Measurable progress? Teaching artsworkers to assess and articulate the impact of their work

The National Cultural Policy Discussion Paper—drafted to assist the Australian Government in developing the first national Cultural Policy since Creative Nation nearly two decades ago—envisages a future in which arts, cultural and creative activities directly support the development of an inclusive, innovative and productive Australia. "The policy," it says, "will be based on an understanding that a creative nation produces a more inclusive society and a more expressive and confident citizenry by encouraging our ability to express, describe and share our diverse experiences—with each other and with the world" (Australian Government 3). Even a cursory reading of this Discussion Paper makes it clear that the question of impact—in aesthetic, cultural and economic terms—is central to the Government's agenda in developing a new Cultural Policy. Hand-in-hand with the notion of impact comes the process of measurement of progress. The Discussion Paper notes that progress "must be measurable, and the Government will invest in ways to assess the impact that the National Cultural Policy has on society and the economy" (11). If progress must be measurable, this raises questions about what arts, cultural and creative workers do, whether it is worth it, and whether they could be doing it better. In effect, the Discussion Paper pushes artsworkers ever closer to a climate in which they have to be skilled not just at making work, but at making the impact of this work clear to stakeholders. The Government in its plans for Australia's cultural future, is clearly most supportive of artsworkers who can do this, and the scholars, educators and employers who can best train the artsworkers of the future to do this.

Feasibility study for thermal treatment of solid tire wastes in Bangladesh by using pyrolysis technology

In this study on the basis of lab data and available resources in Bangladesh, feasibility study has been carried out for pyrolysis process converting solid tire wastes into pyrolysis oils, solid char and gases. The process considered for detailed analysis was fixed-bed fire-tube heating pyrolysis reactor system. The comparative techno-economic assessment was carried out in US$ for three different sizes plants: medium commercial scale (144 tons/day), small commercial scale (36 tons/day), pilot scale (3.6 tons/day). The assessment showed that medium commercial scale plant was economically feasible, with the lowest unit production cost than small commercial and pilot scale plants for the production of crude pyrolysis oil that could be used as boiler fuel oil and for the production of upgraded liquid-products.

Re-constructing Asianness in Australia : Yumi Umiumare, Owen Leong, and the remobilisation of monstrosity

In the late twentieth and early twenty-first centuries, Australia’s relationship with its Asian neighbours has been the subject of ongoing aesthetic, cultural and political contestations. As Alison Richards has noted, Australia’s colonial legacy, its Asia-Pacific location, and its ‘white’ self-perception have always made Australia’s relations with Asia fraught. In the latter part of the twentieth century, the paradoxes inherent in Australia’s relationships with and within the Asian region became a dominant theme in debates about nation, nationhood and identity, and prompted a shift in the construction of ‘Asianness’ on Australian stages. On the one hand, anxiety about the multicultural policy of the 1970s and 1980s, and then Prime Minister Paul Keating’s push for greater economic, cultural and artistic exchange with Asia via policies such as the Creative Nation Cultural Policy (1994), saw large numbers of Australians latch on to the reactionary, racist politics of Pauline Hanson’s One Nation Party. As Jacqueline Lo has argued, in this period Asian-Australians were frequently represented as an unassimilable Other, a threat to Australia’s ‘white’ identity, and to individual Australians’ jobs and opportunities. On the other hand, during the same period, a desire to counter the racism in Australian culture, and develop a ‘voice’ that would distinguish Australian cultural products from European theatrical traditions, combined with the new opportunities for cross-cultural exchange that came with the Creative Nation Cultural Policy to produce what Helen Gilbert and Jacqueline Lo have characterised as an Asian turn in Australian theatre...

Studies on the effect of the size of polycaprolactone microspheres for the dispersion of Salbutamol Sulfate from dry powder inhaler formulations

Purpose: To study the effect of the size of the surface-coated polycaprolactone (PCL) microparticle carriers on the aerosolization and dispersion of Salbutamol Sulfate (SS) from Dry Powder Inhaler (DPI) formulations. Methods: The microparticles were fabricated using an emulsion technique in four different sizes (25, 48, 104 and 150 μm) and later coated with Magnesium stearate (MgSt) and leucine. They were characterized by laser diffraction and SEM. The Fine Particle Fraction (FPF) of SS from powder mixtures was determined by a Twin Stage Impinger (TSI). Results: As the carrier size increased from 25 μm to 150 μm, the FPF of the SS delivered by the coated PCL particles increased approximately four fold. A linear relationship was found between the FPF and Volume mean Diameter (VMD) of the particles over this range. Conclusions: The dispersion behaviour of SS from PCL carriers was dependent on the inherent size of the carriers and the increased FPF of SS with increased carrier size probably reflects the higher mechanical forces produced due to the carrier-carrier collisions or collisions between the carrier particles and the internal walls of the inhaler during aerosolization.

Academics’ work and the concept of “profession” : an Australian case study

Universities in Australia and elsewhere have changed considerably in recent years. Inevitably, this has meant that the work of academics has also changed. Academics’ work is of importance because they are key players in universities and universities matter to the nation economically and intellectually in advancing knowledge and its practical application. Through the changes and challenges that have characterised academia in recent years, there is an assumption that academics’ work is representative of a profession. This research study investigates how academics construct their own perspectives regarding the academic "profession". The study is theoretically informed by Freidson’s theory that conceptualises professions as occupations if they are in control of their work rather than it being under the control of either the market or of their employing institutions. Two research questions guide this study. The first question investigates how academics might construct their work in ideal terms and the second one investigates the extent to which such constructions might constitute a "profession". A qualitative case study was conducted within two Australian universities. In all, twenty academics from ten disciplines took part in the study that consisted of a focus group and fifteen individual interviews. The study was conducted in three phases during which a conceptual framework of academics’ work was developed across three versions. This framework acted both a prompt to discussion and as a potential expression of academics’ work. The first version of the framework was developed from the literature during the first phase of the study. This early framework was used during the second phase of the study when five academics took part in a focus group. After the focus group, the second version of the framework was developed and used with fifteen academics in individual interviews during phase three of the study. The third version of the framework was the outcome of a synthesis of the themes that were identified in the data. The discussion data from the focus group and the individual interviews were analysed through a content analysis approach that identified four major themes. The first theme was that academics reported that their work would ideally be located within universities committed to using their expert knowledge to serve the world. The second theme was that academics reported that they wanted sufficient thinking time and reasonable workloads to undertake the intellectual work that they regard as their core responsibility, particularly in relation to undertaking research. They argued against heavy routine administrative workloads and sought a continuation of current flexible working arrangements. The third theme was that teaching qualifications should not be mandated but that there should be a continuation of the present practice of universities offering academics the opportunity to undertake formal teaching qualifications if they wish to. Finally, academics reported that they wanted values that have traditionally mattered to academia to continue to be respected and practised: autonomy, collegiality and collaborative relationships, altruism and service, and intellectual integrity. These themes are sympathetic to Freidson’s theory of professions in all but one matter: the non-mandatory nature of formal qualifications which he regards as absolutely essential for the performance of the complex intellectual work that characterises occupations that are professions. The study places the issue of academic professionalism on the policy agenda for universities wishing to identify academics’ work as a profession. The study contributes a theory-based and data-informed conceptual framework for academics’ work that can be considered in negotiating the nature and extent of their work. The framework provides a means of analysing what "academic professionalism" might mean; it adds specificity to such discussions by exploring a particular definition of profession, namely Freidson’s theory of professions as occupations that are in control of their own work. The study contributes to the development of theories around higher education concepts of academic professionalism and, in so doing, links that theoretical contribution to the wider professions field.

Pyrolysis of coconut shell for bio-oil

The conversion of coconut shell into pyrolytic oil by fixed bed fire-tube heating reactor has been taken into consideration in this study. The major components of the system were fixed bed fire-tube heating reactor, liquid condenser and collectors. The raw and crushed tamarind seed in particle form was pyrolized in an electrically heated 10 cm diameter and 27 cm high fixed bed reactor. The products are oil, char and gases. The parameters varied were reactor bed temperature, running time, gas flow rate and feed particle size. The parameters were found to influence the product yields significantly. The maximum liquid yield was 34.3 wt% at 4500C for a feed size of 0.6mm at a gas flow rate of 6 liter/min with a running time of minute. The pyrolysis oil was obtained at these optimum process conditions were analyzed for physical and chemical properties to be used as an alternative fuel.

Canadian Crime Control in the New Millennium: The Influence of Neo-conservative U.S. Policies and Practices

An important issue facing Canadians today is crime control and prevention. Research done in the late 1980s and early 1990s by three sociologists shows that Canadian federal criminal justice policies and practices adopted by the Mulroney government from 1984 to 1990 were inconsistent with US ‘law and order’ models in place at that time. However, since the mid‐1990s, Canadian federal and provincial governments have mimicked some US authoritarian and gender‐blind means of curbing crime. The main objective of this paper is to provide some key examples of criminal justice policy transfer from the USA in Canada. At first glance, Canada may appear to be a ‘kinder, gentler nation,’ but not to the extent assumed by many, if not most, outside observers.

The Punitive Turn in Juvenile Justice: Cultures of Control and Rights of Compliance in Western Europe and the USA

Separate systems of justice for children and young people have always been beset by issues of contradiction and compromise. There is compelling evidence that such ambiguity is currently being `resolved' by a greater governmental resort to neo-conservative punitive and correctional interventions and a neo-liberal responsibilizing mentality in which the protection historically afforded to children is rapidly dissolving. This resurgent authoritarianism appears all the more anachronistic when it is set against the widely held commitment to act within the guidelines established by various children's rights conventions. Of note is the United Nations Convention on the Rights of the Child, frequently described as the most ratified human rights convention in the world, but lamentably also the most violated. Based on international research on juvenile custody rates and children's rights compliance in the USA and Western Europe, this article examines why and to what extent `American exceptionalism' might be permeating European nation states.

The utilization of waste date seed as bio-oil and activated carbon by pyrolysis process

The renovation of biomass waste in the form of date seed waste into activated carbon and biofuel by fixed bed pyrolysis reactor has been focused in this study to obtain gaseous, liquid, and solid products. The date seed in particle form is pyrolysed in an externally heated fixed bed reactor with nitrogen as the carrier gas. The reactor is heated from 400◦C to 600◦C. A maximum liquid yield of 50wt.% and char of 30wt.% are obtained at a reactor bed temperature of 500◦C with a running time of 120 minutes. The oil is found to possess favorable flash point and reasonable density and viscosity. The higher calorific value is found to be 28.636 MJ/kg which is significantly higher than other biomass derived. Decolonization of 85–97% is recorded for the textile effluent and 75–90% for the tannery effluent, in all cases decreasing with temperature increase. Good adsorption capacity of the prepared activated carbon in case of diluted textile and tannery effluent was found.

Fixed bed pyrolysis of date seed waste for liquid oil production

The conversion of biomass waste in the form of date seed into pyrolysis oil by fixed bed pyrolysis reactor has been taken into consideration in this study. A fixed bed pyrolysis has been designed and fabricated for obtaining liquid fuel from these date seeds. The major component of the system are fixed bed pyrolysis reactor, liquid condenser and liquid collector. The date seed in particle form is pyrolysed in an externally heated 7.6 cm diameter and 46 cm high fixed bed reactor with nitrogen as the carrier gas. The reactor is heated by means of a biomass source cylindrical heater from 4000C to 6000C. The products are oil, char and gas. The reactor bed temperature, running time and feed particle size are considered as process parameters. The parameters are found to influence the product yield significantly. A maximum liquid yield of 50 wt.% is obtained at a reactor bed temperature of 5000 C for a feed size volume of 0.11- 0.20 cm3 with a running time of 120 minutes. The pyrolysis oil obtained at this optimum process conditions are analyzed for some fuel properties and compared with some other biomass derived pyrolysis oils and also with conventional fuels. The oil is found to possess favorable flash point and reasonable density and viscosity. The higher calorific value is found to be 28.636 MJ/kg which is significantly higher than other biomass derived pyrolysis oils.

A token to the future : a digital ‘archive’ of early Australian children’s literature

This essay considers a specific digital ‘archive’ of early Australian children’s literature, known as the Children’s Literature Digital Resources (CLDR), which is located in AustLit: The Australian Literature Resource ( http://www.austlit.edu.au ). We examine what the CLDR collection can tell us about Australia’s history. To narrow the scope, we focus on how Australia was constructing itself as a nation with its own character, or national identity, in texts written for children from the latter part of the nineteenth century up until the end of World War II. Our approach is to consider how early Australian children’s literature included in the CLDR collection rhetorically constructs nation and place, and in so doing constructs an Australian identity for its implied readers.

Design and construction of fixed bed pyrolysis system and plum seed pyrolysis for bio-oil production

This work investigated the production of bio oil from plum seed (Zyziphus jujuba) by fixed bed pyrolysis technology. A fixed bed pyrolysis system has been designed and fabricated for production of bio oil. The major components of the system are: fixed bed reactor, liquid condenser and liquid collector. Nitrogen gas was used to maintain the inert atmosphere in the reactor where the pyrolysis reaction takes place. The feedstock considered in this study is plum seed as it is available waste material in Bangladesh. The reactor is heated by means of a cylindrical biomass external heater. Rice husk was used as the energy source. The products are oil, char and gas. The parameters varied are reactor bed temperature, running time and feed particle size. The parameters are found to influence the product yields significantly. The maximum liquid yield of 39 wt% at 5200C for a feed particle size of 2.36-4.75 mm and a gas flow rate of 8 liter/min with a running time of 120 minute. The pyrolysis oil obtained at these optimum process conditions are analyzed for some of their properties as an alternative fuel. The density of the liquid was closer with diesel. The viscosity of the plum seed liquid was lower than that of the conventional fuels. The calorific value of the pyrolysis oil is one half of the diesel fuel.

Fast pyrolysis for better utilization of tamarind seed from renewable energy point of view

The conversion of tamarind seeds into pyrolytic oil by fixed bed fire-tube heating reactor has been taken into consideration in this study. The major components of the system were fixed bed fire-tube heating reactor, liquid condenser and collectors. The raw and crushed tamarind seed in particle form was pyrolized in an electrically heated 10 cm diameter and 27 cm high fixed bed reactor. The products are oil, char and gases. The parameters varied were reactor bed temperature, running time, gas flow rate and feed particle size. The parameters were found to influence the product yields significantly. The maximum liquid yield was 45 wt% at 4000C for a feed size of 1.07cm3 at a gas flow rate of 6 liter/min with a running time of 30 minute. The pyrolysis oil was obtained at these optimum process conditions were analyzed for physical and chemical properties to be used as an alternative fuel.

Valorization of solid tire wastes available in Bangladesh by thermal treatment

In this study available solid tire wastes in Bangladesh were characterized through proximate and ultimate analyses, gross calorific values and thermogravimetric analysis to investigate their suitability as feedstock for thermal recycling by pyrolysis technology. A new approach in heating system, fixedbed fire-tube heating pyrolysis reactor has been designed and fabricated for the recovery of liquid hydrocarbons from solid tire wastes. The tire wastes were pyrolysed in the internally heated fixed-bed fire-tube heating reactor and maximum liquid yield of 46-55 wt% of solid tire waste was obtained at a temperature of 475 oC, feed size 4 cm3, with a residence time of 5 s under N2 atmosphere. The liquid products were characterized by physical properties, elemental analysis, FT-IR, 1H-NMR, GC MS techniques and distillation. The results show that the liquid products are comparable to petroleum fuels whereas fractional distillations and desulphurization are essential to be used as alternative for diesel engine fuels.

Fixed bed pyrolysis of pulm seed waste for liquid oil production

Among various thermo-chemical conversion processes, pyrolysis is considered as an emerging technology for liquid oil production. The conversion of biomass waste in the form of plum seed into pyrolysis oil by fixed bed pyrolysis reactor has been taken into consideration in this study. A fixed bed pyrolysis has been designed and fabricated for obtaining liquid fuel from this plum seeds. The major component of the system are fixed bed pyrolysis reactor, liquid condenser and liquid collectors. The plum seed in particle form is pyrolysed in an externally heated 7.6 cm diameter and 46 cm high fixed bed reactor with nitrogen as the carrier gas. The reactor is heated by means of a biomass source cylindrical heater from 4000C to 6000C. The products are oil, char and gas. The reactor bed temperature, running time and feed particle size are considered as process parameters. The parameters are found to influence the product yield significantly. A maximum liquid yield of 39 wt% of biomass feed is obtained with particle size of 2.36-4.75 mm at a reactor bed temperature of 520oC with a running time of 120 minutes. The pyrolysis oil obtained at this optimum process conditions are analyzed for some fuel properties and compared with some other biomass derived pyrolysis oils and conventional fuels. The oil is found to possess favorable flash point and reasonable density and viscosity. The higher calorific value is found to be 22.39 MJ/kg which is higher than other biomass derived pyrolysis oils.