A study of the effects metal residues in poly(9,9-dioctylfluorene) have on field-effect transistor device characteristics

The amount of metal residues from organometallic reagents used in preparation of poly(9,9-dioctylfluorene) by palladium catalysed Suzuki and nickel-induced Yamamoto polycondensations have been determined, and their effect upon the behaviour of the polymer in field-effect transistors (FETs) has been measured. The metal levels from material polymerised by Suzuki method were found to be much higher than from that made by the Yamamoto procedure. Simple treatment of the polymers with suitable metal trapping reagents lowered the metal levels significantly, with EDTA giving best results for nickel and triphenylphosphine for palladium. Comparison of the behaviour of FETs using polyfluorenes with varying levels of metal contamination, showed that the metal residues have little effect upon the mobility values, but often affect the degree of hysteresis, possibly acting as charge traps. Satisfactory device performances were obtained from polymer with palladium levels of 2000 μg/g suggesting that complete removal of metal residues may not be necessary for satisfactory device performance.

Synthesis, characterization and comparative OFET behaviour of indenofluorene-bithiophene and terthiophene alternating copolymers

The synthesis of alternating copolymers of tetraalkylindenofluorene with bithiophene and terthiophene using Suzuki polycondensation route is reported. We report on the optical and electrochemical properties of these copolymers. AFM analysis of the microscopic morphology of thin deposits showed that the copolymer with terthiophene units produced the more ordered films, with well-defined fibrillar structures, resulting from highly-regular dense packing due to strong π-π interchain interactions, in contrast to the amorphous bithiophene copolymer. Upon testing these materials in FETs the terthienyl copolymers displayed the higher charge mobilities among the studied compounds, with values of over 10-4 cm2 V-1 s-1 being obtained.

Synthesis, characterization and comparative study of thiophene- benzothiadiazole based donor-acceptor-donor (D-A-D) materials

The synthesis and characterization of solution processable donor-acceptor-donor (D-A-D) based conjugated molecules with varying ratios of thiophene as donor (D) and benzothiadiazole as acceptor (A) are reported. Optical, electrochemical, thermal, morphological and organic thin film transistor (OTFT) device properties of these materials were investigated. The thermal and polarized optical microscope analysis indicates that the materials having higher D/A ratios exhibit both liquid crystalline (LC) and OTFT behavior. AFM analysis of the materials having D/A ratios of 3 and 4 (3T1B and 4T1B) show well ordered structures, resulting from strong π-π interchain interactions compared to the other molecules in this study. A XRD patterns for 3T1B and 4T1B thin films also shows high crystalline ordering. Solution processed OTFTs of 3T1B and 4T1B have shown un-optimized charge carrier mobilities of 2 × 10 -2 cm 2 V -1 s -1 and 4 × 10 -3 cm 2 V -1 s -1, respectively on bare Si/SiO 2 substrate.

Nanoscale phase domain structure and associated device performance of organic solar cells based on a diketopyrrolopyrrole polymer

We investigate the blend morphology and performance of bulk heterojunction organic photovoltaic devices comprising the donor polymer, pDPP-TNT (poly{3,6-dithiophene-2-yl-2,5-di(2-octyldodecyl)-pyrrolo[3,4-c]pyrrole-1, 4-dione-alt-naphthalene}) and the fullerene acceptor, [70]PCBM ([6,6]-phenyl C71-butyric acid methyl ester). The blend morphology is heavily dependent upon the solvent system used in the fabrication of thin films. Thin films spin-coated from chloroform possess a cobblestone-like morphology, consisting of thick, round-shaped [70]PCBM-rich mounds separated by thin polymer-rich valleys. The size of the [70]PCBM domains is found to depend on the overall film thickness. Thin films spin-coated from a chloroform:dichlorobenzene mixed solvent system are smooth and consist of a network of pDPP-TNT nanofibers embedded in a [70]PCBM-rich matrix. Rinsing the films in hexane selectively removes [70]PCBM and allows for analysis of domain size and purity. It also provides a means for investigating exciton dissociation efficiency through relative photoluminescence yield measurements. Devices fabricated from chloroform solutions show much poorer performance than the devices fabricated from the mixed solvent system; this disparity in performance is seen to be more pronounced with increasing film thickness. The primary cause for the improved performance of devices fabricated from mixed solvents is attributed to the greater donor-acceptor interfacial area and resulting greater capacity for charge carrier generation.

Measurement of contact voltage drop and resistance in organic solar cells

Bulk heterojunction organic solar cells based on poly[4,7-bis(3- dodecylthiophene-2-yl) benzothiadiazole-co-benzothiadiazole] and [6,6]-phenyl C71-butyric acid methyl ester are investigated. A prominent kink is observed in the fourth quadrant of the current density-voltage (J-V) response. Annealing the active layer prior to cathode deposition eliminates the kink. The kink is attributed to an extraction barrier. The J-V response in these devices is well described by a power law. This behavior is attributed to an imbalance in charge carrier mobility. An expected photocurrent for the device displaying a kink in the J-V response is determined by fitting to a power law. The difference between the expected and measured photocurrent allows for the determination of a voltage drop within the device. Under simulated 1 sun irradiance, the peak voltage drop and contact resistance at short circuit are 0.14 V and 90 Ω, respectively. © 2012 American Institute of Physics.

A Bit-Stream based space vector modulator

Bit-Stream based control, which uses one bit wide signals to control power electronics applications, is a new approach for controller design in power electronic systems. Bit-Stream signals are inherently high frequency in nature, and as such some form of down sampling or modulating is essential to avoid excessive switching losses. This paper presents a novel three-phase space vector modulator, which is based on the Bit-Stream technique and suitable for standard three-phase inverter systems. The proposed modulator simultaneously converts a two phase reference to the three-phase domain and reduces switching frequencies to reasonable levels. The modulator consumes relatively few logic elements and does not require sector detectors, carrier oscillators or trigonometric functions. The performance of the modulator was evaluated using ModelSim. Results indicate that, subject to limits on the modulation index, the proposed modulator delivers a spread-spectrum output with total harmonic distortion comparable to standard space vector pulse width modulation techniques.

Preparation and in vitro release of zein microparticles loaded with prednisolone for oral delivery

Zein has been proposed as a polymer for targeted-drug delivery via the oral route. Zein microparticles were loaded with prednisolone and evaluated as an oral delivery system. Microparticles were formulated using phase separation. Starting quantities of zein and prednisolone, along with the agitation method and temperature were found to significantly impact drug loading and loading efficiency. Vortex mixing produced the highest drug loading and loading efficiency. Drug release was measured in simulated conditions of the stomach and small intestine using the microparticles made with the method that best improved drug loading. In simulated stomach and small intestine conditions, prednisolone release reached almost 70 over 3 and 4h, respectively. While a clinically relevant dose may be delivered using c. 100mg of zein microparticles, prednisolone release from the microparticles indicates that they may not be suited as a controlled-or targeted-delivery system.

Characterization of the tail-specific protease (Tsp) from Legionella

Bacterial tail-specific proteases (Tsps) have been attributed a wide variety of functions including intracellular virulence, cell wall morphology, proteolytic signal cascades and stress response. This study tested the hypothesis that Tsp has a key function for the transmissive form of Legionella pneumophila. A tsp mutant was generated in Legionella pneumophila 130b and the characteristics of this strain and the isogenic wild-type were examined using a range of growth and proteomic analyses. Recombinant Tsp protein was also produced and analyzed. The L. pneumophila tsp mutant showed no defect in growth on rich media or during thermo-osmotic stress conditions. In addition, no defects in cellular morphology were observed when the cells were examined using transmission electron microscopy. Purified recombinant Tsp was found to be an active protease with a narrow substrate range. Proteome analysis using iTRAQ (5% coverage of the proteome) found that, of those proteins detected, only 5 had different levels in the tsp mutant compared to the wild type. ACP (Acyl Carrier Protein), which has a key role for Legionella differentiation to the infectious form, was reduced in the tsp mutant; however, tsp(-) was able to infect and replicate inside macrophages to the same extent as the wild type. Combined, these data demonstrate that Tsp is a protease but is not essential for Legionella growth or cell infection. Thus, Tsp may have functional redundancy in Legionella.

Colloidal drug probe : Method development and validation for adhesion force measurement using Atomic Force Microscopy

This study demonstrates a novel technique of preparing drug colloid probes to determine the adhesion force between a model drug salbutamol sulphate (SS) and the surfaces of polymer microparticles to be used as carriers for the dispersion of drug particles from dry powder inhaler (DPI) formulations. Model silica probes of approximately 4 lm size, similar to a drug particle used in DPI formulations, were coated with a saturated SS solution with the aid of capillary forces acting between the silica probe and the drug solution. The developed method of ensuring a smooth and uniform layer of SS on the silica probe was validated using X-ray Photoelectron Spectroscopy (XPS) and Scanning Electron Microscopy (SEM). Using the same technique, silica microspheres pre-attached on the AFM cantilever were coated with SS. The adhesion forces between the silica probe and drug coated silica (drug probe) and polymer surfaces (hydrophilic and hydrophobic) were determined. Our experimental results showed that the technique for preparing the drug probe was robust and can be used to determine the adhesion force between hydrophilic/ hydrophobic drug probe and carrier surfaces to gain a better understanding on drug carrier adhesion forces in DPI formulations.

Haemoglobin expression in human endometrium

BACKGROUND: The general concept that haemoglobin is only a carrier protein for oxygen and carbon dioxide is challenged since recent studies have shown haemoglobin expression in non-erythroid cells and the protection of haemoglobin against oxidative and nitrosative stress. Using microarrays, we previously showed expression of haemoglobins alpha, beta, delta and gamma and the haeme metabolizing enzyme, haeme oxygenase (HO)-1 in human endometrium. METHODS: Using real-time quantitative PCR, haemoglobin alpha, beta, delta and gamma, and HO-1 mRNA levels were assessed throughout the menstrual cycle (n = 30 women). Haemoglobin and HO-1 protein levels in the human endometrium were assessed with immunohistochemistry. For steroid responsiveness, menstrual and late proliferative-phase endometrial explants were cultured for 24 h in the presence of vehicle (0.1% ethanol), estradiol (17 beta-E-2, 1 nM), progestin (Org 2058, 1 nM) or 17 beta-E-2+Org 2058 (1 nM each). RESULTS: All haemoglobins and the HO-1 were expressed in normal human endometrium. Haemoglobin mRNA and protein expression did not vary significantly during the menstrual cycle. Explant culture with Org 2058 or 17 beta-E-2+Org 2058 increased haemoglobin gamma mRNA expression (P < 0.05). HO-1 mRNA levels, and not protein levels, were significantly higher during the menstrual (M)-phase of the cycle (P < 0.05), and were down-regulated by Org 2058 in M-phase explants and by 17 beta-E-2+Org 2058 in LP-phase explants, versus control (P < 0.05). CONCLUSIONS: The haemoglobin-HO-1 system may be required to ensure adequate regulation of the bioavailability of haeme, iron and oxygen in human endometrium.

Old mastheads and new media : newspapers striving to adapt in Australia and South-east Asia

As a key element in their response to new media forcing transformations in mass media and media use, newspapers have deployed various strategies to not only establish online and mobile products, and develop healthy business plans, but to set out to be dominant portals. Their response to change was the subject of an early investigation by one of the present authors (Keshvani 2000). That was part of a set of short studies inquiring into what impact new software applications and digital convergence might have on journalism practice (Tickle and Keshvani 2000), and also looking for demonstrations of the way that innovations, technologies and protocols then under development might produce a “wireless, streamlined electronic news production process (Tickle and Keshvani 2001).” The newspaper study compared the online products of The Age in Melbourne and the Straits Times in Singapore. It provided an audit of the Singapore and Australia Information and Communications Technology (ICT) climate concentrating on the state of development of carrier networks, as a determining factor in the potential strength of the two services with their respective markets. In the outcome, contrary to initial expectations, the early cable roll-out and extensive ‘wiring’ of the city in Singapore had not produced a level of uptake of Internet services as strong as that achieved in Melbourne by more ad hoc and varied strategies. By interpretation, while news websites and online content were at an early stage of development everywhere, and much the same as one another, no determining structural imbalance existed to separate these leading media participants in Australia and South-east Asia. The present research revisits that situation, by again studying the online editions of the two large newspapers in the original study, and one other, The Courier Mail, (recognising the diversification of types of product in this field, by including it as a representative of Newscorp, now a major participant). The inquiry works through the principle of comparison. It is an exercise in qualitative, empirical research that establishes a comparison between the situation in 2000 as described in the earlier work, and the situation in 2014, after a decade of intense development in digital technology affecting the media industries. It is in that sense a follow-up study on the earlier work, although this time giving emphasis to content and style of the actual products as experienced by their users. It compares the online and print editions of each of these three newspapers; then the three mastheads as print and online entities, among themselves; and finally it compares one against the other two, as representing a South-east Asian model and Australian models. This exercise is accompanied by a review of literature on the developments in ICT affecting media production and media organisations, to establish the changed context. The new study of the online editions is conducted as a systematic appraisal of the first level, or principal screens, of the three publications, over the course of six days (10-15.2.14 inclusive). For this, categories for analysis were made, through conducting a preliminary examination of the products over three days in the week before. That process identified significant elements of media production, such as: variegated sourcing of materials; randomness in the presentation of items; differential production values among media platforms considered, whether text, video or stills images; the occasional repurposing and repackaging of top news stories of the day and the presence of standard news values – once again drawn out of the trial ‘bundle’ of journalistic items. Reduced in this way the online artefacts become comparable with the companion print editions from the same days. The categories devised and then used in the appraisal of the online products have been adapted to print, to give the closest match of sets of variables. This device, to study the two sets of publications on like standards -- essentially production values and news values—has enabled the comparisons to be made. This comparing of the online and print editions of each of the three publications was set up as up the first step in the investigation. In recognition of the nature of the artefacts, as ones that carry very diverse information by subject and level of depth, and involve heavy creative investment in the formulation and presentation of the information; the assessment also includes an open section for interpreting and commenting on main points of comparison. This takes the form of a field for text, for the insertion of notes, in the table employed for summarising the features of each product, for each day. When the sets of comparisons as outlined above are noted, the process then becomes interpretative, guided by the notion of change. In the context of changing media technology and publication processes, what substantive alterations have taken place, in the overall effort of news organisations in the print and online fields since 2001; and in their print and online products separately? Have they diverged or continued along similar lines? The remaining task is to begin to make inferences from that. Will the examination of findings enforce the proposition that a review of the earlier study, and a forensic review of new models, does provide evidence of the character and content of change --especially change in journalistic products and practice? Will it permit an authoritative description on of the essentials of such change in products and practice? Will it permit generalisation, and provide a reliable base for discussion of the implications of change, and future prospects? Preliminary observations suggest a more dynamic and diversified product has been developed in Singapore, well themed, obviously sustained by public commitment and habituation to diversified online and mobile media services. The Australian products suggest a concentrated corporate and journalistic effort and deployment of resources, with a strong market focus, but less settled and ordered, and showing signs of limitations imposed by the delay in establishing a uniform, large broadband network. The scope of the study is limited. It is intended to test, and take advantage of the original study as evidentiary material from the early days of newspaper companies’ experimentation with online formats. Both are small studies. The key opportunity for discovery lies in the ‘time capsule’ factor; the availability of well-gathered and processed information on major newspaper company production, at the threshold of a transformational decade of change in their industry. The comparison stands to identify key changes. It should also be useful as a reference for further inquiries of the same kind that might be made, and for monitoring of the situation in regard to newspaper portals on line, into the future.

Design of high mobility DPP-based polymer semiconductors for organic thin film transistors

π-Conjugated polymers are the most promising semiconductor materials to enable printed organic thin film transistors (OTFTs) due to their excellent solution processability and mechanical robustness. However, solution-processed polymer semiconductors have shown poor charge transport properties mainly originated from the disordered polymer chain packing in the solid state as compared to the thermally evaporated small molecular organic semiconductors. The low charge carrier mobility, typically < 0.1 cm2 /V.s, of polymer semiconductors poses a challenge for most intended applications such as displays and radio-frequency identification (RFID) tags. Here we present our recent results on the dike topyrrolopyrrole (DPP)-based polymers and demonstrate that when DPP is combined with appropriate electron donating moieties such as thiophene and thienothiophene, very high charge carrier mobility values of ~1 cm2/V.s could be achieved.

Bio-hydrogen production from food waste through anaerobic fermentation

In order to protect our planet and ourselves from the adverse effects of excessive CO2 emissions and to prevent an imminent non-renewable fossil fuel shortage and energy crisis, there is a need to transform our current ‘fossil fuel dependent’ energy systems to new, clean, renewable energy sources. The world has recognized hydrogen as an energy carrier that complies with all the environmental quality and energy security, demands. This research aimed at producing hydrogen through anaerobic fermentation, using food waste as the substrate. Four food waste substrates were used: Rice, fish, vegetable and their mixture. Bio-hydrogen production was performed in lab scale reactors, using 250 mL serum bottles. The food waste was first mixed with the anaerobic sewage sludge and incubated at 37°C for 31 days (acclimatization). The anaerobic sewage sludge was then heat treated at 80°C for 15 min. The experiment was conducted at an initial pH of 5.5 and temperatures of 27, 35 and 55°C. The maximum cumulative hydrogen produced by rice, fish, vegetable and mixed food waste substrates were highest at 37°C (Rice =26.97±0.76 mL, fish = 89.70±1.25 mL, vegetable = 42.00±1.76 mL, mixed = 108.90±1.42 mL). A comparative study of acclimatized (the different food waste substrates were mixed with anaerobic sewage sludge and incubated at 37°C for 31days) and non-acclimatized food waste substrate (food waste that was not incubated with anaerobic sewage sludge) showed that acclimatized food waste substrate enhanced bio-hydrogen production by 90 - 100%.

Surface engineering of reduced graphene oxide for controllable ambipolar flash memories

Tunable charge-trapping behaviors including unipolar charge trapping of one type of charge carrier and ambipolar trapping of both electrons and holes in a complementary manner is highly desirable for low power consumption multibit flash memory design. Here, we adopt a strategy of tuning the Fermi level of reduced graphene oxide (rGO) through self-assembled monolayer (SAM) functionalization and form p-type and n-type doped rGO with a wide range of manipulation on work function. The functionalized rGO can act as charge-trapping layer in ambipolar flash memories, and a dramatic transition of charging behavior from unipolar trapping of electrons to ambipolar trapping and eventually to unipolar trapping of holes was achieved. Adjustable hole/electron injection barriers induce controllable Vth shift in the memory transistor after programming operation. Finally, we transfer the ambipolar memory on flexible substrates and study their charge-trapping properties at various bending cycles. The SAM-functionalized rGO can be a promising candidate for next-generation nonvolatile memories.