The concealed difficulties of aligning CRE decisions to corporate goals

Realisation of the importance of real estate asset strategic decision making has inspired a burgeoning corporate real estate management (CREM) literature. Much of this criticises the poor alignment between strategic business direction and the ‘enabling’ physical environment. This is based on the understanding that corporate real estate assets represent the physical resource base that supports business, and can either complement or impede that business. In the hope of resolving this problem, CRE authors advocate a deeper integration of strategic and corporate real estate decisions. However this recommendation appears to be based on a relatively simplistic theoretical approach to organization where decision-making tends to be viewed as a rationally managed event rather than a complex process. Defining decision making as an isolated event has led to an uncritical acceptance of two basic assumptions: ubiquitous, conflict-free rationality and profit maximisation. These assumptions have encouraged prescriptive solutions that clearly lack the sophistication necessary to come to grips with the complexity of the built and organizational environment. Alternatively, approaching CREM decision making from a more sophisticated perspective, such as that of the “Carnegie School”, leads to conceptualise it as a ‘process’, creating room for bounded rationality, multiple goals, intra-organizational conflict, environmental matching, uncertainty avoidance and problem searching. It is reasonable to expect that such an approach will result in a better understanding of the organizational context, which will facilitate the creation of organizational objectives, assist with the formation of strategies, and ultimately will aid decision.

Causing economic harm to property developers : damages for starting an incurably bad appeal?

A recent decision of the Queensland Court of Appeal involved an unusual statement of claim made on behalf of the developer of a proposed resort in Port Douglas. The decision is The Beach Club Port Douglas Pty Ltd v Page [2005] QCA 475. The issue The defendant had objected to a development application of the plaintiff developer and lodged an appeal in the Planning and Environment Court against the council decision granting a development permit. The main issue in the Planning and Environment Court was whether the site coverage of the proposed resort was excessive. In a separate action (the subject matter of the present appeal), the plaintiff developer claimed damages for ‘negligence’ alleging that the defendant had breached a duty of care not to appeal without properly or reasonably assessing whether the development qualified for a permit given that the resort qualified for the maximum allowable site coverage. It was alleged that the appeal lodged by the defendant in the Planning and Environment Court had no reasonable prospects of success and that any reasonable person properly advised would know, or ought reasonably to have known, that to be so. The defendant had been “put on notice” that the plaintiff would incur loss of $10,000 for every day there was a delay in starting construction of the resort. The claim made by the developer required the court to consider those circumstances where a person may lawfully and deliberately cause economic harm to another. Was a duty of care owed by the defendant for negligent conduct of litigation that caused economic loss to the plaintiff?

Cranes, claims and a statutory right of user

In larger developments there is potential for construction cranes to encroach into the airspace of neighbouring properties. To resolve issues of this nature, a statutory right of user may be sought under s 180 of the Property Law Act 1974 (Qld). Section 180 allows the court to impose a statutory right of user on servient land where it is reasonably necessary in the interests of effective use in any reasonable manner of the dominant land. Such an order will not be made unless the court is satisfied that it is consistent with public interest, the owner of the servient land can be adequately recompensed for any loss or disadvantage which may be suffered from the imposition and the owner of the servient land has refused unreasonably to agree to accept the imposition of that obligation. In applying the statutory provision, a key practical concern for legal advisers will be the basis for assessment of compensation. A recent decision of the Queensland Supreme Court (Douglas J) provides guidance concerning matters relevant to this assessment. The decision is Lang Parade Pty Ltd v Peluso [2005] QSC 112.

Mortgagee sale obligations tightened

The enactment of the Property Law (Mortgagor Protection) Amendment Act 2008 (Qld), means that the obligations of a mortgagee exercising power of sale or a receiver selling have been substantially tightened in Queensland. Background As explained in the explanatory notes accompanying the legislation, with current global economic and financial circumstances, there were concerns about the position of mortgagors when mortgagees exercised their powers of sale. The objective of the amending legislation was to protect the interests of mortgagors by strengthening the statutory provisions relating to the duty of the mortgagee exercising power of sale to take reasonable care to ensure the property is sold at market value. The amending legislation was urgently passed without any consultation process.

Probability distributed time delays: integrating spatial effects into temporal models

Background In order to provide insights into the complex biochemical processes inside a cell, modelling approaches must find a balance between achieving an adequate representation of the physical phenomena and keeping the associated computational cost within reasonable limits. This issue is particularly stressed when spatial inhomogeneities have a significant effect on system's behaviour. In such cases, a spatially-resolved stochastic method can better portray the biological reality, but the corresponding computer simulations can in turn be prohibitively expensive. Results We present a method that incorporates spatial information by means of tailored, probability distributed time-delays. These distributions can be directly obtained by single in silico or a suitable set of in vitro experiments and are subsequently fed into a delay stochastic simulation algorithm (DSSA), achieving a good compromise between computational costs and a much more accurate representation of spatial processes such as molecular diffusion and translocation between cell compartments. Additionally, we present a novel alternative approach based on delay differential equations (DDE) that can be used in scenarios of high molecular concentrations and low noise propagation. Conclusions Our proposed methodologies accurately capture and incorporate certain spatial processes into temporal stochastic and deterministic simulations, increasing their accuracy at low computational costs. This is of particular importance given that time spans of cellular processes are generally larger (possibly by several orders of magnitude) than those achievable by current spatially-resolved stochastic simulators. Hence, our methodology allows users to explore cellular scenarios under the effects of diffusion and stochasticity in time spans that were, until now, simply unfeasible. Our methodologies are supported by theoretical considerations on the different modelling regimes, i.e. spatial vs. delay-temporal, as indicated by the corresponding Master Equations and presented elsewhere.

A test vehicle for compliance with resilience requirements in index-based e-health systems

Increasingly, national and international governments have a strong mandate to develop national e-health systems to enable delivery of much-needed healthcare services. Research is, therefore, needed into appropriate security and reliance structures for the development of health information systems which must be compliant with governmental and alike obligations. The protection of e-health information security is critical to the successful implementation of any e-health initiative. To address this, this paper proposes a security architecture for index-based e-health environments, according to the broad outline of Australia’s National E-health Strategy and National E-health Transition Authority (NEHTA)’s Connectivity Architecture. This proposal, however, could be equally applied to any distributed, index-based health information system involving referencing to disparate health information systems. The practicality of the proposed security architecture is supported through an experimental demonstration. This successful prototype completion demonstrates the comprehensibility of the proposed architecture, and the clarity and feasibility of system specifications, in enabling ready development of such a system. This test vehicle has also indicated a number of parameters that need to be considered in any national indexed-based e-health system design with reasonable levels of system security. This paper has identified the need for evaluation of the levels of education, training, and expertise required to create such a system.

Examination of process to develop a framework for better implementation of quality practices in building projects

Quality, as well as project success, in construction projects should be capable of being regarded as the fulfillment of expectation of those contributors and stakeholders involved in such projects. Although a significant amount of quality practices have been introduced within the industry, establishment and attainment of reasonable levels of quality internationally in construction projects continues to be an ongoing problem. To date, some investigation into the introduction and improvement of quality practices and stakeholder management in the construction industry has been accomplished independently, but so far no major studies have been completed that examine comprehensively how quality management practices that particularly concentrate on the stakeholders’ perspective of quality can be used to contribute to final project quality outcomes. This paper aims to examine the process for development of a framework for better involvement of stakeholders in quality planning and practices and subsequently to contribute to higher quality outcomes within construction projects. Through extensive literature review it highlights various perceptions of quality, categorizes quality issues with particular focus on benefits and shortcomings and also examines stakeholders’ viewpoint of project quality in order to promote the improvement of outcomes throughout a project’s lifecycle. It proposes a set of arranged information as a basis for development of prospective framework which ultimately aims to improve project quality outcomes. The subsequent framework that will be developed from this research will provide project managers and owners with the required information and strategic direction to achieve their own and their stakeholders’ targets for implementation of quality practices and achievement of high quality outcomes on their future projects.

Critical gap estimation by numerical and statistical highest likelihood search

Many traffic situations require drivers to cross or merge into a stream having higher priority. Gap acceptance theory enables us to model such processes to analyse traffic operation. This discussion demonstrated that numerical search fine tuned by statistical analysis can be used to determine the most likely critical gap for a sample of drivers, based on their largest rejected gap and accepted gap. This method shares some common features with the Maximum Likelihood Estimation technique (Troutbeck 1992) but lends itself well to contemporary analysis tools such as spreadsheet and is particularly analytically transparent. This method is considered not to bias estimation of critical gap due to very small rejected gaps or very large rejected gaps. However, it requires a sufficiently large sample that there is reasonable representation of largest rejected gap/accepted gap pairs within a fairly narrow highest likelihood search band.

A proactive response to the mobbing problem : a guide for HR managers

This paper introduces the concept of workplace mobbing as a destructive organizational behaviour of psychological assaults perpetrated against the target causing them harm and loss of employment. The discussion is drawn from a three year Australian study of 212 self identified targets of workplace mobbing behaviours. The behaviours are typically covert with informal networks and friendship loyalties providing effective mechanisms for emotional abuse, including those arising from human resource management practices. This paper discusses the manipulation of informal sources of power, with the use of gossip, rumour, hearsay, and innuendo to discredit and demonise those targeted. The study explores some of the systemic reasons for these behaviours and identifies some of the contributing risk factors and suggests management practices that can minimise the harm caused.

Learning to act in uncertain environments : technical perspective

The problem of decision making in an uncertain environment arises in many diverse contexts: deciding whether to keep a hard drive spinning in a net-book; choosing which advertisement to post to a Web site visitor; choosing how many newspapers to order so as to maximize profits; or choosing a route to recommend to a driver given limited and possibly out-of-date information about traffic conditions. All are sequential decision problems, since earlier decisions affect subsequent performance; all require adaptive approaches, since they involve significant uncertainty. The key issue in effectively solving problems like these is known as the exploration/exploitation trade-off: If I am at a cross-roads, when should I go in the most advantageous direction among those that I have already explored, and when should I strike out in a new direction, in the hopes I will discover something better?

Stability and change

This special feature section of Journal of Management & Organization (Volume 17/1 - March 2011) sets out to widen understanding of the processes of stability and change in today's organizations, with a particular emphasis on the contribution of institutional approaches to organizational studies. Institutional perspectives on organization theory assume that rational, economic calculations, such as the maximization of profits or the optimization of resource allocation, are not sufficient to understand the behavior of organizations and their strategic choices. Institutionalists acknowledge the great uncertainty associated with the conduct of organizations and suggest that taken-for-granted values, beliefs and meanings within and outside organizations also play an important role in the determination of legitimate action.

Surrogacy and IVF

While in the past surrogacy was illegal in Queensland, since June 2010 the Surrogacy Act 2010 (Qld) (“the Act”) has made altruistic surrogacy arrangements lawful in Queensland. In addition, it provides a mechanism for transfer of legal parentage from the surrogate to the person(s) wishing to have a child (the intended parent(s)). Commercial surrogacy – where a payment, reward or other material benefit of advantage (other than the reimbursement of the “birth mother’s surrogacy costs” (s11 of the Act) is made for entering into a surrogacy arrangement – remains unlawful. The paramount guiding principle underpinning the Act is that of the wellbeing and best interests of a child born as a result of surrogacy. The Surrogacy Act 2010 (Qld) allows a single person or a couple (heterosexual or same sex couples) to enter into an agreement with a woman, and her partner (if she has one), to become pregnant with the intention that the child will be relinquished to the intended parent(s). The Act also provides a mechanism for the intended parent(s) to be legally recognised as the parent(s) of the child. In order for the intended parent(s) to be legally recognised (via a parentage order, discussed below) it must be shown that the surrogacy arrangement was entered into when all the parties were over 25 years of age and the intended parent(s) are male or, in a heterosexual or lesbian couple the female(s) are not likely to conceive or give birth to a healthy child due to medical reasons. The arrangement must be entered into before the surrogate becomes pregnant and all parties must have obtained independent legal advice and counselling about the proposed arrangement, and evidence of this is required at the time a parentage order is applied for. For the purposes of the Act it does not matter how the surrogate conceives the child or if the child is genetically related to the parties. During the period of the pregnancy, the surrogate has the right to manage her pregnancy in the way she wishes. Although she cannot profit from acting as a surrogate, section 11 states that she is entitled to surrogacy costs. These include, for example, reasonable medical costs related to pregnancy and the birth of the child; counselling and legal costs associated with the surrogacy arrangement; actual lost earnings because of leave taken during pregnancy or following birth and any reasonable travel expenses incurred. The surrogacy arrangement itself is not legally enforceable; however, obligations to pay a surrogate’s surrogacy costs are enforceable unless she chooses not to relinquish the child to the intending parents. While the Act does not specifically deal with the situation where the surrogate decides she is unprepared to relinquish the child to the intended parents, there have been examples where parties have entered into these kinds of arrangements, and the arrangements have become difficult. For example, the Family Court case of Re Evelyn (1998) FLC 92–807 involved a child born to a surrogate mother who decided not to surrender her. The child was the genetic child of the surrogate mother and the husband of the couple who had contracted with the surrogate mother. Both sets of parents brought proceedings in the court, seeking that the child live with them. In hearing the application, the court applied the paramount principle of the ‘best interests of the child’. The court made clear that there is no presumption in favour of the birth mother, although in this case the court found that the child may be better placed with the surrogate mother’s family.

Nanostructured mesoporous bioglass coated zirconia scaffolds for bone tissue engineering

For the filling and reconstruction of non-healing bone defects, the application of porous ceramic scaffold as bone substitutes is considered to be a reasonable choice. In bone tissue engineering, an ideal scaffold must satisfy several criterias such as open porosity, having high compressive strength (it depends where in body, and if external fixatures are used) and the practicability for cell migration. Many researchers have focused on enhancing the mechanical properties of hydroxyapatite scaffolds by combining it with other biomaterials, such as bioglass and polymers. Nevertheless, there is still a lack of suitable scaffolds based on porous biomaterials. In this study, zirconia scaffolds from two different templates (polyurethane (PU) and Acrylonitrile Butadiene Styrene (ABS) templates) were successfully fabricated with dissimilar fabrication techniques. The scaffold surfaces were further modified with mesoporous bioglass for the purpose of bone tissue engineering. In the study of PU template scaffold, high porosity (~88%) sol-gel derived yttria-stabilized zirconia (YSZ) scaffold was prepared by a polyurethane (PU) foam replica method using sol-gel derived zirconia for the first time, and double coated with Mesoporous Bioglass (MBGs) coating. For the ABS template scaffold, two types of templates (cube and cylinder) with different strut spacings were used and fabricated by a 3D Rapid Prototyper. Subsequently, zirconia scaffolds with low porosity (63±2.8% to 68±2.5%) were fabricated by embedding the zirconia powder slurry into the ABS templates and burning out the ABS to produce a uniform porous structure. The zirconia scaffolds were double coated with mesoporous bioglass by dip coating for the first time. The porosities of the scaffolds were calculated before and after coating. The microstructures were then examined using scanning electron microscopy and the mechanical properties were evaluated using compressive test. Accordingly, relationships between microstructure, processing and mechanical behaviour of the porous zirconia was discussed. Scaffold biocompatibility and bioactivity was also evaluated using a bone marrow stromal cell (BMSC) proliferation test and a simulated body fluid test.

N-Aryl stilbazolium dyes as sensitizers for solar cells

Eight new N-arylstilbazolium chromophores with electron donating –NR2 (R = Me or Ph) substituents have been synthesized via Knoevenagel condensations and isolated as their PF6− salts. These compounds have been characterized by using various techniques including 1H NMR and IR spectroscopies and electrospray mass spectrometry. UV–vis absorption spectra recorded in acetonitrile are dominated by intense, low energy π → π* intramolecular charge-transfer (ICT) bands, and replacing Me with Ph increases the ICT energies. Cyclic voltammetric studies show irreversible reduction processes, together with oxidation waves that are irreversible for R = Me, but reversible for R = Ph. Single crystal X-ray structures have been determined for three of the methyl ester-substituted stilbazolium salts and for the Cl− salts of their picolinium precursors. Time-dependent density functional theory calculations afford reasonable predictions of ICT energies, but greater rigour is necessary for –NPh2 derivatives. The four new acid-functionalized dyes give moderate sensitization efficiencies (ca. 0.2%) when using TiO2-based photoanodes, with relatively higher values for R = Ph vs Me, while larger efficiencies (up to 0.8%) are achieved with ZnO substrates.

Compensation of unmodeled aircraft dynamics in airborne inspection of linear infrastructure assets

Fixed-wing aircraft equipped with downward pointing cameras and/or LiDAR can be used for inspecting approximately piecewise linear assets such as oil-gas pipelines, roads and power-lines. Automatic control of such aircraft is important from a productivity and safety point of view (long periods of precision manual flight at low-altitude is not considered reasonable from a safety perspective). This paper investigates the effect of any unwanted coupling between guidance and autopilot loops (typically caused by unmodeled delays in the aircraft’s response), and the specific impact of any unwanted dynamics on the performance of aircraft undertaking inspection of piecewise linear corridor assets (such as powerlines). Simulation studies and experimental flight tests are used to demonstrate the benefits of a simple compensator in mitigating the unwanted lateral oscillatory behaviour (or coupling) that is caused by unmodeled time constants in the aircraft dynamics.