Safety enhancement of water-filled road safety barrier using interaction of composite materials

Road safety barriers are used to redirect traffic at roadside work-zones. When filled with water, these barriers are able to withstand low to moderate impact speeds up to 50kmh-1. Despite this feature, Portable Water-filled barriers (PWFB) face challenges such as large lateral displacements, tearing and breakage during impact; especially at higher speeds. This study explores the use of composite action to enhance the crashworthiness of PWFBs and enable their usage at higher speeds. Initially, energy absorption capability of water in PWFB is investigated. Then, composite action of the PWFB with the introduction of steel frame is considered to evaluate its enhanced impact performance. Findings of the study show that the initial height of the impact must be lower than the free surface level of water in a PWFB in order for the water to provide significant crash energy absorption. In general, an impact of a road barrier with 80% filled is a good estimation. Furthermore, the addition of a composite structure greatly reduces the probability of tearing by decreasing the strain and impact energy transferred to the shell container. This allows the water to remain longer in the barrier to absorb energy via inertial displacements and sloshing response. Information from this research will aid in the design of new generation roadside safety structures aimed to increase safety in modern roadways.

Use of thermal imaging in sports medicine research : a short report

The assessment of skin temperature (Tsk) in athletic therapy and sports medicine research is an extremely important physiological outcome measure.Various methodsof recording Tsk, including thermistors, thermocouples and thermocrons are currently being used for research purposes. These techniques are constrained by their wires limiting the freedom of the subject, slow response times, and/or sensors falling off. Furthermore, as these products typically are directly attached to the skin and cover the measurement site, their validity may be questionable.This manuscript addresses the use and potential benefits of using thermal imaging (TI) in sport medicine research.Non-contact infrared TI offers a quick, non-invasive, portable and athlete-friendly method of assessing Tsk. TI is a useful Tsk diagnostic tool that has potential to be an integral part of sport medicine research in the future. Furthermore, as the technique is non-contact it has several advantages over existing methods of recording skin temperature

Children exposure assessment to ultrafine particles and black carbon: The role of transport and cooking activities

An accurate evaluation of the airborne particle dose-response relationship requires detailed measurements of the actual particle concentration levels that people are exposed to, in every microenvironment in which they reside. The aim of this work was to perform an exposure assessment of children in relation to two different aerosol species: ultrafine particles (UFPs) and black carbon (BC). To this purpose, personal exposure measurements, in terms of UFP and BC concentrations, were performed on 103 children aged 8-11 years (10.1 ± 1.1 years) using hand-held particle counters and aethalometers. Simultaneously, a time-activity diary and a portable GPS were used to determine the children’s daily time-activity pattern and estimate their inhaled dose of UFPs and BC. The median concentration to which the study population was exposed was found to be comparable to the high levels typically detected in urban traffic microenvironments, in terms of both particle number (2.2×104 part. cm-3) and BC (3.8 μg m-3) concentrations. Daily inhaled doses were also found to be relatively high and were equal to 3.35×1011 part. day-1 and 3.92×101 μg day-1 for UFPs and BC, respectively. Cooking and using transportation were recognized as the main activities contributing to overall daily exposure, when normalized according to their corresponding time contribution for UFPs and BC, respectively. Therefore, UFPs and BC could represent tracers of children exposure to particulate pollution from indoor cooking activities and transportation microenvironments, respectively.

Safety enhancement of water-filled road safety barrier using interaction of composite materials

Road safety barriers are used to redirect traffic at roadside work-zones. When filled with water, these barriers are able to withstand low to moderate impact speeds up to 50kmh-1. Despite this feature, there are challenges when using portable water-filled barriers (PWFBs) such as large lateral displacements as well as tearing and breakage during impact, especially at higher speeds. In this study, the authors explore the use of composite action to enhance the crashworthiness of PWFBs and enable their use at higher speeds. Initially, we investigated the energy absorption capability of water in PWFB. Then, we considered the composite action of a PWFB with the introduction of a steel frame to evaluate its impact on performance. Findings of the study show that the initial height of impact must be lower than the free surface level of water in a PWFB for the water to provide significant crash energy absorption. In general, impact of a road barrier that is 80% filled is a good estimation. Furthermore, the addition of a composite structure greatly reduces the probability of tearing by decreasing the strain and impact energy transferred to the shell container. This allows the water to remain longer in the barrier to absorb energy via inertial displacement and sloshing response. Information from this research will aid in the design of next generation roadside safety structures aimed to increase safety on modern roadways.

The Indigenous digital collectif : the case among the iTadian of Northern Philippines

This paper reports on an adaptation of Callon and Law’s (1995) hybrid collectif derived from research conducted on the usage of mobile phones and internet technologies among the iTadian indigenous people of the Cordillera region, northern Philippines. Results brings to light an indigenous digital collectif—an emergent effect from the translation of both human and non-human heterogeneous actors as well as pre-existent networks, such as: traditional knowledge and practices, kinship relations, the traditional exchange of goods, modern academic requisites, and advocacies for indigenous rights. This is evinced by the iTadian’s enrolment of internet and mobile phone technologies. Examples include: treating these technologies as an efficient communicative tool, an indicator of well-being, and a portable extension of affective human relationships. Alternatively, counter-enrolment strategies are also at play, which include: establishing rules of acceptable use on SMS texting and internet access based on traditional notions of discretion, privacy, and the customary treatment of the dead. Within the boundaries of this digital collectif reveal imbrications of pre-existing networks like traditional customs, the kinship system across geophysical boundaries, the traditional exchange of mail and other goods, and the advocacy of indigenous rights. These imbrications show that the iTadian digital collectif fluently configures itself to a variety of networked ontologies without losing its character.

A class E resonant inverter for use as electronic fluorescent lamp ballast

Class E Resonant Inverters are theoretically capable of delivering any power to a load and achieve 100% efficiency at any frequency of operation. In practice efficiency in the “high 90's” can be achieved into megahertz frequencies regardless of inverter output powers. The topology also allows the manipulation of output power through sub-optimal operation, with a negligible efficiency penalty. The 24W inverter discussed in this paper was specifically designed to harness the benefits, and discuss the shortcomings, of the Class E topology for use in the growing market for portable, battery powered lighting. It exhibits a peak recorded power efficiently of over 98%, and a conservatively measured efficiency of 95% across a range of dimming settings.

Sense-making across space and time : implications for the organization and findability of information

This paper presents the results from a study of information behaviors, with specific focus on information organisation-related behaviours conducted as part of a larger daily diary study with 34 participants. The findings indicate that organization of information in everyday life is a problematic area due to various factors. The self-evident one is the inter-subjectivity between the person who may have organized the information and the person looking for that same information (Berlin et. al., 1993). Increasingly though, we are not just looking for information within collections that have been designed by someone else, but within our own personal collections of information, which frequently include books, electronic files, photos, records, documents, desktops, web bookmarks, and portable devices. The passage of time between when we categorized or classified the information, and the time when we look for the same information, poses several problems of intra-subjectivity, or the difference between our own past and present perceptions of the same information. Information searching, and hence the retrieval of information from one's own collection of information in everyday life involved a spatial and temporal coordination with one's own past selves in a sort of cognitive and affective time travel, just as organizing information is a form of anticipatory coordination with one's future information needs. This has implications for finding information and also on personal information management.

Distributed low-power image processing in wireless sensor networks for intelligent video surveillance applications

Distributed Wireless Smart Camera (DWSC) network is a special type of Wireless Sensor Network (WSN) that processes captured images in a distributed manner. While image processing on DWSCs sees a great potential for growth, with its applications possessing a vast practical application domain such as security surveillance and health care, it suffers from tremendous constraints. In addition to the limitations of conventional WSNs, image processing on DWSCs requires more computational power, bandwidth and energy that presents significant challenges for large scale deployments. This dissertation has developed a number of algorithms that are highly scalable, portable, energy efficient and performance efficient, with considerations of practical constraints imposed by the hardware and the nature of WSN. More specifically, these algorithms tackle the problems of multi-object tracking and localisation in distributed wireless smart camera net- works and optimal camera configuration determination. Addressing the first problem of multi-object tracking and localisation requires solving a large array of sub-problems. The sub-problems that are discussed in this dissertation are calibration of internal parameters, multi-camera calibration for localisation and object handover for tracking. These topics have been covered extensively in computer vision literatures, however new algorithms must be invented to accommodate the various constraints introduced and required by the DWSC platform. A technique has been developed for the automatic calibration of low-cost cameras which are assumed to be restricted in their freedom of movement to either pan or tilt movements. Camera internal parameters, including focal length, principal point, lens distortion parameter and the angle and axis of rotation, can be recovered from a minimum set of two images of the camera, provided that the axis of rotation between the two images goes through the camera's optical centre and is parallel to either the vertical (panning) or horizontal (tilting) axis of the image. For object localisation, a novel approach has been developed for the calibration of a network of non-overlapping DWSCs in terms of their ground plane homographies, which can then be used for localising objects. In the proposed approach, a robot travels through the camera network while updating its position in a global coordinate frame, which it broadcasts to the cameras. The cameras use this, along with the image plane location of the robot, to compute a mapping from their image planes to the global coordinate frame. This is combined with an occupancy map generated by the robot during the mapping process to localised objects moving within the network. In addition, to deal with the problem of object handover between DWSCs of non-overlapping fields of view, a highly-scalable, distributed protocol has been designed. Cameras that follow the proposed protocol transmit object descriptions to a selected set of neighbours that are determined using a predictive forwarding strategy. The received descriptions are then matched at the subsequent camera on the object's path using a probability maximisation process with locally generated descriptions. The second problem of camera placement emerges naturally when these pervasive devices are put into real use. The locations, orientations, lens types etc. of the cameras must be chosen in a way that the utility of the network is maximised (e.g. maximum coverage) while user requirements are met. To deal with this, a statistical formulation of the problem of determining optimal camera configurations has been introduced and a Trans-Dimensional Simulated Annealing (TDSA) algorithm has been proposed to effectively solve the problem.

Experimental and numerical study of water-filled road safety barriers

Portable water-filled road barriers (PWFB) are roadside structures placed on temporary construction zones to separate work site from moving traffic. Recent changes in governing standards require PWFB to adhere to strict compliance in terms of lateral displacement of the road barriers and vehicle redirectionality. Actual road safety barrier test can be very costly, thus researchers resort to Finite Element Analysis (FEA) in the initial designs phase prior to real vehicle test. There has been many research conducted on concrete barriers and flexible steel barriers using FEA, however not many is done pertaining to PWFB. This research probes a new method to model joint mechanism in PWFB. Two methods to model the joining mechanism are presented and discussed in relation to its practicality and accuracy to real work applications. Moreover, the study of the physical gap and mass of the barrier was investigated. Outcome from this research will benefit PWFB research and allow road barrier designers better knowledge in developing the next generation of road safety structures.

Fluid-structure interaction analysis of full scale vehicle-barrier impact using coupled SPH-FEA

Portable water-filled barriers (PWFB) are roadside structures used to separate moving traffic from work-zones. Numerical PWFB modelling is preferred in the design stages prior to actual testing. This paper aims to study the fluid-structure interaction of PWFB under vehicular impact using several methods. The strategy to treat water as non-structural mass was proposed and the errors were investigated. It was found that water can be treated with the FEA-NSM model for velocities higher than 80kmh-1. However, full SPH/FEA model is still the best treatment for water and necessary for lower impact velocities. The findings in this paper can be used as guidelines for modelling and designing PWFB.

Tissue viability imaging of skin microcirculation following exposure to whole body cryotherapy (-110°C) and cold water immersion (8°C)

Cryotherapy is currently used in various clinical, rehabilitative, and sporting settings. However, very little is known regarding the impact of cooling on the microcirculatory response. Objectives: The present study sought to examine the influence of two commonly employed modalities of cryotherapy, whole body cryotherapy (WBC; -110°C) and cold water immersion(CWI; 8±1°C), on skin microcirculation in the mid- thigh region. Methods: The skin area examined was a 3 × 3 cm located between the most anterior aspect of the inguinal fold and the patella. Following 10 minutes of rest, 5 healthy, active males were exposed to either WBC for 3 minutes or CWI for 5 minutes in a randomised order. Volunteers lay supine for five minutes after treatment, in order to monitor the variation of red blood cell (RBC) concentration in the region of interest for a duration of 40 minutes. Microcirculation response was assessed using a non-invasive, portable instrument known as a Tissue Viability imaging system. After a minimum of seven days, the protocol was repeated. Subjective assessment of the volunteer’s thermal comfort and thermal sensation was also recorded. Results: RBC was altered following exposure to both WBC and CWI but appeared to stabilise approximately 35 minutes after treatments. Both WBC and CWI affected thermal sensation (p < 0.05); however no betweengroup differences in thermal comfort or sensation were recorded (p > 0.05). Conclusions: As both WBC and CWI altered RBC, further study is necessary to examine the mechanism for this alteration during whole body cooling.

Innovation & workplace culture in the Australian interactive entertainment industry : the Halfbrick story

A recent success story of the Australian videogames industry is Brisbane based Halfbrick Studios, developer of the hit game for mobile devices, Fruit Ninja. Halfbrick not only survived the global financial crisis and an associated downturn in the Australian industry, but grew strongly, moving rapidly from developing licensed properties for platforms such as Game Boy Advance, Nintendo DS, and Playstation Portable (PSP) to becoming an independent developer and publisher of in-house titles, generating revenue both through App downloads and merchandise sales. Amongst the reasons for Halfbrick’s success is their ability to adaptively transform by addressing different technical platforms, user dynamics, business models and market conditions. Our ongoing case-study research from 2010 into Halfbrick’s innovation processes, culminating with some 10 semi-structured interviews with senior managers and developers, has identified a strong focus on workplace organisational culture, with staff reflecting that the company is a flat, team-based organisation devolving as much control as possible to the development teams directly, and encouraging a work-life balance in which creativity can thrive. The success of this strategy is evidenced through Halfbrick’s low staff turnover; amongst our interviewees most of the developers had been with the company for a number of years, with all speaking positively of the workplace culture and sense of creative autonomy they enjoyed. Interviews with the CEO, Shainiel Deo, and team leaders highlighted the autonomy afforded to each team and the organisation and management of the projects on which they work. Deo and team leaders emphasised the collaboration and communication skills they require in the developers that they employ, and that these characteristics were considered just as significant in hiring decisions as technical skills. Halfbrick’s developers celebrate their workplace culture and insist it has contributed to their capacity for innovation and to their commercial success with titles such as Fruit Ninja. This model of organisational management is reflected in both Stark’s (2009) idea of heterarchy, and Neff’s (2012) concept of venture labour, and provides a different perspective on the industry than the traditional political economy critique of precarious labour exploited by gaming conglomerates. Nevertheless, throughout many of the interviews and in our informal discussions with Halfbrick developers there is also a sense that this rewarding culture is quite tenuous and precarious in the context of a rapidly changing and uncertain global videogames industry. Whether such a workplace culture represents the future of the games industry, or is merely a ‘Prague Spring’ before companies such as Halfbrick are swallowed by traditional players’ remains to be seen. However, as the process of rapid and uncertain transformation plays out across the videogames industry, it is important to pay attention to emerging modes of organisation and workplace culture, even whilst they remain at the margins of the industry. In this paper we investigate Halfbrick’s workplace culture and ask how sustainable is this kind of rewarding and creative workplace?

Business Innovation and Disruption in Publishing

This is the first volume in a book series examining how organizations in the creative industries respond to disruptive change and how they themselves generate business innovations. The aspiration of this book series is to understand some of the common forces behind the disruptions occurring in so many creative industries today and identifying the most promising strategies and responses by organizations to create new value propositions, business models and business practices that can enable these industry participants to cope with and eventually thrive as their industries and sectors are transformed. The chapters included in the volume examine the processes of disruption and transformation due to the technology of the Internet, social forces driven by social media, the development of new portable digital devices with greater capabilities and smaller size, the decreasing costs of new information, and the creation of new business models and forms of intellectual property ownership rights for a digitized industry. The context for this volume is the publishing industries, understood as the industries for the publishing of fiction and non-fiction books, academic literature, consumer as well as trade magazines, and daily newspapers. This volume includes chapters by an internationally diverse array of media scholars whose chapters provide insights into these phenomena in Eastern Europe, Finland, France, Germany, Norway, Portugal, Russia, and the United States, using different methodological frameworks including, but not limited to, surveys, in-depth interviews and multiple-case studies. One gap that this book series seeks to fill is that between the study of business innovation and disruption by innovation scholars largely based in business school settings and similar studies by scholarly experts from non-business school disciplines, including the broader social sciences (e.g. sociology, political science, economic geography) and creative industry based professional school disciplines (e.g. architecture, communications, design, film making, journalism, media studies, performing arts, photography and television). Future volumes of this book series will examine disruption and business innovation in the film, video and photography sectors (volume two), the music sector (volume three) and interactive entertainment (volume four), with subsequent volumes focusing on the most relevant developments in creative industry business innovation and disruption that emerge.

HeatWave : a handheld 3D thermography system for energy auditing

Energy auditing is an effective but costly approach for reducing the long-term energy consumption of buildings. When well-executed, energy loss can be quickly identified in the building structure and its subsystems. This then presents opportunities for improving energy efficiency. We present a low-cost, portable technology called "HeatWave" which allows non-experts to generate detailed 3D surface temperature models for energy auditing. This handheld 3D thermography system consists of two commercially available imaging sensors and a set of software algorithms which can be run on a laptop. The 3D model can be visualized in real-time by the operator so that they can monitor their degree of coverage as the sensors are used to capture data. In addition, results can be analyzed offline using the proposed "Spectra" multispectral visualization toolbox. The presence of surface temperature data in the generated 3D model enables the operator to easily identify and measure thermal irregularities such as thermal bridges, insulation leaks, moisture build-up and HVAC faults. Moreover, 3D models generated from subsequent audits of the same environment can be automatically compared to detect temporal changes in conditions and energy use over time.

Sensitive methods for studying the environmental performance of protective coatings

The safe working lifetime of a structure in a corrosive or other harsh environment is frequently not limited by the material itself but rather by the integrity of the coating material. Advanced surface coatings are usually crosslinked organic polymers such as epoxies and polyurethanes which must not shrink, crack or degrade when exposed to environmental extremes. While standard test methods for environmental durability of coatings have been devised, the tests are structured more towards determining the end of life rather than in anticipation of degradation. We have been developing prognostic tools to anticipate coating failure by using a fundamental understanding of their degradation behaviour which, depending on the polymer structure, is mediated through hydrolytic or oxidation processes. Fourier transform infrared spectroscopy (FTIR) is a widely-used laboratory technique for the analysis of polymer degradation and with the development of portable FTIR spectrometers, new opportunities have arisen to measure polymer degradation non-destructively in the field. For IR reflectance sampling, both diffuse (scattered) and specular (direct) reflections can occur. The complexity in these spectra has provided interesting opportunities to study surface chemical and physical changes during paint curing, service abrasion and weathering, but has often required the use of advanced statistical analysis methods such as chemometrics to discern these changes. Results from our studies using this and related techniques and the technical challenges that have arisen will be presented.