Fire design rules for load bearing cold-formed steel frame walls exposed to realistic design fire curves

Light gauge Steel Frame (LSF) walls are extensively used in the building industry due to the many advantages they provide over other wall systems. Although LSF walls have been used widely, fire design of LSF walls is based on approximate prescriptive methods based on limited fire tests. Also these fire tests were conducted using the standard fire curve [1] and the applicability of available design rules to realistic design fire curves has not been verified. This paper investigates the accuracy of existing fire design rules in the current cold-formed steel standards and the modifications proposed by previous researchers. Of these the recently developed design rules by Gunalan and Mahendran [2] based on Eurocode 3 Part 1.3 [3] and AS/NZS 4600 [4] for standard fire exposure [1] were investigated in detail to determine their applicability to predict the axial compression strengths and fire resistance ratings of LSF walls exposed to realistic design fire curves. This paper also presents the fire performance results of LSF walls exposed to a range of realistic fire curves obtained using a finite element analysis based parametric study. The results from the parametric study were used to develop a simplified design method based on the critical hot flange temperature to predict the fire resistance ratings of LSF walls exposed to realistic fire curves. Finally, the stud failure times (fire resistance rating) obtained from the fire design rules and the simplified design method were compared with parametric study results for LSF walls lined with single and double plasterboards, and externally insulated with rock fibres under realistic fire curves.

Global rules on conflict-of-laws matters in international insolvency law cases: An Australian perspective

The 2012 Report “Transnational Insolvency: Global Principles for Co-operation in International Insolvency Cases” – commissioned by The American Law Institute in conjunction with The International Insolvency Institute – annexed 23 “Global Rules on Conflict-of-Laws Matters in International Insolvency Cases”. These proposed “Global Rules” are intended to “serve as legislative recommendations” to (inter alia) promote uniformity and greater certainty in the unpredictable area of conflict of laws. This article provides a brief commentary upon the 23 proposed Global Rules from an Australian perspective (comparing the effect and intent of each rule with the current Australian conflict-of-laws position) and offers some conclusions as to the merits of the “Global Rules” initiative.

Improved shear design rules of cold-formed steel beams

Light gauge cold-formed steel sections have been developed as more economical building solutions to the alternative heavier hot-rolled sections in the commercial and residential markets. Cold-formed lipped channel beams (LCB), LiteSteel beams (LSB) and triangular hollow flange beams (THFB) are commonly used as flexural members such as floor joists and bearers while rectangular hollow flange beams (RHFB) are used in small scale housing developments through to large building structures. However, their shear capacities are determined based on conservative design rules. For the shear design of cold-formed steel beams, their elastic shear buckling strength and the potential post-buckling strength must be determined accurately. Hence experimental and numerical studies were conducted to investigate the shear behaviour and strength of LCBs, LSBs, THFBs and RHFBs. Improved shear design rules including the direct strength method (DSM) based design equations were developed to determine the ultimate shear capacities of these open and hollow flange steel beams. An improved equation for the higher elastic shear buckling coefficient of cold-formed steel beams was proposed based on finite element analysis results and included in the design equations. A new post-buckling coefficient was also introduced in the design equations to include the available post-buckling strength of cold-formed steel beams. This paper presents the details of this study on cold-formed steel beams subject to shear, and the results. It proposes generalised and improved shear design rules that can be used for any type of cold-formed steel beam.

Who Rules Japan? Popular Participation in the Japanese Legal Process

"The dramatic growth of the Japanese economy in the postwar period, and its meltdown in the 1990s, has attracted sustained interest in the power dynamics underlying the management of Japan’s administrative state. Scholars and commentators have long debated over who wields power in Japan, asking the fundamental question: who really governs Japan? This important volume revisits this question by turning its attention to the regulation and design of the Japanese legal system. With essays covering the new lay-judge system in Japanese criminal trials, labour dispute resolution panels, prison policy, gendered justice, government lawyers, welfare administration and administrative transparency, this comprehensive book explores the players and processes in Japan’s administration of justice."--publisher website

Introduction: Who rules Japan?

This chapter reviews the debate about who governs Japan and considers the implications of legal system reforms initiated by the Justice System Reform Council report of 2001.

Towards simple rules heuristics for IT business value

The business value of IT (BVIT) has been a prominent and central research topic in the IS discipline. Due to continuous and unpredictable technology and business changes, a more dynamic perspective on IT business value that includes organizational learning is required. We suggest that simple rules heuristics can address this challenge. The simple rules heuristics approach has been introduced by Eisenhardt and co-authors (Bingham & Eisenhardt, 2011; Bingham, Eisenhardt, & Furr, 2007; Eisenhardt & Sull, 2001) to better understand strategic decision making for capturing superabundant, heterogeneous, fastmoving opportunities. They argue that explicit organizational learning can translate accumulated experience into increasingly effective heuristics for strategic processes in highvelocity environments. We make three main contributions by exploring the suitability of a simple rules heuristics approach for the creation of IT business value: (1) we propose six types of simple rules heuristics for capturing IT-based opportunities in dynamic environments, including synergy heuristics as specifically relevant in an IT context, (2) we show how a simple rules heuristics approach can advance our understanding of dynamics and organizational learning for BVIT, and; (3) we introduce the strategic logic of opportunity to BVIT.

Sharing social space with strangers: Setting, signalling and policing informal rules of driving etiquette

Recent research suggests that aggressive driving may be influenced by driver perceptions of their interactions with other drivers in terms of ‘right’ or ‘wrong’ behaviour. Drivers appear to take a moral standpoint on ‘right’ or ‘wrong’ driving behaviour. However, ‘right’ or ‘wrong’ in the context of road use is not defined solely by legislation, but includes informal rules that are sometimes termed ‘driving etiquette’. Driving etiquette has implications for road safety and public safety since breaches of both formal and informal rules may result in moral judgement of others and subsequent behaviours designed to punish the ‘offender’ or ‘teach them a lesson’. This paper outlines qualitative research that was undertaken with drivers to explore their understanding of driving etiquette and how they reacted to other drivers’ observance or violation of their understanding. The aim was to develop an explanatory framework within which the relationships between driving etiquette and aggressive driving could be understood, specifically moral judgement of other drivers and punishment of their transgression of driving etiquette. Thematic analysis of focus groups (n=10) generated three main themes: (1) courtesy and reciprocity, and the notion of two-way responsibility, with examples of how expectations of courteous behaviour vary according to the traffic interaction; (2) acknowledgement and shared social experience: ‘giving the wave’; and (3) responses to breaches of the expectations/informal rules. The themes are discussed in terms of their roles in an explanatory framework of the informal rules of etiquette and how interactions between drivers can reinforce or weaken a driver’s understanding of driver etiquette and potentially lead to driving aggression.

Early stopping by using stochastic curtailment in a three-arm sequential trial

Summary. Interim analysis is important in a large clinical trial for ethical and cost considerations. Sometimes, an interim analysis needs to be performed at an earlier than planned time point. In that case, methods using stochastic curtailment are useful in examining the data for early stopping while controlling the inflation of type I and type II errors. We consider a three-arm randomized study of treatments to reduce perioperative blood loss following major surgery. Owing to slow accrual, an unplanned interim analysis was required by the study team to determine whether the study should be continued. We distinguish two different cases: when all treatments are under direct comparison and when one of the treatments is a control. We used simulations to study the operating characteristics of five different stochastic curtailment methods. We also considered the influence of timing of the interim analyses on the type I error and power of the test. We found that the type I error and power between the different methods can be quite different. The analysis for the perioperative blood loss trial was carried out at approximately a quarter of the planned sample size. We found that there is little evidence that the active treatments are better than a placebo and recommended closure of the trial.

Gittins indices and constrained allocation in clinical trials

We explore the use of Gittins indices to search for near optimality in sequential clinical trials. Some adaptive allocation rules are proposed to achieve the following two objectives as far as possible: (i) to reduce the expected successes lost, (ii) to minimize the error probability at the end. Simulation results indicate the merits of the rules based on Gittins indices for small trial sizes. The rules are generalized to the case when neither of the response densities is known. Asymptotic optimality is derived for the constrained rules. A simple allocation rule is recommended for one-stage models. The simulation results indicate that it works better than both equal allocation and Bather's randomized allocation. We conclude with a discussion of possible further developments.

Education academics: Rules of engagement

Professor Carol Nicolls suggests that academics and postgraduate students in education should be consciously positioned to influence current and future policy. Through their research they could be contributing to the foundations for building the evidence base for good policy in education, and through their research and scholarship, be seen, where necessary, to publicly challenge the status quo in policy both now and in the future. All of this is more likely to ensure that we achieve the very best outcomes for all in education in Australia.

Not all corporate tax avoiders will be snared by new rules

Hockey’s budget announcement of two major tax integrity measures was flagged before the budget was handed down, but even that came as no surprise. Integrity, or lack thereof, in our tax system is a hot topic and an easy target for a Treasurer looking to sell a federal budget. The first of the proposed changes is to our GST regime. No-one likes hearing that they will be paying more tax. But, the charging of GST on supplies of digital products and services in Australia by an off-shore supplier will at least make sense to the general public. With the inherent unfairness in the current system and a revenue raising prediction of A$350 million over the next four years, most are likely to accept the logic of such a measure. The second of the proposed changes are new laws to be included in Australia’s general anti-avoidance provision. New laws, which will apply from 1 January 2016, are aimed at multinational companies engaged in aggressive tax practices. The proposed anti-avoidance law is designed to stop multinationals that artificially avoid a taxable presence in Australia. It is difficult to see how this strategy of addressing specific behaviour through what is considered a general provision will work. And, it is these changes that are already causing confusion.

Government cracks down on tax avoidance through foreign investment rules

The Turnbull Government announced yet another measure aimed at addressing tax base erosion and profit shifting, placing additional requirements on new foreign investment under the existing national interest test. In the last 12 months Australia has seen various reforms within the tax system. However, this latest initiative is a shift as it links Australia’s tax regime with its foreign investment regime. It sends a broader signal to the market that Australia will look beyond the collection of tax revenues to a consideration of national interest.

Assessing taxpayer response to legislative changes: A case study of ‘in-house’ fringe benefits rules

On 22 October 2012, the Australian Federal Government announced the removal of the $1,000 in-house fringe benefits concession when used as part of a salary packaging arrangement. At the time of the announcement, the Federal Government predicted that the removal of the concession would contribute additional tax revenue of $445 million over the following four years as well as an increase of GST payments to the States and Territories. However, anecdotal evidence at the same time indicated that the Australian employer response was to immediately stop providing employees with such in-house fringe benefits via salary sacrificing arrangements. Data presented in this article, collected from a combination of interviews with tax managers of four Australian entities as well as a review of the published archival data, confirms that the abolition of the $1,000 in-house fringe benefits concession was perceived as a negative change, whereby employees were considered the ‘big losers’ despite assertions by the Federal Government to the contrary. Using a conceptual map of tax rule change developed by Oats and Sadler, this article seeks to understand the reasons for this fringe benefits tax change and taxpayer response. In particular, the economic and political factors, and the responses of the relevant taxpayers (employers) are explored. Drawing on behavioural economic concepts, the actions, attitudes and response of employers to the rule change are also examined. The research findings suggest that the decision by Australian employers to cease providing the in-house fringe benefits as part of a salary-packaging arrangement after the legislative amendment was impacted by more than simple rational behaviour.

Reducing tariffs according to WTO accession rules: The case of Vietnam

When Vietnam joined the World Trade Organization (WTO) in 2007 it was granted an accession period up to 2014. During this period tariffs would have to fall according to the accession agreement. This paper evaluates this 2007–2014 trade liberalization by building an applied general equilibrium model and calibrating it to the Vietnamese data. The model pays careful attention to the fact that Vietnam has many state-owned enterprises. The model simulations show that the WTO tariff reductions will reduce overall welfare. Moreover, the biggest loss will take place among the poor rural households in Vietnam. This paper proposes other tariff reforms that will both raise overall welfare and reduce income inequality.

Transfer pricing rules and competing governments

The literature on the regulation of multinationals' transfer prices has not considered the possibility that governments may use transfer pricing rules strategically when they compete with other governments. The present paper analyses this case and shows that, even in the absence of agency considerations, a non‐cooperative equilibrium is characterised by above‐optimal levels of effective taxation. We then derive conditions under which harmonization of transfer pricing rules lead to a Pareto improvement, and show that harmonization according to the ‘arm's length’ principle—the form of harmonization advocated by the OECD—may not be Pareto improving.