Predictors of initiating and maintaining active commuting to work using transport and public health perspectives in Australia

Objective To identify predictors for initiating and maintaining active commuting (AC) to work following the 2003 Australia's Walk to Work Day (WTWD) campaign. Methods Pre- and post-campaign telephone surveys of a cohort of working age (18–65years) adults (n = 1100, 55% response rate). Two dependent campaign outcomes were assessed: initiating or maintaining AC (i.e., walk/cycle and public transport) on a single day (WTWD), and increasing or maintaining health-enhancing active commuting (HEAC) level (≥ 30min/day) in a usual week following WTWD campaign. Results A significant population-level increase in HEAC (3.9%) was observed (McNemar's χ2 = 6.53, p = 0.01) with 136 (19.0%) achieving HEAC at post campaign. High confidence in incorporating walking into commute, being active pre-campaign and younger age (< 46years) were positively associated with both outcomes. The utility of AC for avoiding parking hassles (AOR = 2.1, 95% CI: 1.2–3.6), for less expense (AOR = 1.8, 95% CI: 1.1–3.1), for increasing one's health (AOR = 2.5, 95% CI: 1.1–5.6) and for clean air (AOR = 2.2, 95% CI: 1.0–4.4) predicted HEAC outcome whereas avoiding the stress of driving (AOR = 2.6, 95% CI: 1.4–5.0) and the hassle of parking predicted the single-day AC. Conclusions Transportation interventions targeting parking and costs could be further enhanced by emphasizing health benefits of AC. AC was less likely to occur among inactive employees.

A high performance feedback active noise control system

In many active noise control (ANC) applications, an online secondary path modelling method that uses a white noise as a training signal is required. This paper proposes a new feedback ANC system. Here we modified both the FxLMS and the VSS-LMS algorithms to raised noise attenuation and modelling accuracy for the overall system. The proposed algorithm stops injection of the white noise at the optimum point and reactivate the injection during the operation, if needed, to maintain performance of the system. Preventing continuous injection of the white noise increases the performance of the proposed method significantly and makes it more desirable for practical ANC systems. Computer simulation results shown in this paper indicate effectiveness of the proposed method.

Material yielding by both axial and bending spring stiffness at elevated temperature

Material yielding is typically modeled either by plastic zone or plastic hinge methods under the context of geometric and material nonlinear finite element methods. In fire analysis of steel structures, the plastic zone method is widely used, but it requires extensively more computational efforts. The objective of this paper is to develop the nonlinear material model allowing for interaction of both axial force and bending moment, which relies on the plastic hinge method to achieve numerical efficiency and reduce computational effort. The biggest advantage of the plastic-hinge approach is its computational efficiency and easy verification by the design code formulae of the axial force–moment interaction yield criterion for beam–column members. Further, the method is reliable and robust when used in analysis of practical and large structures. In order to allow for the effect of catenary action, axial thermal expansion is considered in the axial restraint equations. The yield function for material yielding incorporated in the stiffness formulation, which allows for both axial force and bending moment effects, is more accurate and rational to predict the behaviour of the frames under fire. In the present fire analysis, the mechanical properties at elevated temperatures follow mainly the Eurocode 3 [Design of steel structures, Part 1.2: Structural fire design. European Committee for Standisation; 2003]. Example of a tension member at a steady state heating condition is modeled to verify the proposed spring formulation and to compare with results by others. The behaviour of a heated member in a highly redundant structure is also studied by the present approach.

Mesoporous titania microspheres composed of exposed active faceted nanosheets and their catalytic activities for solvent-free synthesis of azoxybenzenes

Mesoporous titania microspheres composed of nanosheets with exposed active facets were prepared by hydrothermal synthesis in the presence of hexafluorosilicic acid. They exhibited superior catalytic activity in the solvent-free synthesis of azoxybenzene by oxidation of aniline and could be used for 7 cycles with slight loss of activity.

Environmental factors associated with active living in retirement village residents : findings from an exploratory qualitative enquiry

This exploratory enquiry employs qualitative methods to advance knowledge and understanding of physical environmental attributes related to active living among residents of Australian retirement villages. Six focus groups (n = 51 residents) were held and participants described how their current, and subsequently ideal, retirement village and neighborhood supported active lifestyles. Thematic analysis revealed three key environmental factors associated with active living: a positive social environment within the village; services and facilities provided in the village and wider neighborhood; and the presence of suitable pedestrian infrastructure. The unique discovery that environmental factors of both the retirement village and the surrounding neighborhood were associated with residents’ active living raises many questions for study. Findings informed the development of a survey instrument, and further understanding in this area has the potential to contribute to the design and siting practices of senior housing complexes within neighborhoods.

Exploring socioecological correlates of active living in retirement village residents

This study explored individual, social, and built environmental attributes in and outside of the retirement village setting and associations with various active living outcomes including objectively measured physical activity, specific walking behaviors, and social participation. Residents in Perth, Australia (N = 323), were surveyed on environmental perceptions of the village and surrounding neighborhood, self-reported physical activity, and demographic characteristics and wore accelerometers. Managers (N = 32) were surveyed on village characteristics, and objective neighborhood measures were generated in a Geographic Information System (GIS). Results indicated that built- and social-environmental attributes within and outside of retirement villages were associated with active living among residents; however, salient attributes varied depending on the specific outcome considered. Findings suggest that locating villages close to destinations is important for walking and that locating them close to previous and familiar neighborhoods is important for social participation. Further understanding and consideration into retirement village designs that promote both walking and social participation are needed.

From single crystal surfaces to single atoms : investigating active sites in electrocatalysis

Electrocatalytic processes will undoubtedly be at the heart of energising future transportation and technology with the added importance of being able to create the necessary fuels required to do so in an environmentally friendly and cost effective manner. For this to be successful two almost mutually exclusive surface properties need to be reconciled, namely producing highly active/reactive surface sites that exhibit long term stability. This article reviews the various approaches which have been undertaken to study the elusive nature of these active sites on metal surfaces which are considered as adatoms or clusters of adatoms with low coordination number. This includes the pioneering studies at extended well defined stepped single crystal surfaces using cyclic voltammetry up to the highly sophisticated in situ electrochemical imaging techniques used to study chemically synthesised nanomaterials. By combining the information attained from single crystal surfaces, individual nanoparticles of defined size and shape, density functional theory calculations and new concepts such as mesoporous multimetallic thin films and single atom electrocatalysts new insights into the design and fabrication of materials with highly active but stable active sites can be achieved. The area of electrocatalysis is therefore not only a fascinating and exciting field in terms of realistic technological and economical benefits but also from the fundamental understanding that can be acquired by studying such an array of interesting materials.

Consultant engagement for computer system selection: a pro-active client role in small enterprises

Because of their limited number of senior positions and fewer alternative career paths, small businesses have a more difficult time attracting and retaining skilled information systems (IS) staff and are thus dependent upon external expertise. Small businesses are particularly dependent on outside expertise when first computerizing. Because small businesses suffer from severe financial constraints. it is often difficult to justify the cost of custom software. Hence. for many small businesses, engaging a consultant to help with identifying suitable packaged software and related hardware, is their first critical step toward computerization. This study explores the importance of proactive client involvement when engaging a consultant to assist with computer system selection in small businesses. Client involvement throughout consultant engagement is found to be integral to project success and frequently lacking due to misconceptions of small businesses regarding their role. Small businesses often overestimate the impact of consultant and vendor support in achieving successful computer system selection and implementation. For consultant engagement to be successful, the process must be viewed as being directed toward the achievement of specific organizational results where the client accepts responsibility for direction of the process.

Active security in multiparty computation over black-box groups

Most previous work on unconditionally secure multiparty computation has focused on computing over a finite field (or ring). Multiparty computation over other algebraic structures has not received much attention, but is an interesting topic whose study may provide new and improved tools for certain applications. At CRYPTO 2007, Desmedt et al introduced a construction for a passive-secure multiparty multiplication protocol for black-box groups, reducing it to a certain graph coloring problem, leaving as an open problem to achieve security against active attacks. We present the first n-party protocol for unconditionally secure multiparty computation over a black-box group which is secure under an active attack model, tolerating any adversary structure Δ satisfying the Q 3 property (in which no union of three subsets from Δ covers the whole player set), which is known to be necessary for achieving security in the active setting. Our protocol uses Maurer’s Verifiable Secret Sharing (VSS) but preserves the essential simplicity of the graph-based approach of Desmedt et al, which avoids each shareholder having to rerun the full VSS protocol after each local computation. A corollary of our result is a new active-secure protocol for general multiparty computation of an arbitrary Boolean circuit.

Promoting active lifestyles in young children: investigating mothers’ decisions about their child’s physical activity and screen time behaviours

Objectives Given increasing trends of obesity being noted from early in life and that active lifestyles track across time, it is important that children at a very young age be active to combat a foundation of unhealthy behaviours forming. This study investigated, within a theory of planned behaviour (TPB) framework, factors which influence mothers’ decisions about their child’s 1) adequate physical activity (PA) and 2) limited screen time behaviours. Methods Mothers (N = 162) completed a main questionnaire, via on-line or paper-based administration, which comprised standard TPB items in addition to measures of planning and background demographic variables. One week later, consenting mothers completed a follow-up telephone questionnaire which assessed the decisions they had made regarding their child’s PA and screen time behaviours during the previous week. Results Hierarchical multiple regression analyses revealed support for the predictive model, explaining an overall 73% and 78% of the variance in mothers’ intention and 38% and 53% of the variance in mothers’ decisions to ensure their child engages in adequate PA and limited screen time, respectively. Attitude and subjective norms predicted intention in both target behaviours, as did intentions with behaviour. Contrary to predictions, perceived behavioural control (PBC) in PA behaviour and planning in screen time behaviour were not significant predictors of intention, neither was PBC a predictor of either behaviour. Conclusions The findings illustrate the various roles that psycho-social factors play in mothers’ decisions to ensure their child engages in active lifestyle behaviours which can help to inform future intervention programs aimed at combating very young children’s inactivity.

Active awareness : supporting the intentional disclosure of awareness information in collaborative systems

This thesis opens up the design space for awareness research in CSCW and HCI. By challenging the prevalent understanding of roles in awareness processes and exploring different mechanisms for actively engaging users in the awareness process, this thesis provides a better understanding of the complexity of these processes and suggests practical solutions for designing and implementing systems that support active awareness. Mutual awareness, a prominent research topic in the fields of Computer-Supported Cooperative Work (CSCW) and Human-Computer Interaction (HCI) refers to a fundamental aspect of a person’s work: their ability to gain a better understanding of a situation by perceiving and interpreting their co-workers actions. Technologically-mediated awareness, used to support co-workers across distributed settings, distinguishes between the roles of the actor, whose actions are often limited to being the target of an automated data gathering processes, and the receiver, who wants to be made aware of the actors’ actions. This receiver-centric view of awareness, focusing on helping receivers to deal with complex sets of awareness information, stands in stark contrast to our understanding of awareness as social process involving complex interactions between both actors and receivers. It fails to take into account an actors’ intimate understanding of their own activities and the contribution that this subjective understanding could make in providing richer awareness information. In this thesis I challenge the prevalent receiver-centric notion of awareness, and explore the conceptual foundations, design, implementation and evaluation of an alternative active awareness approach by making the following five contributions. Firstly, I identify the limitations of existing awareness research and solicit further evidence to support the notion of active awareness. I analyse ethnographic workplace studies that demonstrate how actors engage in an intricate interplay involving the monitoring of their co-workers progress and displaying aspects of their activities that may be of relevance to others. The examination of a large body of awareness research reveals that while disclosing information is a common practice in face-to-face collaborative settings it has been neglected in implementations of technically mediated awareness. Based on these considerations, I introduce the notion of intentional disclosure to describe the action of users actively and deliberately contributing awareness information. I consider challenges and potential solutions for the design of active awareness. I compare a range of systems, each allowing users to share information about their activities at various levels of detail. I discuss one of the main challenges to active awareness: that disclosing information about activities requires some degree of effort. I discuss various representations of effort in collaborative work. These considerations reveal that there is a trade-off between the richness of awareness information and the effort required to provide this information. I propose a framework for active awareness, aimed to help designers to understand the scope and limitations of different types of intentional disclosure. I draw on the identified richness/effort trade-off to develop two types of intentional disclosure, both of which aim to facilitate the disclosure of information while reducing the effort required to do so. For both of these approaches, direct and indirect disclosure, I delineate how they differ from related approaches and define a set of design criteria that is intended to guide their implementation. I demonstrate how the framework of active awareness can be practically applied by building two proof-of-concept prototypes that implement direct and indirect disclosure respectively. AnyBiff, implementing direct disclosure, allows users to create, share and use shared representations of activities in order to express their current actions and intentions. SphereX, implementing indirect disclosure, represents shared areas of interests or working context, and links sets of activities to these representations. Lastly, I present the results of the qualitative evaluation of the two prototypes and analyse the results with regard to the extent to which they implemented their respective disclosure mechanisms and supported active awareness. Both systems were deployed and tested in real world environments. The results for AnyBiff showed that users developed a wide range of activity representations, some unanticipated, and actively used the system to disclose information. The results further highlighted a number of design considerations relating to the relationship between awareness and communication, and the role of ambiguity. The evaluation of SphereX validated the feasibility of the indirect disclosure approach. However, the study highlighted the challenges of implementing cross-application awareness support and translating the concept to users. The study resulted in design recommendations aimed to improve the implementation of future systems.

Instability of the cellular lipidome with age

The human lens nucleus is formed in utero, and from birth onwards, there appears to be no significant turnover of intracellular proteins or membrane components. Since, in adults, this region also lacks active enzymes, it offers the opportunity to examine the intrinsic stability of macromolecules under physiological conditions. Fifty seven human lenses, ranging in age from 12 to 82 years, were dissected into nucleus and cortex, and the nuclear lipids analyzed by electrospray ionization tandem mass spectrometry. In the first four decades of life, glycerophospholipids (with the exception of lysophosphatidylethanolamines) declined rapidly, such that by age 40, their content became negligible. In contrast the level of ceramides and dihydroceramides, which were undetectable prior to age 30, increased approximately 100-fold. The concentration of sphingomyelins and dihydrosphingomyelins remained unchanged over the whole life span. As a consequence of this marked alteration in composition, the properties of fiber cell membranes in the centre of young lenses are likely to be very different from those in older lenses. Interestingly, the identification of age 40 years as a time of transition in the lipid composition of the nucleus coincides with previously reported macroscopic changes in lens properties (e.g., a massive age-related increase in lens stiffness) and related pathologies such as presbyopia. The underlying reasons for the dramatic change in the lipid profile of the human lens with age are not known, but are most likely linked to the stability of some membrane lipids in a physiological environment.

Design, characterisation and in vivo testing of a new, adjustable stiffness, external fixator for the rat femur

Very little is known about the infl uence of the mechanical environment on the healing of large segmental defects. This partly reflects the lack of standardised, well characterised technologies to enable such studies. Here we report the design, construction and characterisation of a novel external fixator for use in conjunction with rat femoral defects. This device not only imposes a predetermined axial stiffness on the lesion, but also enables the stiffness to be changed during the healing process. The main frame of the fi xator consists of polyethylethylketone with titanium alloy mounting pins. The stiffness of the fi xator is determined by interchangeable connection elements of different thicknesses. Fixators were shown to stabilise 5 mm femoral defects in rats in vivo for at least 8 weeks during unrestricted cage activity. No distortion or infections, including pin infections, were noted. The healing process was simulated in vitro by inserting into a 5 mm femoral defect, materials whose Young’s moduli approximated those of the different tissues present in regenerating bone. These studies confirmed that, although the external fixator is the major determinant of axial stiffness during the early phase of healing, the regenerate within the lesion subsequently dominates this property. There is much clinical interest in altering the mechanics of the defect to enhance bone healing. Our data suggest that, if alteration of the mechanical environment is to be used to modulate the healing of large segmental defects, this needs to be performed before the tissue properties become dominant.