Sit versus stand : can sitting be accurately identified using MTI accelerometer data?

High levels of sitting have been linked with poor health outcomes. Previously a pragmatic MTI accelerometer data cut-point (100 count/min-1) has been used to estimate sitting. Data on the accuracy of this cut-point is unavailable. PURPOSE: To ascertain whether the 100 count/min-1 cut-point accurately isolates sitting from standing activities. METHODS: Participants fitted with an MTI accelerometer were observed performing a range of sitting, standing, light & moderate activities. 1-min epoch MTI data were matched to observed activities, then re-categorized as either sitting or not using the 100 count/min-1 cut-point. Self-report demographics and current physical activity were collected. Generalized estimating equation for repeated measures with a binary logistic model analyses (GEE), corrected for age, gender and BMI, were conducted to ascertain the odds of the MTI data being misclassified. RESULTS: Data were from 26 healthy subjects (8 men; 50% aged <25 years; mean BMI (SD) 22.7(3.8)m/kg2). MTI sitting and standing data mode was 0 count/min-1, with 46% of sitting activities and 21% of standing activities recording 0 count/min-1. The GEE was unable to accurately isolate sitting from standing activities using the 100 count/min-1 cut-point, since all sitting activities were incorrectly predicted as standing (p=0.05). To further explore the sensitivity of MTI data to delineate sitting from standing, the upper 95% confidence interval of the mean for the sitting activities (46 count/min-1) was used to re-categorise the data; this resulted in the GEE correctly classifying 49% of sitting, and 69% of standing activities. Using the 100 count/min-1 cut-point the data were re-categorised into a combined ‘sit/stand’ category and tested against other light activities: 88% of sit/stand and 87% of light activities were accurately predicted. Using Freedson’s moderate cut-point of 1952 count/min-1 the GEE accurately predicted 97% of light vs. 90% of moderate activities. CONCLUSION: The distributions of MTI recorded sitting and standing data overlap considerably, as such the 100 count/min -1 cut-point did not accurately isolate sitting from other static standing activities. The 100 count/min -1 cut-point more accurately predicted sit/stand vs. other movement orientated activities.

Can identified stressors be used to predict profession for mental health professionals?

A difference appears to exist between stressors reported for nurses and allied health professionals working in mental health. Prominent stressors for mental health nurses include workload, administration duties and a lack of resources. Whilst these also appear to be stressors for allied health professionals, the stressor 'professional self-doubt' has also been reported for social workers. This study aimed to examine the extent to which community mental health professionals could be identified as belonging to the nursing profession or an allied health profession based on their perceived sources of stress. Ninety-eight community mental health nurses and 85 allied health professionals working in Victoria's public mental health services completed the Mental Health Professionals Stress Scale. Discriminant analysis was utilised to test the predictive value of stressors to identify profession. The main stressors reported by nurses were workload, a lack of resources and organisational problems. For allied health professionals the highest reported stressors were workload, a lack of resources, client related difficulties and organisational problems. Mental health professionals in this study could not be identified as belonging to the nursing profession or an allied health profession based on their identified sources of stress. It could well be reflective of the shift to homogenous roles in mental health services. With this being the case, there may be benefits in implementing stress reducing strategies at an organisational level.

What the hare can teach the tortoise about make-buy strategies for radical innovations

Purpose of this paper – The purpose of this investigation is to help establish: whether or not strong relationships between suppliers and customers improve performance; and if prescriptive frameworks on outsourcing radical innovations are dependent on industry clockspeed. Design/methodology/approach – A survey of UK-based manufacturers, followed by a statistical analysis. Findings – Long-term supplier links seem not to play a role in the development of radical innovations. Moreover, industry clockspeed has no significant bearing on the success or failure of any outsourcing strategy for radically new technologies. Research limitations/implications – Literature about outsourcing in the face of radical innovation can be more confidently applied to industries of all clockspeeds. Practical implications – Prescriptions for fast clockspeed industries should be applied more broadly: all industries should maintain a high degree of vertical integration in the early days of a radical innovation. Originality/value – Prior papers had explored whether or not a company should outsource radical innovations, but none had determined if this is equally true for slow industries and fast ones. Therein lies the original contribution of this paper.

Product labelling can confer sustained increases in expected and actual satiety

Expected satiety has been shown to play a key role in decisions around meal size. Recently it has become clear that these expectations can also influence the satiety that is experienced after a food has been consumed. As such, increasing the expected and actual satiety a food product confers without increasing its caloric content is of importance. In this study we sought to determine whether this could be achieved via product labelling. Female participants (N=75) were given a 223-kcal yoghurt smoothie for lunch. In separate conditions the smoothie was labelled as a diet brand, a highly-satiating brand, or an ‘own brand’ control. Expected satiety was assessed using rating scales and a computer-based ‘method of adjustment’, both prior to consuming the smoothie and 24 hours later. Hunger and fullness were assessed at baseline, immediately after consuming the smoothie, and for a further three hours. Despite the fact that all participants consumed the same food, the smoothie branded as highly-satiating was consistently expected to deliver more satiety than the other ‘brands’; this difference was sustained 24 hours after consumption. Furthermore, post-consumption and over three hours, participants consuming this smoothie reported significantly less hunger and significantly greater fullness. These findings demonstrate that the satiety that a product confers depends in part on information that is present around the time of consumption. We suspect that this process is mediated by changes to expected satiety. These effects may potentially be utilised in the development of successful weight-management products.

Joined-up governance in Australia : how the past can inform the future

Joined-up enterprises have become a cornerstone of the institutional architecture to facilitate closer linkages within and between departments and across sectors. Some of these initiatives are now mainstream enterprises, while others struggled to gain purchase or effect. Since the future is likely to be characterized by an ongoing emphasis on joined-up initiatives, an assessment of past efforts can provide a valuable backdrop for the development of new approaches and the fine tuning of existing ones. Drawing on ten years of research data, this article tracks the ebbs and flows of joined-up or integrated practice in Queensland. In doing so, it examines the drivers for integration, preferred models, and the language used to engender change. It also assesses what has worked and why and whether integrated reform has been sustained. Based on these insights, an extended integration framework is presented, which will assist those responsible for the design, monitoring, and evaluation of joined-up processes.

Preliminary study on bridge health prediction using Dynamic Objective Oriented Bayesian Network (DOOBN)

The availability of bridges is crucial to people’s daily life and national economy. Bridge health prediction plays an important role in bridge management because maintenance optimization is implemented based on prediction results of bridge deterioration. Conventional bridge deterioration models can be categorised into two groups, namely condition states models and structural reliability models. Optimal maintenance strategy should be carried out based on both condition states and structural reliability of a bridge. However, none of existing deterioration models considers both condition states and structural reliability. This study thus proposes a Dynamic Objective Oriented Bayesian Network (DOOBN) based method to overcome the limitations of the existing methods. This methodology has the ability to act upon as a flexible unifying tool, which can integrate a variety of approaches and information for better bridge deterioration prediction. Two demonstrative case studies are conducted to preliminarily justify the feasibility of the methodology

Calcium ions promote osteogenic differentiation and mineralization of human dental pulp cells : implication for pulp capping materials

Calcium (Ca) is the main element of most pulp capping materials and plays an essential role in mineralization. Different pulp capping materials can release various concentrations of Ca ions leading to different clinical outcomes. The purpose of this study was to investigate the effects of various concentrations of Ca ions on the growth and osteogenic differentiation of human dental pulp cells (hDPCs). Different concentrations of Ca ions were added to growth culture medium and osteogenic inductive culture medium. A Cell Counting Kit-8 (CCK-8) was used to determine the proliferation of hDPCs in growth culture medium. Osteogenic differentiation and mineralization were measured by alkaline phosphatase (ALP) assay, Alizarin red S/von kossa staining, calcium content quantitative assay. The selected osteogenic differentiation markers were investigated by quantitative real-time polymerase chain reaction (qRT-PCR). Within the range of 1.8–16.2 mM, increased concentrations of Ca ions had no effect on cell proliferation, but led to changes in osteogenic differentiation. It was noted that enhanced mineralized matrix nodule formation was found in higher Ca ions concentrations; however, ALP activity and gene expression were reduced. qRT-PCR results showed a trend towards down-regulated mRNA expression of type I collagen (COL1A2) and Runx2 at elevated concentrations of Ca ions, whereas osteopontin (OPN) and osteocalcin (OCN) mRNA expression was significantly up-regulated. Ca ions content in the culture media can significantly influence the osteogenic properties of hDPCs, indicating the importance of optimizing Ca ions release from dental pulp capping materials in order to achieve desirable clinical outcomes.

Can transfer of learning be enriched by valuing knowledge transformation and co-creation? Exploring new ways to improve training design

This paper argues that a possible cause of issues with management education outcomes is the fact that most training models operate from a limited ‘transfer’ metaphor. This theoretical paper contends that by reconceptualising existing models, specifically Holton’s transfer of learning model, to incorporate multiple processes and acknowledge the importance of educator- or trainer-student interaction in co-creating knowledge, there is potential to improve training design and ultimately achieve more satisfactory training outcomes.

Leadership and the rise of the corporate psychopath: What can business schools do about the ‘snakes inside’?

Purpose: Leadership styles are reviewed and reassessed given recent research that links destructive leadership behaviours exhibited by unscrupulous executives with traits commonly identified as indicators of corporate psychopathy. Method/approach: A review of the literature describing the various theories dealing with the nature of leadership styles and the rise of interest in corporate psychopathy and destructive leadership. Implications: This paper offers a psychological perspective for future research which provides both impetus and additional support for further analysis and exploration of such leadership styles in the business environment. One distinct advantage of this extrapolation is the articulation of insights into aspects of decision making by leaders, providing further insight into the formulation of leadership development programs in organisations and courses in business schools training future leaders.

Plant programmed cell death : Can't live with it; Can't live without it

The decision of whether a cell should live or die is fundamental for the wellbeing of all organisms. Despite intense investigation into cell growth and proliferation, only recently has the essential and equally important idea that cells control/programme their own demise for proper maintenance of cellular homeostasis gained recognition. Furthermore, even though research into programmed cell death (PCD) has been an extremely active area of research there are significant gaps in our understanding of the process in plants. In this review, we discuss PCD during plant development and pathogenesis, and compare/contrast this with mammalian apoptosis. © 2008 Blackwell Publishing Ltd.

Thin bed masonry system: review and future prospects

Masonry is one of the most ancient construction materials in the World. When compared to other civil engineering practices, masonry construction is highly labour intensive, which can affect the quality and productivity adversely. With a view to improving quality and in light of the limited skilled labour in the recent times several innovative masonry construction methods such as the dry stack and the thin bed masonry have been developed. This paper focuses on the thin bed masonry system, which is used in many parts of Europe. Thin bed masonry system utilises thin layer of polymer modified mortars connecting the accurately dimensioned and/or interlockable units. This assembly process has the potential for automated panelised construction system in the industry setting or being adopted in the site using less skilled labour, without sacrificing the quality. This is because unlike the conventional masonry construction, the thin bed technology uses thinner mortar (or glue) layer which can be controlled easily through some novel methods described in this paper. Structurally, reduction in the thickness of the mortar joint has beneficial effects; for example it increases the compressive strength of masonry; in addition polymer added glue mortar enhances lateral load capacity relative to conventional masonry. This paper reviews the details of the recent research outcomes on the structural characteristics and construction practices of thin bed masonry. Finally the suitability of thin bed masonry in developing countries where masonry remains as the most common material for residential building construction is discussed.

Boardroom identities: can independence by 'cued' in directors?

Director independence is a cornerstone of fiduciary responsibility and good corporate governance. However, most directors are recruited because of the roles and networks they hold, meaning that there is an expectation that identities held by a director outside the boardroom will be used to benefit the company. While this often works well, it is acknowledged that many directors, either consciously or subconsciously, will at times allow themselves to be influenced by their other roles to the detriment of the governance process. In this paper we argue that identity theory can be used to explore the impact of ‘identity’ on corporate governance and that practical tools can be developed to actively assist directors to maintain ‘independence’ in the boardroom.

Multi-body modelling of wagon trains for crashworthiness analysis

Three-dimensional wagon train models have been developed for the crashworthiness analysis using multi-body dynamics approach. The contributions of the train size (number of wagon) to the frontal crash forces can be identified through the simulations. The effects of crash energy management (CEM) design and crash speed on train crashworthiness are examined. The CEM design can significantly improve the train crashworthiness and the consequential vehicle stability performance - reducing derailment risks.