Design of LSF wall studs under fire conditions

Cold-formed steel lipped channels are commonly used in LSF wall construction as load bearing studs with plasterboards on both sides. Under fire conditions, cold-formed thin-walled steel sections heat up quickly resulting in fast reduction in their strength and stiffness. Usually the LSF wall panels are subjected to fire from one side which will cause thermal bowing, neutral axis shift and magnification effects due to the development of non-uniform temperature distributions across the stud. This will induce an additional bending moment in the stud and hence the studs in LSF wall panels should be designed as a beam column considering both the applied axial compression load and the additional bending moment. Traditionally the fire resistance rating of these wall panels is based on approximate prescriptive methods. Very often they are limited to standard wall configurations used by the industry. Therefore a detailed research study is needed to develop fire design rules to predict the failure load and hence the failure time of LSF wall panels subject to non-uniform temperature distributions. This paper presents the details of an investigation to develop suitable fire design rules for LSF wall studs under non-uniform elevated temperature distributions. Applications of the previously developed fire design rules based on AISI design manual and Eurocode 3 Parts 1.2 and 1.3 to LSF wall studs were investigated in detail and new simplified fire design rules based on AS/NZS 4600 and Eurocode 3 Part 1.3 were proposed in the current study with suitable allowances for the interaction effects of compression and bending actions. The accuracy of the proposed fire design rules was verified by using the results from full scale fire tests and extensive numerical studies.

Fire performance and design of cold-formed steel wall systems

Traditionally, the fire resistance rating of Light gauge steel frame (LSF) wall systems is based on approximate prescriptive methods developed using limited fire tests. These fire tests are conducted using standard fire time-temperature curve given in ISO 834. However, in recent times fire has become a major disaster in buildings due to the increase in fire loads as a result of modern furniture and lightweight construction, which make use of thermoplastics materials, synthetic foams and fabrics. Therefore a detailed research study into the performance of load bearing LSF wall systems under both standard and realistic design fires on one side was undertaken to develop improved fire design rules. This study included both full scale fire tests and numerical studies of eight different LSF wall systems conducted for both the standard fire curve and the recently developed realistic design fire curves. The use of previous fire design rules developed for LSF walls subjected to non-uniform elevated temperature distributions based on AISI design manual and Eurocode 3 Parts 1.2 and 1.3 was investigated first. New simplified fire design rules based on AS/NZS 4600, North American Specification and Eurocode 3 Part 1.3 were then proposed with suitable allowances for the interaction effects of compression and bending actions. The importance of considering thermal bowing, magnified thermal bowing and neutral axis shift in the fire design was also investigated and their effects were included. A spread sheet based design tool was developed based on the new design rules to predict the failure load ratio versus time and temperature curves for varying LSF wall configurations. The accuracy of the proposed design rules was verified using the fire test and finite element analysis results for various wall configurations, steel grades, thicknesses and load ratios under both standard and realistic design fire conditions. A simplified method was also proposed to predict the fire resistance rating of LSF walls based on two sets of equations developed for the load ratio-hot flange temperature and the time-temperature relationships. This paper presents the details of this study on LSF wall systems under fire conditions and the results.

Local buckling studies of cold-formed steel compression members at elevated temperatures

Cold-formed steel members have been widely used in residential and commercial buildings as primary load bearing structural elements. They are often made of thin steel sheets and hence they are more susceptible to local buckling. The buckling behaviour of cold-formed steel compression members under fire conditions is not fully investigated yet and hence there is a lack of knowledge on the fire performance of cold-formed steel compression members. Current cold-formed steel design standards do not provide adequate design guidelines for the fire design of cold-formed steel compression members. Therefore a research project based on extensive experimental and numerical studies was undertaken to investigate the local buckling behaviour of light gauge cold-formed steel compression members under simulated fire conditions. First a series of 91 local buckling tests was conducted at ambient and uniform elevated temperatures up to 700oC on cold-formed lipped and unlipped channels. Suitable finite element models were then developed to simulate the behaviour of tested columns and were validated using test results. All the ultimate load capacity results for local buckling were compared with the predictions from the available design rules based on AS/NZS 4600, BS 5950 Part 5, Eurocode 3 Parts 1.2 and 1.3 and the direct strength method (DSM), based on which suitable recommendations have been made for the fire design of cold-formed steel compression members subject to local buckling at uniform elevated temperatures.

A review of rationale for allocating costs and payments in producing and supplying public sector information PART A of 2 Parts – Chapters 1, 2 and 3) 13 March 2011 version

This work reviews the rationale and processes for raising revenue and allocating funds to perform information intensive activities that are pertinent to the work of democratic government. ‘Government of the people, by the people, for the people’ expresses an idea that democratic government has no higher authority than the people who agree to be bound by its rules. Democracy depends on continually learning how to develop understandings and agreements that can sustain voting majorities on which democratic law making and collective action depends. The objective expressed in constitutional terms is to deliver ‘peace, order and good government’. Meeting this objective requires a collective intellectual authority that can understand what is possible; and a collective moral authority to understand what ought to happen in practice. Facts of life determine that a society needs to retain its collective competence despite a continual turnover of its membership as people die but life goes on. Retaining this ‘collective competence’ in matters of self-government depends on each new generation: • acquiring a collective knowledge of how to produce goods and services needed to sustain a society and its capacity for self-government; • Learning how to defend society diplomatically and militarily in relation to external forces to prevent overthrow of its self-governing capacity; and • Learning how to defend society against divisive internal forces to preserve the authority of representative legislatures, allow peaceful dispute resolution and maintain social cohesion.

New Voices, New Visions

New Voices, New Visions brings together a collection of papers that engage with the ideas of nation, identity and place. The title New Voices, New Visions harks back to earlier scholarship that endeavoured to explore these issues. It therefore makes links between old and new stories of Australian identity, tracing the continuities, shifts and changes in how Australia is imagined. The collection is deliberately interdisciplinary, gathering work by historians, literary and film scholars, communication and cultural theorists, political scientists and sociologists. This mixed perspectives enables the reader to trace ideas, concepts and theories across a range of disciplines and understand the distinctive ways in which different disciplines engage with ideas of nation, space and Australian identity. The book is written in an engaging and accessible manner, making it an excellent text for undergraduate and postgraduate students in the fields of Australian Studies. It will be especially useful for the growing number of students living outside Australia who engage with Australian literature and culture. The book provides a range of topics that introduces students to key issues and concepts. It also situates these ideas in historical context. New Voices, New Visions engages with key contemporary issues in everyday Australian life: environment and climate change, immigration, consumerism, travel and cities. It explores these various topics by considering case studies, both contemporary and historical. For example the issue of attitudes to Asia are analysed through art; the topic of national symbols through the case of the crocodile; approaches to immigration via a popular reality television programme.

Generalized-positioning for mixed-frequency of mixed-GNSS and its preliminary applications

Modernized GPS and GLONASS, together with new GNSS systems, BeiDou and Galileo, offer code and phase ranging signals in three or more carriers. Traditionally, dual-frequency code and/or phase GPS measurements are linearly combined to eliminate effects of ionosphere delays in various positioning and analysis. This typical treatment method has imitations in processing signals at three or more frequencies from more than one system and can be hardly adapted itself to cope with the booming of various receivers with a broad variety of singles. In this contribution, a generalized-positioning model that the navigation system independent and the carrier number unrelated is promoted, which is suitable for both single- and multi-sites data processing. For the synchronization of different signals, uncalibrated signal delays (USD) are more generally defined to compensate the signal specific offsets in code and phase signals respectively. In addition, the ionospheric delays are included in the parameterization with an elaborate consideration. Based on the analysis of the algebraic structures, this generalized-positioning model is further refined with a set of proper constrains to regularize the datum deficiency of the observation equation system. With this new model, uncalibrated signal delays (USD) and ionospheric delays are derived for both GPS and BeiDou with a large dada set. Numerical results demonstrate that, with a limited number of stations, the uncalibrated code delays (UCD) are determinate to a precision of about 0.1 ns for GPS and 0.4 ns for BeiDou signals, while the uncalibrated phase delays (UPD) for L1 and L2 are generated with 37 stations evenly distributed in China for GPS with a consistency of about 0.3 cycle. Extra experiments concerning the performance of this novel model in point positioning with mixed-frequencies of mixed-constellations is analyzed, in which the USD parameters are fixed with our generated values. The results are evaluated in terms of both positioning accuracy and convergence time.

The empire of cancer: Gene patents and cancer voices

In his book, The Emperor of All Maladies, Siddhartha Mukherjee writes a history of cancer — "It is a chronicle of an ancient disease — once a clandestine, 'whispered-about' illness — that has metamorphosed into a lethal shape-shifting entity imbued with such penetrating metaphorical, medical, scientific, and political potency that cancer is often described as the defining plague of our generation." Increasingly, an important theme in the history of cancer is the role of law, particularly in the field of intellectual property law. It is striking that a number of contemporary policy debates over intellectual property and public health have concerned cancer research, diagnosis, and treatment. In the area of access to essential medicines, there has been much debate over Novartis’ patent application in respect of Glivec, a treatment for leukaemia. India’s Supreme Court held that the Swiss company’s patent application violated a safeguard provision in India’s patent law designed to stop evergreening. In the field of tobacco control, the Australian Government introduced plain packaging for tobacco products in order to address the health burdens associated with the tobacco epidemic. This regime was successfully defended in the High Court of Australia. In the area of intellectual property and biotechnology, there have been significant disputes over the Utah biotechnology company Myriad Genetics and its patents in respect of genetic testing for BRCA1 and BRCA2, which are related to breast cancer and ovarian cancer. The Federal Court of Australia handed down a decision on the validity of Myriad Genetics’ patent in respect of genetic testing for BRCA1 in February 2013. The Supreme Court of the United States heard a challenge to the validity of Myriad Genetics’ patents in this area in April 2013, and handed down a judgment in July 2013. Such disputes have involved tensions between intellectual property rights, and public health. This article focuses upon one of these important test cases involving intellectual property, public health, and cancer research. In June 2010, Cancer Voices Australia and Yvonne D’Arcy brought an action in the Federal Court of Australia against the validity of a BRCA1 patent — held by Myriad Genetics Inc, the Centre de Recherche du Chul, the Cancer Institute of Japan and Genetic Technologies Limited. Yvonne D’Arcy — a Brisbane woman who has had treatment for breast cancer — maintained: "I believe that what they are doing is morally and ethically corrupt and that big companies should not control any parts of the human body." She observed: "For my daughter, I've had her have [sic] mammograms, etc, because of me but I would still like her to be able to have the test to see if the mutation gene is in there from me." The applicants made the following arguments: "Genes and the information represented by human gene sequences are products of nature universally present in each individual, and the information content of a human gene sequence is fixed. Genetic variations or mutations are products of nature. The isolation of the BRCA1 gene mutation from the human body constitutes no more than a medical or scientific discovery of a naturally occurring phenomenon and does not give rise to a patentable invention." The applicants also argued that "the alleged invention is not a patentable invention in that, so far as claimed in claims 1–3, it is not a manner of manufacture within the meaning of s 6 of the Statute of Monopolies". The applicants suggested that "the alleged invention is a mere discovery". Moreover, the applicants contended that "the alleged invention of each of claims 1-3 is not a patentable invention because they are claims for biological processes for the generation of human beings". The applicants, though, later dropped the argument that the patent claims related to biological processes for the generation of human beings. In February 2013, Nicholas J of the Federal Court of Australia considered the case brought by Cancer Voices Australia and Yvonne D’Arcy against Myriad Genetics. The judge presented the issues in the case, as follows: "The issue that arises in this case is of considerable importance. It relates to the patentability of genes, or gene sequences, and the practice of 'gene patenting'. Briefly stated, the issue to be decided is whether under the Patents Act 1990 (Cth) a valid patent may be granted for a claim that covers naturally occurring nucleic acid — either deoxyribonucleic acid (DNA) or ribonucleic acid (RNA) — that has been 'isolated'". In this context, the word "isolated" implies that naturally occurring nucleic acid found in the cells of the human body, whether it be DNA or RNA, has been removed from the cellular environment in which it naturally exists and separated from other cellular components also found there. The genes found in the human body are made of nucleic acid. The particular gene with which the patent in suit is concerned (BRCA1) is a human breast and ovarian cancer disposing gene. Various mutations that may be present in this gene have been linked to various forms of cancer including breast cancer and ovarian cancer.' The judge held in this particular case that Myriad Genetics’ patent claims were a "manner of manufacture" under s 6 of the Statute of Monopolies and s 18(1)(a) of the Patents Act 1990 (Cth). The matter is currently under appeal in the Full Court of the Federal Court of Australia. This article interprets the dispute over Myriad Genetics in light of the scholarly work of Nobel Laureate Professor Joseph Stiglitz on inequality. Such work has significant explanatory power in the context of intellectual property and biotechnology. First, Stiglitz has contended that "societal inequality was a result not just of the laws of economics, but also of how we shape the economy — through politics, including through almost every aspect of our legal system". Stiglitz is concerned that "our intellectual property regime … contributes needlessly to the gravest form of inequality." He maintains: "The right to life should not be contingent on the ability to pay." Second, Stiglitz worries that "some of the most iniquitous aspects of inequality creation within our economic system are a result of 'rent-seeking': profits, and inequality, generated by manipulating social or political conditions to get a larger share of the economic pie, rather than increasing the size of that pie". He observes that "the most iniquitous aspect of this wealth appropriation arises when the wealth that goes to the top comes at the expense of the bottom." Third, Stiglitz comments: "When the legal regime governing intellectual property rights is designed poorly, it facilitates rent-seeking" and "the result is that there is actually less innovation and more inequality." He is concerned that intellectual property regimes "create monopoly rents that impede access to health both create inequality and hamper growth more generally." Finally, Stiglitz has recommended: "Government-financed research, foundations, and the prize system … are alternatives, with major advantages, and without the inequality-increasing disadvantages of the current intellectual property rights system.’" This article provides a critical analysis of the Australian litigation and debate surrounding Myriad Genetics’ patents in respect of genetic testing for BRCA1. First, it considers the ruling of Nicholas J in the Federal Court of Australia that Myriad Genetics’ patent was a manner of manufacture as it related to an artificially created state of affairs, and not mere products of nature. Second, it examines the policy debate over gene patents in Australia, and its relevance to the litigation involving Myriad Genetics. Third, it examines comparative law, and contrasts the ruling by Nicholas J in the Federal Court of Australia with developments in the United States, Canada, and the European Union. Fourth, this piece considers the reaction to the decision of Nicholas at first instance in Australia. Fifth, the article assesses the prospects of an appeal to the Full Federal Court of Australia over the Myriad Genetics’ patents. Finally, this article observes that, whatever happens in respect of litigation against Myriad Genetics, there remains controversy over Genetic Technologies Limited. The Melbourne firm has been aggressively licensing and enforcing its related patents on non-coding DNA and genomic mapping.

New dimeric supramolecular structure of mixed (phthalocyaninato)(porphyrinato)-europium(III) sandwiches : preparation and spectroscopic characteristics

The mixed double-decker Eu\[Pc(15C5)4](TPP) (1) was obtained by base-catalysed tetramerisation of 4,5-dicyanobenzo-15-crown-5 using the half-sandwich complex Eu(TPP)(acac) (acac = acetylacetonate), generated in situ, as the template. For comparative studies, the mixed triple-decker complexes Eu2\[Pc(15C5)4](TPP)2 (2) and Eu2\[Pc(15C5)4]2(TPP) (3) were also synthesised by the raise-by-one-story method. These mixed ring sandwich complexes were characterised by various spectroscopic methods. Up to four one-electron oxidations and two one-electron reductions were revealed by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). As shown by electronic absorption and infrared spectroscopy, supramolecular dimers (SM1 and SM3) were formed from the corresponding double-decker 1 and triple-decker 3 in the presence of potassium ions in MeOH/CHCl3.

Raman spectroscopic characteristics of phthalocyanine and naphthalocyanine in sandwich-type phthalocyaninato and porphyrinato rare earth complexes Part 5. – Raman spectroscopic characteristics of naphthalocyanine in mixed [tetrakis(4-tert-butylphenyl)porphyrinato]-(naphthalocyaninato) rare earth double-deckers

Raman spectra were recorded in the range 400–1800 cm−1 for a series of 15 mixed \[tetrakis(4-tert-butylphenyl)porphyrinato](2,3-naphthalocyaninato) rare earth double-deckers M(TBPP)(Nc) (M = Y; La–Lu except Pm) using laser excitation at 632.8 and 785 nm. Comparisons with bis(naphthalocyaninato) rare earth counterparts reveal that the vibrations of the metallonaphthalocyanine M(Nc) fragment dominate the Raman features of M(TBPP)(Nc). When excited with radiation of 632.8 nm, the most intense vibration appears at about 1595 cm−1, due to the naphthalene stretching. These complexes exhibit the marker Raman band for Nc•− as a medium-intense band in the range 1496–1507 cm−1, attributed to the coupling of pyrrole and aza stretching, while the marker Raman band of Nc2− in intermediate-valence Ce(TBPP)(Nc) appears as a strong band at 1493 cm−1 and is due to the isoindole stretchings. By contrast, when excited with radiation of 785 nm that is in close resonance with the main Q absorption band of the naphthalocyanine ligand, the ring radial vibrations at ca 680 and 735 cm−1 for MIII(TBPP)(Nc) are selectively intensified and are the most intense bands. For the cerium double-decker, the most intense vibration also acting as the marker Raman band of Nc2− appears at 1497 cm−1 with contributions from both pyrrole CC and aza CN stretches. The same vibrational modes show weak to medium intensity scattering at 1506–1509 cm−1 for MIII(TBPP)(Nc) and this is the marker Raman band of Nc•− when thus excited. The scatterings due to the Nc breathings, ring radial vibration, aza group stretchings, naphthalene stretchings, benzoisoindole stretchings and the coupling of pyrrole CC and aza CN stretchings in MIII(TBPP)(Nc) are all slightly blue shifted along with the decrease in rare earth ionic radius, confirming the effects of increased ring–ring interactions on the Raman characteristics of naphthalocyanine in the mixed ring double-deckers.

Is the sum more than the corporate entrepreneurship parts? the different effects of social capital on innovation, venturing, and renewal processes

Principal Topic Although corporate entrepreneurship is of vital importance for long-term firm survival and growth (Zahra and Covin, 1995), researchers still struggle with understanding how to manage corporate entrepreneurship activities. Corporate entrepreneurship consists of three parts: innovation, venturing, and renewal processes (Guth and Ginsberg, 1990). Innovation refers to the development of new products, venturing to the creation of new businesses, and renewal to redefining existing businesses (Sharma, and Chrisman, 1999; Verbeke et al., 2007). Although there are many studies focusing on one of these aspects (cf. Burgelman, 1985; Huff et al., 1992), it is very difficult to compare the outcomes of these studies due to differences in contexts, measures, and methodologies. This is a significant lack in our understanding of CE, as firms engage in all three aspects of CE, making it important to compare managerial and organizational antecedents of innovation, venturing and renewal processes. Because factors that may enhance venturing activities may simultaneously inhibit renewal activities. The limited studies that did empirically compare the individual dimensions (cf. Zahra, 1996; Zahra et al., 2000; Yiu and Lau, 2008; Yiu et al., 2007) generally failed to provide a systematic explanation for potential different effects of organizational antecedents on innovation, venturing, and renewal. With this study we aim to investigate the different effects of structural separation and social capital on corporate entrepreneurship activities. The access to existing and the development of new knowledge has been deemed of critical importance in CE-activities (Floyd and Wooldridge, 1999; Covin and Miles, 2007; Katila and Ahuja, 2002). Developing new knowledge can be facilitated by structurally separating corporate entrepreneurial units from mainstream units (cf. Burgelman, 1983; Hill and Rothaermel, 2003; O'Reilly and Tushman, 2004). Existing knowledge and resources are available through networks of social relationships, defined as social capital (Nahapiet and Ghoshal, 1998; Yiu and Lau, 2008). Although social capital has primarily been studied at the organizational level, it might be equally important at top management level (Belliveau et al., 1996). However, little is known about the joint effects of structural separation and integrative mechanisms to provide access to social capital on corporate entrepreneurship. Could these integrative mechanisms for example connect the separated units to facilitate both knowledge creation and sharing? Do these effects differ for innovation, venturing, and renewal processes? Are the effects different for organizational versus top management team integration mechanisms? Corporate entrepreneurship activities have for example been suggested to take place at different levels. Whereas innovation is suggested to be a more bottom-up process, strategic renewal is a more top-down process (Floyd and Lane, 2000; Volberda et al., 2001). Corporate venturing is also a more bottom-up process, but due to the greater required resource commitments relative to innovation, it ventures need to be approved by top management (Burgelman, 1983). As such we will explore the following key research question in this paper: How do social capital and structural separation on organizational and TMT level differentially influence innovation, venturing, and renewal processes? Methodology/Key Propositions We investigated our hypotheses on a final sample of 240 companies in a variety of industries in the Netherlands. All our measures were validated in previous studies. We targeted a second respondent in each firm to reduce problems with single-rater data (James et al., 1984). We separated the measurement of the independent and the dependent variables in two surveys to create a one-year time lag and reduce potential common method bias (Podsakoff et al., 2003). Results and Implications Consistent with our hypotheses, our results show that configurations of structural separation and integrative mechanisms have different effects on the three aspects of corporate entrepreneurship. Innovation was affected by organizational level mechanisms, renewal by integrative mechanisms on top management team level and venturing by mechanisms on both levels. Surprisingly, our results indicated that integrative mechanisms on top management team level had negative effects on corporate entrepreneurship activities. We believe this paper makes two significant contributions. First, we provide more insight in what the effects of ambidextrous organizational forms (i.e. combinations of differentiation and integration mechanisms) are on venturing, innovation and renewal processes. Our findings show that more valuable insights can be gained by comparing the individual parts of corporate entrepreneurship instead of focusing on the whole. Second, we deliver insights in how management can create a facilitative organizational context for these corporate entrepreneurship activities.

Raman spectroscopic study of the mixed anion mineral Yecoraite Bi5Fe3O9(Te4+O3)(Te6+O4)2•9H2O

Tellurates are rare minerals as the tellurate anion is readily reduced to the tellurite ion. Often minerals with both tellurate and tellurite anions in the mineral are found. An example of such a mineral containing tellurate and tellurite is yecoraite. Raman spectroscopy has been used to study this mineral, the exact structure of which is unknown. Two Raman bands at 796 and 808 cm-1 are assigned to the ν1 (TeO4)2- symmetric and ν3 (TeO3)2- antisymmetric stretching modes and Raman bands at 699 cm-1 are attributed to the the ν3 (TeO4)2- antisymmetric stretching mode and the band at 690 cm-1 to the ν1 (TeO3)2- symmetric stretching mode. The intense band at 465 cm-1 with a shoulder at 470 cm-1 is assigned the (TeO4)2- and (TeO3)2- bending modes. Prominent Raman bands are observed at 2878, 2936, 3180 and 3400 cm-1. The band at 3936 cm-1 appears quite distinct and the observation of multiple bands indicates the water molecules in the yecoraite structure are not equivalent. The values for the OH stretching vibrations listed provide hydrogen bond distances of 2.625 Å (2878 cm-1), 2.636 Å (2936 cm-1), 2.697 Å (3180 cm-1) and 2.798 Å (3400 cm-1). This range of hydrogen bonding contributes to the stability of the mineral. A comparison of the Raman spectra of yecoraite with that of tellurate containing minerals kuranakhite, tlapallite and xocomecatlite is made.

Kava Anxiety Depression Spectrum Study (KADSS): a mixed methods RCT using an aqueous extract of Piper methysticum

Objectives: To report on the design, significance and potential impacts of the first documented human clinical trial assessing the anxiolytic and thymoleptic efficacy of an aqueous monoextract of Piper methysticum (kava). The significance of the qualitative element of our clinical trial is also explored. The Kava Anxiety Depression Spectrum Study (KADSS) is a 3-week placebocontrolled, double-blind, cross-over trial involving 60 adult participants (18—65) with elevated stable anxiety and varying levels of depressive symptoms. Aims: The aims of KADSS are: (1) to determine whether an aqueous standardised extract of kava is effective for the treatment of anxiety; (2) to assess the effects of kava on differing levels of depression; and (3) to explore participants’ experience of taking kava via qualitative research. The study also provides preliminary assessment of the safety of an aqueous extract of kava in humans. Conclusion: If results reveal that the aqueous kava preparation exerts significant anxiolytic effects and appears safe, potentially beneficial impacts may occur. Data supporting a safe and effective kava extract may encourage a re-introduction of kava to Europe, UK and Canada. This may provide a major socioeconomic benefit to Pacific Island nations, and to sufferers of anxiety disorders.

Raman spectroscopic study of the mixed anion sulphate-arsenate mineral parnauite Cu9[(OH)10|SO4|(AsO4)2].7H2O

The mixed anion mineral parnauite Cu9[(OH)10|SO4|(AsO4)2].7H2O has been studied by Raman spectroscopy. Characteristic bands associated with arsenate, sulphate, hydroxyl units are identified. Broad bands are observed and are resolved into component bands. Two intense bands at 859 and 830 cm-1 are assigned to the 1 (AsO4)3- symmetric stretching and 3 (AsO4)3- antisymmetric stretching modes. The comparatively sharp band at 976 cm-1 is assigned to the ν1 (SO4)2- symmetric stretching mode and a broad spectral profile centered upon 1097 cm-1 is attributed to the ν3 (SO4)2- antisymmetric stretching mode. A comparison of the Raman spectra is made with other arsenate bearing minerals such as carminite, clinotyrolite, kankite, tilasite and pharmacosiderite.

Implementing change within a school science department: progressive and dissonant voices

The purpose of this study was to describe the teaching and leadership experiences of a science teacher who, as head of department, was preparing to introduce changes in the science department of an independent school in response to the requirements of the new junior science syllabus in Queensland, Australia. This teacher consented to classroom observations and interviews with the researchers where his beliefs about teaching practice and change were explored. Other science teachers at the school also were interviewed about their reactions to the planned changes. Interpretive analysis of the data provides an account of the complex interactions, negotiations, compromises, concessions, and trade-offs faced by the teacher during a period of education reform. Perceived barriers existing within the school that impeded proposed change are identified

Two voices : the marginalised body as a voice & Imperfect Offerings a novel

This thesis investigates the phenomenon of self-harm as a form of political protest using two different, but complementary, methods of inquiry: a theoretical research project and a novel. Through these two approaches, to the same research problem, I examine how we can re-position the body that self-harms in political protest from weapon to voice; and in doing so find a path towards ethical and equitable dialogue between marginalised and mainstream communities. The theoretical, or academic, portion of the thesis examines self-harm as protest, positing these acts as a form of tactical selfharm, and acknowledge its emergence as a voice for the otherwise silenced in the public sphere. Through the use of phenomenology and feminist theory I examine the body as site for political agency, the circumstances which surround the use of the body for protest, and the reaction to tactical self-harm by the individual and the state. Using Bakhtin’s concept of dialogism, and the dialogic space I propose that by ‘hearing’ the body engaged in tactical selfharm we come closer to entering into an ethical dialogue with the otherwise silenced in our communities (locally, nationally and globally). The novel, Imperfect Offerings, explores these ideas in a fictional world, and allows me to put faces, names and lives to those who are compelled to harm their bodies to be heard. Also using Bakhtin’s framework I encourage a dialogue between the critical and creative parts of the thesis, challenging the traditional paradigm of creative PhD projects as creative work and exegesis.