787 resultados para impact crater
Resumo:
The objective of this research project was to consider the social impact of sport and physical activity on the lives of Indigenous Australians and their communities. There has been strong research interest in the links between sport and recreation programs and various health and social outcomes and a well-established body of literature exists on the use of sport to address social issues in mainstream society (A Thomson, Darcy and Pearce 2010). The consensus is that physical activity is an important contributor to health for all people (Nelson, Abbott and Macdonald 2010). While there is strong research interest, what remains unclear is the value and impact of sport and physical activity on Indigenous communities (Cairnduff 2001). Nelson (2009) drawing on the work of Jonas and Langton (1994) indicates that an ‘Aboriginal person is a descendant of an Indigenous inhabitant of Australia, identifi es as an Aboriginal, and is recognised as Aboriginal by members of the community in which he or she lives’ (p. 97). Even this defi nition has the potential to be politically charged. At a general level, the collective terms ‘Indigenous’ (capitalised) and ‘Aboriginal and Torres Strait Islander’ people (title capitalised) appear to be broadly acceptable terms. Indigenous groups cannot be considered to be homogenous as there is much diversity between and within groups (Nelson et al. 2010; Parker et al. 2006). It is therefore important this report is not viewed as taking an essentialist view of who Indigenous people are and how they develop. Rather, this paper attempts to describe and discuss the experiences of some individuals and their communities in site-specifi c surfi ng programs.
Resumo:
Muscle hypertrophy occurs following increased protein synthesis, which requires activation of the ribosomal complex. Additionally, increased translational capacity via elevated ribosomal RNA (rRNA) synthesis has also been implicated in resistance training-induced skeletal muscle hypertrophy. The time course of ribosome biogenesis following resistance exercise (RE) and the impact exerted by differing recovery strategies remains unknown. In the present study, the activation of transcriptional regulators, the expression levels of pre-rRNA, and mature rRNA components were measured through 48 h after a single-bout RE. In addition, the effects of either low-intensity cycling (active recovery, ACT) or a cold-water immersion (CWI) recovery strategy were compared. Nine male subjects performed two bouts of high-load RE randomized to be followed by 10 min of either ACT or CWI. Muscle biopsies were collected before RE and at 2, 24, and 48 h after RE. RE increased the phosphorylation of the p38-MNK1-eIF4E axis, an effect only evident with ACT recovery. Downstream, cyclin D1 protein, total eIF4E, upstream binding factor 1 (UBF1), and c-Myc proteins were all increased only after RE with ACT. This corresponded with elevated abundance of the pre-rRNAs (45S, ITS-28S, ITS-5.8S, and ETS-18S) from 24 h after RE with ACT. In conclusion, coordinated upstream signaling and activation of transcriptional factors stimulated pre-rRNA expression after RE. CWI, as a recovery strategy, markedly blunted these events, suggesting that suppressed ribosome biogenesis may be one factor contributing to the impaired hypertrophic response observed when CWI is used regularly after exercise.
Resumo:
This chapter explores the impact of UN Millennium Development Goals (MDGs) and Rio + 20 in improving Corporate Social Responsibility (CSR) practices. While MDGs and Rio + 20 have suggested additive guidelines for improving CSR practices, they do not provide a strong legislative mandate. We find both MDGs and Rio + 20 have had limited cumulative effect on CSR practices and discourses within the corporate reports. UN bodies should bring a new policy and regulatory framework that addresses limitations in the principles espoused in the MDGs and Rio + 20. An independent monitoring system (a social compliance audit mechanism) can be mandated in an attempt to make incremental substantive change.
Resumo:
This review examines recent literature on the public library as a creative place and the ways in which socio-cultural impact is being measured in assessments of cultural value. Inputs such as funding and staffing are frequently measured against outputs such as visitor numbers and lending frequencies, but qualitative measures (outcomes and impacts) are minimal in the literature because of the lack of persuasive evaluative frameworks and the difficulty of designing and facilitating the evaluations at local and national levels. Nevertheless, when combined with data about outputs and outcomes, the impact on individuals and their communities can be measured effectively and reported persuasively (Poll 2012, p.124). This contextual review provides an overview of current thinking about public libraries and creative spaces with particular attention paid to the rise of so-called makerspaces and Fab Labs. This includes discussion on the types of creative activities that are occurring in the public library context, and an outline of the rhetoric and reality of the public library as a community space. These outlines are reconsidered in a discussion of the evaluative frameworks that have been employed by libraries in the past, followed by an account of some prominent creative spaces that have been formally evaluated. The existence of creative spaces in public libraries is in a state of constant flux, and the development and redevelopment of evaluative frameworks will ensure that published reports will continue to appear throughout 2015 and beyond. This review provides a brief snapshot of the state of the field as it is in the first quarter of 2015.
Resumo:
This paper presents an experimental investigation on the lateral impact performance of axially loaded concrete-filled double-skin tube (CFDST) columns. These columns have desirable structural and constructional properties and have been used as columns in building, legs of off shore platforms and as bridge piers. Since they could be vulnerable to impact from passing vessels or vehicles, it is necessary to understand their behaviour under lateral impact loads. With this in mind, an experimental method employing an innovative instrumented horizontal impact testing system (HITS) was developed to apply lateral impact loads whilst the column maintained a static axial pre-loading to examine the failure mechanism and key response parameters of the column. These included the time histories of impact force, reaction forces, global lateral deflection and permanent local buckling profile. Eight full scale columns were tested for key parameters including the axial load level and impact location. Based on the test data, the failure mode, peak impact force, impact duration, peak reaction forces, reaction force duration, column maximum and residual global deflections and column local buckling length, depth and width under varying conditions are analysed and discussed. It is evident that the innovative HITS can successfully test structural columns under the combination of axial pre-loading and impact loading. The findings on the lateral impact response of the CFDST columns can serve as a benchmark reference for their future analysis and design.
Resumo:
Recent studies have examined the consequences of brand credibility, with the majority of works embedded in physical goods. Despite the growing attention service branding receives, little is known about how service failure and recovery efforts impact on brand credibility in service organisations. The purpose of this study is to examine how brand credibility is affected by service failure and an organisations recovery efforts. An online self-completion survey of airline consumers (n=875) was employed to test the relationships between the focal constructs. The results show that a service firm’s effective complaint handling positively impacts satisfaction with complaining, overall satisfaction and service brand credibility. The study also finds that the higher the perceived magnitude of failure, the more difficult it is to satisfy a customer. These results demonstrate that it is possible to maintain service brand credibility during a service failure, provided brand managers develop and implement effective complain handling procedures.
Resumo:
Purpose The purpose of this paper is to reduce the potential for litigation by improving valuers’ awareness of water risks. As part of a valuer’s due diligence, the paper provides guidance as to how to identify such risks by explaining the different types and examining how online search tools can be used in conjunction with more traditional methods to evaluate the probability of these risks occurring. Design/methodology/approach The paper builds on prior research, which examined the impact of water to and for valuations. By means of legal/doctrinal analysis, this paper considers relevant issues from the perspective of managing client expectations and needs. In so doing it identifies online tools available to assist in identifying at risk properties and better informing clients. Findings While the internet provides a variety of tools to gain access to relevant information, this information most commonly is only provided subject to disclaimer. Valuers need to ensure that blind reliance is not given to use of these tools but that the tools are used in conjunction with individual property inspections. Research limitations/implications Although the examples considered primarily are Australian, increasing water risks generally make the issues considered relevant for any jurisdiction. The research will be of particular interests to practitioners in coastal or riverine areas. Practical implications Valuation reports are sought for a variety of purposes from a variety of clients. These range from the experienced, knowledgeable developer looking to maximise available equity to the inexperienced, uneducated individual looking to acquire their home and thinking more often than not with their heart not their head. More informed practices by valuers will lead to valuation reports being more easily understood by clients, thus lessening the likelihood of litigation against the valuer for negligence. Originality/value The paper highlights the issue of water risks; the need for valuers to properly address potential and actual risks in their reports; and the corresponding need to undertake all appropriate searches and enquiries of the property to be valued. It reinforces the importance of access to the internet as a tool in the valuation process.
Resumo:
Lateral collisions between heavy road vehicles and passenger trains at level crossings and the associated derailments are serious safety issues. This paper presents a detailed investigation of the dynamic responses and derailment mechanisms of trains under lateral impact using a multi-body dynamics simulation method. Formulation of a three-dimensional dynamic model of a passenger train running on a ballasted track subject to lateral impact caused by a road truck is presented. This model is shown to predict derailment due to wheel climb and car body overturning mechanisms through numerical examples. Sensitivities of the truck speed and mass, wheel/rail friction and the train suspension to the lateral stability and derailment of the train are reported. It is shown that improvements to the design of train suspensions, including secondary and inter-vehicle lateral dampers have higher potential to mitigate the severity of the collision-induced derailments.
Resumo:
This project described sleep-wake behaviour in community-dwelling older adults and in community dementia care. It examined the applicability of a newly presented conceptual model (the Multifactorial Influences on Sleep Health model) to evaluate factors influencing sleep in ageing, with a particular focus on the importance of daytime light exposure and the impact of partners.
Resumo:
This research treats the lateral impact behaviour of composite columns, which find increasing use as bridge piers and building columns. It offers (1) innovative experimental methods for testing structural columns, (2) dynamic computer simulation techniques as a viable tool in analysis and design of such columns and (3) significant new information on their performance which can be used in design. The research outcomes will enable to protect lives and properties against the risk of vehicular impacts caused either accidentally or intentionally.
Resumo:
Objective: To determine the extent to which different strength training exercises selectively activate the commonly injured biceps femoris long head (BFLH) muscle. Methods: This two-part observational study recruited 24 recreationally active males. Part 1 explored the amplitudes and the ratios of lateral to medial hamstring (BF/MH) normalised electromyography (nEMG) during the concentric and eccentric phases of 10 common strength training exercises. Part 2 used functional magnetic resonance imaging (fMRI) to determine the spatial patterns of hamstring activation during two exercises which i) most selectively, and ii) least selectively activated the BF in part 1. Results: Eccentrically, the largest BF/MH nEMG ratio was observed in the 45° hip extension exercise and the lowest was observed in the Nordic hamstring (NHE) and bent-knee bridge exercises. Concentrically, the highest BF/MH nEMG ratio was observed during the lunge and 45° hip extension and the lowest was observed for the leg curl and bent-knee bridge. fMRI revealed a greater BFLH to semitendinosus activation ratio in the 45° hip extension than the NHE (p<0.001). The T2 increase after hip extension for BFLH, semitendinosus and semimembranosus muscles were greater than that for BFSH (p<0.001). During the NHE, the T2 increase was greater for the semitendinosus than for the other hamstrings (p≤0.002). Conclusion: This investigation highlights the non-uniformity of hamstring activation patterns in different tasks and suggests that hip extension exercise more selectively activates the BFLH while the NHE preferentially recruits the semitendinosus. These findings have implications for strength training interventions aimed at preventing hamstring injury.
Resumo:
Purpose of review: Cancer-related fatigue (CRF) is the most common psychosomatic distress experienced by cancer patients before, during and after chemotherapy. Its impact on functional status and Health Related Quality of Life is a great concern among patients, healthcare professionals and researchers. The primary objective of this systematic review is to determine whether the different chemotherapies affect the association of CRF with individual pro- and anti-inflammatory cytokines. The PRISMA statement guideline has been followed to systematically search and screen article from PubMed and Embase. Recent findings: This review has examined 14 studies which included a total of 1312 patients. These studies assayed 20 different kinds of cytokines. The cytokines interleukin-6, interleukin-1RA, TGF-[beta] and sTNF-R2 were associated with CRF in patients receiving anthracycline-based chemotherapy. However, only interleukin-13 was identified in the taxane-based chemotherapy. Similarly, different sets of cytokines were linked with CRF in patients with chemotherapy regimens containing platinum, cyclophosphamides, topotecan or bleomycin. Summary: This review has identified that cytokines are differentially linked with CRF according to the various types of chemotherapy regimens.
Resumo:
This paper presents an experimental investigation on the lateral impact response of axially loaded concrete filled double skin tube (CFDST) columns. A total of four test series are being conducted at Queensland University of Technology using a novel horizontal impact-testing rig. The test results reported in this paper are from the first test series, where the columns are pinned at both ends and impacted at mid-span. In the next three series, effects of support conditions, impact location and repeated impact will be treated. The main objectives of the current paper are to describe the innovative testing procedure and provide some insight into the lateral impact behavior and failure of simply supported axially pre-loaded CFDST columns. The results include time histories of impact forces, reaction forces, axial force and global lateral deflection. Based on the test data, the failure mode, peak impact force, peak reaction forces, maximum deflection and residual deflection, with and without axial load, are analyzed and discussed. The findings of this study will serve as a benchmark reference for future analysis and design of CFDST columns.
Resumo:
Concrete-filled double skin tube (CFDST) is a creative innovation of steel-concrete-steel composite construction, formed by two concentric steel tubes separated by a concrete filler. Over the recent years, this column form has been widely used as a new sustainable alternative to existing structural bridge piers and building columns. Since they could be vulnerable to impact from passing vessels or vehicles, it is necessary to understand their behaviour under lateral impact loads. With this in mind, physical tests on full scale columns were performed using an innovative horizontal impact testing system to obtain the failure modes, the time history of the impact force, reaction forces and global lateral deflection as well as permanent local buckling profile of the columns. The experimental testing was complemented and supplemented by developing and using an advanced finite element analysis model. The model was validated by comparing the numerical results against experimental data. The findings of this study will serve as a benchmark reference for future analysis and design of CFDST columns.
Resumo:
Once the ugly duckling of the lighting world, the fluorescent bulb recently has become something of an eco-darling thanks to its energy efficiency. Whereas a standard off-the-shelf incandescent bulb devotes only about five percent of its total electrical consumption to produce visible light (the remainder is released in heat), fluorescent lighting employs an entirely different process (it radiates rather than burns) that is four to six times more efficient. Fluorescents are indisputably superior in performance, but up to 5 milligrams of mercury, a hazardous trace metal, is included in the manufacture of each lamp