ICT for blended learning Queensland University of Technology, Australia

This report focuses on blended learning within the Queensland University of Technology (QUT) which is one of Australia’s largest public universities. Although the university in its current format was established in 1989, it contains several previous institutions that can be traced to the earliest forms of technical and teacher education in Queensland in the 19th century (Kyle et al., 1999). The focal point of the report is the experience of QUT’s Faculty of Education which was formed from the amalgamation of several teacher training colleges servicing pre-school and kindergarten, primary and secondary teacher education. While the broader university currently employs approximately 4,000 staff and has about 40,000 students, QUT’s Faculty of Education employs around 170 staff and has approximately 5,000 enrolled students. The Faculty of Education at QUT is the largest provider of pre-service teacher education in Australia and is one of the largest producers of educational research. A major theme of the Faculty of Education is its focus on education and research that provides teachers, schools and educational authorities with practical solutions to the multifaceted issues facing contemporary education.

Determinants of driver vs. second row occupant posture modelling

Digital human modeling (DHM), as a convenient and cost-effective tool, is increasingly incorporated into product and workplace design. In product design, it is predominantly used for the development of driver-vehicle systems. Most digital human modeling software tools, such as JACK, RAMSIS and DELMIA HUMANBUILDER provide functions to predict posture and positions for drivers with selected anthropometry according to SAE (Society of Automotive Engineers) Recommended Practices and other ergonomics guidelines. However, few studies have presented 2nd row passenger postural information, and digital human modeling of these passenger postures cannot be performed directly using the existing driver posture prediction functions. In this paper, the significant studies related to occupant posture and modeling were reviewed and a framework of determinants of driver vs. 2nd row occupant posture modeling was extracted. The determinants which are regarded as input factors for posture modeling include target population anthropometry, vehicle package geometry and seat design variables as well as task definitions. The differences between determinants of driver and 2nd row occupant posture models are significant, as driver posture modeling is primarily based on the position of the foot on the accelerator pedal (accelerator actuation point AAP, accelerator heel point AHP) and the hands on the steering wheel (steering wheel centre point A-Point). The objectives of this paper are aimed to investigate those differences between driver and passenger posture, and to supplement the existing parametric model for occupant posture prediction. With the guide of the framework, the associated input parameters of occupant digital human models of both driver and second row occupant will be identified. Beyond the existing occupant posture models, for example a driver posture model could be modified to predict second row occupant posture, by adjusting the associated input parameters introduced in this paper. This study combines results from a literature review and the theoretical modeling stage of a second row passenger posture prediction model project.

The incorporation of web 2.0 into learning design : an implementation model from the perspectives of teachers and students

This paper summarises some of the recent studies on various types of learning approaches that have utilised some form of Web 2.0 services in curriculum design to enhance learning. A generic implementation model of this integration will then be presented to illustrate the overall learning implementation process. Recently, the integration of Web 2.0 technologies into learning curriculum has begun to get a wide acceptance among teaching instructors across various higher learning institutions. This is evidenced by numerous studies which indicate the implementation of a range of Web 2.0 technologies into their learning design to improve learning delivery. Moreover, recent studies also have shown that the ability of current students to embrace Web 2.0 technologies is better than students using existing learning technology. Despite various attempts made by teachers in relation to the integration, researchers have noted a lack of integration standard to help in curriculum design. The absence of this standard will restrict the capacity of Web 2.0 adaptation into learning and adding more the complexity to provide meaningful learning. Therefore, this paper will attempt to draw a conceptual integration model which is being generated to reflect how learning activities with some facilitation of Web 2.0 is currently being implemented. The design of this model is based on shared experiences by many scholars as well as feedback gathered from two separate surveys conducted on teachers and a group of 180 students. Furthermore, this paper also recognizes some key components that generally engage in the design of a Web 2.0 teaching and learning which need to be addressed accordingly. Overall, the content of this paper will be organised as follows. The first part of the paper will introduce the importance of Web 2.0 implementation in teaching and learning from the perspective of higher education institutions and those challenges surrounding this area. The second part summarizes related works done in this field and brings forward the concept of designing learning with the incorporation of Web 2.0 technology. The next part presents the results of analysis derived from the two student and teachers surveys on using Web 2.0 during learning activities. This paper concludes by presenting a model that reflects several key entities that may be involved during the learning design.

Using game technologies to improve the safety of construction plant operations

Many accidents occur world-wide in the use of construction plant and equipment, and safety training is considered by many to be one of the best approaches to their prevention. However, current safety training methods/tools are unable to provide trainees with the hands-on practice needed. Game technology-based safety training platforms have the potential to overcome this problem in a virtual environment. One such platform is described in this paper - its characteristics are analysed and its possible contribution to safety training identified. This is developed and tested by means of a case study involving three major pieces of construction plant, which successfully demonstrates that the platform can improve the process and performance of the safety training involved in their operation. This research not only presents a new and useful solution to the safety training of construction operations, but illustrates the potential use of advanced technologies in solving construction industry problems in general.

Strategies to engage academics in assuring graduate attributes

Assurance of learning (AoL) is a predominant feature in both quality assurance and quality enhancement in higher education. The process may be used for program development, and to inform external accreditation and evaluation bodies. However, there is an obvious challenge in trying to get academic staff to buy into the benefits of the AoL process. This project conducted an audit across 25 Australian Business Schools. The majority of those interviewed stated that academic staff considered AoL to be extra work and viewed the process as a box ticking exercise for external bodies rather than sound educational practice. A change management process is required to promote the necessary cultural change to embed AoL into practice. This paper showcases some of the educational leadership strategies that have been successfully implemented across Australia to foster staff engagement in the AoL process. These include: strong senior management commitment and leadership demonstrating a constant and high level drive for staff engagement until AoL becomes an institutional norm; developing leadership and champions among unit and program level staff, to share practices and promote the benefits that come from engaging in the process; providing professional development opportunities to discuss and resolve difficulties and tensions around AoL; demonstrating success and effectiveness by selling staff on the evidence that AoL makes a difference; and making the process inclusive with academics collaborating in the development and implementation of the process.

Becoming professionals : partnerships reshaping preservice teachers’ transition to full-time teaching

While strengthened partnerships between University and Schools have been proposed in recent reviews of teacher education (House of Representative Standing Committee on Education and Vocational Training, 2007; Caldwell & Sutton, 2010; Donaldson, 2010), there is a need to understand the benefits and challenges for participants of these partnerships. The Teacher Education Centre of Excellence (TECE) in this study is a preservice teacher preparation partnership between a Queensland University, Queensland Department of Education, Training and Employment (DETE) and an Education Queensland school. It was established in response to a mandated reform within the Improving Teacher Quality National Partnership Agreement (Department of Education Employment and Workplace Relations, 2011). High-achieving Bachelor of Education preservice teachers apply to be part of the 18-month program in the third year of their four-year Education degree. These preservice teachers experience mentoring in partner schools in addition to course work designed and delivered by a DETE appointed Head of Mentoring and a university academic. On completion of the program, graduates will be appointed to South West Queensland rural and remote Education Queensland schools. This paper analyses participant perspectives from the first phase of this partnership in particular identifying the benefits and challenges experienced by the preservice teachers and the leaders of the program from the participating institutions. A sociocultural theoretical perspective (Wenger, 1998) informed the analysis examining how preservice teachers experience a sense of becoming a professional teacher within a specific employment context. Data from interviews with 6 pre-service teachers and 8 program leaders were analysed inductively through coding of interview records. Findings indicate the importance of strong relationships and opportunity for reciprocal learning through ongoing professional conversations as contexts for preservice teachers to develop an identity as an emerging professional. This research has significance for the ongoing development of this partnership as well as informing the principles for the design of future similar partnerships.

A protocol for the rapid isolation of full geminivirus genomes from dried plant tissue

A high-throughput method of isolating and cloning geminivirus genomes from dried plant material, by combining an Extract-n-Amp™-based DNA isolation technique with rolling circle amplification (RCA) of viral DNA, is presented. Using this method an attempt was made to isolate and clone full geminivirus genomes/genome components from 102 plant samples, including dried leaves stored at room temperature for between 6 months and 10 years, with an average hands-on-time to RCA-ready DNA of 15 min per 20 samples. While storage of dried leaves for up to 6 months did not appreciably decrease cloning success rates relative to those achieved with fresh samples, efficiency of the method decreased with increasing storage time. However, it was still possible to clone virus genomes from 47% of 10-year-old samples. To illustrate the utility of this simple method for high-throughput geminivirus diversity studies, six Maize streak virus genomes, an Abutilon mosaic virus DNA-B component and the DNA-A component of a previously unidentified New Word begomovirus species were fully sequenced. Genomic clones of the 69 other viruses were verified as such by end sequencing. This method should be extremely useful for the study of any circular DNA plant viruses with genome component lengths smaller than the maximum size amplifiable by RCA. © 2008 Elsevier B.V. All rights reserved.

Design Integration Workshops 2012

Businesses will learn how design integration can increase growth and productivity, and gain a sustainable competitive advantage. This hands on two-day workshop will demystify design thinking and introduce you to both theory and practice for the latest, world-class design integration methods. Design integration will transform your business and boost resilience in the face of current global, social and economic challenges.

Navigating the muddy waters of the research into single sex classrooms in co-educational middle years settings

Establishing single sex classes within co-educational sites is an option that Australian schools are again exploring. To date Australia has experienced three ‘waves’ of interest in establishing single sex classes, the first focused on equitable education opportunities for girls (Alloway & Gilbert, 1997), the second centered on boys’ literacy and engagement (Gilbert & Gilbert, 1998) and this current wave focuses on perceived difference between the sexes in co-educational classrooms (Protheroe, 2009; Gurian, Stevens & Daniels, 2009). With the intersection of middle schooling movement, focusing on learner centered classrooms (Pendergast & Bahr, 2010) and current educational agendas aimed at improving student performance and measurable learning outcomes (Ministerial Council on Education, Employment, Training and Youth Affairs, 2008), it is understandable that schools are exploring such student grouping options. However, after thirty years of international research into the efficacy of single sex classes in co-educational settings, the results still remain unclear. This paper seeks to navigate the ‘muddy waters’ of this body of research and suggests a framework to help guide school communities through the decision-making process associated with considering single sex classes.

Dichotomy in the design studio 2.0 : adapting to new blended learning environments

In a study aimed at better understanding how students adapt to new blended studio learning environments, all undergraduate and masters of architecture students at a large school of architecture in Australia, learned a semester of architectural design in newly renovated, technology embedded, design studio environments. The renovations addressed the lessons learned from a 2011 pilot study of a second year architectural design studio learned in a high technology embedded prototype digital laboratory. The new design studios were purpose designed for the architecture students and adapted Student-Centred Active Learning Environment for Undergraduate Programs design principles. At the end of the semester, the students completed a questionnaire about their experiences of learning in the new design studio environments. Using a dual method qualitative approach, the questionnaire data were coded and extrapolated using both thematic analysis and grounded theory methodology. The results from these two approaches were compared, contrasted and finally merged, to reveal five distinct emerging themes, which were instrumental in offering resistance or influencing adaptation to, the new blended studio learning environments. This paper reports on the study, discusses the major contributors to resistance and adaptation, and proposes points for consideration when renovating or designing new blended studio learning environments. This research extends the 2011 pilot study by the same authors: ‘Dichotomy in the design studio: Adapting to new blended learning environments’.

Fundamentals of business process management

Encompasses the whole BPM lifecycle, including process identification, modelling, analysis, redesign, automation and monitoring Class-tested textbook complemented with additional teaching material on the accompanying website Covers both relevant conceptual background, industrial standards and actionable skills Business Process Management (BPM) is the art and science of how work should be performed in an organization in order to ensure consistent outputs and to take advantage of improvement opportunities, e.g. reducing costs, execution times or error rates. Importantly, BPM is not about improving the way individual activities are performed, but rather about managing entire chains of events, activities and decisions that ultimately produce added value for an organization and its customers. This textbook encompasses the entire BPM lifecycle, from process identification to process monitoring, covering along the way process modelling, analysis, redesign and automation. Concepts, methods and tools from business management, computer science and industrial engineering are blended into one comprehensive and inter-disciplinary approach. The presentation is illustrated using the BPMN industry standard defined by the Object Management Group and widely endorsed by practitioners and vendors worldwide. In addition to explaining the relevant conceptual background, the book provides dozens of examples, more than 100 hands-on exercises – many with solutions – as well as numerous suggestions for further reading. The textbook is the result of many years of combined teaching experience of the authors, both at the undergraduate and graduate levels as well as in the context of professional training. Students and professionals from both business management and computer science will benefit from the step-by-step style of the textbook and its focus on fundamental concepts and proven methods. Lecturers will appreciate the class-tested format and the additional teaching material available on the accompanying website fundamentals-of-bpm.org.

Disaster strikes, then what? Using evaluation in narrative driven (oral history & digital storytelling) community-based projects

In 2011 Queensland suffered both floods and cyclones, leaving residents without homes and their communities in ruins (2011). This paper presents how researchers from QUT, who are also members of the Oral History Association of Australia (OHAA) Queensland’s chapter, are using oral history, photographs, videography and digital storytelling to help heal and empower rural communities around the state and how evaluation has become a key element of our research. QUT researchers ran storytelling workshops in the capital city of Brisbane i early 2011, after the city suffered sever flooding. Cyclone Yasi then struck the town of Cardwell (in February 2011) destroying their historical museum and recording equipment. We delivered an 'emergency workshop', offering participants hands on use of the equipment, ethical and interviewing theory, so that the community could start to build a new collection. We included oral history workshops as well as sessions on how best to use a video camera, digital camera and creative writing sessions, so the community would also know how to make 'products' or exhibition pieces out of the interviews they were recording. We returned six months later to conduct follow-up workshops and the material produced by and with the community had been amazing. More funding has now been secured to replicate audio/visual/writing workshops in other remote rural Queensland communities including Townsville, Mackay and Cunnamulla and Toowoomba in 2012, highlighting the need for a multi media approach, to leverage the most out of OH interviews as a mechanism to restore and promote community resilience and pride.

Studying in Cuba, returning home to work : experiences of graduates from the English-speaking Caribbean

Cuba’s higher education scholarship program has received little attention in the literature on education and development. In this chapter, I discuss themes that emerge from my interviews with graduates from English-speaking Caribbean countries who studied in Cuba, as well as Cuban educators, on the nature of their academic programs and their subsequent careers. This facilitates exploration of a number of questions, including the following: 1. How, in the perceptions of scholarship students and graduates, have they experienced the philosophy of combing study, practical work, and research in the tertiary education curriculum in Cuban universities? 2. What impact does studying in Cuba appear to have on graduates after they return to their home countries? 3. How does the experience of the graduates throw light on the relationship between tertiary education and national development?

Multiple Literacies Theory: Discourse, sensation, resonance and becoming

This thematic issue on education and the politics of becoming focuses on how a Multiple Literacies Theory (MLT) plugs into practice in education. MLT does this by creating an assemblage between discourse, text, resonance and sensations. What does this produce? Becoming AND how one might live are the product of an assemblage (May, 2005; Semetsky, 2003). In this paper, MLT is the approach that explores the connection between educational theory and practice through the lens of an empirical study of multilingual children acquiring multiple writing systems simultaneously. The introduction explicates discourse, text, resonance, sensation and becoming. The second section introduces certain Deleuzian concepts that plug into MLT. The third section serves as an introduction to MLT. The fourth section is devoted to the study by way of a rhizoanalysis. Finally, drawing on the concept of the rhizome, this article exits with potential lines of flight opened by MLT. These are becomings which highlight the significance of this work in terms of transforming not only how literacies are conceptualized, especially in minority language contexts, but also how one might live.

Teaching end-user remote online searching

The Queensland University of Technology (QUT) Library bas recently commenced teaching higher degree students to search online systems such as BRS, ORBIT and STN. The emphasis is on education rather than training. with students being required to familiarise themselves with system commands and database structures whilst receiving necessarily limited tutorial help. The teaching strategies used and problems encountered in the program are outlined. Student responses to the experience of learning to online search are discussed.