Model development and dynamic load-sharing analysis of longitudinal-connected air suspensions

The objective of this research was to investigate the effect of suspension parameters on dynamic load-sharing of longitudinal-connected air suspensions of a tri-axle semi-trailer. A novel nonlinear model of a multi-axle semi-trailer with longitudinal-connected air suspension was formulated based on fluid mechanics and thermodynamics and was validated through test results. The effects of suspension parameters on dynamic load-sharing and road-friendliness of the semi-trailer were analyzed. Simulation results indicate that the road-friendliness metric DLC (Dynamic Load Coefficient), is generally in accordance with the load-sharing metric - DLSC (Dynamic Load Sharing Coefficient). When the static height or static pressure increases, the DLSC optimization ratio declines monotonically. The effect of employing larger air lines and connectors on the DLSC optimization ratio gives varying results as road roughness increases and as driving speed increases. The results also indicate that if the air line diameter is always assumed to be larger than the connector diameter, the influence of air line diameter on load-sharing is more significant than that of the connector.

Predictors of sexually transmitted infection in Australian women : evidence from the Australian longitudinal study on women’s health

This longitudinal study examined characteristics of women diagnosed with sexually transmitted infections (STI) for the first time in their later 20s and early 30s. Participants were 6,840 women (born 1973–1978) from the Australian Longitudinal Study on Women’s Health. Women aged 18–23 years were surveyed in 1996 (S1), 2000 (S2), 2003 (S3), and 2006 (S4). There were 269 women reporting an STI for the first time at S3 or S4. Using two multivariable logistic regression analyses (examining 18 predictor variables), these 269 women were compared (1) with 306 women who reported an STI at S2 and (2) with 5,214 women who never reported an STI across the four surveys. Women who reported an STI for the first time at S3 or S4 were less likely to have been pregnant or had a recent Pap smear compared to women reporting an STI at S2.Women reporting a first STI at S3 or S4 were less likely to have been pregnant or had a recent Pap smear compared to women reporting an STI at S2. Women were more likely to report an STI for the first time at S3 or S4 compared to women not reporting an STI at any survey if they were younger, unpartnered, had a higher number of sexual partners, had never been pregnant, were recently divorced or separated, and reported poorer access to Women’s Health or Family Planning Centres at S2. These findings demonstrate the value of longitudinal studies of sexual health over the life course beyond adolescence.

Curbing resource consumption using team-based feedback : paper printing in a longitudinal case study

This paper details a team-based feedback approach for reducing resource consumption. The approach uses paper printing within office environments as a case study. It communicates the print usage of each participant’s team rather than the participant’s individual print usage. Feedback is provided weekly via emails and contains normative information, along with eco-metrics and team-based comparative statistics. The approach was empirically evaluated to study the effectiveness of the feedback method. The experiment comprised of 16 people belonging to 4 teams with data on their print usage gathered over 58 weeks, using the first 30-35 weeks as a baseline. The study showed a significant reduction in individual printing with an average of 28%. The experiment confirms the underlying hypothesis that participants are persuaded to reduce their print usage in order to improve the overall printing behaviour of their teams. The research provides clear pathways for future research to qualitatively investigate our findings.

Reproductive health : findings from the Australian Longitudinal Study on Women’s Health. Chapter 3: Use of contraception

Chapter 3: Use of contraception. p15-32 Key findings: This section examines trends in the use of contraception between 1996 and 2006 by women who participated in the surveys for the 1973-1978 cohort of the Australian Longitudinal Study on Women’s Health. 1. The oral contraceptive pill was the most commonly used method of contraception at each survey, but its use decreased over time. 2.Of women who consistently used contraception, 40% used the oral contraceptive pill as their only method of contraception in at least three out of four surveys. 3. The proportion of women using condoms as their only method of contraception remained steady over time (15-18%) but only 3% of all women used condoms only at every survey. 4. The proportion of women using both condoms and the oral contraceptive pill remained steady at 13-14% of all women from Survey 1 to 3, but decreased to 8% of all women at Survey 4. 5. The use of methods other than the oral contraceptive pill and/or condoms increased at Survey 4. 6. The proportion of women using an implant (e.g. Implanon) remained steady between Surveys 3 and 4, with 3% of women using an implant only. Around one third of implant users at Survey 3 continued to use this method at Survey 4. 7. The main reasons for not using contraception at Surveys 3 and 4 were pregnancy, trying to conceive, or no male sexual partners. 8. Women who used contraception were more likely to be in de facto relationships or single, be up to date with Pap tests and have had two or more births. 9. Women who did not use contraception were more likely to be non-drinkers and/or do low levels of exercise, have had one birth and have experienced miscarriage. 10. Contraception changed in expected ways according to reproductive events: women who reported only miscarriages between surveys also stopped using contraception in the same period; most women who did not report reproductive events continued to use the same method of contraception; and women who had a termination tended to switch methods.

Reproductive health: findings from the Australian Longitudinal Study on Women’s Health. Chapter 5: fertility and infertility

Chapter 5: Fertility and infertility. p52-70. This section describes patterns of fertility across Surveys 1 to 4 among the cohort of women who were born in 1973-1978. This section includes the examination of pregnancy outcomes including both live births and pregnancy losses (stillbirths, miscarriages, terminations and ectopic pregnancies). This section also examines the prevalence of self-reported problems with fertility and whether these women sought advice and/or treatment. As women age they are more likely to experience infertility and, with little other data available, the ALSWH provides an important opportunity to examine this problem and the related use of health services. 1. Pregnancy losses are common. Half of the women who report a pregnancy outcome at Survey 4 have experienced a pregnancy loss. 2. More than one third (39%) of women who have experienced a live birth by Survey 4 have also experienced a pregnancy loss. 3. For every ten women aged 28-33 years in 2006: four women had not had been pregnant, five women had a live birth (with or without a recognised pregnancy loss), and one woman had a recognised pregnancy loss only. 4. Among women who had tried to conceive or had been pregnant, one-in-six had experienced infertility. (i.e. tried unsuccessfully to get pregnant for 12 months or more) 5. The most significant factors associated with having infertility, seeking advice and using treatment were: polycystic ovary syndrome, endometriosis and miscarriage. 6. Of the women who reported infertility, two-thirds sought advice but only half used treatment. 7. Most of the women who used fertility treatment had used low cost and non-invasive methods.

Imaging fluid solid interactions in hydrocarbon reservoir rocks

The environmental scanning electron microscope (ESEM) has been used to image liquid hydrocarbons in sandstones and oil shales. Additionally, the fluid sensitivity of selected clay minerals in hydrocarbon reservoirs was assessed via three case studies: HCl acid sensitivity of authigenic chlorite in sandstone reservoirs, freshwater sensitivity of authigenic illite/smectite in sandstone reservoirs, and bleach sensitivity of a volcanic reservoir containing abundant secondary chlorite/corrensite. The results showed the suitability of using ESEM for imaging liquid hydrocarbon films in hydrocarbon reservoirs and the importance of simulating in situ fluid-rock interactions for hydrocarbon production programmes. In each case, results of the ESEM studies greatly enhanced prediction of reservoir/borehole reactions and, in some cases, contradicted conventional wisdom regarding the outcome of potential engineering solutions. (C) 1993 Wiley-Liss, Inc.

High-resolution imaging of ordered mixed-layer clays

HRTEM has been used to examine illite/smectite from the Mancos shale, rectorite from Garland County, Arkansas; illite from Silver Hill, Montana; Na-smectite from Crook County, Wyoming; corrensite from Packwood, Washington; and diagenetic chlorite from the Tuscaloosa formation. Thin specimens were prepared by ion milling, ultra-microtome sectioning and/or grain dispersal on a porous carbon substrate. Some smectite-bearing clays were also examined after intercalation with dodecylamine hydrochloride (DH). Intercalation of smectite with DH proved to be a reliable method of HRTEM imaging of expanded smectite, d(001) 16 A which could then be distinguished from unexpanded illite, d(001) 10 A. Lattice fringes of basal spacings of DH-intercalated rectorite and illite/smectite showed 26 A periodicity. These data support XRD studies which suggest that these samples are ordered, interstratified varieties of illite and smectite. The ion-thinned, unexpanded corrensite sample showed discrete crystallites containing 10 A and 14 A basal spacings corresponding with collapsed smectite and chlorite, respectively. Regions containing disordered layers of chlorite and smectite were also noted. Crystallites containing regular alternations of smectite and chlorite were not common. These HRTEM observations of corrensite did not corroborate XRD data. Particle sizes parallel to the c axis ranged widely for each sample studied, and many particles showed basal dimensions equivalent to > five layers. -J.M.H.

Imaging affect : abstraction and the echo of the unknowable

As an artist my primary interest is in the abstract, that is in images of the imageless. I am curious about the emergence of pictorial significance and content from this unknowable space. To speak of the significance of an imageless image is also to speak of its affect. I aim to explore this both theoretically and practically. Theoretically I will explore affect through the late work of Lyotard and his notion of the affect-phrase. This is an under-examined aspect of Lyotard and demarcates a valuable way to look at the origins, impact and ramifications of affect for art. Practically I will apply these understandings to the development of my own creative work which includes both painting and digital work. My studio practice moves towards exploring the unfamiliar through the powerful and restless silence of affect.In this intense space each work or body of work 'leaks' into the next occasioning a sense of borderlessness, or of uncertainty. This interpenetration and co-mingling of conceptual and material terrains combines to present temporal and spatial slippages evident within the works themselves and their making, but it is also evident in bodies of work across the chronology of their making. Through a mapping of my own painting and digital arts practice and the utilisation of Lyotard’s notion of the affect -phrase I aim to describe the action of this ‘charged emptiness’ on creativity and explore and explain its significance on that we call image and its animation of what we call critical discourse.

High resolution imaging of boron carbide microstructures

Two samples of boron carbide have been examined using high resolution transmission electron microscopy (HRTEM). A hot pressed B13C2 sample shows a high density of variable width twins normal to (10-11). Subtle shifts or offsets of lattice fringes along the twin plane and normal to (10 5) were also observed. A B4C powder showed little evidence of stacking disorder in crystalline regions.

Ventilation distribution in rats : part 2 – a comparison of electrical impedance tomography and hyperpolarised helium magnetic resonance imaging

Background: Hyperpolarised helium MRI (He3 MRI) is a new technique that enables imaging of the air distribution within the lungs. This allows accurate determination of the ventilation distribution in vivo. The technique has the disadvantages of requiring an expensive helium isotope, complex apparatus and moving the patient to a compatible MRI scanner. Electrical impedance tomography (EIT) a non-invasive bedside technique that allows constant monitoring of lung impedance, which is dependent on changes in air space capacity in the lung. We have used He3MRI measurements of ventilation distribution as the gold standard for assessment of EIT. Methods: Seven rats were ventilated in supine, prone, left and right lateral position with 70% helium/30% oxygen for EIT measurements and pure helium for He3 MRI. The same ventilator and settings were used for both measurements. Image dimensions, geometric centre and global in homogeneity index were calculated. Results: EIT images were smaller and of lower resolution and contained less anatomical detail than those from He3 MRI. However, both methods could measure positional induced changes in lung ventilation, as assessed by the geometric centre. The global in homogeneity index were comparable between the techniques. Conclusion: EIT is a suitable technique for monitoring ventilation distribution and inhomgeneity as assessed by comparison with He3 MRI.

Effect of driving conditions and suspension parameters on dynamic load-sharing of longitudinal-connected air suspensions

The objective of this research was to investigate the effects of driving conditions and suspension parameters on dynamic load-sharing of longitudinal-connected air suspensions of a tri-axle semi-trailer. A novel nonlinear model of a multi-axle semi-trailer with longitudinal-connected air suspension was formulated based on fluid mechanics and thermodynamics and was validated through test results. The effects of driving conditions and suspension parameters on dynamic load-sharing and road-friendliness of the semi-trailer were analyzed. Simulation results indicate that the road-friendliness metric-DLC (dynamic load coefficient) is not always in accordance with the load-sharing metric-DLSC (dynamic load-sharing coefficient). The effect of employing larger air lines and connectors on the DLSC optimization ratio gives varying results as road roughness increases and as driving speed increases. When the vehicle load reduces, or the static pressure increases, the DLSC optimization ratio declines monotonically. The results also indicate that if the air line diameter is always assumed to be larger than the connector diameter, the influence of air line diameter on load-sharing is more significant than that of the connector.

Working for a better life : longitudinal evidence on the predictors of employment among recently arrived refugee migrant men living in Australia

Although a number of studies have investigated the predictors of employment among refugee migrants, there is a dearth of evidence from longitudinal data. This study investigated the cross-sectional and longitudinal predictors of employment among 233 adult refugee men living in South-East Queensland, Australia. Participants were interviewed four times at six-month intervals between 2008 and 2010. Using a conceptual model developed from the literature, Generalised Estimating Equations were used to model the predictors of employment. Over time, the employment rate increased from 44 percent to 56 percent. Region of birth, length of time in Australia, seeking employment through job service providers and informal networks, and owning a car were significant predictors of employment. Contrary to previous research, English language proficiency was not a significant predictor when other variables were controlled for. Recognition of overseas skills and qualifications decreased the chances of finding employment. The policy and program implications are discussed.

Measuring mechanical properties of tendon in vivo

Introduction: Understanding the mechanical properties of tendon is an important step to guiding the process of improving athletic performance, predicting injury and treating tendinopathies. The speed of sound in a medium is governed by the bulk modulus and density for fluids and isotropic materials. However, for tendon,which is a structural composite of fluid and collagen, there is some anisotropy requiring an adjustment for Poisson’s ratio. In this paper, these relationships are explored and modelled using data collected, in vivo, on human Achilles tendon. Estimates for elastic modulus and hysteresis based on speed of sound data are then compared against published values from in vitro mechanical tests. Methods: Measurements using clinical ultrasound imaging, inverse dynamics and acoustic transmission techniques were used to determine dimensions, loading conditions and longitudinal speed of sound for the Achilles tendon during a series of isometric plantar flexion exercises against body weight. Upper and lower bounds for speed of sound versus tensile stress in the tendon were then modelled and estimates derived for elastic modulus and hysteresis. Results: Axial speed of sound varied between 1850 to 2090 m.s−1 with a non-linear, asymptotic dependency on the level of tensile stress in the tendon 5–35 MPa. Estimates derived for the elastic modulus ranged between 1–2 GPa. Hysteresis derived from models of the stress-strain relationship, ranged from 3–11%. These values agree closely with those previously reported from direct measurements obtained via in vitro mechanical tensile tests on major weight bearing tendons. Discussion: There is sufficiently good agreement between these indirect (speed of sound derived) and direct (mechanical tensile test derived) measures of tendon mechanical properties to validate the use of this non-invasive acoustic transmission technique. This non-invasive method is suitable for monitoring changes in tendon properties as predictors of athletic performance, injury or therapeutic progression.