A new plasmid display technology for the in vitro selection of functional phenotype–genotype linked proteins

Background: Display technologies which allow peptides or proteins to be physically associated with the encoding DNA are central to procedures which involve screening of protein libraries in vitro for new or altered function. Here we describe a new system designed specifically for the display of libraries of diverse, functional proteins which utilises the DNA binding protein nuclear factor κB (NF-κB) p50 to establish a phenotype–genotype link between the displayed protein and the encoding gene. Results: A range of model fusion proteins to either the amino- or carboxy-terminus of NF-κB p50 have been constructed and shown to retain the picomolar affinity and DNA specificity of wild-type NF-κB p50. Through use of an optimal combination of binding buffer and DNA target sequence, the half-life of p50–DNA complexes could be increased to over 47 h, enabling the competitive selection of a variety of protein–plasmid complexes with enrichment factors of up to 6000-fold per round. The p50-based plasmid display system was used to enrich a maltose binding protein complex to homogeneity in only three rounds from a binary mixture with a starting ratio of 1:108 and to enrich to near homogeneity a single functional protein from a phenotype–genotype linked Escherichia coli genomic library using in vitro functional selections. Conclusions: A new display technology is described which addresses the challenge of functional protein display. The results demonstrate that plasmid display is sufficiently sensitive to select a functional protein from large libraries and that it therefore represents a useful addition to the repertoire of display technologies.

Sweet sorghum : opportunities for a new, renewable fuel and food industry in Australia

Sweet sorghum is receiving significant global interest as an agro-industrial crop because of its capacity to co-produce energy, food, and feed products in integrated biorefineries. This report assesses the opportunities to develop a sweet sorghum industry in Australia, reports on research demonstrating the production of energy, food, and feed products, and assesses the potential economic and sustainability benefits of sweet sorghum biorefineries in the Australian context.

Challenges for implementation of a new model of collaborative design management: Analyzing the impact of human factor

The ineffectiveness of current design processes has been well studied and has resulted in widespread calls for the evolution and development of new management processes. Even following the advent of BIM, we continue to move from one stage to another without necessarily having resolved all the issues. CAD design technology, if well handled, could have significantly raised the level of quality and efficiency of current processes, but in practice this was not fully realized. Therefore, technology alone can´t solve all the problems and the advent of BIM could result in a similar bottleneck. For a precise definition of the problem to be solved we should start by understanding what are the main current bottlenecks that have yet to be overcome by either new technologies or management processes, and the impact of human behaviour-related issues which impact the adoption and utilization of new technologies. The fragmented and dispersed nature of the AEC sector, and the huge number of small organizations that comprise it, are a major limiting factor. Several authors have addressed this issue and more recently IDDS has been defined as the highest level of achievement. However, what is written on IDDS shows an extremely ideal situation on a state to be achieved; it shows a holistic utopian proposition with the intent to create the research agenda to move towards that state. Key to IDDS is the framing of a new management model which should address the problems associated with key aspects: technology, processes, policies and people. One of the primary areas to be further studied is the process of collaborative work and understanding, together with the development of proposals to overcome the many cultural barriers that currently exist and impede the advance of new management methods. The purpose of this paper is to define and delimit problems to be solved so that it is possible to implement a new management model for a collaborative design process.

The younger audience : children and broadcasting in New Zealand

The role and influence of media in the The lives of children are ongoing sources of public, political and academic debates. These debates move back and forth along a care-control continuum (Cohen, 1997), and reflect a commitment both to educate children and to regulate their media experiences. Rapid advancements in computer technologies have vastly expanded the range of media experiences available to children. The development of Internet information and the rapid expansion of channels as a result of digital television have created increasingly accessible and diverse sources of media for children. These media are instantaneous and, in some circumstances, constantly available. As a result, a substantial body of international research has emerged that examines the influence of media consumption on children. How much time do children spend interacting with media? What sorts of media do they access? Are media harmful or beneficial to children? If so, in which contexts? Do media influence children’s personal development? And what role should governments, broadcasters and independent producers play in the regulation of the media? These questions remain central to contemporary debates about children and the media. This paper examines current patterns of television and radio consumption by New Zealand children in the context of household and peer environments. It explores parental attitudes towards and responsibilities for the protection of children in relation to broadcast media. The paper also aims to provide children with a voice by exploring their views about media content, and how they feel about the controls and regulations currently placed on their media consumption. Children do not constitute a unitary social category. They comprise a disparate group with diverse cultures and styles that must be examined from within. Rather than treating and studying children as inferior and underdeveloped beings, it is important to identify children as individual social actors (Smith, Taylor & Gollop, 2000). Children are often viewed as passive, invisible and irrational. However, a growing body of scholarship recognises that children are a heterogeneous group with valid and meaningful life experiences that must be accessed and analysed within specific cultural contexts (Burman, 1994; Atwool, 2000). In order to understand the media consumption habits of children and to explore issues of regulatory responsibility, it was essential to access children and their families. To this end, and within a New Zealand context, this paper enters relatively uncharted waters. To date, there are no other comprehensive New Zealand-based research projects that specifically identify the attitudes and behaviours of children in relation to broadcast media, and broadcasting standards.

Entrepreneurship in the public sector : new possibilities?

Previous research has described potential roles for entrepreneurs in public sector organisations as either closely related to corporate entrepreneurship, or as normative prescriptions regarding the importance of entrepreneurship in the public sector (Ireland, Covin & Kuratko, 2009: Morris & Jones, 1999). While some might argue that entrepreneurship in the public sector context is an oxymoron, recent studies have demonstrated that entrepreneurship in the public sector is alive and well (Currie, Humphreys, Ucbasaran & McManus 2008; Kim, 2010). Entrepreneurship in the public sector can take many forms and generate a range of benefits but to date less attention has been given to the potential to generate new public value (Moore, 1995). The purpose of this paper is to increase our knowledge and understanding of the types of strategies and activities the public sector is using to capture initiative, create new public value, and generate new economic activity for the benefit of multiple stakeholders. This paper explores entrepreneurship in one public sector context. Findings indicate that entrepreneurship and commercialisation is more likely to be encouraged in contexts where contestability in develop and exploit capabilities.

A gene encoding a new cold-active lipase from an Antarctic isolate of Penicillium expansum

Cold-active lipases are of significant interest as biocatalysts in industrial processes. We have identified a lipase that displayed activity towards long carbon-chain-p-nitrophenyl substrates (C12–C18) at 25 °C from the culture supernatant of an Antarctic Penicillium expansum strain assigned P. expansum SM3. Zymography revealed a protein band of around 30 kDa with activity towards olive oil. DNA fragments of a lipase gene designated as lipPE were isolated from the genomic DNA of P. expansum SM3 by genomic walking PCR. Subsequently, the complete genomic lipPE gene was amplified using gene-specific primers designed from the 5′- and 3′-regions. Reverse transcription PCR was used to amplify the lipPE cDNA. The deduced amino acid sequence consisted of 285 residues that included a predicted signal peptide. Three peptides identified by LC/MS/MS analysis of the proteins in the culture supernatant of P. expansum were also present in the deduced amino acid sequence of the lipPE gene suggesting that this gene encoded the lipase identified by initial zymogram activity analysis. Full analysis of the nucleotide and the deduced amino acid sequences indicated that the lipPE gene encodes a novel P. expansum lipase. The lipPE gene was expressed in E. coli for further characterization of the enzyme with a view of assessing its suitability for industrial applications.

Written in code : diversity and the new genetics

Modern genetic research holds out the promise of a bold new future in which humanity has identified and conquered the genetic roots of many diseases. Genetic science also promises to shed light on who we are, what it is that makes us tick, what it is that makes us the way we are — in short, what it is that makes us human. Yet while genetics are a potential saviour (saving us from disease), it also appears as a threat that at the extremes appears to be the stuff of our worst nightmares, such as the prospect, probably more imagined than real, of rows of cloned individuals. The new genetics hold out the promise that through genetics we will be able to determine what we are, a promise that is simultaneously appealing and terrifying. This chapter discusses the cloning of people and parts, the law’s response to cloning, genetics and diversity, a framework for law reform.

Ozonolysis of phospholipid double bonds during electrospray ionization : A new tool for structure determination

Phospholipids are the key structural component of cell membranes, and recent advances in electrospray ionization mass spectrometry provide for the fast and efficient analysis of these compounds in biological extracts.1-3 The application of electrospray ionization tandem mass spectrometry (ESI-MS/MS) to phospholipid analysis has demonstrated several key advantages over the more traditional chromatographic methods, including speed and greater structural information.4 For example, the ESI-MS/MS spectrum of a typical phospholipidsparticularly in negative ion modesreadily identifies the carbon chain length and the degree of unsaturation of each of the fatty acids esterified to the parent molecule.5 A critical limitation of conventional ESI-MS/MS analysis, however, is the inability to uniquely identify the position of double bonds within the fatty acid chains. This is especially problematic given the importance of double bond position in determining the biological function of lipid classes.6 Previous attempts to identify double bond position in intact phospholipids using mass spectrometry employ either MS3 or offline chemical derivatization.7-11 The former method requires specialized instrumentation and is rarely applied, while the latter methods suffer from complications inherent in sample handling prior to analysis. In this communication we outline a novel on-line approach for the identification of double bond position in intact phospholipids. In our method, the double bond(s) present in unsaturated phospholipids are cleaved by ozonolysis within the ion source of a conventional ESI mass spectrometer to give two chemically induced fragment ions that may be used to unambiguously assign the position of the double bond. This is achieved by using oxygen as the electrospray nebulizing gas in combination with high electrospray voltages to initiate the formation of an ozoneproducing.

New challenges for old laws? The development of e-health in Australia

Increasing role of electronic health care in Australia - possibilities of e-health in terms of provider-to-consumer initiatives and of business-to-business initiatives - challenges of e-health in the context of existing laws and recent reforms - assessment of the adequacy of existing laws to meet the challenges posed by e-health

Creativity management : the new challenge for BPM

Besides classical criteria such as cost and overall organizational efficiency, an organization’s ability to being creative and to innovate is of increasing importance in markets that are overwhelmed with commodity products and services. Business Process Management (BPM) as an approach to model, analyze, and improve business processes has been successfully applied not only to enhance performance and reduce cost but also to facilitate business imperatives such as risk management and knowledge management. Can BPM also facilitate the management of creativity? We can find many examples where enterprises unintentionally reduced or even killed creativity and innovation for the sake of control, performance, and cost reduction. Based on the experiences we have made within case studies with organizations from the creative industries (film industry, visual effects production, etc.,) we believe that BPM can be a facilitator providing the glue between creativity management and well-established business principles. In this article we introduce the notions of creativity-intensive processes and pockets of creativity as new BPM concepts. We further propose a set of exemplary strategies that enable process owners and process managers to achieve creativity without sacrificing creativity. Our aim is to set the baseline for further discussions on what we call creativity-oriented BPM.

Commissioning of a new commercial plastic scintillator system for radiotherapy

Introduction Since 1992 there have been several articles published on research on plastic scintillators for use in radiotherapy. Plastic scintillators are said to be tissue equivalent, temperature independent and dose rate independent [1]. Although their properties were found to be promising for measurements in megavoltage X-ray beams there were some technical difficulties with regards to its commercialisation. Standard Imaging has produced the first commercial system which is now available for use in a clinical setting. The Exradin W1 scintillator device uses a dual fibre system where one fibre is connected to the Plastic Scintillator and the other fibre only measures Cerenkov radiation [2]. This paper presents results obtained during commissioning of this dosimeter system. Methods All tests were performed on a Novalis Tx linear accelerator equipped with a 6 MV SRS photon beam and conventional 6 and 18 MV X-ray beams. The following measurements were performed in a Virtual Water phantom at a depth of dose maximum. Linearity: The dose delivered was varied between 0.2 and 3.0 Gy for the same field conditions. Dose rate dependence: For this test the repetition rate of the linac was varied between 100 and 1,000 MU/min. A nominal dose of 1.0 Gy was delivered for each rate. Reproducibility: A total of five irradiations for the same setup. Results The W1 detector gave a highly linear relationship between dose and the number of Monitor Units delivered for a 10 9 10 cm2 field size at a SSD of 100 cm. The linearity was within 1 % for the high dose end and about 2 % for the very low dose end. For the dose rate dependence, the dose measured as a function of repetition the rate (100–1,000 MU/min) gave a maximum deviation of 0.9 %. The reproducibility was found to be better than 0.5 %. Discussion and conclusions The results for this system look promising so far being a new dosimetry system available for clinical use. However, further investigation is needed to produce a full characterisation prior to use in megavoltage X-ray beams.

A new plasmid display technology for the in vitro selection of functional phenotype-genotype linked proteins

Background Display technologies which allow peptides or proteins to be physically associated with the encoding DNA are central to procedures which involve screening of protein libraries in vitro for new or altered function. Here we describe a new system designed specifically for the display of libraries of diverse, functional proteins which utilises the DNA binding protein nuclear factor κB (NF-κB) p50 to establish a phenotype-genotype link between the displayed protein and the encoding gene. Results A range of model fusion proteins to either the amino- or carboxy-terminus of NF-κB p50 have been constructed and shown to retain the picomolar affinity and DNA specificity of wild-type NF-κB p50. Through use of an optimal combination of binding buffer and DNA target sequence, the half-life of p50-DNA complexes could be increased to over 47 h, enabling the competitive selection of a variety of protein-plasmid complexes with enrichment factors of up to 6000-fold per round. The p50-based plasmid display system was used to enrich a maltose binding protein complex to homogeneity in only three rounds from a binary mixture with a starting ratio of 1:108 and to enrich to near homogeneity a single functional protein from a phenotype-genotype linked Escherichia coli genomic library using in vitro functional selections. Conclusions A new display technology is described which addresses the challenge of functional protein display. The results demonstrate that plasmid display is sufficiently sensitive to select a functional protein from large libraries and that it therefore represents a useful addition to the repertoire of display technologies.

Ray’s night out : A new iPhone app for addressing alcohol misuse in young people

Up to 30% of young people drink at risky levels at least weekly. Yet, many do not view their alcohol use as problematic and focus only on its enjoyment and socialization benefits. Innovative, youth-friendly and highly accessible ways of delivering preventative health messages are required. This paper describes the design, development and prototype testing of ‘Ray’s Night Out’ a new iPhone application for promoting harm minimisation and controlled drinking strategies in young people. Two participatory design workshops were conducted with 5 young people to explore how technology could be used to enhance a good night out drinking. Four existing iPhone alcohol apps were reviewed. Five young people conducted initial prototype testing to refine app content and interface design. Final prototype testing was conducted with 10 young people. Prototype testing indicated young people had a very positive response to the Ray animated character and rated the app highly on aesthetics, engagement, content, functionality, usefulness and youth relevance. The Ray app provides a youth friendly approach to addressing alcohol misuse in young people. The impact of the Ray app on young people’s alcohol use knowledge, attitudes and behaviours is currently being evaluated.

The Mobile Application Rating Scale (MARS): A new tool to measure the quality of health mobile applications

Smartphone technology provides free or inexpensive access to mental health and wellbeing resources. As a result the use of mobile applications for these purposes has increased significantly in recent years. Yet, there is currently no app quality assessment alternative to the popular ‘star’-ratings, which are often unreliable. This presentation describes the development of the Mobile Application Rating Scale (MARS) a new measure for classifying and rating the quality of mobile applications. A review of existing literature on app and web quality identified 25 published papers, conference proceedings, and online resources (published since 1999), which identified 372 explicit quality criteria. Qualitative analysis identified five broad categories of app quality rating criteria: engagement, functionality, aesthetics, information quality, and overall satisfaction, which were refined into the 23-item MARS. Independent ratings of 50 randomly selected mental health and wellbeing mobile apps indicated the MARS had excellent levels of internal consistency (α = 0.92) and inter-rater reliability (ICC = 0.85). The MARS provides practitioners and researchers with an easy-to-use, simple, objective and reliable tool for assessing mobile app quality. It also provides mHealth professionals with a checklist for the design and development of high quality apps.