Leadership practices of Kuwaiti Secondary School Principals for embedding ICT

Globalisation and the emergence of knowledge-based economies have forced many countries to reform their education system. The enhancement of human capital to meet modern day demands of a knowledge economy, and equip the new generation with the capacity to meet the challenges of the 21st Century has become a priority. This change is particularly necessary in economies typical of countries, such as Kuwait, which have been dependent on the exploitation of non-renewable natural resources. Transiting from a resource-based economy to an economy based on knowledge and intellectual skills poses a key challenge for an education system. Significant in the development of this new economy has been the expansion of Information Communication Technology (ICT). In education, in particular, ICT is a tool for transforming the education setting. However, transformation is only successful where there are effective change management strategies and appropriate leadership. At the school level, rapid changes have affected the role that principals take particularly in relation to leading the change process. Therefore, this study investigated the leadership practices of school principals for embedding ICT into schools. The case study assessed two Kuwaiti secondary schools; both schools had well established ICT programs. The mode of data collection used a mixed-methods design, to address the purpose of the study, namely, to examine the leadership practices of school principals when managing the change processes associated with embedding ICT in the context of Kuwait. A theoretical model of principal leadership, developed, from the literature, documented and analysed the practices of the respective school principals. The study used the following five data sources: (a) face to face interviews (with each school principal), and two focus group interviews (with five teachers and five students, from each school); (b) school documents (related to the implementation and embedding of ICT); (c) one survey (of all teachers in each school); (d) an open-ended questionnaire (of participating principals and teachers); and (e) the observation of ICT activities (PD ICT activities and instruction meetings). The study revealed a range of strategies used by the principals and aligned with the theoretical perspective. However, these strategies needed to be refined and selectively used to fit the Kuwait context, both culturally and organisationally. The principals of Schools A and B employed three key strategies to maximise the impact on the teaching staff incorporating ICT into their teaching and learning practices. These strategies were: (a) encouragement for teaching staff to implement ICT in their teaching; (b) support to meet the material and human needs of teaching staff using ICT; and (c) provision of instructions and guidance for teaching staff in how and why such behaviours and practices should be performed. The strategies provided the basic leadership practices required to construct a successful ICT embedded implementation process. Hence, a revised model of leadership that has applicability in the adoption of ICT in Kuwait was developed. The findings provide a better understanding of how a school principal’s leadership practices impact upon the ICT embedding process. Hence, the outcome of this study informs emerging countries, which are also undergoing major change related to ICT, for example, other members of the Cooperation Council for the Arab States of the Gulf. From an educational perspective, this knowledge has the potential to support ICT-based learning environments that will help educational practitioners to effectively integrate ICT into teaching and learning that will facilitate students’ ICT engagement, and prepare them for the ICT development challenges that are associated with the new economy; this is achieved by increasing students’ knowledge and performance. Further, the study offers practical strategies that have been shown to work for school principals leading ICT implementation in Kuwait. These strategies include how to deal with the shortage in schools’ budgets, and the promotion of the ICT vision, as well as developing approaches to build collaborative culture in the schools.

Broadening horizons : an emerging research agenda modelling design led innovation across secondary education

A re-examination of design education at all levels is needed to ensure global economic competitiveness and social and environmental sustainment. This paper presents an emerging research agenda modelling design led innovation approaches from the business sector to secondary education curriculum. To do this, a review of literature is provided and current knowledge gaps surrounding design education are detailed. A regional secondary school design immersion program is outlined as a future research case study using action research. A framework and recommendations for developing and delivering pedagogical approaches for 21st century skill outcomes in secondary education are briefly introduced and future research objectives are overviewed and discussed.

An integrated approach to professional development in secondary schools

Following the implementation of the National Professional Standards for Teachers, all teachers in Australia will be required to undertake 30 hours per year of professional development (PD) to maintain their registration. However, defining what constitutes effective PD is complex and often contested. This paper looks at a case study in Queensland, Australia, where a high school worked collaboratively with a university lecturer to deliver effective whole-school professional development. The lecturer acted as an external change agent, working closely with the principal and staff to build a relationship of trust and to develop a strategy for the delivery of PD on-site. This case highlights how partnerships between teachers and teacher educators combined with a willing school leader can provide positive opportunities for collaborative, sustainable, professional growth and learning.

Airborne concentration of Volatile Organic Compounds in school environment in Brisbane

Traffic emissions are considered as a major source of pollutants, particularly ultrafine particles, in the urban environment. There is an increased concern about airborne particles not only because of their environmental effects but also due to their potential adverse health effects on humans. There have been a number of studies related to the number concentration and size distribution of these particles but studies on the chemical composition of aerosols, especially in the school environment, are very limited. Mejia et. al (2011) reviewed studies on the exposure to and impact of air pollutants on school children and found that there were only a handful of studies on this topic. Therefore, the main focus of this research is on an analysis of the chemical composition of airborne particles, as well as source apportionment and the quantification of ambient concentrations of organic pollutants in the vicinity of schools, as a part of “Ultrafine Particles from Traffic Emissions on Children’s Health” (UPTECH) project. The aim of the present study was to find out the concentrations of different Volatile Organic Compounds (VOCs) in both outdoor and indoor locations from six different schools in Brisbane.

Preliminary results on the chemical composition of outdoor airborne particles at urban schools and possible implications for the air quality in classrooms

Vehicle emissions are a significant source of fine particles (Dp < 2.5 µm) in an urban environment. These fine particles have been shown to have detrimental health effects, with children thought to be more susceptible. Vehicle emissions are mainly carbonaceous in nature, and carbonaceous aerosols can be defined as either elemental carbon (EC) or organic carbon (OC). EC is a soot-like material emitted from primary sources while OC fraction is a complex mixture of hundreds of organic compounds from either primary or secondary sources (Cao et al., 2006). Therefore the ratio of OC/EC can aid in the identification of source. The purpose of this paper is to use the concentration of OC and EC in fine particles to determine the levels of vehicle emissions in schools. It is expected that this will improve the understanding of the potential exposure of children in a school environment to vehicle emissions.

Near-Wall Turbulent Pressure Diffusion Modeling and Influence in Three-Dimensional Secondary Flows

The purpose of this paper is to develop a second-moment closure with a near-wall turbulent pressure diffusion model for three-dimensional complex flows, and to evaluate the influence of the turbulent diffusion term on the prediction of detached and secondary flows. A complete turbulent diffusion model including a near-wall turbulent pressure diffusion closure for the slow part was developed based on the tensorial form of Lumley and included in a re-calibrated wall-normal-free Reynolds-stress model developed by Gerolymos and Vallet. The proposed model was validated against several one-, two, and three-dimensional complex flows.

Melt-textured YBa2Cu3O7-x wires having plate-like grains

YBCO wires which consist of well oriented plate-like fine grains are fabricated using a moving furnace to achieve higher mechanical strength. Melt-texturing experiments have been undertaken on YBCO wires with two different compositions: YBa1.5Cu2.9O7-x, and YBa1.8Cu3.0O7-x. Wires are extruded from a mixture of precursor powders (formed by a coprecipitation process) then textured by firing in a moving furnace. Size of secondary phases such as barium cuprate and copper oxide, and overall composition of the sample affect the orientation of the fine grains. At zero magnetic field, the YBa1.5Cu2.9O7-x wire shows the highest critical current density of 1,450 Acm-2 and 8,770 Acm-2 at 77K and 4.2K, respectively. At 1 T, critical current densities of 30 Acm-2 and 200 Acm-2, respectively, are obtained at 77K and 4.2K. Magnetisation curves are also obtained for one sample to evaluate critical current density using the Bean model. Analysis of the microstructure indicates that the starting composition of the green body significantly affects the achievement of grain alignment via melt-texturing processes.

A methodological approach to modelling design led innovation across secondary education : an Australian case study

Incorporating design thinking as a generic capability at a school level is needed to ensure future generations are empowered for business innovation and active citizenship. This paper describes the methodology of an investigation into modelling design led innovation approaches from the business sector to secondary education, as part of a larger study. It builds on a previously discussed research agenda by outlining the scope, significance and limitations of currently available research in this area, examining an action research methodology utilising an Australian design immersion program case study, and discussing implications and future work. It employs a triangulated approach encompassing thematic analysis of qualitative data collection from student focus groups, semi-structured convergent interviews with teachers and facilitators, and student journals. Eventual outcomes will be reviewed and analysed within the framework of a proposed innovation matrix model for educational growth, synthesising principles responding to 21st century student outcomes. It is anticipated this research will inform a successful design led secondary education innovation model, facilitating new engagement frameworks between tertiary and secondary education sectors, as well as providing new insight into the suitability of action research in prototyping social innovation in Australia.

Designing a new robust on-line secondary path modeling technique for feedforward active noise control systems

Several approaches have been introduced in the literature for active noise control (ANC) systems. Since the filtered-x least-mean-square (FxLMS) algorithm appears to be the best choice as a controller filter, researchers tend to improve performance of ANC systems by enhancing and modifying this algorithm. This paper proposes a new version of the FxLMS algorithm, as a first novelty. In many ANC applications, an on-line secondary path modeling method using white noise as a training signal is required to ensure convergence of the system. As a second novelty, this paper proposes a new approach for on-line secondary path modeling on the basis of a new variable-step-size (VSS) LMS algorithm in feed forward ANC systems. The proposed algorithm is designed so that the noise injection is stopped at the optimum point when the modeling accuracy is sufficient. In this approach, a sudden change in the secondary path during operation makes the algorithm reactivate injection of the white noise to re-adjust the secondary path estimate. Comparative simulation results shown in this paper indicate the effectiveness of the proposed approach in reducing both narrow-band and broad-band noise. In addition, the proposed ANC system is robust against sudden changes of the secondary path model.

An efficient online secondary path estimation for feedback active noise control systems

In practical cases for active noise control (ANC), the secondary path has usually a time varying behavior. For these cases, an online secondary path modeling method that uses a white noise as a training signal is required to ensure convergence of the system. The modeling accuracy and the convergence rate are increased when a white noise with a larger variance is used. However, the larger variance increases the residual noise, which decreases performance of the system and additionally causes instability problem to feedback structures. A sudden change in the secondary path leads to divergence of the online secondary path modeling filter. To overcome these problems, this paper proposes a new approach for online secondary path modeling in feedback ANC systems. The proposed algorithm uses the advantages of white noise with larger variance to model the secondary path, but the injection is stopped at the optimum point to increase performance of the algorithm and to prevent the instability effect of the white noise. In this approach, instead of continuous injection of the white noise, a sudden change in secondary path during the operation makes the algorithm to reactivate injection of the white noise to correct the secondary path estimation. In addition, the proposed method models the secondary path without the need of using off-line estimation of the secondary path. Considering the above features increases the convergence rate and modeling accuracy, which results in a high system performance. Computer simulation results shown in this paper indicate effectiveness of the proposed method.

Principals, Teachers, and Student's Perception of the Information and Communication Technology in Kuwait Secondary Schools (Rhetoric and reality)

ICT integration has been advocated to provide opportunities to improve students’ achievement and engagement through transforming the educational setting. A valuable tool that contributes in enhancing and developing students’ cognitive skills for lifelong learning, ICT integration has introduced a new educational philosophy, shifting the role of students into a more central position in the pedagogical processes. Kuwait, as with many other countries, has recently planned ICT integration to develop its citizen’s capacities. This study sought to capture the principals’, teachers’, and students’ perceptions of ICT integration in pedagogical activities, as well as how ICT is being used for learning and teaching activities in three ICT leading Kuwaiti secondary schools. Interviews with principals, teachers, and students were conducted, along with an open-ended questionnaire for the teachers, researcher observations, and document analysis. The findings revealed that ICT integration in Kuwait needed to be reinforced to accomplish the ICT integration objectives. A call for further support for teachers, and a reconsideration of the ICT integration strategies were also recommended.