Dancing between diversity and consistency : refining assessment in postgraduate degrees in dance

This publication is the culmination of a 2 year Australian Learning and Teaching Council's Project Priority Programs Research Grant which investigates key issues and challenges in developing flexible guidelines lines for best practice in Australian Doctoral and Masters by Research Examination, encompassing the two modes of investigation, written and multi-modal (practice-led/based) theses, their distinctiveness and their potential interplay. The aims of the project were to address issues of assessment legitimacy raised by the entry of practice-orientated dance studies into Australian higher degrees; examine literal embodiment and presence, as opposed to cultural studies about states of embodiment; foreground the validity of questions around subjectivity and corporeal intelligence/s and the reliability of artistic/aesthetic communications, and finally to celebrate ‘performance mastery’(Melrose 2003) as a rigorous and legitimate mode of higher research. The project began with questions which centred around: the functions of higher degree dance research; concepts of 'master-ness’ and ‘doctorateness’; the kinds of languages, structures and processes which may guide candidates, supervisors, examiners and research personnel; the purpose of evaluation/examination; addressing positive and negative attributes of examination. Finally the study examined ways in which academic/professional, writing/dancing, tradition/creation and diversity/consistency relationships might be fostered to embrace change. Over two years, the authors undertook a qualitative national study encompassing a triangulation of semi-structured face to face interviews and industry forums to gather views from the profession, together with an analysis of existing guidelines, and recent literature in the field. The most significant primary data emerged from 74 qualitative interviews with supervisors, examiners, research deans and administrators, and candidates in dance and more broadly across the creative arts. Qualitative data gathered from the two primary sources, was coded and analysed using the NVivo software program. Further perspectives were drawn from international consultant and dance researcher Susan Melrose, as well as publications in the field, and initial feedback from a draft document circulated at the World Dance Alliance Global Summit in July 2008 in Brisbane. Refinement of data occurred in a continual sifting process until the final publication was produced. This process resulted in a set of guidelines in the form of a complex dynamic system for both product and process oriented outcomes of multi-modal theses, along with short position papers on issues which arose from the research such as contested definitions, embodiment and ephemerality, ‘liveness’ in performance research higher degrees, dissolving theory/practice binaries, the relationship between academe and industry, documenting practices and a re-consideration of the viva voce.

My place through my eyes : a social constructionist approach to researching the relationships between socioeconomic living contexts and physical activity

There is a growing evidence-base in the epidemiological literature that demonstrates significant associations between people’s living circumstances – including their place of residence – and their health-related practices and outcomes (Leslie, 2005; Karpati, Bassett, & McCord, 2006; Monden, Van Lenthe, & Mackenbach, 2006; Parkes & Kearns, 2006; Cummins, Curtis, Diez-Roux, & Macintyre, 2007; Turrell, Kavanagh, Draper, & Subramanian, 2007). However, these findings raise questions about the ways in which living places, such as households and neighbourhoods, figure in the pathways connecting people and health (Frolich, Potvin, Chabot, & Corin, 2002; Giles-Corti, 2006; Brown et al, 2006; Diez Roux, 2007). This thesis addressed these questions via a mixed methods investigation of the patterns and processes connecting people, place, and their propensity to be physically active. Specifically, the research in this thesis examines a group of lower-socioeconomic residents who had recently relocated from poorer suburbs to a new urban village with a range of health-related resources. Importantly, the study contrasts their historical relationship with physical activity with their reactions to, and everyday practices in, a new urban setting designed to encourage pedestrian mobility and autonomy. The study applies a phenomenological approach to understanding living contexts based on Berger and Luckman’s (1966) conceptual framework in The Social Construction of Reality. This framework enables a questioning of the concept of context itself, and a treatment of it beyond environmental factors to the processes via which experiences and interactions are made meaningful. This approach makes reference to people’s histories, habituations, and dispositions in an exploration between social contexts and human behaviour. This framework for thinking about context is used to generate an empirical focus on the ways in which this residential group interacts with various living contexts over time to create a particular construction of physical activity in their lives. A methodological approach suited to this thinking was found in Charmaz’s (1996; 2001; 2006) adoption of a social constructionist approach to grounded theory. This approach enabled a focus on people’s own constructions and versions of their experiences through a rigorous inductive method, which provided a systematic strategy for identifying patterns in the data. The findings of the study point to factors such as ‘childhood abuse and neglect’, ‘early homelessness’, ‘fear and mistrust’, ‘staying indoors and keeping to yourself’, ‘conflict and violence’, and ‘feeling fat and ugly’ as contributors to an ongoing core category of ‘identity management’, which mediates the relationship between participants’ living contexts and their physical activity levels. It identifies barriers at the individual, neighbourhood, and broader ecological levels that prevent this residential group from being more physically active, and which contribute to the ways in which they think about, or conceptualise, this health-related behaviour in relationship to their identity and sense of place – both geographic and societal. The challenges of living well and staying active in poorer neighbourhoods and in places where poverty is concentrated were highlighted in detail by participants. Participants’ reactions to the new urban neighbourhood, and the depth of their engagement with the resources present, are revealed in the context of their previous life-experiences with both living places and physical activity. Moreover, an understanding of context as participants’ psychological constructions of various social and living situations based on prior experience, attitudes, and beliefs was formulated with implications for how the relationship between socioeconomic contextual effects on health are studied in the future. More detailed findings are presented in three published papers with implications for health promotion, urban design, and health inequalities research. This thesis makes a substantive, conceptual, and methodological contribution to future research efforts interested in how physical activity is conceptualised and constructed within lower socioeconomic living contexts, and why this is. The data that was collected and analysed for this PhD generates knowledge about the psychosocial processes and mechanisms behind the patterns observed in epidemiological research regarding socioeconomic health inequalities. Further, it highlights the ways in which lower socioeconomic living contexts tend to shape dispositions, attitudes, and lifestyles, ultimately resulting in worse health and life chances for those who occupy them.

Synthesis, characterization of palygorskite supported zero-valent iron and its application for methylene blue adsorption

In this work, natural palygorskite impregnated with zero-valent iron (ZVI) was prepared and characterised. The combination of ZVI particles on surface of fibrous palygorskite can help to overcome the disadvantage of ultra-fine powders which may have strong tendency to agglomerate into larger particles, resulting in an adverse effect on both effective surface area and catalyst performance. There is a significant increase of methylene blue (MB) decolourized efficiency on acid treated palygorskite with ZVI grafted, within 5 mins, the concentration of MB in the solution was decreased from 94 mg/L to around 20 mg/L and the equilibration was reached at about 30 to 60 mins with only around 10 mg/L MB remained in solution. Changes in the surface and structure of prepared materials were characterized using X-ray diffraction (XRD), infrared (IR) spectroscopy, surface analysing and scanning electron microscopy (SEM) with element analysis and mapping. Comparing with zero-valent iron and palygorskite, the presence of zero-valent iron reactive species on the palygorskite surface strongly increases the decolourization capacity for methylene blue, and it is significant for providing novel modified clay catalyst materials for the removal of organic contaminants from waste water.

Development of self-efficacy and expectancy measures for benzodiazepines

This study aimed to develop and assess the reliability and validity of a pair of self-report questionnaires to measure self-efficacy and expectancy associated with benzodiazepine use, the Benzodiazepine Refusal Self- Efficacy Questionnaire (BRSEQ) and the Benzodiazepine Expectancy Questionnaire (BEQ). Internal structure of the questionnaireswas established by principal component analysis (PCA) in a sample of 155 respondents, and verified by confirmatory factor analyses (CFA) in a second independent sample (n=139) using structural equation modeling. The PCA of the BRSEQ resulted in a 16-item, 4-factor scale, and the BEQ formed an 18-item, 2-factor scale. Both scales were internally reliable. CFA confirmed these internal structures and reduced the questionnaires to a 14-item self-efficacy scale and a 12-item expectancy scale. Lower self-efficacy and higher expectancy were moderately associated with higher scores on the SDS-B. The scales provide reliable measures for assessing benzodiazepine self-efficacy and expectancies. Future research will examine the utility of the scales in prospective prediction of benzodiazepine cessation.

Alternative schooling programs for at risk youth : three case studies

This thesis develops a critical realist explanatory critique of alternative schooling programs for youth at risk taking place at three case study sites. Throughout the thesis the author pursues the question, \Are alternative provisions of schooling working academically and socially for youth at risk?. The academic lens targets literacy learning and associated pedagogies. Social outcomes are posited as positive social behaviours and continued engagement in learning. A four phased analysis, drawing on critical realism, interpretive and subject specific theories is used to elicit explanations for the research question. An overall framework is a critical realist methodology as set out by Danermark, Ekstrom, Jakobsen and Karlsson (2002, p. 129). Consequently phase one describes the phenomena of alternative schooling programs taking place at three case study sites. This is reported first as staff narratives that are resolved into imaginable historical causal components of \generative events., \prior schooling structures., \models of alternative schooling., \purpose., \individual agency., and \relations with linked community organisations.. Then transcendental questions are posed about each component using retroduction to uncover structures, underlying mechanisms and powers, and individual agency. In the second phase the researcher uses modified grounded theory methodology to theoretically redescribe causal categories related to a \needed different teaching and administrative approach. that emerged from the previous critique. A transcendental question is then applied to this redescription. The research phenomena are again theoretically redescribed in the third phase, this time using three theoretically based constructs associated with literacy and literacy pedagogies; the NRS, the 4 Resources Model, and Productive Pedagogies. This redescription is again questioned in terms of its core or \necessary. components. The fourth phase makes an explanatory critique by comparing and critiquing all previous explanations, recontextualising them in a wider macro reality of alternative schooling. Through this critical realist explanatory critiquing process, a response emerges not only to whether alternative provisions of schooling are working, but also how they are working, and how they are not working, with realistically based implications for future improvement.

Networks in the shadow of markets and hierarchies : calling the shots in the visual effects industry

The nature and organisation of creative industries and the creative economy has received increased attention in recent academic and policy literatures (Florida 2002; Grabher 2002; Scott 2006a). Constituted as one variant on new economy narratives, creativity, alongside knowledge, has been presented as a key competitive asset, Such industries – ranging from advertising, to film and new media – are seen as not merely expanding their scale and scope, but as leading edge proponents of a more general trend towards new forms of organization and economic coordination (Davis and Scase 2000). The idea of network forms (and the consequent displacement of markets and hierarchies) has been at the heart of attempts to differentiate the field economically and spatially. Across both the discussion of production models and work/employment relations is the assertion of the enhanced importance of trust and non-market relations in coordinating structures and practices. This reflects an influential view in sociological, management, geography and other literatures that social life is ‘intrinsically networked’ (Sunley 2008: 12) and that we can confidently use the term ‘network society’ to describe contemporary structures and practices (Castells 1996). Our paper is sceptical of the conceptual and empirical foundations of such arguments. We draw on a number of theoretical resources, including institutional theory, global value chain analysis and labour process theory (see Smith and McKinlay 2009) to explore how a more realistic and grounded analysis of the nature of and limits to networks can be articulated. Given space constraints, we cannot address all the dimensions of network arguments or evidence. Our focus is on inter and intra-firm relations and draws on research into a particular creative industry – visual effects – that is a relatively new though increasingly important global production network. Through this examination a different model of the creative industries and creative work emerges – one in which market rules and patterns of hierarchical interaction structure the behaviour of economic actors and remain a central focus of analysis. The next section outlines and unpacks in more detail arguments concerning the role and significance of networks, markets and hierarchies in production models and work organisation in creative industries and the ‘creative economy’.

Addressing Challenges for Internationalisation and Mobility in Engineering Through CDIO Standards

There is a growing need for international transparency of engineering qualifications, and mechanisms to support and facilitate student mobility. In response, there are a number of global initiatives attempting to address these needs, particularly in Europe, North America and Australia. The Conceive-Design-Implement-Operate (CDIO) Initiative has a set of standards, competencies, and proficiency levels developed through a global community of practice. It is a well-structured framework in which best-practice internationalisation and student mobility can be embedded. However, the current 12 CDIO Standards do not address international qualifications or student mobility. Based on an environmental scan of global activities, the underpinning principles of best practice are identified and form the basis of the proposed 13th CDIO Standard — “Internationalization and Mobility”.

Linkage and heritability analysis of migraine symptom groupings: A comparison of three different clustering methods on twin data

Migraine is a painful disorder for which the etiology remains obscure. Diagnosis is largely based on International Headache Society criteria. However, no feature occurs in all patients who meet these criteria, and no single symptom is required for diagnosis. Consequently, this definition may not accurately reflect the phenotypic heterogeneity or genetic basis of the disorder. Such phenotypic uncertainty is typical for complex genetic disorders and has encouraged interest in multivariate statistical methods for classifying disease phenotypes. We applied three popular statistical phenotyping methods—latent class analysis, grade of membership and grade of membership “fuzzy” clustering (Fanny)—to migraine symptom data, and compared heritability and genome-wide linkage results obtained using each approach. Our results demonstrate that different methodologies produce different clustering structures and non-negligible differences in subsequent analyses. We therefore urge caution in the use of any single approach and suggest that multiple phenotyping methods be used.

Structural and fire behaviour of a new light gauge steel wall system

Fire design is an essential element of the overall design procedure of structural steel members and systems. Conventionally the fire rating of load-bearing stud wall systems made of light gauge steel frames (LSF) is based on approximate prescriptive methods developed on the basis of limited fire tests. This design is limited to standard wall configurations used by the industry. Increased fire rating is provided simply by adding more plasterboards to the stud walls. This is not an acceptable situation as it not only inhibits innovation and structural and cost efficiencies but also casts doubt over the fire safety of these light gauge steel stud wall systems. Hence a detailed fire research study into the performance and effectiveness of a recently developed innovative composite panel wall system was undertaken at Queensland University of Technology using both full scale fire tests and numerical studies. Experimental results of LSF walls using the new composite panels under axial compression load have shown the improvement in fire performance and fire resistance rating. Numerical analyses are currently being undertaken using the finite element program ABAQUS. Measured temperature profiles of the studs are used in the numerical models and the results are used to calibrate against full scale test results. The validated model will be used in a detailed parametric study with an aim to develop suitable design rules within the current cold-formed steel structures and fire design standards. This paper will present the results of experimental and numerical investigations into the structural and fire behaviour of light gauge steel stud walls protected by the new composite panel. It will demonstrate the improvements provided by the new composite panel system in comparison to traditional wall systems.

Synthesis and modifications of metal oxide nanostructures and their applications

Transition metal oxides are functional materials that have advanced applications in many areas, because of their diverse properties (optical, electrical, magnetic, etc.), hardness, thermal stability and chemical resistance. Novel applications of the nanostructures of these oxides are attracting significant interest as new synthesis methods are developed and new structures are reported. Hydrothermal synthesis is an effective process to prepare various delicate structures of metal oxides on the scales from a few to tens of nanometres, specifically, the highly dispersed intermediate structures which are hardly obtained through pyro-synthesis. In this thesis, a range of new metal oxide (stable and metastable titanate, niobate) nanostructures, namely nanotubes and nanofibres, were synthesised via a hydrothermal process. Further structure modifications were conducted and potential applications in catalysis, photocatalysis, adsorption and construction of ceramic membrane were studied. The morphology evolution during the hydrothermal reaction between Nb2O5 particles and concentrated NaOH was monitored. The study demonstrates that by optimising the reaction parameters (temperature, amount of reactants), one can obtain a variety of nanostructured solids, from intermediate phases niobate bars and fibres to the stable phase cubes. Trititanate (Na2Ti3O7) nanofibres and nanotubes were obtained by the hydrothermal reaction between TiO2 powders or a titanium compound (e.g. TiOSO4·xH2O) and concentrated NaOH solution by controlling the reaction temperature and NaOH concentration. The trititanate possesses a layered structure, and the Na ions that exist between the negative charged titanate layers are exchangeable with other metal ions or H+ ions. The ion-exchange has crucial influence on the phase transition of the exchanged products. The exchange of the sodium ions in the titanate with H+ ions yields protonated titanate (H-titanate) and subsequent phase transformation of the H-titanate enable various TiO2 structures with retained morphology. H-titanate, either nanofibres or tubes, can be converted to pure TiO2(B), pure anatase, mixed TiO2(B) and anatase phases by controlled calcination and by a two-step process of acid-treatment and subsequent calcination. While the controlled calcination of the sodium titanate yield new titanate structures (metastable titanate with formula Na1.5H0.5Ti3O7, with retained fibril morphology) that can be used for removal of radioactive ions and heavy metal ions from water. The structures and morphologies of the metal oxides were characterised by advanced techniques. Titania nanofibres of mixed anatase and TiO2(B) phases, pure anatase and pure TiO2(B) were obtained by calcining H-titanate nanofibres at different temperatures between 300 and 700 °C. The fibril morphology was retained after calcination, which is suitable for transmission electron microscopy (TEM) analysis. It has been found by TEM analysis that in mixed-phase structure the interfaces between anatase and TiO2(B) phases are not random contacts between the engaged crystals of the two phases, but form from the well matched lattice planes of the two phases. For instance, (101) planes in anatase and (101) planes of TiO2(B) are similar in d spaces (~0.18 nm), and they join together to form a stable interface. The interfaces between the two phases act as an one-way valve that permit the transfer of photogenerated charge from anatase to TiO2(B). This reduces the recombination of photogenerated electrons and holes in anatase, enhancing the activity for photocatalytic oxidation. Therefore, the mixed-phase nanofibres exhibited higher photocatalytic activity for degradation of sulforhodamine B (SRB) dye under ultraviolet (UV) light than the nanofibres of either pure phase alone, or the mechanical mixtures (which have no interfaces) of the two pure phase nanofibres with a similar phase composition. This verifies the theory that the difference between the conduction band edges of the two phases may result in charge transfer from one phase to the other, which results in effectively the photogenerated charge separation and thus facilitates the redox reaction involving these charges. Such an interface structure facilitates charge transfer crossing the interfaces. The knowledge acquired in this study is important not only for design of efficient TiO2 photocatalysts but also for understanding the photocatalysis process. Moreover, the fibril titania photocatalysts are of great advantage when they are separated from a liquid for reuse by filtration, sedimentation, or centrifugation, compared to nanoparticles of the same scale. The surface structure of TiO2 also plays a significant role in catalysis and photocatalysis. Four types of large surface area TiO2 nanotubes with different phase compositions (labelled as NTA, NTBA, NTMA and NTM) were synthesised from calcination and acid treatment of the H-titanate nanotubes. Using the in situ FTIR emission spectrescopy (IES), desorption and re-adsorption process of surface OH-groups on oxide surface can be trailed. In this work, the surface OH-group regeneration ability of the TiO2 nanotubes was investigated. The ability of the four samples distinctively different, having the order: NTA > NTBA > NTMA > NTM. The same order was observed for the catalytic when the samples served as photocatalysts for the decomposition of synthetic dye SRB under UV light, as the supports of gold (Au) catalysts (where gold particles were loaded by a colloid-based method) for photodecomposition of formaldehyde under visible light and for catalytic oxidation of CO at low temperatures. Therefore, the ability of TiO2 nanotubes to generate surface OH-groups is an indicator of the catalytic activity. The reason behind the correlation is that the oxygen vacancies at bridging O2- sites of TiO2 surface can generate surface OH-groups and these groups facilitate adsorption and activation of O2 molecules, which is the key step of the oxidation reactions. The structure of the oxygen vacancies at bridging O2- sites is proposed. Also a new mechanism for the photocatalytic formaldehyde decomposition with the Au-TiO2 catalysts is proposed: The visible light absorbed by the gold nanoparticles, due to surface plasmon resonance effect, induces transition of the 6sp electrons of gold to high energy levels. These energetic electrons can migrate to the conduction band of TiO2 and are seized by oxygen molecules. Meanwhile, the gold nanoparticles capture electrons from the formaldehyde molecules adsorbed on them because of gold’s high electronegativity. O2 adsorbed on the TiO2 supports surface are the major electron acceptor. The more O2 adsorbed, the higher the oxidation activity of the photocatalyst will exhibit. The last part of this thesis demonstrates two innovative applications of the titanate nanostructures. Firstly, trititanate and metastable titanate (Na1.5H0.5Ti3O7) nanofibres are used as intelligent absorbents for removal of radioactive cations and heavy metal ions, utilizing the properties of the ion exchange ability, deformable layered structure, and fibril morphology. Environmental contamination with radioactive ions and heavy metal ions can cause a serious threat to the health of a large part of the population. Treatment of the wastes is needed to produce a waste product suitable for long-term storage and disposal. The ion-exchange ability of layered titanate structure permitted adsorption of bivalence toxic cations (Sr2+, Ra2+, Pb2+) from aqueous solution. More importantly, the adsorption is irreversible, due to the deformation of the structure induced by the strong interaction between the adsorbed bivalent cations and negatively charged TiO6 octahedra, and results in permanent entrapment of the toxic bivalent cations in the fibres so that the toxic ions can be safely deposited. Compared to conventional clay and zeolite sorbents, the fibril absorbents are of great advantage as they can be readily dispersed into and separated from a liquid. Secondly, new generation membranes were constructed by using large titanate and small ã-alumina nanofibres as intermediate and top layers, respectively, on a porous alumina substrate via a spin-coating process. Compared to conventional ceramic membranes constructed by spherical particles, the ceramic membrane constructed by the fibres permits high flux because of the large porosity of their separation layers. The voids in the separation layer determine the selectivity and flux of a separation membrane. When the sizes of the voids are similar (which means a similar selectivity of the separation layer), the flux passing through the membrane increases with the volume of the voids which are filtration passages. For the ideal and simplest texture, a mesh constructed with the nanofibres 10 nm thick and having a uniform pore size of 60 nm, the porosity is greater than 73.5 %. In contrast, the porosity of the separation layer that possesses the same pore size but is constructed with metal oxide spherical particles, as in conventional ceramic membranes, is 36% or less. The membrane constructed by titanate nanofibres and a layer of randomly oriented alumina nanofibres was able to filter out 96.8% of latex spheres of 60 nm size, while maintaining a high flux rate between 600 and 900 Lm–2 h–1, more than 15 times higher than the conventional membrane reported in the most recent study.

Planning and evaluation

Introduction: The core business of public health is to protect and promote health in the population. Public health planning is the means to maximise these aspirations. Health professionals develop plans to address contemporary health priorities as the evidence about changing patterns of mortality and morbidity is presented. Officials are also alert to international trends in patterns of disease that have the potential to affect the health of Australians. Integrated planning and preparation is currently underway involving all emergency health services, hospitals and population health units to ensure Australia's quick and efficient response to any major infectious disease outbreak, such as avian influenza (bird flu). Public health planning for the preparations for the Sydney Olympics and Paralympic Games in 2000 took almost three years. ‘Its major components included increased surveillance of communicable disease; presentations to sentinel emergency departments; medical encounters at Olympic venues; cruise ship surveillance; environmental and food safety inspections; bioterrorism surveillance and global epidemic intelligence’ (Jorm et al 2003, 102). In other words, the public health plan was developed to ensure food safety, hospital capacity, safe crowd control, protection against infectious diseases, and an integrated emergency and disaster plan. We have national and state plans for vaccinating children against infectious diseases in childhood; plans to promote dental health for children in schools; and screening programs for cervical, breast and prostate cancer. An effective public health response to a change in the distribution of morbidity and mortality requires planning. All levels of government plan for the public’s health. Local governments (councils) ensure healthy local environments to protect the public’s health. They plan parks for recreation, construct traffic-calming devices near schools to prevent childhood accidents, build shade structures and walking paths, and even embed drafts/chess squares in tables for people to sit and play. Environmental Health officers ensure food safety in restaurants and measure water quality. These public health measures attempt to promote the quality of life of residents. Australian and state governments produce plans that protect and promote health through various policy and program initiatives and innovations. To be effective, program plans need to be evaluated. However, building an integrated evaluation plan into a program plan is often forgotten, as planning and evaluation are seen as two distinct entities. Consequently, it is virtually impossible to measure, with any confidence, the extent to which a program has achieved its goals and objectives. This chapter introduces you to the concepts of public health program planning and evaluation. Case studies and reflection questions are presented to illustrate key points. As various authors use different terminology to describe the same concepts/actions of planning and evaluation, the glossary at the back of this book will help you to clarify the terms used in this chapter.

Framework and processes for enhancing sustainability deliverables in Australian road infrastructure projects

Road and highway infrastructure provides the backbone for a nation’s economic growth. The versatile dispersion of population in Australia and its resource boom, coupled with improved living standards and growing societal expectations, calls for continuing development and improvement of road infrastructure under the current local, state and federal governments’ policies and strategic plans. As road infrastructure projects involve huge resources and mechanisms, achieving sustainability not only on economic scales but also through environmental and social responsibility becomes a crucial issue. While sustainability is a logical link to infrastructure development, literature study and consultation with the industry found that there is a lack of common understanding on what constitutes sustainability in the infrastructure context. Its priorities are often interpreted differently among multiple stakeholders. For road infrastructure projects which typically span over long periods of time, achieving tangible sustainability outcomes during the lifecycle of development remains a formidable task. Sustainable development initiatives often remain ideological as in macro-level policies and broad-based concepts. There were little elaboration and exemplar cases on how these policies and concepts can be translated into practical decision-making during project implementation. In contrast, there seemed to be over commitment on research and development of sustainability assessment methods and tools. Between the two positions, there is a perception-reality gap and mismatch, specifically on how to enhance sustainability deliverables during infrastructure project delivery. Review on past research in this industry sector also found that little has been done to promote sustainable road infrastructure development; this has wide and varied potential impacts. This research identified the common perceptions and expectations by different stakeholders towards achieving sustainability in road and highway infrastructure projects. Face to face interviews on selected representatives of these stakeholders were carried out in order to select and categorize, confirm and prioritize a list of sustainability performance targets identified through literature and past research. A Delphi study was conducted with the assistance of a panel of senior industry professionals and academic experts, which further considered the interrelationship and influence of the sustainability indicators, and identified critical sustainability indicators under ten critical sustainability criteria (e.g. Environmental, Health & Safety, Resource Utilization & Management, Social & Cultural, Economic, Public Governance & Community Engagement, Relations Management, Engineering, Institutional and Project Management). This presented critical sustainability issues that needed to be addressed at the project level. Accordingly, exemplar highway development projects were used as case studies to elicit solutions for the critical issues. Through the identification and integration of different perceptions and priority needs of the stakeholders, as well as key sustainability indicators and solutions for critical issues, a set of decision-making guidelines was developed to promote and drive consistent sustainability deliverables in road infrastructure projects.