Fire design rules for load bearing cold-formed steel frame walls exposed to realistic design fire curves

Light gauge Steel Frame (LSF) walls are extensively used in the building industry due to the many advantages they provide over other wall systems. Although LSF walls have been used widely, fire design of LSF walls is based on approximate prescriptive methods based on limited fire tests. Also these fire tests were conducted using the standard fire curve [1] and the applicability of available design rules to realistic design fire curves has not been verified. This paper investigates the accuracy of existing fire design rules in the current cold-formed steel standards and the modifications proposed by previous researchers. Of these the recently developed design rules by Gunalan and Mahendran [2] based on Eurocode 3 Part 1.3 [3] and AS/NZS 4600 [4] for standard fire exposure [1] were investigated in detail to determine their applicability to predict the axial compression strengths and fire resistance ratings of LSF walls exposed to realistic design fire curves. This paper also presents the fire performance results of LSF walls exposed to a range of realistic fire curves obtained using a finite element analysis based parametric study. The results from the parametric study were used to develop a simplified design method based on the critical hot flange temperature to predict the fire resistance ratings of LSF walls exposed to realistic fire curves. Finally, the stud failure times (fire resistance rating) obtained from the fire design rules and the simplified design method were compared with parametric study results for LSF walls lined with single and double plasterboards, and externally insulated with rock fibres under realistic fire curves.

The case for the plain packaging of tobacco products

AIMS: The Framework Convention on Tobacco Control (FCTC) requires nations that have ratified the convention to ban all tobacco advertising and promotion. In the face of these restrictions, tobacco packaging has become the key promotional vehicle for the tobacco industry to interest smokers and potential smokers in tobacco products. This paper reviews available research into the probable impact of mandatory plain packaging and internal tobacco industry statements about the importance of packs as promotional vehicles. It critiques legal objections raised by the industry about plain packaging violating laws and international trade agreements. METHODS: Searches for available evidence were conducted within the internal tobacco industry documents through the online document archives; tobacco industry trade publications; research literature through the Medline and Business Source Premier databases; and grey literature including government documents, research reports and non-governmental organization papers via the Google internet search engine. RESULTS: Plain packaging of all tobacco products would remove a key remaining means for the industry to promote its products to billions of the world's smokers and future smokers. Governments have required large surface areas of tobacco packs to be used exclusively for health warnings without legal impediment or need to compensate tobacco companies. CONCLUSIONS: Requiring plain packaging is consistent with the intention to ban all tobacco promotions. There is no impediment in the FCTC to interpreting tobacco advertising and promotion to include tobacco packs.

Global rules on conflict-of-laws matters in international insolvency law cases: An Australian perspective

The 2012 Report “Transnational Insolvency: Global Principles for Co-operation in International Insolvency Cases” – commissioned by The American Law Institute in conjunction with The International Insolvency Institute – annexed 23 “Global Rules on Conflict-of-Laws Matters in International Insolvency Cases”. These proposed “Global Rules” are intended to “serve as legislative recommendations” to (inter alia) promote uniformity and greater certainty in the unpredictable area of conflict of laws. This article provides a brief commentary upon the 23 proposed Global Rules from an Australian perspective (comparing the effect and intent of each rule with the current Australian conflict-of-laws position) and offers some conclusions as to the merits of the “Global Rules” initiative.

Big tobacco's box fetish: Plain packaging at the High Court

Tobacco, says the World Health Organisation (WHO), is “the only legal consumer product that kills when used exactly as intended by the manufacturer.”

The High Court and the Marlboro Man: The plain packaging decision

The High Court of Australia’s ruling on the plain packaging of tobacco products is one of the great constitutional cases of our age. The ruling will resonate throughout the world - as other countries will undoubtedly seek to emulate Australia’s plain packaging regime.

The olive revolution: Australia's plain packaging leads the world

After much political debate, the Australian Parliament passed the Tobacco Plain Packaging Act 2011 (Cth). Australian legislators, such as Richard di Natale, provided moving accounts for the need for plain packaging of tobacco products.

Cigarettes will kill you: The High Court of Australia and the plain packaging of tobacco products

Tobacco, says the World Health Organization (WHO), is “the only legal consumer product that kills when used exactly as intended by the manufacturer.” With a view to discouraging smoking and giving effect to the WHO Framework Convention on Tobacco Control, the Australian Parliament passed the Tobacco Plain Packaging Act 2011 (Cth), in November of that year. The legislation was supported by all the major political parties.

Ireland, plain packaging, and the olive revolution

A world leader in public health, Australia introduced plain packaging of tobacco products. Julia Gillard – the Prime Minister of Australia at the time responsible for plain packaging – has observed: “Since 1 December 2012, cigarettes packets in Australia do not sparkle with gold or silver and do not have any other way to catch and please the eye. They’re a uniform drab colour, with most of the box taken up with the most graphic health warnings. Gruesome pictures of disease perhaps better described as real pictures of the ugly truth.”

New Zealand, plain packaging, and the Trans-Pacific Partnership

The New Zealand Parliament is considering the adoption of plain packaging of tobacco products with the introduction of the Smoke-Free Environments (Tobacco Plain Packaging) Amendment Bill 2014 (NZ). There has been strong support for the measure amongst the major parties – including the National Party; the Maori Party; the Labor Party; and the Greens. The New Zealand parliamentary debate has considered matters of public health and tobacco control; the role of intellectual property law; and the operation of international trade and investment law.

Improved shear design rules of cold-formed steel beams

Light gauge cold-formed steel sections have been developed as more economical building solutions to the alternative heavier hot-rolled sections in the commercial and residential markets. Cold-formed lipped channel beams (LCB), LiteSteel beams (LSB) and triangular hollow flange beams (THFB) are commonly used as flexural members such as floor joists and bearers while rectangular hollow flange beams (RHFB) are used in small scale housing developments through to large building structures. However, their shear capacities are determined based on conservative design rules. For the shear design of cold-formed steel beams, their elastic shear buckling strength and the potential post-buckling strength must be determined accurately. Hence experimental and numerical studies were conducted to investigate the shear behaviour and strength of LCBs, LSBs, THFBs and RHFBs. Improved shear design rules including the direct strength method (DSM) based design equations were developed to determine the ultimate shear capacities of these open and hollow flange steel beams. An improved equation for the higher elastic shear buckling coefficient of cold-formed steel beams was proposed based on finite element analysis results and included in the design equations. A new post-buckling coefficient was also introduced in the design equations to include the available post-buckling strength of cold-formed steel beams. This paper presents the details of this study on cold-formed steel beams subject to shear, and the results. It proposes generalised and improved shear design rules that can be used for any type of cold-formed steel beam.

Who Rules Japan? Popular Participation in the Japanese Legal Process

"The dramatic growth of the Japanese economy in the postwar period, and its meltdown in the 1990s, has attracted sustained interest in the power dynamics underlying the management of Japan’s administrative state. Scholars and commentators have long debated over who wields power in Japan, asking the fundamental question: who really governs Japan? This important volume revisits this question by turning its attention to the regulation and design of the Japanese legal system. With essays covering the new lay-judge system in Japanese criminal trials, labour dispute resolution panels, prison policy, gendered justice, government lawyers, welfare administration and administrative transparency, this comprehensive book explores the players and processes in Japan’s administration of justice."--publisher website

Introduction: Who rules Japan?

This chapter reviews the debate about who governs Japan and considers the implications of legal system reforms initiated by the Justice System Reform Council report of 2001.

Towards simple rules heuristics for IT business value

The business value of IT (BVIT) has been a prominent and central research topic in the IS discipline. Due to continuous and unpredictable technology and business changes, a more dynamic perspective on IT business value that includes organizational learning is required. We suggest that simple rules heuristics can address this challenge. The simple rules heuristics approach has been introduced by Eisenhardt and co-authors (Bingham & Eisenhardt, 2011; Bingham, Eisenhardt, & Furr, 2007; Eisenhardt & Sull, 2001) to better understand strategic decision making for capturing superabundant, heterogeneous, fastmoving opportunities. They argue that explicit organizational learning can translate accumulated experience into increasingly effective heuristics for strategic processes in highvelocity environments. We make three main contributions by exploring the suitability of a simple rules heuristics approach for the creation of IT business value: (1) we propose six types of simple rules heuristics for capturing IT-based opportunities in dynamic environments, including synergy heuristics as specifically relevant in an IT context, (2) we show how a simple rules heuristics approach can advance our understanding of dynamics and organizational learning for BVIT, and; (3) we introduce the strategic logic of opportunity to BVIT.