Anchoring and exposing in the third place : regular identification at the boundaries of social realms

Harry’s is my favourite bar in my neighbourhood. It is a small wine bar, owned by three men in their late thirties and targeted at people like them; my gentrifying inner city neighbourhood’s 20 to 40 something urban middle class. Harry’s has seats along the bar, booths inside, and a courtyard out the back. The seating arrangements mean that larger groups tend to gather outside, groups of two to four spread around the location, and people by themselves, or in groups of two, tend to sit at the bar. I usually sit at the bar....

Competition and innovation : independent production in the Chinese TV industry

Independent television production is recognised for its capacity to generate new kinds of program content, as well as deliver innovation in formats. Globally, the television industry is entering into the post-broadcasting era where audiences are fragmented and content is distributed across multiple platforms. The effects of this convergence are now being felt in China, as it both challenges old statist models and presents new opportunities for content innovation. This thesis discusses the status of independent production in China, making relevant comparisons with independent production in other countries. Independent television production has become an important element in the reform of broadcasting in China in the past decade. The first independent TV production company was registered officially in 1994. While there are now over 4000 independent companies, the term „independent. does not necessarily constitute autonomy. The question the thesis addresses is: what is the status and nature of independence in China? Is it an appropriate term to use to describe the changing environment, or is it a misnomer? The thesis argues that Chinese independents operate alongside the mainstream state-owned system; they are „dependent. on the mainstream. Therefore independent television in China is a relative term. By looking at several companies in Beijing, mainly in entertainment, TV drama and animation, the thesis shows how the sector is injecting fresh ideas into the marketplace and how it plays an important role in improving innovation in many aspects of the television industry. The thesis shows how independent television companies in China are looking to protect their property rights. It demonstrates that far from being at the cutting edge, independents are reliant on a system that has many inbuilt structural problems. The thesis outlines many of the challenges facing 'independents'.

Jams, jelly beans and the fruits of passion - art book (26 Pages)

Statement: Jams, Jelly Beans and the Fruits of Passion Let us search, instead, for an epistemology of practice implicit in the artistic, intuitive processes which some practitioners do bring to situations of uncertainty, instability, uniqueness, and value conflict. (Schön 1983, p40) Game On was born out of the idea of creative community; finding, networking, supporting and inspiring the people behind the face of an industry, those in the mist of the machine and those intending to join. We understood this moment to be a pivotal opportunity to nurture a new emerging form of game making, in an era of change, where the old industry models were proving to be unsustainable. As soon as we started putting people into a room under pressure, to make something in 48hrs, a whole pile of evolutionary creative responses emerged. People refashioned their craft in a moment of intense creativity that demanded different ways of working, an adaptive approach to the craft of making games – small – fast – indie. An event like the 48hrs forces participants’ attention onto the process as much as the outcome. As one game industry professional taking part in a challenge for the first time observed: there are three paths in the genesis from idea to finished work: the path that focuses on mechanics; the path that focuses on team structure and roles, and the path that focuses on the idea, the spirit – and the more successful teams put the spirit of the work first and foremost. The spirit drives the adaptation, it becomes improvisation. As Schön says: “Improvisation consists on varying, combining and recombining a set of figures within the schema which bounds and gives coherence to the performance.” (1983, p55). This improvisational approach is all about those making the games: the people and the principles of their creative process. This documentation evidences the intensity of their passion, determination and the shit that they are prepared to put themselves through to achieve their goal – to win a cup full of jellybeans and make a working game in 48hrs. 48hr is a project where, on all levels, analogue meets digital. This concept was further explored through the documentation process. All of these pictures were taken with a 1945 Leica III camera. The use of this classic, film-based camera, gives the images a granularity and depth, this older slower technology exposes the very human moments of digital creativity. ____________________________ Schön, D. A. 1983, The Reflective Practitioner: How Professionals Think in Action, Basic Books, New York

A descriptive approach for power system stability and security assessment

Power system dynamic analysis and security assessment are becoming more significant today due to increases in size and complexity from restructuring, emerging new uncertainties, integration of renewable energy sources, distributed generation, and micro grids. Precise modelling of all contributed elements/devices, understanding interactions in detail, and observing hidden dynamics using existing analysis tools/theorems are difficult, and even impossible. In this chapter, the power system is considered as a continuum and the propagated electomechanical waves initiated by faults and other random events are studied to provide a new scheme for stability investigation of a large dimensional system. For this purpose, the measured electrical indices (such as rotor angle and bus voltage) following a fault in different points among the network are used, and the behaviour of the propagated waves through the lines, nodes, and buses is analyzed. The impact of weak transmission links on a progressive electromechanical wave using energy function concept is addressed. It is also emphasized that determining severity of a disturbance/contingency accurately, without considering the related electromechanical waves, hidden dynamics, and their properties is not secure enough. Considering these phenomena takes heavy and time consuming calculation, which is not suitable for online stability assessment problems. However, using a continuum model for a power system reduces the burden of complex calculations

Ocular surface changes with short-term contact lens wear

Contact lenses are a common method for the correction of refractive errors of the eye. While there have been significant advancements in contact lens designs and materials over the past few decades, the lenses still represent a foreign object in the ocular environment and may lead to physiological as well as mechanical effects on the eye. When contact lenses are placed in the eye, the ocular anatomical structures behind and in front of the lenses are directly affected. This thesis presents a series of experiments that investigate the mechanical and physiological effects of the short-term use of contact lenses on anterior and posterior corneal topography, corneal thickness, the eyelids, tarsal conjunctiva and tear film surface quality. The experimental paradigm used in these studies was a repeated measures, cross-over study design where subjects wore various types of contact lenses on different days and the lenses were varied in one or more key parameters (e.g. material or design). Both, old and newer lens materials were investigated, soft and rigid lenses were used, high and low oxygen permeability materials were tested, toric and spherical lens designs were examined, high and low powers and small and large diameter lenses were used in the studies. To establish the natural variability in the ocular measurements used in the studies, each experiment also contained at least one “baseline” day where an identical measurement protocol was followed, with no contact lenses worn. In this way, changes associated with contact lens wear were considered in relation to those changes that occurred naturally during the 8 hour period of the experiment. In the first study, the regional distribution and magnitude of change in corneal thickness and topography was investigated in the anterior and posterior cornea after short-term use of soft contact lenses in 12 young adults using the Pentacam. Four different types of contact lenses (Silicone hydrogel/ Spherical/–3D, Silicone Hydrogel/Spherical/–7D, Silicone Hydrogel/Toric/–3D and HEMA/Toric/–3D) of different materials, designs and powers were worn for 8 hours each, on 4 different days. The natural diurnal changes in corneal thickness and curvature were measured on two separate days before any contact lens wear. Significant diurnal changes in corneal thickness and curvature within the duration of the study were observed and these were taken into consideration for calculating the contact lens induced corneal changes. Corneal thickness changed significantly with lens wear and the greatest corneal swelling was seen with the hydrogel (HEMA) toric lens with a noticeable regional swelling of the cornea beneath the stabilization zones, the thickest regions of the lenses. The anterior corneal surface generally showed a slight flattening with lens wear. All contact lenses resulted in central posterior corneal steepening, which correlated with the relative degree of corneal swelling. The corneal swelling induced by the silicone hydrogel contact lenses was typically less than the natural diurnal thinning of the cornea over this same period (i.e. net thinning). This highlights why it is important to consider the natural diurnal variations in corneal thickness observed from morning to afternoon to accurately interpret contact lens induced corneal swelling. In the second experiment, the relative influence of lenses of different rigidity (polymethyl methacrylate – PMMA, rigid gas permeable – RGP and silicone hydrogel – SiHy) and diameters (9.5, 10.5 and 14.0) on corneal thickness, topography, refractive power and wavefront error were investigated. Four different types of contact lenses (PMMA/9.5, RGP/9.5, RGP/10.5, SiHy/14.0), were worn by 14 young healthy adults for a period of 8 hours on 4 different days. There was a clear association between fluorescein fitting pattern characteristics (i.e. regions of minimum clearance in the fluorescein pattern) and the resulting corneal shape changes. PMMA lenses resulted in significant corneal swelling (more in the centre than periphery) along with anterior corneal steepening and posterior flattening. RGP lenses, on the other hand, caused less corneal swelling (more in the periphery than centre) along with opposite effects on corneal curvature, anterior corneal flattening and posterior steepening. RGP lenses also resulted in a clinically and statistically significant decrease in corneal refractive power (ranging from 0.99 to 0.01 D), large enough to affect vision and require adjustment in the lens power. Wavefront analysis also showed a significant increase in higher order aberrations after PMMA lens wear, which may partly explain previous reports of "spectacle blur" following PMMA lens wear. We further explored corneal curvature, thickness and refractive changes with back surface toric and spherical RGP lenses in a group of 6 subjects with toric corneas. The lenses were worn for 8 hours and measurements were taken before and after lens wear, as in previous experiments. Both lens types caused anterior corneal flattening and a decrease in corneal refractive power but the changes were greater with the spherical lens. The spherical lens also caused a significant decrease in WTR astigmatism (WRT astigmatism defined as major axis within 30 degrees of horizontal). Both the lenses caused slight posterior corneal steepening and corneal swelling, with a greater effect in the periphery compared to the central cornea. Eyelid position, lid-wiper and tarsal conjunctival staining were also measured in Experiment 2 after short-term use of the rigid and SiHy contact lenses. Digital photos of the external eyes were captured for lid position analysis. The lid-wiper region of the marginal conjunctiva was stained using fluorescein and lissamine green dyes and digital photos were graded by an independent masked observer. A grading scale was developed in order to describe the tarsal conjunctival staining. A significant decrease in the palpebral aperture height (blepharoptosis) was found after wearing of PMMA/9.5 and RGP/10.5 lenses. All three rigid contact lenses caused a significant increase in lid-wiper and tarsal staining after 8 hours of lens wear. There was also a significant diurnal increase in tarsal staining, even without contact lens wear. These findings highlight the need for better contact lens edge design to minimise the interactions between the lid and contact lens edge during blinking and more lubricious contact lens surfaces to reduce ocular surface micro-trauma due to friction and for. Tear film surface quality (TFSQ) was measured using a high-speed videokeratoscopy technique in Experiment 2. TFSQ was worse with all the lenses compared to baseline (PMMA/9.5, RGP/9.5, RGP/10.5, and SiHy/14) in the afternoon (after 8 hours) during normal and suppressed blinking conditions. The reduction in TFSQ was similar with all the contact lenses used, irrespective of their material and diameter. An unusual pattern of change in TFSQ in suppressed blinking conditions was also found. The TFSQ with contact lens was found to decrease until a certain time after which it improved to a value even better than the bare eye. This is likely to be due to the tear film drying completely over the surface of the contact lenses. The findings of this study also show that there is still a scope for improvement in contact lens materials in terms of better wettability and hydrophilicity in order to improve TFSQ and patient comfort. These experiments showed that a variety of changes can occur in the anterior eye as a result of the short-term use of a range of commonly used contact lens types. The greatest corneal changes occurred with lenses manufactured from older HEMA and PMMA lens materials, whereas modern SiHy and rigid gas permeable materials caused more subtle changes in corneal shape and thickness. All lenses caused signs of micro-trauma to the eyelid wiper and palpebral conjunctiva, although rigid lenses appeared to cause more significant changes. Tear film surface quality was also significantly reduced with all types of contact lenses. These short-term changes in the anterior eye are potential markers for further long term changes and the relative differences between lens types that we have identified provide an indication of areas of contact lens design and manufacture that warrant further development.

Creating successful cultural Brokers : the pros and cons of a community of practice approach in arts management education

Arts managers play a critical role in creating a strong, sustainable arts and cultural sector. They operate as brokers, creating programs, and, more critically, coordinating the relationships between artists, audiences, communities, governments and sponsors required to make these programs a success. Based on study of model developed for a subject in the Master of Creative Industries (Creative Production & Arts Management) at Queensland University of Technology (QUT), this paper examines the pros and cons of a “community of practice” approach in training arts management students to act as cultural brokers. It provides data on the effectiveness of a range of activities – including Position Papers, Case Studies, Masterclasses, and offline and online conversations – that can be used facilitate the peer-to-peer engagement by which students work together to build their cultural brokering skills in a community of practice. The data demonstrates that, whilst students appreciate this approach, educators must provide enough access to voices of authority – that is, to arts professionals – to establish a well-functioning community of practice, and ensure that more expert students do not become frustrated when they are unwittingly and unwillingly thrust into this role by less expert classmates. This is especially important in arts management, where classes are always diverse, due to the fact that most dedicated programs in Australia, as in the US, UK and Europe, are taught via small-scale programs at graduate level which accept applicants from a wide variety of arts and non-arts backgrounds.

Emergent innovation through the co-evolution of informal and formal media economies

Well-established distinctions between amateur and professional are blurring as the impact of social media, changes in cultural consumption, and crises in copyright industries’ business models are felt across society and economy. I call this the increasingly rapid co-evolution of the formal market and informal household sectors and analyse it through the concept of ‘social network markets’ – individual choices are made on the basis of other’s choices and such networked preferencing is enhanced by the growing ubiquity of social media platforms. This may allow us better to understand sources of disruption and innovation in audiovisual production and distribution in wealthy Western markets which are as significant as those posed by informal practices outside the West. I examine what is happening around the monetization and professionalization of online video (YouTube, for example) and the socialization of professional production strategies (transmedia, for example) as innovation from the margins.

Challenges and opportunities in the journey of the design-led innovation champions

The purpose of this study is to deepen our knowledge and understanding of the challenges faced by design champions in proposing and applying design methods and insights in existing firms. This study investigates the early stages of the journey of the design champions as they incorporate design into operational and strategic conversations and practices, and their progress in mastering these challenges as opportunities in a firm context. Little research on this topic has been reported, yet it is of growing interest as more firms turn to design-led innovation to shape their strategies and practices. Interviews with design champions were used to investigate first hand the experience and reflections the many challenges provide. Findings from the study provide some early insights that can be extended through further research.

What is the role of design-led innovation and design-led prototyping in developing novel business models?

Recently, ‘business model’ and ‘business model innovation��� have gained substantial attention in management literature and practice. However, many firms lack the capability to develop a novel business model to capture the value from new technologies. Existing literature on business model innovation highlights the central role of ‘customer value’. Further, it suggests that firms need to experiment with different business models and engage in ‘trail-and-error’ learning when participating in business model innovation. Trial-and error processes and prototyping with tangible artifacts are a fundamental characteristic of design. This conceptual paper explores the role of design-led innovation in facilitating firms to conceive and prototype novel and meaningful business models. It provides a brief review of the conceptual discussion on business model innovation and highlights the opportunities for linking it with the research stream of design-led innovation. We propose design-led business model innovation as a future research area and highlight the role of design-led prototyping and new types of artifacts and prototypes play within it. We present six propositions in order to outline future research avenues.

Levesys : innovation management enabling a conversation about the future

This case study reports on the impact and business transformation of an IMP³rove assessment and follow-up workshop on Australian SME LEVESYS (www.levesys.com), which was undertaken by QMI Solutions. Innovation was not a foreign term to the company, which focuses on the development of enterprise resource planning (ERP) software for the Australian construction sector. However, before seeing and undergoing the IMP³rove process, this company had difficulty articulating their innovation problems and, therefore, had not achieved growth targets from its R&D efforts. This case study highlights the role of IMP³rove in assisting LEVESYS to take the first step in transforming itself through innovation.

Performing design: game design, practice, praxis and the theatre of the impressed

This paper is a reflection on a design teaching project that endeavours to establish a culture of critical design thinking in a tertiary game design course. In the first instance, the ‘performing design’ project arose as a response to contemporary issues and tensions in the Australian games industry and game design education, in essence, the problem of how to scaffold undergraduate students from their entry point as ‘players’ (the impressed) into becoming designers. The performing design project therefore started as a small-scale intervention to inspire reflection in a wider debate that includes: the potential evolution of the contemporary games industry; the purpose of game design education; and the positioning of game design as a design discipline. Our position is that designing interactive playful works or games is victim of a tendency to simplify the discipline and view it from either the perspective of science or art. In this paper we look at some of the historical discussions on the distinct identity of games. Then we present an overview of the typical state of play in contemporary game design education which inspires the performing design project as an intervention or teaching technique. This leads us to question understandings of education and training and creativity and innovation. Finally we reflect on insights arising from the performing design project which lead us to support Archer’s call for a ‘third area’ that balances the monolithic practices of the two major academic disciplines.

Integrated configuration of enterprise systems for interoperability : towards process model and business document specification alignment

Enterprise Systems (ES) can be understood as the de facto standard for holistic operational and managerial support within an organization. Most commonly ES are offered as commercial off-the-shelf packages, requiring customization in the user organization. This process is a complex and resource-intensive task, which often prevents small and midsize enterprises (SME) from undertaking configuration projects. Especially in the SME market independent software vendors provide pre-configured ES for a small customer base. The problem of ES configuration is shifted from the customer to the vendor, but remains critical. We argue that the yet unexplored link between process configuration and business document configuration must be closer examined as both types of configuration are closely tied to one another.

Emergent and deliberate entrepreneurial strategies in SMEs

Entrepreneurial strategies in large firms have been analysed in terms of antecedent conditions, elements and outcomes (Ireland, Covin & Kuratko, 2009), but to date less attention has been given to the strategies used by small and medium enterprises to remain competitive. The purpose of this paper is to increase our knowledge and understanding of the types of strategies and activities that existing small and medium enterprises (SMEs) are using to generate new economic activity to ensure the success of their business. This paper explores findings from a qualitative study of SMEs and identifies entrepreneurial management (Stevenson & Jarillo 1995) in different forms in different sized firms. Findings indicate that small and medium sized enterprises seeking to remain competitive, engage in proactive entrepreneurial strategies that develop and exploit capabilities.

Two novel mutations and a previously unreported intronic polymorphism in the NOTCH3 gene

Cerebral autosomal dominant arteriopathy with subcortical infarcts and leukoencephalopathy (CADASIL) is a hereditary disease of small vessel caused by mutations in the NOTCH3 gene (NCBI Gene ID: 4854) located on chromosome 19p13.1. NOTCH3 consists of 33 exons which encode a protein of 2321 amino acids. Exons 3 and 4 were found to be mutation hotspots, containing more than 65% of all CADASIL mutations. We performed direct sequencing on an ABI 3130 Genetic Analyser to screen for mutations and polymorphisms on 300 patients who were clinically suspected to have CADASIL. First, exons 3 and 4 were screened in NOTCH3 and if there were no variations found, then extended CADASIL testing (exons 2, 11, 18 and 19) was offered to patients. Here we report two novel non-synonymous mutations identified in the NOTCH3 gene. The first mutation, located in exon 4 was found in a 49-year-old female and causes an alanine to valine amino acid change at position 202 (605C > T). The second mutation, located in exon 11, was found in a 66-year-old female and causes a cysteine to arginine amino acid change at position 579 (1735T > C). We also report a 46-year-old male with a known polymorphism Thr101Thr (rs3815188) and an unreported polymorphism NM_000435.2:c.679+60G>A observed in intron 4 of the NOTCH3 gene. Although Ala202Ala (rs1043994) is a common polymorphism in the NOTCH3 gene, our reported novel mutation (Ala202Val) causes an amino acid change at the same locus. Our other reported mutation (Cys579Arg) correlates well with other known mutations in NOTCH3, as the majority of the CADASIL-associated mutations in NOTCH3 generally occur in the EGF-like (epidermal growth factor-like) repeat domain, causing a change in the number of cysteine residues. The intronic polymorphism NM_000435.2:c.679+60G>A lies close to the intron–exon boundary and may affect the splicing mechanism in the NOTCH3 gene.

Large-scale association study identifies ICAM gene region as breast and prostate cancer susceptibility locus

We conducted a large-scale association study to identify genes that influence nonfamilial breast cancer risk using a collection of German cases and matched controls and >25,000 single nucleotide polymorphisms located within 16,000 genes. One of the candidate loci identified was located on chromosome 19p13.2 [odds ratio (OR) = 1.5, P = 0.001]. The effect was substantially stronger in the subset of cases with reported family history of breast cancer (OR = 3.4, P = 0.001). The finding was subsequently replicated in two independent collections (combined OR = 1.4, P < 0.001) and was also associated with predisposition to prostate cancer in an independent sample set of prostate cancer cases and matched controls (OR = 1.4, P = 0.002). High-density single nucleotide polymorphism mapping showed that the extent of association spans 20 kb and includes the intercellular adhesion molecule genes ICAM1, ICAM4, and ICAM5. Although genetic variants in ICAM5 showed the strongest association with disease status, ICAM1 is expressed at highest levels in normal and tumor breast tissue. A variant in ICAM5 was also associated with disease progression and prognosis. Because ICAMs are suitable targets for antibodies and small molecules, these findings may not only provide diagnostic and prognostic markers but also new therapeutic opportunities in breast and prostate cancer.