does not offer solid resolution. A case is made that it may be appropriate to marry elements of social realist film with hip hop expression due to common characteristics, such as: representation of marginalised or underrepresented groups and issues in society, political objectives of the artist/s, and sympathy for an underclass. In developing and producing Out of My Cloud, a specific method of working with, and filming actor improvisation was developed. This method was informed by improvisation and associated camera techniques of filmmakers such as Charlie Chaplin, Mike Leigh, Khoa Do, Dogme 95 filmmakers, and Lars von Trier (post-Dogme 95). A review of techniques used by these filmmakers is provided in this writing, as well as the impact it has made on my approach. The method utilised in Out of My Cloud was most influenced by Khoa Do’s technique of guiding actors to improvise fairly loosely, but with a predetermined endpoint in mind. A variation of this technique was developed for use in Out of My Cloud, which involved filming with two cameras to allow edits from multiple angles. Specific processes for creating Out of My Cloud are described and explained in this writing. Particular attention is given to the approaches regarding the story elements and the music elements. Various significant aspects of the process are referred to including the filming and recording of live musical performances, the recording of ‘freestyle’ performances (lyrics composed and performed spontaneously) and the creation of a scored musical scene involving a vocal performance without regular timing or rhythm. The documentation of processes in this writing serve to make the successful elements of this film transferable and replicable to other practitioners in the field, whilst flagging missteps to allow fellow practitioners to avoid similar missteps in future projects. While Out of My Cloud is not without its shortcomings as a short film work (for example in the areas of story and camerawork) it provides a significant contribution to the field as a working example of how hip hop may be utilised in an ‘integrated musical’ film, as well as being a rare example of a narrative film that features Australian hip hop. This film and the accompanying exegesis provide insights that contribute to an understanding of techniques, theories and knowledge in the field of filmmaking practice.

Exploring the relationship between grandparents and their grandchild who has a disability

This thesis reports on the findings of a study which sought to explore the relationship between grandparents and their grandchild who has a disability. In contrast to previous studies, it presents the grandparents’ perspective on the roles and relationships they maintain within their families and adopts a qualitative approach to identify the meanings, symbols and beliefs grandparents attribute to their experiences. Grandparents have played and continue to play an important role in the lives of many families, contributing both symbolic and instrumental support to their grandchildren. Changing life expectancy for older people has meant that many more grandparents and grandchildren now have the opportunity to participate in meaningful interactions and to develop strong relationships. In the future, this will be true for great grandparents and in some cases great great grandparents as well. This presents a number of challenges to all concerned as family members negotiate the often complex arena of family life in the 21st Century. Realizing that a grandchild has a disability adds another degree of complexity to the negotiation of roles and responsibilities of grandparents within families. By focussing on grandparents experiences when their grandchild has a disability, this research both explores a knowledge gap in the current literature and more practicably, will inform both grandparents and their families as they negotiate these challenges. This research makes a significant contribution to knowledge in this area by exploring grandparents’ views on the differences in the relationship they have with their typically developing grandchildren and their grandchild with a disability; the impact having a grandchild with a disability had had on their grandparent identity and whether it impacted on quality of life. As well as reporting on the aims of the study, the papers presented in this thesis report on the key topics and themes identified in the analysis of the transcribed interviews conducted with 22 grandparents whose grandchild has a disability. Article 1 presents an overview of the literature which informs current knowledge in relation to grandparents, presenting a historical and theoretical perspective. Additionally, it presents previous literature which discusses the roles and styles grandparents adopt thus providing a framework which is later used to examine the roles and styles adopted by the grandparents in the study. Article 2 addresses the emotional responses grandparents in the study experienced as they grandparented a child with a disability. Comparing these emotions to that of a roller coaster ride, ranging from absolute sadness and grief to pride and delight, these findings highlight their unique experiences and will be reassuring for other grandparents who experience similar emotional responses. Article 3 discusses from the grandparents’ perspective, how having a grandchild with a disability has impacted on their family. Whilst reporting on the day to day challenges of competing family commitments and conflict, a number of grandparents in this study also commented that the experience had made them closer as a family and that there had been significant changes in how some individual family members now viewed people with disability. Article 4 explores the impact having a grandchild with a disability may have on the grandparents’ sense of identity and enactment of the grandparent role, utilising Neugarten and Weinstein’s (1964) classic grandparenting styles and Kornhaber’s (1996) concepts of latent and functional grandparent identity as a basis for comparison. It provides important insight into grandparenting identity when a child has a disability, suggesting that the grandparenting experience and role enactment may be universal with only the context and delivery varying. In summary, this thesis confirms the valuable role grandparents play in the lives of grandchildren who have a disability and their families. It identifies a number of implications and makes recommendations for future research and practice.

Formation mechanisms of secondary organic aerosols in relation to laser printer emissions

Due to their large surface area, complex chemical composition and high alveolar deposition rate, ultrafine particles (UFPs) (< 0.1 ìm) pose a significant risk to human health and their toxicological effects have been acknowledged by the World Health Organisation. Since people spend most of their time indoors, there is a growing concern about the UFPs present in some indoor environments. Recent studies have shown that office machines, in particular laser printers, are a significant indoor source of UFPs. The majority of printer-generated UFPs are organic carbon and it is unlikely that these particles are emitted directly from the printer or its supplies (such as paper and toner powder). Thus, it was hypothesised that these UFPs are secondary organic aerosols (SOA). Considering the widespread use of printers and human exposure to these particles, understanding the processes involved in particle formation is of critical importance. However, few studies have investigated the nature (e.g. volatility, hygroscopicity, composition, size distribution and mixing state) and formation mechanisms of these particles. In order to address this gap in scientific knowledge, a comprehensive study including state-of-art instrumental methods was conducted to characterise the real-time emissions from modern commercial laser printers, including particles, volatile organic compounds (VOCs) and ozone (O3). The morphology, elemental composition, volatility and hygroscopicity of generated particles were also examined. The large set of experimental results was analysed and interpreted to provide insight into: (1) Emissions profiles of laser printers: The results showed that UFPs dominated the number concentrations of generated particles, with a quasi unimodal size distribution observed for all tests. These particles were volatile, non-hygroscopic and mixed both externally and internally. Particle microanalysis indicated that semi-volatile organic compounds occupied the dominant fraction of these particles, with only trace quantities of particles containing Ca and Fe. Furthermore, almost all laser printers tested in this study emitted measurable concentrations of VOCs and O3. A positive correlation between submicron particles and O3 concentrations, as well as a contrasting negative correlation between submicron particles and total VOC concentrations were observed during printing for all tests. These results proved that UFPs generated from laser printers are mainly SOAs. (2) Sources and precursors of generated particles: In order to identify the possible particle sources, particle formation potentials of both the printer components (e.g. fuser roller and lubricant oil) and supplies (e.g. paper and toner powder) were investigated using furnace tests. The VOCs emitted during the experiments were sampled and identified to provide information about particle precursors. The results suggested that all of the tested materials had the potential to generate particles upon heating. Nine unsaturated VOCs were identified from the emissions produced by paper and toner, which may contribute to the formation of UFPs through oxidation reactions with ozone. (3) Factors influencing the particle emission: The factors influencing particle emissions were also investigated by comparing two popular laser printers, one showing particle emissions three orders of magnitude higher than the other. The effects of toner coverage, printing history, type of paper and toner, and working temperature of the fuser roller on particle number emissions were examined. The results showed that the temperature of the fuser roller was a key factor driving the emission of particles. Based on the results for 30 different types of laser printers, a systematic positive correlation was observed between temperature and particle number emissions for printers that used the same heating technology and had a similar structure and fuser material. It was also found that temperature fluctuations were associated with intense bursts of particles and therefore, they may have impact on the particle emissions. Furthermore, the results indicated that the type of paper and toner powder contributed to particle emissions, while no apparent relationship was observed between toner coverage and levels of submicron particles. (4) Mechanisms of SOA formation, growth and ageing: The overall hypothesis that UFPs are formed by reactions with the VOCs and O3 emitted from laser printers was examined. The results proved this hypothesis and suggested that O3 may also play a role in particle ageing. In addition, knowledge about the mixing state of generated particles was utilised to explore the detailed processes of particle formation for different printing scenarios, including warm-up, normal printing, and printing without toner. The results indicated that polymerisation may have occurred on the surface of the generated particles to produce thermoplastic polymers, which may account for the expandable characteristics of some particles. Furthermore, toner and other particle residues on the idling belt from previous print jobs were a very clear contributing factor in the formation of laser printer-emitted particles. In summary, this study not only improves scientific understanding of the nature of printer-generated particles, but also provides significant insight into the formation and ageing mechanisms of SOAs in the indoor environment. The outcomes will also be beneficial to governments, industry and individuals.

How to Get a Research Degree

How to Get a Research Degree offers insight, instruction, and inspiration, and it does so without minimizing the rigors of postgraduate study. It honours and normalises the many trials of the research process, and in this provides a great service to students. The text includes: getting started; choosing a supervisor; managing your relationship with your supervisor; keeping your life balanced; managing your time effectively, the research thesis roller coaster; thesis design and construction; intellectual property;presenting papers and seminars; assessment and examination of the thesis; and, careering into the future.

Modelling the flow of cane constituents through the milling process of a raw sugar factory

This thesis reports on an investigation to develop an advanced and comprehensive milling process model of the raw sugar factory. Although the new model can be applied to both, the four-roller and six-roller milling units, it is primarily developed for the six-roller mills which are widely used in the Australian sugar industry. The approach taken was to gain an understanding of the previous milling process simulation model "MILSIM" developed at the University of Queensland nearly four decades ago. Although the MILSIM model was widely adopted in the Australian sugar industry for simulating the milling process it did have some incorrect assumptions. The study aimed to eliminate all the incorrect assumptions of the previous model and develop an advanced model that represents the milling process correctly and tracks the flow of other cane components in the milling process which have not been considered in the previous models. The development of the milling process model was done is three stages. Firstly, an enhanced milling unit extraction model (MILEX) was developed to access the mill performance parameters and predict the extraction performance of the milling process. New definitions for the milling performance parameters were developed and a complete milling train along with the juice screen was modelled. The MILEX model was validated with factory data and the variation in the mill performance parameters was observed and studied. Some case studies were undertaken to study the effect of fibre in juice streams, juice in cush return and imbibition% fibre on extraction performance of the milling process. It was concluded from the study that the empirical relations developed for the mill performance parameters in the MILSIM model were not applicable to the new model. New empirical relations have to be developed before the model is applied with confidence. Secondly, a soluble and insoluble solids model was developed using modelling theory and experimental data to track the flow of sucrose (pol), reducing sugars (glucose and fructose), soluble ash, true fibre and mud solids entering the milling train through the cane supply and their distribution in juice and bagasse streams.. The soluble impurities and mud solids in cane affect the performance of the milling train and further processing of juice and bagasse. New mill performance parameters were developed in the model to track the flow of cane components. The developed model is the first of its kind and provides some additional insight regarding the flow of soluble and insoluble cane components and the factors affecting their distribution in juice and bagasse. The model proved to be a good extension to the MILEX model to study the overall performance of the milling train. Thirdly, the developed models were incorporated in a proprietary software package "SysCAD’ for advanced operational efficiency and for availability in the ‘whole of factory’ model. The MILEX model was developed in SysCAD software to represent a single milling unit. Eventually the entire milling train and the juice screen were developed in SysCAD using series of different controllers and features of the software. The models developed in SysCAD can be run from macro enabled excel file and reports can be generated in excel sheets. The flexibility of the software, ease of use and other advantages are described broadly in the relevant chapter. The MILEX model is developed in static mode and dynamic mode. The application of the dynamic mode of the model is still under progress.