A method for estimating intrinsic noise in electroretinographic (ERG) signals

Purpose To develop a signal processing paradigm for extracting ERG responses to temporal sinusoidal modulation with contrasts ranging from below perceptual threshold to suprathreshold contrasts. To estimate the magnitude of intrinsic noise in ERG signals at different stimulus contrasts. Methods Photopic test stimuli were generated using a 4-primary Maxwellian view optical system. The 4-primary lights were sinusoidally temporally modulated in-phase (36 Hz; 2.5 - 50% Michelson). The stimuli were presented in 1 s epochs separated by a 1 ms blank interval and repeated 160 times (160.16 s duration) during the recording of the continuous flicker ERG from the right eye using DTL fiber electrodes. After artefact rejection, the ERG signal was extracted using Fourier methods in each of the 1 s epochs where a stimulus was presented. The signal processing allows for computation of the intrinsic noise distribution in addition to the signal to noise (SNR) ratio. Results We provide the initial report that the ERG intrinsic noise distribution is independent of stimulus contrast whereas SNR decreases linearly with decreasing contrast until the noise limit at ~2.5%. The 1ms blank intervals between epochs de-correlated the ERG signal at the line frequency (50 Hz) and thus increased the SNR of the averaged response. We confirm that response amplitude increases linearly with stimulus contrast. The phase response shows a shallow positive relationship with stimulus contrast. Conclusions This new technique will enable recording of intrinsic noise in ERG signals above and below perceptual visual threshold and is suitable for measurement of continuous rod and cone ERGs across a range of temporal frequencies, and post-receptoral processing in the primary retinogeniculate pathways at low stimulus contrasts. The intrinsic noise distribution may have application as a biomarker for detecting changes in disease progression or treatment efficacy.

Response efficacy : the key to minimizing rejection and maximizing acceptance of emotion-based anti-speeding messages

This study sought to improve understanding of the persuasive process of emotion-based appeals not only in relation to negative, fear-based appeals but also for appeals based upon positive emotions. In particular, the study investigated whether response efficacy, as a cognitive construct, mediated outcome measures of message effectiveness in terms of both acceptance and rejection of negative and positive emotion-based messages. Licensed drivers (N = 406) participated via the completion of an on-line survey. Within the survey, participants received either a negative (fear-based) appeal or one of the two possible positive appeals (pride or humor-based). Overall, the study's findings confirmed the importance of emotional and cognitive components of persuasive health messages and identified response efficacy as a key cognitive construct influencing the effectiveness of not only fear-based messages but also positive emotion-based messages. Interestingly, however, the results suggested that response efficacy's influence on message effectiveness may differ for positive and negative emotion-based appeals such that significant indirect (and mediational) effects were found with both acceptance and rejection of the positive appeals yet only with rejection of the fear-based appeal. As such, the study's findings provide an important extension to extant literature and may inform future advertising message design.

Geologically ancient DNA: fact or artefact?

Studies continue to report ancient DNA sequences and viable microbial cells that are many millions of years old. In this paper we evaluate some of the most extravagant claims of geologically ancient DNA. We conclude that although exciting, the reports suffer from inadequate experimental setup and insufficient authentication of results. Consequently, it remains doubtful whether amplifiable DNA sequences and viable bacteria can survive over geological timescales. To enhance the credibility of future studies and assist in discarding false-positive results, we propose a rigorous set of authentication criteria for work with geologically ancient DNA.

Correction of step artefact associated with MRI scanning of long bones

3D models of long bones are being utilised for a number of fields including orthopaedic implant design. Accurate reconstruction of 3D models is of utmost importance to design accurate implants to allow achieving a good alignment between two bone fragments. Thus for this purpose, CT scanners are employed to acquire accurate bone data exposing an individual to a high amount of ionising radiation. Magnetic resonance imaging (MRI) has been shown to be a potential alternative to computed tomography (CT) for scanning of volunteers for 3D reconstruction of long bones, essentially avoiding the high radiation dose from CT. In MRI imaging of long bones, the artefacts due to random movements of the skeletal system create challenges for researchers as they generate inaccuracies in the 3D models generated by using data sets containing such artefacts. One of the defects that have been observed during an initial study is the lateral shift artefact occurring in the reconstructed 3D models. This artefact is believed to result from volunteers moving the leg during two successive scanning stages (the lower limb has to be scanned in at least five stages due to the limited scanning length of the scanner). As this artefact creates inaccuracies in the implants designed using these models, it needs to be corrected before the application of 3D models to implant design. Therefore, this study aimed to correct the lateral shift artefact using 3D modelling techniques. The femora of five ovine hind limbs were scanned with a 3T MRI scanner using a 3D vibe based protocol. The scanning was conducted in two halves, while maintaining a good overlap between them. A lateral shift was generated by moving the limb several millimetres between two scanning stages. The 3D models were reconstructed using a multi threshold segmentation method. The correction of the artefact was achieved by aligning the two halves using the robust iterative closest point (ICP) algorithm, with the help of the overlapping region between the two. The models with the corrected artefact were compared with the reference model generated by CT scanning of the same sample. The results indicate that the correction of the artefact was achieved with an average deviation of 0.32 ± 0.02 mm between the corrected model and the reference model. In comparison, the model obtained from a single MRI scan generated an average error of 0.25 ± 0.02 mm when compared with the reference model. An average deviation of 0.34 ± 0.04 mm was seen when the models generated after the table was moved were compared to the reference models; thus, the movement of the table is also a contributing factor to the motion artefacts.

Artefact and iteration : circular entanglements

In this workshop proposal I discuss a case study physical computing environment named Talk2Me. This work was exhibited in February 2006 at The Block, Brisbane as an interactive installation in the early stages of its development. The major artefact in this work is a 10 metre wide X 3 metre high light-permeable white dome. There are other technologies and artefacts contained within the dome that make up this interactive environment. The dome artefact has impacted heavily on the design process, including shaping the types of interactions involved, the kinds of technologies employed, and the choice of other artefacts. In this workshop paper, I chart some of the various iterations Talk2Me has undergone in the design process.

Artefact ecologies : supporting embodied meeting practices with distance access

Frameworks such as activity theory, distributed cognition and structuration theory, amongst others, have shown that detailed study of contextual settings where users work (or live) can help the design of interactive systems. However, these frameworks do not adequately focus on accounting for the materiality (and embodiment) of the contextual settings. Within the IST-EU funded AMIDA project (Augmented Multiparty Interaction with Distance Access) we are looking into supporting meeting practices with distance access. Meetings are inherently embodied in everyday work life and that material artefacts associated with meeting practices play a critical role in their formation. Our eventual goal is to develop a deeper understanding of the dynamic and embodied nature of meeting practices and designing technologies to support these. In this paper we introduce the notion of "artefact ecologies" as a conceptual base for understanding embodied meeting practices with distance access. Artefact ecologies refer to a system consisting of different digital and physical artefacts, people, their work practices and values and lays emphasis on the role artefacts play in embodiment, work coordination and supporting remote awareness. In the end we layout our plans for designing technologies for supporting embodied meeting practices within the AMIDA project.

Legitimising Rejection : International Refugee Law in Southeast Asia

The 1951 Convention Relating to the Status of Refugees and the 1967 Protocol Relating to the Status of Refugees are the two primary international legal instruments that states use to process asylum seekers' claim to refugee status. However, in Southeast Asia only two states have acceded to these instruments. This is seemingly paradoxical for a region that has been host to a large number of asylum seekers who, as a result, are forced to live as ‘illegal migrants’. This book examines the region's continued rejection of international refugee law through extensive archival analysis and argues that this rejection was shaped by the region’s response to its largest refugee crisis in the post-1945 era: the Indochinese refugee crisis from 1975 to 1996. The result is a seminal study into Southeast Asian's relationship with international refugee law and the impact that this has had on states surrounding the region, the UNHCR and the asylum seekers themselves.

A frequency adaptive single-phase Phase-Locked Loop with harmonic rejection

An improved Phase-Locked Loop (PLL) for extracting phase and frequency of the fundamental component of a highly distorted grid voltage is presented. The structure of the single-phase PLL is based on the Synchronous Reference Frame (SRF) PLL and uses an All Pass Filter (APF) to generate the quadrature component from the single phase input voltage. In order to filter the harmonic content, a Moving Average Filter (MAF) is used, and performance is improved by designing a lead compensator and also a feed-forward compensator. The simulation results are compared to show the improved performance with feed-forward. In addition, the frequency dependency of MAF is dealt with by a proposed method for adaption to the frequency. This method changes the window size based on the frequency on a sample-by-sample basis. By using this method, the speed of resizing can be reduced in order to decrease the output ripples caused by window size variations.

Refactoring Service Interface to Support Artefact-centric Service interaction

The growth of APIs and Web services on the Internet, especially through larger enterprise systems increasingly being leveraged for Cloud and software-as-a-service opportunities, poses challenges for improving the efficiency of integration with these services. Interfaces of enterprise systems are typically larger, more complex and overloaded, with single operations having multiple data entities and parameter sets, supporting varying requests, and reflecting versioning across different system releases, compared to fine-grained operations of contemporary interfaces. We propose a technique to support the refactoring of service interfaces by deriving business entities and their relationships. In this paper, we focus on the behavioural aspects of service interfaces, aiming to discover the sequential dependencies of operations (otherwise known as protocol extraction) based on the entities and relationships derived. Specifically, we propose heuristics according to these relationships, and in turn, deriving permissible orders in which operations are invoked. As a result of this, service operations can be refactored on business entity CRUD lines, with explicit behavioural protocols as part of an interface definition. This supports flexible service discovery, composition and integration. A prototypical implementation and analysis of existing Web services, including those of commercial logistic systems (Fedex), are used to validate the algorithms proposed through the paper.

Feeling left out? The mediating role of perceived rejection on workgroup mistreatment and affective, behavioral, and organizational outcomes and the moderating role of organizational norms

This two-study paper examines the detrimental impact of workgroup mistreatment and the mediating role of perceived rejection. In Study 1, perceived rejection emerged as a mediator between workgroup mistreatment and depression, organization-based self-esteem, organizational deviance, and organizational citizenship behaviors. In Study 2, the role of organizational norms was examined. Employees who experienced supportive organizational norms reported lower levels of perceived rejection, depression and turnover intentions, and higher levels of organization-based self-esteem and job satisfaction. Employees in the supportive norms condition reported that they were more likely to seek reconciliation after experiencing mistreatment than those who experienced low support. Perceived rejection also emerged as a mediator. Results, practical implications, and future research directions are discussed.

Emotional anguish at work: The mediating role of perceived rejection on workgroup mistreatment and affective outcomes

In this study, the authors pay particular attention to mistreatment directed toward an organizational member from fellow workgroup members. The study contributes to the growing body of literature that examines the mistreatment of employees in the workplace. The authors propose that mistreatment by the workgroup would contribute to feelings of rejection, over and above mistreatment by the supervisor. In addition, the authors tested the mediating role of perceived rejection between workgroup mistreatment and affective outcomes such as depression and organization-based self-esteem. Part-time working participants (N = 142) took part in the study, which required them to complete a questionnaire on workplace behaviors. Results indicated that workgroup mistreatment contributed additional variance to perceived rejection over and above supervisory mistreatment when predicting depression and organization-based self-esteem. The results also indicated that perceived rejection mediates the relationship between mistreatment and affective outcomes. Results are discussed and implications for research and practice are considered.

Social networking sites and participatory reluctance: A case study of Gaydar, user resistance and interface rejection

This article conceptualises ‘participatory reluctance’ as a particular orientation to social media that problematises binarised notions of connection and disconnection in social networking sites. It qualitatively examines how the concept has functioned within gay men’s social networking service, Gaydar, among 18- to 28-year-old users of the site in Brisbane, Australia. Participatory reluctance is shown to be a central aspect of the culture of this space, fostered among the studied demographic by the convergence of the growing global push for marriage equality and increasing normalisation of the kinds of gay male identities commonly adopted among this group, with three key factors rooted primarily in Gaydar’s design: (1) young users’ perceptions of the site as a space for procuring casual sex; (2) their perceptions of the imagined user as embodying existing stereotypes of gay masculinity, and; (3) a lack of genuine alternatives in terms of niche digital spaces for gay men’s social networking.