A comparison between bagasse and water efficient alternatives using KOH/AQ pulping

Numerous crops grow in sugar regions that have the potential to increase the amount of biomass available to a small bagasse-based pulp factory. Arundo donax and Sorghum offer unique advantages to farmers compared to other agricultural crops. Sorghum bicolour requires only 1/3 of the water of sugarcane. Arundo donax is a very high yield crop, it can also grow with little water but it has the further advantage in that it is also highly stress tolerant, making it suitable for land which is unsuited to other crops. Pulps produced from these crops were benchmarked against sugarcane bagasse pulp. Arundo, sorghum and bagasse were pulped using KOH and anthraquinone to 20 Kappa number so as to produce a bleachable pulp which is suitable for making photocopier paper and tissue products. The unbleached sorghum pulp has better tensile strength properties than the unbleached Arundo pulp (43.8 Nm/g compared to 21.4 Nm/g) and the bleached sorghum pulp tensile strength was similar to bagasse (28.4 Nm/g). At 20 Kappa number, sorghum pulp had acceptable yield for a non-wood fibre (45% c.f. 55% for bagasse), Arundo donax pulp had low tensile strength, and relatively low yield (38.7%), even for an agricultural fibre and required severe cooking conditions to achieve similar delignification to sugarcane bagasse or sorghum. Sorghum and Arundo donax produced thicker handsheets than bagasse (>160 µm c.f. 122 µm for bagasse). In preliminary experiments sorghum and bagasse responded slightly better to Totally Chlorine Free peroxide bleaching (QPP), although none achieved a satisfactory brightness level and further improvement would be required to produce a bleached pulp.

A review on the production of levulinic acid and furanics from sugars

Sugarcane products represent an abundant and relatively low cost carbon resource that can be utilised to produce chemical intermediates such as levulinic acid and furanics. These chemicals can be easily upgraded to commodity and specialty chemicals and biofuels by high yielding and well established technologies. However, there are challenges and technical hurdles that need to be overcome before these chemical intermediates can be cost-effectively produced in commercial quantities. The paper reviews production of levulinic acid and furanics from sugars by homogeneous mineral acid catalysts, and reports on preliminary studies on the production of these compounds with environmentally friendly biodegradable sulfonic acids. The yields (>50% of theoretical) of levulinic acid, formic acid and furfural obtained with these organic acids are comparable to that of sulphuric acid currently used for their production.

Sweet sorghum : opportunities for a new, renewable fuel and food industry in Australia

Sweet sorghum is receiving significant global interest as an agro-industrial crop because of its capacity to co-produce energy, food, and feed products in integrated biorefineries. This report assesses the opportunities to develop a sweet sorghum industry in Australia, reports on research demonstrating the production of energy, food, and feed products, and assesses the potential economic and sustainability benefits of sweet sorghum biorefineries in the Australian context.

Investigating early childhood education for sustainability : insights from history and literature

Seemingly straightforward tasks often have a way of becoming complex. This was the case for our guest editorial team charged with creating Early Childhood Australia’s Best of Sustainability publication drawn from the the Australasian Journal of Early Childhood and Every Child. The complexities we encountered ranged from the varied terminologies and understandings of constructs such as education for sustainable development, environmental education and education for sustainability, through to the fundamental lack of published research on which to draw as the basis for a special issue. It is timely to explore these complexities as we face the global challenges of The Critical Decade (DCCEE, 2011) including rising sea levels, extreme weather events and food security. At a local level, the early childhood field in Australia is seeking to interpret sustainability with systemic support from the National Quality Standards(NQS) (ACECQA, 2011), while elsewhere environmental/sustainability education is encouraged through national curricula documents (for example, Singapore Ministry of Education, 2008; Swedish National Agency for Education,2010; Ministry of Education of Korea, 2011). Both The Critical Decade and the NQS provide imperatives to drive early childhood education’s engagement with sustainability. In other words, sustainability in early childhood education is no longer optional, but essential (Elliott, 2010). While some twenty years of advocacy has led to this somewhat subdued celebratory position, in this publication we do recognise the historical contexts that have led to early childhood education for sustainability (ECEfS), as we (Elliott & Davis) phrase it, becoming almost ‘mainstream not marginal’ (Davis, 1999)— a stitching together of the isolated ‘patches of green’, first identified a decade ago by Elliott (NSW EPA, 2003). Here we weave together, through these articles, a story of the evolving history of ECEfS from our particular perspective. In so doing, we also acknowledge that there are other perspectives or ‘paths’ for this field as identified by Edwards and Cutter-McKenzie in their concluding paper to this compilation.

Web mediated market interactions and enterprise software

With increased consolidation and a few large vendors dominating the market, how can software vendors distinguish themselves in order to maintain profitability and gain market share? Increasingly customers are becoming more proactive in selecting a vendor and a product, drawing upon various publications, market surveys, mailing lists, and, of course, other users. In particular, though, a company's Web site is the obvious place to begin information gathering. In sum, it may seem that the days of the uninformed customer prepared to be "sold to" are potentially all but gone.

Achieving enterprise integration through software customization : part I-evidence from the field

Achieving business and IT integration is strategic goal for many organisations – it has almost become the ‘Holy Grail’ of organisational success. In this environment Enterprise Resource Planning (ERP) packages have become the defacto option for addressing this issue. Integration has come to mean adopting ERP, through configuration and without customization, but this all or nothing approach has proved difficult for many organisations. In part 1 of a 2 part update we provide evidence from the field that suggests that whilst costly, if managed appropriately, customization can have value in aiding organisational integration efforts. In part 2, we discuss in more detail the benefits and pitfalls involved in enacting a non-standard based integration strategy.

Achieving enterprise integration through software customization : part II-enacting the strategy

In part 1 of this update, we put forward the argument that integration in ERP based environments can be achieved in ways other than adopting a software configuration only approach. We drew on evidence from two large ERP implementations to show how, despite the cost implications, some customization, if carefully managed, could prove helpful. In this, the final part of the update, we discuss the benefits, and potential pitfalls, involved in enacting a non-standard based integration strategy. This requires attention to a) broadening the integration definition; b) bringing legacy practices forward and c) developing a customization based integration strategy.

Milling and diffusion extraction : theory and practice

AN ENGINEERING Workshop was held from 21 to 24 November 2006 in Veracruz, Mexico. Forty delegates from 12 countries attended the workshop on theory and practice of milling and diffusion extraction. This report provides a general overview of activities undertaken during that workshop which consisted of five technical sessions over two days with presentations and discussions plus two days of field and factory visits. Topics covered during the technical sessions included: power transmissions, cane preparation, diffusers, mills, and a comparison of milling and diffusion.

Issues associated with using trash as a cogeneration fuel

Considerable work has been undertaken to determine an economical process to provide sugarcane trash as a fuel for cogeneration. This paper reviews efforts to provide that trash fuel by harvesting, transporting and processing the trash with the cane. Harvesting trash with the cane has the advantage that cane that would otherwise be lost by extracting it with the trash is captured and sugar can be produced from that cane. Transporting trash with the cane significantly reduces the bulk density of the cane, requiring substantial changes and costs to cane transport. Shredding the trash at the harvester and compacting the cane in the bin prior to transport are possible methods to increase the bulk density but both have considerable cost. Processing trash through the sugar factory with the cane significantly reduces sugar recovery and sugar quality. Although considerable knowledge has been gained of these effects and further analysis has provided insights into their causes, much more work is required before whole crop harvesting and transport is an economically viable means of trash recovery.

Evolution of sexual segregation in mammalian herbivores: kangaroos as marsupial models

Sexual segregation is best known in sexually dimorphic ungulates. Many hypotheses have been proposed to explain the evolution of sexual segregation in ungulates, but all are reducible to the influence of two factors: body size and sex-specific reproductive strategy. Definitive tests of these hypotheses are lacking in ungulates because these factors are confounded, all males being somewhat larger than females. Kangaroos represent a parallel radiation of terrestrial herbivores, but their populations are composed of a spectrum of adult body sizes, ranging from small males the same size as females to large males more than twice the size. We exploited this heteromorphism to assess the independent influences of size and sex in these ungulate analogues. We conducted a preliminary study of western grey kangaroos (Macropus fuliginosus) in north-western Victoria, Australia. Adult males predominately occupied grassland habitat, whereas females occurred mostly in lakebed, woodland and shrubland. Single-sex groups occurred more often than expected during the non-mating season. The diet of large males had the highest proportion of grass, and females had the least. These initial results indicate that both size and sex influence segregation in this species, confirming the worth of kangaroos as marsupial models for research into the evolution of sexual segregation.

Green-fluorescent protein facilitates rapid in vivo detection of genetically transformed plant cells

Early detection of plant transformation events is necessary for the rapid establishment and optimization of plant transformation protocols. We have assessed modified versions of the green fluorescent protein (GFP) from Aequorea victoria as early reporters of plant transformation using a dissecting fluorescence microscope with appropriate filters. Gfp-expressing cells from four different plant species (sugarcane, maize, lettuce, and tobacco) were readily distinguished, following either Agrobacterium-mediated or particle bombardment-mediated transformation. The identification of gfp-expressing sugarcane cells allowed for the elimination of a high proportion of non-expressing explants and also enabled visual selection of dividing transgenic cells, an early step in the generation of transgenic organisms. The recovery of transgenic cell clusters was streamlined by the ability to visualize gfp-expressing tissues in vitro.

A novel population balance model for the dilute acid hydrolysis of hemicellulose

Acid hydrolysis is a popular pretreatment for removing hemicellulose from lignocelluloses in order to produce a digestible substrate for enzymatic saccharification. In this work, a novel model for the dilute acid hydrolysis of hemicellulose within sugarcane bagasse is presented and calibrated against experimental oligomer profiles. The efficacy of mathematical models as hydrolysis yield predictors and as vehicles for investigating the mechanisms of acid hydrolysis is also examined. Experimental xylose, oligomer (degree of polymerisation 2 to 6) and furfural yield profiles were obtained for bagasse under dilute acid hydrolysis conditions at temperatures ranging from 110C to 170C. Population balance kinetics, diffusion and porosity evolution were incorporated into a mathematical model of the acid hydrolysis of sugarcane bagasse. This model was able to produce a good fit to experimental xylose yield data with only three unknown kinetic parameters ka, kb and kd. However, fitting this same model to an expanded data set of oligomeric and furfural yield profiles did not successfully reproduce the experimental results. It was found that a ``hard-to-hydrolyse'' parameter, $\alpha$, was required in the model to ensure reproducibility of the experimental oligomer profiles at 110C, 125C and 140C. The parameters obtained through the fitting exercises at lower temperatures were able to be used to predict the oligomer profiles at 155C and 170C with promising results. The interpretation of kinetic parameters obtained by fitting a model to only a single set of data may be ambiguous. Although these parameters may correctly reproduce the data, they may not be indicative of the actual rate parameters, unless some care has been taken to ensure that the model describes the true mechanisms of acid hydrolysis. It is possible to challenge the robustness of the model by expanding the experimental data set and hence limiting the parameter space for the fitting parameters. The novel combination of ``hard-to-hydrolyse'' and population balance dynamics in the model presented here appears to stand up to such rigorous fitting constraints.

Developing starch-based polymer composites

This project aim was to replace petroleum-based plastic packaging materials that pollute the environment, with biodegradable starch-based polymer composites. It was demonstrated that untreated sugar cane bagasse microfibres and unbleached nanofibres significantly improved the physical, mechanical and chemical properties of starch films, while thermal extrusion of starch with alcohol improved the stiffness and the addition of aconitic acid cross-linked the film making it moisture resistant and extensible.