Plasma nanoscience : from controlled complexity to practical simplicity

Plasma Nanoscience is a multidisciplinary research field which aims to elucidate the specific roles, purposes, and benefits of the ionized gas environment in assembling and processing nanoscale objects in natural, laboratory and technological situations. Compared to neutral gas-based routes, in low-temperature weakly-ionized plasmas there is another level of complexity related to the necessity of creating and sustaining a suitable degree of ionization and a much larger number of species generated in the gas phase. The thinner the nanotubes, the stronger is the quantum confinement of electrons and more unique size-dependent quantum effects can emerge. Furthermore, due to a very high mobility of electrons, the surfaces are at a negative potential compared to the plasma bulk. Therefore, there are non-uniform electric fields within the plasma sheath. The electric field lines start in the plasma bulk and converge to the sharp tips of the developing one-dimensional nanostructures.

Arterial short-term travel time prediction using Bluetooth data

This project recognized lack of data analysis and travel time prediction on arterials as the main gap in the current literature. For this purpose it first investigated reliability of data gathered by Bluetooth technology as a new cost effective method for data collection on arterial roads. Then by considering the similarity among varieties of daily travel time on different arterial routes, created a SARIMA model to predict future travel time values. Based on this research outcome, the created model can be applied for online short term travel time prediction in future.

Nanoscale surface and interface engineering : why plasma-aided?

This contribution provides arguments why and in which cases low-temperature plasmas should be used for nanoscale surface and interface engineering and discusses several advantages offered by plasma-based processes and tools compared to neutral gas fabrication routes. Relevant processes involve nanotexturing (etching, sputtering, nanostructuring, pre-patterning, etc.) and composition/structure control at nanoscales (phases, layering, elemental presence, doping, functionalization, etc.) and complex combinations thereof. A case study in p-Si/n-Si solar cell junction exemplifies a successful use of inductively coupled plasma-assisted RF magnetron sputtering for nanoscale fabrication of a bi-layered stack of unconventionally doped highly-crystalline silicon nanofilms with engineered high-quality interfaces.

Thiophene-benzothiadiazole-thiophene (D-A-D) based polymers : Effect of donor/acceptor moieties adjacent to D-A-D segment on photophysical and photovoltaic properties

New push-pull copolymers based on thiophene (donor) and benzothiadiazole (acceptor) units, poly[4,7-bis(3-dodecylthiophene-2-yl) benzothiadiazole-co- thiophene] (PT3B1) and poly[4,7-bis(3-dodecylthiophene-2-yl) benzothiadiazole-co-benzothiadiazole] (PT2B2), are designed and synthesized via Stille and Suzuki coupling routes respectively. Gel permeation chromatography shows the number average molecular weights are 31100 and 8400 g mol-1 for the two polymers, respectively. Both polymers have shown absorption throughout a wide range of the UV-vis region, from 300 to 650 nm. A significant red shift of the absorption edge is observed in thin films compared to solution of the copolymers; the optical band gap is in the range of 1.7 to 1.8 eV. Cyclic voltammetry indicates reversible oxidation and reduction processes with HOMO energy levels calculated to be in the range of 5.2 to 5.4 eV. Upon testing both materials for organic field-effect transistors (OFETs), PT3B1 showed a hole mobility of 6.1 × 10-4 cm2 V-1 s -1, while PT2B2 did not show any field effect transport. Both copolymers displayed a photovoltaic response when combined with a methanofullerene as an electron acceptor. The best performance was achieved when the copolymer PT3B1 was blended with [70]PCBM in a 1:4 ratio, exhibiting a short-circuit current of 7.27 mA cm-2, an open circuit voltage of 0.85 V, and a fill factor of 41% yielding a power conversion efficiency of 2.54% under simulated air mass (AM) 1.5 global (1.5 G) illumination conditions (100 mW cm-2). Similar devices utilizing PT2B2 in place of PT3B1 demonstrated reduced performance with a short-circuit current of 4.8 mA cm -2, an open circuit voltage of 0.73 V, and a fill factor of 30% resulting in a power conversion efficiency of roughly 1.06%.

Intravitreal drug delivery in retinal disease : are we out of our depth?

Introduction With the ever-increasing global burden of retinal disease, there is an urgent need to vastly improve formulation strategies that enhance posterior eye delivery of therapeutics. Despite intravitreal administration having demonstrated notable superiority over other routes in enhancing retinal drug availability, there still exist various significant physical/biochemical barriers preventing optimal drug delivery into the retina. A further complication lies with an inability to reliably translate laboratory-based retinal models into a clinical setting. Several formulation approaches have recently been evaluated to improve intravitreal therapeutic outcomes, and our aim in this review is to highlight strategies that hold the most promise. Areas covered We discuss the complex barriers faced by the intravitreal route and examine how formulation strategies including implants, nanoparticulate carriers, viral vectors and sonotherapy have been utilized to attain both sustained delivery and enhanced penetration through to the retina. We conclude by highlighting the advances and limitations of current in vitro, ex vivo and in vivo retinal models in use by researchers globally. Expert opinion Various nanoparticle compositions have demonstrated the ability to overcome the retinal barriers successfully; however, their utility is limited to the laboratory setting. Optimization of these formulations and the development of more robust experimental retinal models are necessary to translate success in the laboratory into clinically efficacious outcomes.

The elaboration likelihood model : review, critique and research agenda

Purpose: The purpose of this paper is to review, critique and develop a research agenda for the Elaboration Likelihood Model (ELM). The model was introduced by Petty and Cacioppo over three decades ago and has been modified, revised and extended. Given modern communication contexts, it is appropriate to question the model’s validity and relevance. Design/methodology/approach: The authors develop a conceptual approach, based on a fully comprehensive and extensive review and critique of ELM and its development since its inception. Findings: This paper focuses on major issues concerning the ELM. These include model assumptions and its descriptive nature; continuum questions, multi-channel processing and mediating variables before turning to the need to replicate the ELM and to offer recommendations for its future development. Research limitations/implications: This paper offers a series of questions in terms of research implications. These include whether ELM could or should be replicated, its extension, a greater conceptualization of argument quality, an explanation of movement along the continuum and between central and peripheral routes to persuasion, or to use new methodologies and technologies to help better understanding consume thinking and behaviour? All these relate to the current need to explore the relevance of ELM in a more modern context. Practical implications: It is time to question the validity and relevance of the ELM. The diversity of on- and off-line media options and the variants of consumer choice raise significant issues. Originality/value: While the ELM model continues to be widely cited and taught as one of the major cornerstones of persuasion, questions are raised concerning its relevance and validity in 21st century communication contexts.

Touch, grasp, deliver and control : functional cross-talk between microtubules and cell adhesions

Cross-talk between microtubule networks and sites of cell-matrix and cell-cell adhesion has profound impact on these structures and is essential for proper cell organization, polarization and motility. Components of adhesion sites can interact directly with microtubules or with proteins that specifically associate with microtubule plus ends and minus ends and in this way capture, stabilize or destabilize microtubules. In their turn, microtubules can serve as routes for delivery of structural and regulatory factors that control adhesion site turnover. In addition, the microtubule lattice or growing microtubule plus ends can serve as diffusional sinks that accumulate and scaffold regulatory molecules, thereby affecting their activity in the vicinity of adhesions. Combination of these mechanisms underlies the functional co-operation between microtubules and adhesion sites and defines their dynamic behavior.

Medical and nursing students perceived knowledge, attitudes, and practices concerning human immunodeficiency virus

Objective. To assess medical and nursing students’ knowledge, attitudes, and practices (KAP) regarding human immunodeficiency virus (HIV) in Fiji. Methods. A cross-sectional study of 275 medical and 252 nursing students that participated in a questionnaire survey on HIV KAP. Data was analysed according to their gender, program of study, and academic year. Results. The mean HIV knowledge (HK) and attitude scores were 16.0 and 41.3, respectively. Mean HK score was significantly higher in males compared to females. Significant positive correlations were found between HK and academic year for medical () and nursing () students and between HK and attitude scores (). The majority of students indicated fear in contracting HIV through clinical practice and felt that health care workers have the right to know a patients HIV status for their own safety. The majority would wear gloves to touch a patient if suspected of HIV. Conclusions. The study found a high level of HIV knowledge and positive attitude towards HIV patients. However, respondents also displayed negative attitudes and unacceptable practices probably due to fear. Training institutions need to ensure that students gain accurate knowledge on HIV especially on transmission routes to allay the fear of caring for HIV-infected patients.

Better health outcomes for people with physical disabilities in China through audits of mobility related access : a research and implementation need

China has 85 million people with disabilities, 30% of whom have a physical disability(1). Up to 2006, overall disability rates increased by 0.5% per year, more for males and in rural areas, and rates of physical disability increased by 11.2% per year(2). With population ageing the proportion of people with disability will increase even faster. In May 2014 the 67th World Health Assembly adopted a resolution endorsing the WHO Global Disability Action Plan 2014–2021. One of its three objectives is “to remove barriers and improve access to health services and programmes”. Access to transport contributes to positive health outcomes both directly and indirectly (e.g. access to economic opportunities, which is associated with better health)(3). However, once people with physical disabilities leave their dwellings they are confronted with physical barriers to their mobility, ranging from the condition/provision of paths to the cost/availability of transport and access to buildings. In addition, their mobility restrictions increase their vulnerability as road users, exposing them to a higher risk of injury through road crashes. QUT's School of Public Health and Social Work (PHSW) and and Centre for Accident Research and Road Safety-Queensland (CARRS-Q) CARRS-Q have been collaborating on development of a combined disability audit and road safety access tool that can identify transport barriers and safety issues along the routes taken by people with disabilities, to enable prioritisation of actions to address these issues. There are also spin-off benefits for other road users from addressing the rising toll of disability through road crashes in China(4). The tool has undergone initial proof-of-concept testing in India and Viet Nam, and is currently being assessed in Cambodia and Laos. Given the rapid development of China, increases in rates of physical disability and the impacts of an ageing population, it is proposed to establish collaborative research through the Australia-China Centre for Public Health to (1) tailor the combined road safety audit and disability access tool for use in China; (2) evaluate its use on a sample of routes; (3) develop plans for changes to the routes in consultation with local authorities; (4) evaluate the effectiveness of implemented changes in terms of access and health. 1. Zheng, Q, et al, 2014. Health and Quality of Life Outcomes, 12:25. 2. Zheng, X, et al, 2011. Bull World Health Org, 89:788–797. 3. Götschi, T & Kahlmeier, S, 2011. Integrated Transport, Health, and Sustainability Assessment (INTHESA): Final Report. Institute of Social and Preventive Medicine, University of Zurich. 4. Lin, T, et al, 2013. J Public Health, 35:541–547.

Key influences on cycling for transport

Over recent years, the health, transport and environment sectors have been increasingly focused on the promotion of transport cycling. From a health perspective, transport cycling is recognised as a beneficial form of physical activity as it can be easily integrated into daily living, is done at an intensity that confers health benefits, and is associated with reductions in mortality and morbidity [1]. From a safety perspective, the risk of a serious cycling injury decreases as cycling increases [2] as having more cyclists on roads increases motor vehicle drivers’ awareness of cyclists and in turn makes cycling safer. Whereas cycling for recreation is the fourth most commonly reported physical activity among Australian adults [3], transport cycling is an underutilised travel mode. Approximately 1.3% of journeys to work in Australia are made by bicycle [4]. This low prevalence is mirrored in the UK and the US, but not in some European countries like the Netherlands and Denmark, where over 18% and 26%, respectively, of all journeys are made by bicycle [5]. In the past decade, concerted efforts have been made by Australian state and local governments to increase cycling rates [6]. Notably, Melbourne, Sydney and Brisbane have implemented policies, increased bicycle commuting infrastructure, and offered information and promotion programs to encourage commuter cycling [6,7]. Governments have also developed comprehensive longterm plans for guiding future cycling strategies, using lessons learned from around the world in developing successful cycling policy and promotion [6,7]. Changes in transport cycling rates in inner cities since these efforts have been implemented are encouraging. In Sydney, census data indicate an 83% increase in the number of people using a bicycle for commuting between 2001 and 2011 [8]. Counts of bicycles being ridden along major cycling commuter routes indicate increases in weekday morning cycling trips in Brisbane (63% increase from 2004 to 2010) [7] and in Melbourne (a 43% increase from 2006 to 2008) [9]. However, bicycle mode share to work has changed little: for example, between 2001 and 2011, it decreased slightly from 1.6% to 1.3% in Brisbane [10,11]. Researchers have been investigating factors that may be contributing to low rates of cycling for transport, to inform future policy and programming to encourage transport cycling. The aim of this paper is to overview our work to date in this area of research in Queensland.

Transit route occupancy load factor and passenger average travel time for quality of service assessment

This paper investigates quality of service (QoS) and resource productivity implications of transit route passenger loading and travel time. It highlights the value of occupancy load factor as a direct passenger comfort QoS measure. Automatic Fare Collection data for a premium radial bus route in Brisbane, Australia, is used to investigate time series correlation between occupancy load factor and passenger average travel time. Correlation is strong across the entire span of service in both directions. Passengers tend to be making longer, peak direction commuter trips under significantly less comfortable conditions than off-peak. The Transit Capacity and Quality of Service Manual uses segment based load factor as a measure of onboard loading comfort QoS. This paper provides additional insight into QoS by relating the two route based dimensions of occupancy load factor and passenger average travel time together in a two dimensional format, both from the passenger’s and operator’s perspectives. Future research will apply Value of Time to QoS measurement, reflecting perceived passenger comfort through crowding and average time spent onboard. This would also assist in transit service quality econometric modeling. The methodology can be readily applied in a practical setting where AFC data for fixed scheduled routes is available. The study outcomes also provide valuable research and development directions.

Transit route occupancy load factor and passenger average travel time for quality of service assessment

This presentation investigates quality of service (QoS) and resource productivity implications of transit route passenger loading and travel time. It highlights the value of occupancy load factor as a direct passenger comfort QoS measure. Automatic Fare Collection data for a premium radial bus route in Brisbane, Australia, is used to investigate time series correlation between occupancy load factor and passenger average travel time. Correlation is strong across the entire span of service in both directions. Passengers tend to be making longer, peak direction commuter trips under significantly less comfortable conditions than off-peak. The Transit Capacity and Quality of Service Manual uses segment based load factor as a measure of onboard loading comfort QoS. This paper provides additional insight into QoS by relating the two route based dimensions of occupancy load factor and passenger average travel time together in a two dimensional format, both from the passenger’s and operator’s perspectives. Future research will apply Value of Time to QoS measurement, reflecting perceived passenger comfort through crowding and average time spent onboard. This would also assist in transit service quality econometric modeling. The methodology can be readily applied in a practical setting where AFC data for fixed scheduled routes is available. The study outcomes also provide valuable research and development directions.

Exploring association between perceived importance of travel/traffic information and travel behaviour in natural disasters : a case study of the 2011 Brisbane floods

A sound understanding of travellers’ behavioural changes and adaptation when facing a natural disaster is a key factor in efficiently and effectively managing transport networks at such times. This study specifically investigates the importance of travel/traffic information and its impact on travel behaviour during natural disasters. Using the 2011 Brisbane flood as a case study, survey respondents’ perceptions of the importance of travel/traffic information before, during, and after the flood were modelled using random-effects ordered logit. A hysteresis phenomenon was observed: respondents’ perceptions of the importance of travel/traffic information increased during the flood, and although its perceived importance decreased after the flood, it did not return to the pre-flood level. Results also reveal that socio-demographic features (such as gender and age) have a significant impact on respondents’ perceptions of the importance of travel/traffic information. The roles of travel time and safety in a respondent’s trip planning are also significantly correlated to their perception of the importance of this information. The analysis further shows that during the flood, respondents generally thought that travel/traffic information was important, and adjusted their travel plans according to information received. When controlling for other factors, the estimated odds of changing routes and cancelling trips for a respondent who thought that travel/traffic information was important, are respectively about three times and seven times the estimated odds for a respondent who thought that travel/traffic information was not important. In contrast, after the flood, the influence of travel/traffic information on respondents’ travel behaviour diminishes. Finally, the analysis shows no evidence of the influence of travel/traffic information’s on respondents’ travel mode; this indicates that inducing travel mode change is a challenging task.

Examining how projections about the future of society are related to present-day climate change action

Global climate change will affect all domains of person-environment relations. Tackling climate change will require social change that can be motivated by people’s imaginings of the future of their society where such social change has occurred. We use the “collective futures” framework to examine whether beliefs about the future of society are related to present-day intentions to take climate change action. Participants from two Brazilian samples imagined their society in 2050 where climate change was mitigated and then rated how this future society would differ from Brazilian society today in terms of societal-level dysfunction and development and personal-level traits and values. To the extent that participants believed preventing climate change would result in societal development and more competence traits, they were more willing to engage in environmental citizenship activities. Individual differences in future time perspective also impacted environmental citizenship intention. Societal development and consideration of future consequences seem to be distinct routes by which future thinking influence climate change action.

Functional and mechanistic investigation of Shikonin in scarring

Scarring is a significant medical burden; financially to the health care system and physically and psychologically for patients. Importantly, there have been numerous case reports describing the occurrence of cancer in burn scars. Currently available therapies are not satisfactory due to their undesirable side-effects, complex delivery routes, requirements for long-term use and/or expense. Radix Arnebiae (Zi Cao), a perennial herb, has been clinically applied to treat burns and manage scars for thousands of years in Asia. Shikonin, an active component extracted from Radix Arnebiae, has been demonstrated to induce apoptosis in cancer cells. Apoptosis is an essential process during scar tissue remodelling. It was therefore hypothesized that Shikonin may induce apoptosis in scar-associated cells. This investigation presents the first detailed in vitro study examining the functional responses of scar-associated cells to Shikonin, and investigates the mechanisms underlying these responses. The data obtained suggests that Shikonin inhibits cell viability and proliferation and reduces detectable collagen in scar-derived fibroblasts. Further investigation revealed that Shikonin induces apoptosis in scar fibroblasts by differentially regulating the expression of caspase 3, Bcl-2, phospho-Erk1/2 and phospho-p38. In addition, Shikonin down-regulates the expression of collagen I, collagen III and alpha-smooth muscle actin genes hence attenuating collagen synthesis in scar-derived fibroblasts. In summary, it is demonstrated that Shikonin induces apoptosis and decreases collagen production in scar-associated fibroblasts and may therefore hold potential as a novel scar remediation therapy.