Modal parameters identification of heavy-haul railway RC bridges: Experience acquired

Traditionally, it is not easy to carry out tests to identify modal parameters from existing railway bridges because of the testing conditions and complicated nature of civil structures. A six year (2007-2012) research program was conducted to monitor a group of 25 railway bridges. One of the tasks was to devise guidelines for identifying their modal parameters. This paper presents the experience acquired from such identification. The modal analysis of four representative bridges of this group is reported, which include B5, B15, B20 and B58A, crossing the Carajás railway in northern Brazil using three different excitations sources: drop weight, free vibration after train passage, and ambient conditions. To extract the dynamic parameters from the recorded data, Stochastic Subspace Identification and Frequency Domain Decomposition methods were used. Finite-element models were constructed to facilitate the dynamic measurements. The results show good agreement between the measured and computed natural frequencies and mode shapes. The findings provide some guidelines on methods of excitation, record length of time, methods of modal analysis including the use of projected channel and harmonic detection, helping researchers and maintenance teams obtain good dynamic characteristics from measurement data.

Effect of different surface profile on wear of rail steel (AS1085.1) used in Australian heavy-haul railways

The extreme diversity of conditions acting on railways necessitates a variety of experimental approaches to study the critical wear mechanisms that present themselves at the contact interface. This work investigates the effects of contact pressure and geometry in rolling-contact wear tests by using discs with different radii of curvature to simulate the varying contact conditions that may be typically found in the field. It is commonly adapted to line contact interface as it has constant contact pressure. But practical scenario of the rail wheel interface, the contact area increase and contact pressure change as tracks worn off. The tests were conducted without any significant amount of traction, but micro slip was still observed due to contact deformation. Moreover, variation of contact pressure was observed due to contact patch elongation and diameter reduction. Rolling contact fatigue, adhesive and sliding wear were observed on the curved contact interface. The development of different wear regimes and material removal phenomena were analysed using microscopic images in order to broaden the understanding of the wear mechanisms occurring in the rail-wheel contact.

Protective legal regulation for home-based workers in Australian textile, clothing and footwear supply chains

Supply chain outsourcing has posed problems for conventional labour regulation, which focuses on employers contracting directly with workers, particularly employees. These difficulties have been exacerbated by the traditional trifurcated approach to regulation of pay and conditions, work health and safety and workers’ compensation. This paper analyses the parallel interaction of two legal developments within the Australian textile, clothing and footwear industry. The first is mandatory contractual tracking mechanisms within state and federal labour laws and the second is the duties imposed by the harmonised Work Health and Safety Acts. Their combined effect has created an innovative, fully enforceable and integrated regulatory framework for the textile, clothing and footwear industry and, it is argued, other supply chains in different industry contexts. This paper highlights how regulatory solutions can address adverse issues for workers at the bottom of contractual networks, such as fissured workplaces and capital fragmentation, by enabling regulators to harness the commercial power of business controllers at the apex to ensure compliance throughout the entire chain.

Anatomy of a trending topic : Methods for the visualisation of retweet chains [Anatomie eines Trending Topics: Methoden zur Visualisierung von Retweet-Ketten]

Twitter and other social networking sites play an ever more present role in the spread of current events. The dynamics of information dissemination through digital network structures are still relatively unexplored, however. At what time an issue is taken up by whom? Who forwards a message when to whom else? What role do individual communication participants, existing digital communities or the technical foundations of each network platform play in the spread of news? In this chapter we discuss, using the example of a video on a current sociopolitical issue in Australia that was shared on Twitter, a number of new methods for the dynamic visualisation and analysis of communication processes. Our method combines temporal and spatial analytical approaches and provides new insights into the spread of news in digital networks. [Social media dienen immer häufger als Disseminationsmechanismen für Medieninhalte. Auf Twitter ermöglicht besonders die Retweet-Funktion den schnellen und weitläufgen Transfer von Nachrichten. In diesem Beitrag etablieren neue methodische Ansätze zur Erfassung, Visualisierung und Analyse von Retweet-Ketten. Insbesondere heben wir hervor, wie bestehende Netzwerkanalysemethoden ergänzt werden können, um den Ablauf der Weiterleitung sowohl temporal als auch spatial zu erfassen. Unsere Fallstudie demonstriert die verbreitung des videoclips einer am 9. Oktober 2012 spontan gehaltenen Wutrede der australischen Premierministerin Julia Gillard, in der sie Oppositionsführer Tony Abbott als Frauenhasser brandmarkte. Durch die Erfassung von Hintergrunddaten zu den jeweiligen NutzerInnen, die sich an der Weiterleitung des Videoclips beteiligten, erstellen wir ein detailliertes Bild des Disseminationsablaufs im vorliegenden Fall. So lassen sich die wichtigsten AkteurInnen und der Ablauf der Weiterleitung darstellen und analysieren. Daraus entstehen Einblicke in die allgemeinen verbreitungsmuster von Nachrichten auf Twitter].

Experimental investigation of wear modes of hardened rail material used in Australian heavy-haul railways

This work investigates the effects of contact pressure and geometry in rolling-contact wear tests by using discs with different radii of curvature to simulate the varying contact conditions that may be typically found in the field. The tests were conducted without any significant amount of traction, but micro slip was still observed due to contact deformation. Moreover, variation of contact pressure was observed due to contact patch elongation and diameter reduction. Rolling contact fatigue, adhesive and sliding wear were observed on the curved contact interface. The development of different wear regimes and material removal phenomena were analyzed using microscopic images in order to broaden the understanding of the wear mechanisms occurring in the rail-wheel contact.

Two monoclonal antibodies to precisely the same epitope of type ii collagen select non-crossreactive phage clones by phage display: Implications for autoimmunity and molecular mimicry

Two monoclonal antibodies (mAb) CB268 and CII-C1 to type II collagen (CII) react with precisely the same conformational epitope constituted by the residues ARGLT on the three chains of the CII triple helix. The antibodies share structural similarity, with most differences in the complementarity determining region 3 of the heavy chain (HCDR3). The fine reactivity of these mAbs was investigated by screening two nonameric phage-displayed random peptide libraries. For each mAb, there were phage clones (phagotopes) that reacted strongly by ELISA only with the selecting mAb, and inhibited binding to CII only for that mAb, not the alternate mAb. Nonetheless, a synthetic peptide RRLPFGSQM corresponding to an insert from a highly reactive CII-C1-selected phagotope, which was unreactive (and non-inhibitory) with CB268, inhibited the reactivity of CB268 with CII. Most phage-displayed peptides contained a motif in the first part of the molecule that consisted of two basic residues adjacent to at least one hydrophobic residue (e.g. RRL or LRR), but the second portion of the peptides differed for the two mAbs. We predict that conserved CDR sequences interact with the basic-basic-hydrophobic motif, whereas non-conserved amino acids in the binding sites (especially HCDR3) interact with unique peptide sequences and limit cross-reactivity. The observation that two mAbs can react identically with a single epitope on one antigen (CII), but show no cross-reactivity when tested against a second (phagotope) indicates that microorganisms could exhibit mimics capable of initiating autoimmunity without this being evident from conventional assays.

Facing the wave of change: Stakeholder perspectives on climate adaptation for Australian seafood supply chains

Climate change is one of the most important issues confronting the sustainable supply of seafood, with projections suggesting major effects on wild and farmed fisheries worldwide. While climate change has been a consideration for Australian fisheries and aquaculture management, emphasis in both research and adaptation effort has been at the production end of supply chains—impacts further along the chain have been overlooked to date. A holistic biophysical and socio-economic system view of seafood industries, as represented by end-to-end supply chains, may lead to an additional set of options in the face of climate change, thus maximizing opportunities for improved fishery profitability, while also reducing the potential for maladaptation. In this paper, we explore Australian seafood industry stakeholder perspectives on potential options for adaptation along seafood supply chains based on future potential scenarios. Stakeholders, representing wild capture and aquaculture industries, provided a range of actions targeting different stages of the supply chain. Overall, proposed strategies were predominantly related to the production end of the supply chain, suggesting that greater attention in developing adaptation options is needed at post-production stages. However, there are chain-wide adaptation strategies that can present win–win scenarios, where commercial objectives beyond adaptation can also be addressed alongside direct or indirect impacts of climate. Likewise, certain adaptation strategies in place at one stage of the chain may have varying implications on other stages of the chain. These findings represent an important step in understanding the role of supply chains in effective adaptation of fisheries and aquaculture industries to climate change.

Socio-cultural influences on vehicle defects in the Omani heavy vehicle industry

With recent economic growth in Oman there is increased use of heavy vehicles, presenting an increase in heavy vehicle crashes, associated fatalities and injuries. Vehicle defects cause a significant number of heavy vehicle crashes in Oman and increase the likelihood of fatalities. The aim of this study is to explore factors contributing to driving with vehicle defects in the Omani heavy vehicle industry. A series of qualitative participants observations were conducted in Oman with 49 drivers. These observations also involved discussion and interviews with drivers. The observations occurred at two road-side locations where heavy vehicle drivers gather for eating, resting, vehicle check-up, etc. Data collection was conducted over a three week period. The data was analysed using thematic analysis. A broad number of factors were identified as contributing to the driving of vehicles with defects. Participants indicated that tyres and vehicle mechanical faults were a common issue in the heavy vehicle industry. Participants regularly reported that their companies use cheap, poor quality standards parts and conducted minimal maintenance. Drivers also indicated that they felt powerless to resist company pressure to drive vehicles with known faults. In addition, drivers reported that traffic police were generally in effective and lacked skill to appropriately conduct roadside inspection on trucks. Further, participants stated that it was possible for companies to avoid being fined during annual or roadside vehicle inspections if members of the company knew the traffic police officer conducting the inspection. Moreover, fines issued by police are generally directed to the individual driver rather than being applied to the company, thus providing no incentive for companies to address vehicle faults. The implications of the findings are discussed.

Safety culture and speeding in the Australian heavy vehicle industry

Inappropriate speed and speeding are among the highest causes of crashes in the heavy vehicle industry. Truck drivers are subjected to a broad range of influences on their behaviour including industrial pressures, company monitoring and police enforcement. Further, drivers have a high level of autonomy over their own behaviour. As such it is important to understand how these external influences interact with commonly shared beliefs, attitudes and values of heavy vehicle drivers to influence their behaviour. The present study uses a re-conceptualisation of safety culture to explore the behaviours of driving at an inappropriate speed and speeding in the heavy vehicle industry. A series of case studies, consisting of interviews and ride-along observations, were conducted with three transport organisations to explore the effect of culture on safety in the heavy vehicle industry. Results relevant to inappropriate speed are reported and discussed. It was found that organisational management through monitoring, enforcement and payment, police enforcement, customer standards and vehicle design factors could all reduce the likelihood of driving at inappropriate speeds under some circumstances. However, due to weaknesses in the ability to accurately monitor appropriate speed, this behaviour was primarily influenced by cultural beliefs, attitudes and values. Truck drivers had a tendency to view speeding as relatively safe, had a desire to speed to save time and increase personal income, and thus often attempted to speed without detection. When drivers saw speeding as dangerous, however, they were more likely to drive safely. Implications for intervention are discussed.

Heavy metals in the sediments of Northern Moreton Bay, Queensland, Australia

This project was the first comprehensive assessment of heavy metals to be conducted in the sediments of Northern Moreton Bay since the 1970s and found that shipping and shipping related activities contributed significantly to the level of sediment contamination in the area. The study was also used to develop and test new methods of assessing heavy metal sediment quality.

Heavy haul sleeper design: A rational cost-saving method

Heavy haul railway lines are important and expensive items of infrastructure operating in an environment which is increasingly focussed on risk-based management and constrained profit margins. It is vital that costs are minimised but also that infrastructure satisfies failure criteria and standards of reliability which account for the random nature of wheel-rail forces and of the properties of the materials in the track. In Australia and the USA, concrete railway sleepers/ties are still designed using methods which the rest of the civil engineering world discarded decades ago in favour of the more rational, more economical and probabilistically based, limit states design (LSD) concept. This paper describes a LSD method for concrete sleepers which is based on (a) billions of measurements over many years of the real, random wheel-rail forces on heavy haul lines, and (b) the true capacity of sleepers. The essential principles on which the new method is based are similar to current, widely used LSD-based standards for concrete structures. The paper proposes and describes four limit states which a sleeper must satisfy, namely: strength; operations; serviceability; and fatigue. The method has been applied commercially to two new major heavy haul lines in Australia, where it has saved clients millions of dollars in capital expenditure.

Experimental investigation of the effects of oxygenated fuels on exhaust emissions in a heavy duty diesel engine

Physical and chemical properties of biofuels vary among various feedstocks and their subsequent conversions to fuels. The biofuels contain various amounts of oxygen, and this has a significant influence on exhaust emission. This oxygen content has been considered in order to investigate its effect on diesel engine exhaust emissions. The experiments have been conducted with a heavy duty diesel engine and various oxygenated fuels. It is found that the amount of oxygen in the fuel has a high level of influence on its exhaust emissions, and this provides agreement with diesel emissions results such as PN reduction. By increasing the amount of oxygen in the blend (by adding more biofuel), the particulate number (PN) is reduced and NOx increases gradually. However, the variation of PN and NOx are not similar for waste cooking biodiesel (WCBD) and butanol blend, even though their oxygen content are the same in the blends. This is due to the source of the biofuel and their internal chemistry.

Regulating supply chains to protect road transport workers: An early assessment of the road safety remuneration tribunal

The Road Safety Remuneration Act 2012 (Cth) (the Act) explicitly enables the Road Safety Remuneration Tribunal to make orders that can impose binding requirements on all the participants in the road transport supply chain, including consignors and consignees at the apex the chain, for the pay and safety of both employee and independent contractor drivers. The tribunal is also specifically empowered to make enforceable orders to reduce or remove remuneration related incentives and pressures that contribute to unsafe work practices in the road transport industry. Recently the tribunal handed down its first order. The article considers whether, and the degree to which, the tribunal has been willing to exercise its explicit power to impose enforceable obligations on consignors and consignees — such as large supermarket chains — at the apex of road transport supply chains. It examines the substance and extent of the obligations imposed by the tribunal, including whether the tribunal has exercised the full range of powers vested in it by the Act. We contend that the tribunal’s first order primarily imposes obligations on direct work providers and drivers without making large, powerful consignors and consignees substantively responsible for driver pay and safety. We argue that the tribunal’s first order could have more comprehensively fulfilled the objectives of the Act by more directly addressing the root causes of low pay and poor safety in the road transport industry.

A new family of multivariate heavy-tailed distributions with variable marginal amounts of tailweight: Application to robust clustering

We propose a family of multivariate heavy-tailed distributions that allow variable marginal amounts of tailweight. The originality comes from introducing multidimensional instead of univariate scale variables for the mixture of scaled Gaussian family of distributions. In contrast to most existing approaches, the derived distributions can account for a variety of shapes and have a simple tractable form with a closed-form probability density function whatever the dimension. We examine a number of properties of these distributions and illustrate them in the particular case of Pearson type VII and t tails. For these latter cases, we provide maximum likelihood estimation of the parameters and illustrate their modelling flexibility on simulated and real data clustering examples.

Rail power conditioner technology in Australian Heavy Haul Railway: A case study

Aurizon, Australia's largest freight railway operator, is investigating the use of Rail Power Conditioner (RPC) technology for load balancing, reactive power compensation and harmonic filtering. The new technology has the capability of replacing Static VAr Compensators (SVC) and Harmonic Filters, and is expected to have a significant impact on the overall costs of railway electrification. This paper presents the theoretical analysis of the real and reactive power flows in an RPC used to balance active powers in an existing V/V feeder station. This informed an RPC feasibility study undertaken at four existing Aurizon's feeder stations with V/V connected transformers.