Engineering across cultures : new learning resources for intercultural competency in engineering

BACKGROUND The work described in this paper has emerged from an ALTC/OLT funded project, Exploring Intercultural Competency in Engineering. The project indentified many facets of culture and intercultural competence that go beyond a culture-as-nationality paradigm. It was clear from this work that resources were needed to help engineering educators introduce students to the complex issues of culture as they relate to engineering practice. A set of learning modules focussing on intercultural competence in engineering practice were developed early on in the project. Through the OLT project, these modules have been expanded into a range of resources covering various aspects of culture in engineering. Supporting the resources, an eBook detailing the ins and outs of intercultural competency has also been developed to assist engineering educators to embed opportunities for students to develop skills in unpacking and managing cross-cultural challenges in engineering practice. PURPOSE This paper describes the key principles behind the development of the learning modules, the areas they cover and the eBook developed to support the modules. The paper is intended as an introduction to the approaches and resources and extends an invitation to the community to draw from, and contribute to this initial work. DESIGN/METHOD A key aim of this project was to go beyond the culture-as-nationality approach adopted in much of the work around intercultural competency (Deardorff, 2011). The eBook explores different dimensions of culture such as workplace culture, culture’s influence on engineering design, and culture in the classroom. The authors describe how these connect to industry practice and explore what they mean for engineering education. The packaged learning modules described here have been developed as a matrix of approaches moving from familiar known methods through complicated activities relying to some extent on expert knowledge. Some modules draw on the concept of ‘complex un-order’ as described in the ‘Cynefin domains’ proposed by Kurtz and Snowden (2003). RESULTS Several of the modules included in the eBook have already been trialled at a variety of institutions. Feedback from staff has been reassuringly positive so far. Further trials are planned for second semester 2012, and version 1 of the eBook and learning modules, Engineering Across Cultures, is due to be released in late October 2012. CONCLUSIONS The Engineering Across Cultures eBook and learning modules provide a useful and ready to employ resource to help educators tackle the complex issue of intercultural competency in engineering education. The book is by no means exhaustive, and nor are the modules, they instead provide an accessible, engineering specific guide to bringing cultural issues into the engineering classroom.

'Create a better online you': Designing online learning resources to develop undergraduate social media skills

‘Create a Better Online You’ (CBOY) is an emerging initiative from QUT Library. CBOY focusses on developing the social media skills of undergraduates at QUT. While many students will have encountered ‘cybersafety’ training in primary or secondary school, a comprehensive environmental scan revealed little in the way of social media resources targeted at undergraduates. In particular, there was little to no focus on the ways in which social media could be used strategically to develop a positive online reputation and enhance chances of employability post tertiary education. The resources created as part of CBOY are the result of a literature review, environmental scan, and discussions with staff and students at QUT. Following the comprehensive environmental scan, it appears that CBOY represents one of the first free, openly accessible, interactive resources targeting the social media skills of undergraduates.

'Create a Better Online You': Designing online learning resources to develop undergraduate social media skills

This article charts the development of the 'Create a Better Online You' (CBOY) project. The focus of CBOY was the social media skills of undergraduate students at QUT. While many students will have encountered 'cybersafety' training in primary or secondary school, however, a comprehensive environmental scan revealed little in the way of social media resources targeted at undergraduate students. In particular, there was little to no focus on the ways in which social media could be used strategically to develop a positive online reputation and enhance chances of employability post tertiary education. The resources created as part of CBOY were the result of a comprehensive literature review, environmental scan, interviews with key internal and external stakeholders, and in discussion with undergraduate students at Queensland University of Technology (QUT). Following the comprehensive environmental scan, it appears that CBOY represents one of the first free, openly accessible, interactive resources targeting the social media skills of undergraduates.

Effectiveness of on-line resources to enhance student learning and engagement

BACKGROUND For engineering graduates to be work-ready with marketable skills they must not only be well-versed with engineering science and its applications, but also able to adapt to using commercial software that is widely used in engineering practice. Hydrological/hydraulic modelling is one aspect of engineering practice which demands the ability to apply fundamentals into design and construction using software. The user manuals for such software are usually tailored for the experienced engineer but not for undergraduates who typically are novices to concepts of modelling and software tools. As the focus of a course such as Advanced Water Engineering is on the wider aspects of engineering application of hydrological and hydraulic concepts, it is ineffective for the lecturers to direct the students to user manuals as students have neither the time nor the desire to sift through numerous pages in a manual. An alternative and efficient way to demonstrate the use of the software is enabling students to develop a model to simulate real-world scenario using the tools of the software and directing them to make informed decisions based on outcomes. PURPOSE Past experience of the lecturer showed that the resources available for the students left a knowledge gap leading to numerous student queries outside contact hours. The purpose of this study is to assess how effective purpose-built video resources can be in supplementing the traditional learning resources to enhance student learning. APPROACH Short-length animated video clips comprising guided step-by-step instructions were prepared using screen capture software to capture screen activity and later edited to focus on specific features using pop-up annotations; Vocal narration was purposely excluded to avoid disturbances due to noise and allow different learning paces of individual students. The video clips were made available to the students alongside the traditional resources/approaches such as in-class demonstrations, guideline notes, and tips for efficient and error-free procedural descriptions. The number of queries the lecturer received from the student cohort outside the lecture times was recorded. An anonymous survey to assess the usefulness and adequacy of the courseware was conducted. OUTCOMES While a significant decline in the number of student queries was noted, an overwhelming majority of the survey respondents confirmed the usefulness of the purpose-developed courseware. CONCLUSIONS/RECOMMENDATIONS/SUMMARY The survey and lecturer’s experience indicated that animated demonstration video clips illustrating the various steps involved in developing hydrologic and hydraulic models and simulating design scenarios is an effective supplement for traditional learning resources. Among the many advantages of the custom-made video clips as a learning resource are that they (1) highlight the aspects that are important to undergraduate learning but not available in the software manuals as the latter are designed for more mature users/learners; (2) provide short, to-the point communication in a step-by-step manner; (3) allow students flexibility to self-learn at their own pace; (4) enhance student learning; and (5) enable time savings for the lecturer in the long term by avoiding queries of a repetitive nature. It is expected that these newly developed resources will be improved to incorporate students’ suggestions before being offered to future cohorts of students. The concept can also be expanded to other relevant courses where animated demonstrations of key modelling steps are beneficial to student learning.

Advancing e-learning policy and practice : influences on academics’ adoption, integration and development of multimodal e-learning courses

Tertiary education is increasingly a contested space where advances in Information Communications Technologies and their application to technology-mediated e-learning environments have forced university administrators and educators to dislocate themselves from traditional correspondence modes of student engagement. Compounding this paradigmatic shift within the traditional sphere of distance education pedagogy are multiple and conflicting pressures on academics to develop flexible, engaging, cost-effective and sustainable interactive learning resources that incorporate both multimedia and hypermedia. This chapter reports on a study that examined factors that influence educators’ decision to adopt and integrate educational technology and convert traditional print-based distance education materials into interactive multimodal e-learning formats. Although the broader study was conducted in a single Australian university and investigated pedagogical, institutional and individual factors, this chapter restricts its focus to solely the pedagogical motivations and concerns of educators. It is argued that findings from the study have significance at the institutional level, particularly in terms of developing an underlying pedagogical rationale that can permeate the e-learning culture throughout the university, while at the same time, providing a roadmap for educators who are yet to fully engage with the e-learning format.

Bringing academics on board : encouraging institution-wide diffusion of e-learning environments

Rapid advances in educational and information communications technology (ICT)have encouraged some educators to move beyond traditional face to face and distance education correspondence modes toward a rich, technology mediated e-learning environment. Ready access to multimedia at the desktop has provided the opportunity for educators to develop flexible, engaging and interactive learning resources incorporating multimedia and hypermedia. However, despite this opportunity, the adoption and integration of educational technologies by academics across the tertiary sector has typically been slow. This paper presents the findings of a qualitative study that investigated factors influencing the manner in which academics adopt and integrate educational technology and ICT. The research was conducted at a regional Australian university, the University of Southern Queensland (USQ), and focused on the development of e-learning environments. These e-learning environments include a range of multimodal learning objects and multiple representations of content that seek to cater for different learning styles and modal preferences, increase interaction, improve learning outcomes, provide a more inclusive and equitable curriculum and more closely mirror the on campus learning experience. This focus of this paper is primarily on the barriers or inhibitors academics reported in the study, including institutional barriers, individual inhibitors and pedagogical concerns. Strategies for addressing these obstacles are presented and implications and recommendations for educational institutions are discussed.

Supporting Students for Flexible Learning

The changing roles for academics relates to a new emphasis on: •developing life-long learners, in addition to teaching 'content'; •ensuring long-term graduate outcomes not just short-term subject objectives are achieved by all students; and •collaborative course and subject design.

Creating efficiencies in teaching : where are the right resources when you need them?

Early career engineering academics are encouraged to join and contribute to established research groups at the leading edge of their discipline. This is often facilitated by various staff development and support programs. Given that academics are often appointed primarily on the basis of their research skills and outputs, such an approach is justified and is likely to result in advancing the individual academic’s career. It also enhances their capacity to attract competitive research funding, while contributing to the overall research performance of their institution, with further potential for an increased share of government funding. In contrast, there is much less clarity of direction or availability of support mechanisms for those academics in their role as teachers. Following a general induction to teaching and learning at their institution, they would commonly think about preparing some lecture materials, whether for delivery in a face-to-face or on-line modality. Typically they would look for new references and textbooks to act as a guide for preparing the content. They would probably find out how the course has been taught before, and what laboratory facilities and experiments have been used. In all of these and other related tasks, the majority of newly appointed academics are guided strongly by their own experiences as students, rather than any firm knowledge of pedagogical principles. At a time of increased demands on academics’ time, and high expectations of performance and productivity in both research and teaching, it is essential to examine possible actions to support academics in enhancing their teaching performance in effective and efficient ways. Many resources have been produced over the years in engineering schools around the world, with very high intellectual and monetary costs. In Australia, the last few years have seen a surge in the number of ALTC/OLT projects and fellowships addressing a range of engineering education issues and providing many resources. There are concerns however regarding the extent to which these resources are being effectively utilised. Why are academics still re-inventing the wheel and creating their own version of teaching resources and pedagogical practice? Why do they spend so much of their precious time in such an inefficient way? A symposium examining the above issues was conducted at the AAEE2012 conference, and some pointers to possible responses to the above questions were obtained. These are explored in this paper and supplemented by the responses to a survey of a group of engineering education leaders on some of the aspects of these research questions. The outcomes of the workshop and survey results have been analysed in view of the literature and the ALTC/OLT sponsored learning and teaching projects and resources. Other factors are discussed, including how such resources can be found, how their quality might be evaluated, and how assessment may be appropriately incorporated, again using readily available resources. This study found a strong resonance between resources reuse with work on technology acceptance (Davis, 1989), suggesting that technology adoption models could be used to encourage resource sharing. Efficient use of outstanding learning materials is an enabling approach. The paper provides some insights on the factors affecting the re-use of available resources, and makes some recommendations and suggestions on how the issue of resources re-use might be incorporated in the process of applying and completing engineering education projects.

Enhancing student learning in the workplace through developing the leadership capabilities of clinical supervisors in the nursing discipline

The purpose of this project was to build the leadership capacity of clinical supervisors in the nursing discipline by developing, implementing and systematically embedding a leadership model into the structure and practice of student supervision. The University worked in partnership with three major metropolitan hospitals in Queensland to develop a framework and professional development program incorporating leadership and clinical supervision. The Leadership and Clinical Education (LaCE) program consisted of two structured workshops complemented by individual personal development projects undertaken by participants. Participants were supported in these activities with a purpose-built website that provides access to a wide variety of information and other learning resources. Quantitative and qualitative evaluations indicated that the approach was highly valued by participants, as it promoted useful peer dialogue, sharing of experiences and personal development in relation to assisting leadership development and student learning in the workplace. The LaCE program provides an ideal springboard for introducing the development of welltrained leaders into the clinical workplace. The resources developed have the potential to provide ongoing support for clinical supervisors to improve the learning of undergraduate nursing student. The challenge will be to achieve continued innovation within clinical education through sustainable leadership programs.

E-learning intervention for STEM education: Developing country case study

This paper reports an innovative and systemic approach to implementing ICT intervention to support enhancement of teaching and learning of STEM subjects in developing countries. The need for adopting ICT was 2 fold: a lack of availability of qualified STEM secondary teachers and a lack of quality teaching and learning resources to assist teachers and students. ICT was seen as being able to impact on both issues. The intervention involved developing sustainable network design including equipment choices, providing high quality e-learning resources and human resource development including teacher training. The intervention has gradually been accepted by teachers, students, and parents and institutionalized as a key feature of the secondary STEM education in the case study country.

Finding order in chaos : a problem based collaborative assignment for 1300 students across 19 disciplines

The use of collaborative assignments for assessment is a risky undertaking for students and course designers. Yet the benefits, in terms of core learning outcomes, competencies, collaborative sense making and student involvement, suggest that the effort is worthwhile. Formal descriptions and rules do little to ameliorate the perception of risk and increased anxiety by students. (Ryan, 2007). BEB100 Introducing Professional Learning is a faculty-wide foundation unit with over 1300 students from 19 disciplines across the Faculty of the Built Environment and Engineering (“BEE”) at the Queensland University of Technology (“QUT”), Brisbane, Australia. Finding order in chaos outlines the approach and justification, assessment criteria, learning resources, teamwork tools, tutorial management, communication strategies, 2007-09 Student Learning Experience Survey results, annual improvements, findings and outcomes.

Nature's experiment? Handedness and early childhood development

In recent years a large body of research has investigated the various factors affecting child development and the consequent impact of child development on future educational and labour market outcomes. In this article we contribute to this literature by investigating the effect of handedness on a child and given recent research demonstrating that child development strongly affects adult outcomes. Using a large nationally representative sample of young children we find that the probability of a child being left-handed is not significantly related to child health at birth, family composition, parental employment or household income. We also find robust evidence that left-handed (and mixed handed) children perform significantly worse in nearly all measures of development than right-handed children with the relative disadvantage being larger for boys than girls. Importantly these differentials cannot be explained by different socioeconomic characteristics of the household, parental attitudes or investments in learning resources.

Transforming Queensland VET : Challenges and Opportunities (Volume 3)

The volume is the third in a series that addresses change and development in the delivery of VET programs in Queensland. The chapters address a breadth of issues that relate to the changing landscape for teaching and learning in VET programs through e-learning. Organisational change is a key focus of this volume. James Waterson examines business and pedagogical perspectives for SkillsTech Australia to create teaching and learning environments that will enrich the learning experience for staff and students. Kerry Emerson explores the ways in which printing teachers might change current practices in order to deliver their training to apprentices and trainees – off-the-job, onthe- job and online, through e-learning. The chapter by Erik Dodwell takes up issues of user-friendly RPL interviews and the challenges to develop a model that may be applied consistently across all industry areas using conversational interviews. The chapters by Linda Roberston, Nina Woodrow, and Anushka Weerackody discuss teaching and learning for specific groups of students. Linda Roberston proposes a vision for learning support teachers in which the learner is encouraged to be a self-directed and autonomous learner who is capable of utilising e-learning resources and is information literate. Nina Woodrow presents a case for the diminished sense of occupational identity by adult literacy teachers and the implications of this loss of expertise across the VET sector. Constructive strategies for change are outlined. The chapter by Anushka Weerackody explores ideas to enhance the practices of ESL teachers in TAFE Queensland through an online community of practice. The issues of on-the-job training through e-learning for various trades is considered by Anne-Louise Johnston and the benefits and challenges for SkillsTech Australia in developing training partnerships with industry to deliver these changes. These papers were completed by the authors as a part of their postgraduate studies at QUT. The views reported are those of the authors and should not be attributed to the Queensland Department of Education and Training. Donna Berthelsen and Lauren Vogel Faculty of Education Queensland University of Technology December 2009

Enhancing the transition of commencing students into university : an institution-wide approach

The importance of the first year experience (FYE) to success at university is well documented and supported with the transition into university regarded as crucial. While there is also support for the notion that a successful FYE should have a whole-of-institution focus and models have been proposed, many institutions still face challenges in achieving institution-wide FYE program implementation. This paper discusses the origins, theoretical and empirical bases and structure of an institution-wide approach to the FYE. It uses a case study of the Transitions In Project (TIP) at the Queensland University of Technology to illustrate how institution-wide FYE program implementation can be achieved and sustained. TIP had four inter-related projects focussing on at-risk students, first year curriculum, learning resources and staff development. The key aim of TIP was to identify good practice and institutionalise it in a sustainable way. The degree of success in achieving this is evaluated.

Integrated literacies : every online player wins a prize

QUT Library’s model of learning support brings together academic literacy (study skills) and information literacy (research skills). The blended portfolio enables holistic planning and development, seamless services, connected learning resources and more authentic curriculum-embedded education. The model reinforces the Library’s strategic focus on learning service innovation and active engagement in teaching and learning. ----- ----- ----- The online learning strategy is a critical component of the broader literacies framework. This strategy unifies new and existing online resources (e.g.: Pilot, QUT cite|write and IFN001|AIRS Online) to augment learner capability. Across the suite, prudent application of emerging technologies with visual communications and learning design delivers a wide range of adaptive study tools. Separately and together, these resources meet the learning needs and styles of a diverse cohort providing positive and individual learning opportunities. Deliberate articulation with strategic directions regarding First Year Experience, assessment, retention and curriculum alignment assures that the Library’s initiatives move in step with institutional objectives relating to enhancing the student experience and flexible blended learning. ----- ----- ----- The release of Studywell in 2010 emphasises the continuing commitment to blended literacy education. Targeting undergraduate learners (particularly 1st year/transition), this online environment provides 24/7 access to practical study and research tools. Studywell’s design and application of technology creates a “discovery infrastructure” [1] which facilitates greater self-directed learning and interaction with content. ----- ----- ----- This paper presents QUT Library’s online learning strategy within the context of the parent “integrated literacies” framework. Highlighting the key online learning resources, the paper describes the inter-relationships between those resources to develop complementary literacies. The paper details broad aspects of the overarching learning and study support framework as well as the online strategy, including strategic positioning, quality and evaluation processes, maintenance, development, implementation, and client engagement and satisfaction with the learning resources.