Properties of lignin and poly(hydroxybutyrate) blends

The Queensland University of Technology (QUT) allows the presentation of a thesis for the Degree of Doctor of Philosophy in the format of published or submitted papers, where such papers have been published, accepted or submitted during the period of candidature. This thesis is composed of Seven published/submitted papers and one poster presentation, of which five have been published and the other two are under review. This project is financially supported by the QUTPRA Grant. The twenty-first century started with the resurrection of lignocellulosic biomass as a potential substitute for petrochemicals. Petrochemicals, which enjoyed the sustainable economic growth during the past century, have begun to reach or have reached their peak. The world energy situation is complicated by political uncertainty and by the environmental impact associated with petrochemical import and usage. In particular, greenhouse gasses and toxic emissions produced by petrochemicals have been implicated as a significant cause of climate changes. Lignocellulosic biomass (e.g. sugarcane biomass and bagasse), which potentially enjoys a more abundant, widely distributed, and cost-effective resource base, can play an indispensible role in the paradigm transition from fossil-based to carbohydrate-based economy. Poly(3-hydroxybutyrate), PHB has attracted much commercial interest as a plastic and biodegradable material because some its physical properties are similar to those of polypropylene (PP), even though the two polymers have quite different chemical structures. PHB exhibits a high degree of crystallinity, has a high melting point of approximately 180°C, and most importantly, unlike PP, PHB is rapidly biodegradable. Two major factors which currently inhibit the widespread use of PHB are its high cost and poor mechanical properties. The production costs of PHB are significantly higher than for plastics produced from petrochemical resources (e.g. PP costs $US1 kg-1, whereas PHB costs $US8 kg-1), and its stiff and brittle nature makes processing difficult and impedes its ability to handle high impact. Lignin, together with cellulose and hemicellulose, are the three main components of every lignocellulosic biomass. It is a natural polymer occurring in the plant cell wall. Lignin, after cellulose, is the most abundant polymer in nature. It is extracted mainly as a by-product in the pulp and paper industry. Although, traditionally lignin is burnt in industry for energy, it has a lot of value-add properties. Lignin, which to date has not been exploited, is an amorphous polymer with hydrophobic behaviour. These make it a good candidate for blending with PHB and technically, blending can be a viable solution for price and reduction and enhance production properties. Theoretically, lignin and PHB affect the physiochemical properties of each other when they become miscible in a composite. A comprehensive study on structural, thermal, rheological and environmental properties of lignin/PHB blends together with neat lignin and PHB is the targeted scope of this thesis. An introduction to this research, including a description of the research problem, a literature review and an account of the research progress linking the research papers is presented in Chapter 1. In this research, lignin was obtained from bagasse through extraction with sodium hydroxide. A novel two-step pH precipitation procedure was used to recover soda lignin with the purity of 96.3 wt% from the black liquor (i.e. the spent sodium hydroxide solution). The precipitation process is presented in Chapter 2. A sequential solvent extraction process was used to fractionate the soda lignin into three fractions. These fractions, together with the soda lignin, were characterised to determine elemental composition, purity, carbohydrate content, molecular weight, and functional group content. The thermal properties of the lignins were also determined. The results are presented and discussed in Chapter 2. On the basis of the type and quantity of functional groups, attempts were made to identify potential applications for each of the individual lignins. As an addendum to the general section on the development of composite materials of lignin, which includes Chapters 1 and 2, studies on the kinetics of bagasse thermal degradation are presented in Appendix 1. The work showed that distinct stages of mass losses depend on residual sucrose. As the development of value-added products from lignin will improve the economics of cellulosic ethanol, a review on lignin applications, which included lignin/PHB composites, is presented in Appendix 2. Chapters 3, 4 and 5 are dedicated to investigations of the properties of soda lignin/PHB composites. Chapter 3 reports on the thermal stability and miscibility of the blends. Although the addition of soda lignin shifts the onset of PHB decomposition to lower temperatures, the lignin/PHB blends are thermally more stable over a wider temperature range. The results from the thermal study also indicated that blends containing up to 40 wt% soda lignin were miscible. The Tg data for these blends fitted nicely to the Gordon-Taylor and Kwei models. Fourier transform infrared spectroscopy (FT-IR) evaluation showed that the miscibility of the blends was because of specific hydrogen bonding (and similar interactions) between reactive phenolic hydroxyl groups of lignin and the carbonyl group of PHB. The thermophysical and rheological properties of soda lignin/PHB blends are presented in Chapter 4. In this chapter, the kinetics of thermal degradation of the blends is studied using thermogravimetric analysis (TGA). This preliminary investigation is limited to the processing temperature of blend manufacturing. Of significance in the study, is the drop in the apparent energy of activation, Ea from 112 kJmol-1 for pure PHB to half that value for blends. This means that the addition of lignin to PHB reduces the thermal stability of PHB, and that the comparative reduced weight loss observed in the TGA data is associated with the slower rate of lignin degradation in the composite. The Tg of PHB, as well as its melting temperature, melting enthalpy, crystallinity and melting point decrease with increase in lignin content. Results from the rheological investigation showed that at low lignin content (.30 wt%), lignin acts as a plasticiser for PHB, while at high lignin content it acts as a filler. Chapter 5 is dedicated to the environmental study of soda lignin/PHB blends. The biodegradability of lignin/PHB blends is compared to that of PHB using the standard soil burial test. To obtain acceptable biodegradation data, samples were buried for 12 months under controlled conditions. Gravimetric analysis, TGA, optical microscopy, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), FT-IR, and X-ray photoelectron spectroscopy (XPS) were used in the study. The results clearly demonstrated that lignin retards the biodegradation of PHB, and that the miscible blends were more resistant to degradation compared to the immiscible blends. To obtain an understanding between the structure of lignin and the properties of the blends, a methanol-soluble lignin, which contains 3× less phenolic hydroxyl group that its parent soda lignin used in preparing blends for the work reported in Chapters 3 and 4, was blended with PHB and the properties of the blends investigated. The results are reported in Chapter 6. At up to 40 wt% methanolsoluble lignin, the experimental data fitted the Gordon-Taylor and Kwei models, similar to the results obtained soda lignin-based blends. However, the values obtained for the interactive parameters for the methanol-soluble lignin blends were slightly lower than the blends obtained with soda lignin indicating weaker association between methanol-soluble lignin and PHB. FT-IR data confirmed that hydrogen bonding is the main interactive force between the reactive functional groups of lignin and the carbonyl group of PHB. In summary, the structural differences existing between the two lignins did not manifest itself in the properties of their blends.

Nurses driving change to improve access to education and quality in lcinical teaching : A partnership between Australia and Viet Nam

In Viet Nam, standards of nursing care fail to meet international competency standards. This increases risks to patient safety (eg. hospital acquired infection), consequently the Ministry of Health identified the need to strengthen nurse education in Viet Nam. This paper presents experiences of a piloted clinical teaching model developed in Ha Noi, to strengthen nurse led institutional capacity for in-service education and clinical teaching. Historically 90% of nursing education was conducted by physicians and professional development in hospitals for nurses was limited. There was minimal communication between hospitals and nursing schools about expectations of students and assessment and quality of the learning experience. As a result when students came to the clinical sites, no-one understood how to plan their learning objectives and utilise teaching and learning approaches appropriate to their level. Therefore student learning outcomes were variable. They focussed on procedures and techniques and “learning how to do” rather than learning how to plan, implement and evaluate patient care. This project is part of a multi-component capacity building program designed to improve nurse education in Viet Nam. The project was funded jointly by Queensland University of Technology (QUT) and the Australian Agency for International Development. Its aim was to develop a collaborative clinically-based model of teaching to create an environment that encourages evidence-based, student-centred clinical learning. Accordingly, strategies introduced promoted clinical teaching of competency based nursing practice utilising the regionally endorsed nurse core competency standards. Thirty nurse teachers from Viet Duc University Hospital and Hanoi Medical College participated in the program. These nurses and nurse teachers undertook face to face education in three workshops, and completed three assessment items. Assessment was applied, where participants integrated the concepts learned in each workshop and completed assessment tasks related to planning, implementing and evaluating teaching in the clinical area. Twenty of these participants were then selected to undertake a two week study tour in Brisbane, Australia where the clinical teaching model was refined and an action plan developed to integrate into both organisations with possible implementation across Viet Nam. Participants on this study tour also experienced clinical teaching and learning at QUT by attending classes held at the university, and were able to visit selected hospitals to experience clinical teaching in these settings as well. Effectiveness of the project was measured throughout the implementation phase and in follow up visits to the clinical site. To date changes have been noted on an individual and organisational level. There is also significant planning underway to incorporate the clinical teaching model developed across the organisation and how this may be implemented in other regions. Two participants have also been involved in disseminating aspects of this approach to clinical teaching in Ho Chi Minh, with further plans for more in-depth dissemination to occur throughout the country.

Performance control of distributed generation using digital estimation of signal parameters

The Queensland University of Technology (QUT) allows the presentation of a thesis for the Degree of Doctor of Philosophy in the format of published or submitted papers, where such papers have been published, accepted or submitted during the period of candidature. This thesis is composed of seven published/submitted papers, of which one has been published, three accepted for publication and the other three are under review. This project is financially supported by an Australian Research Council (ARC) Discovery Grant with the aim of proposing strategies for the performance control of Distributed Generation (DG) system with digital estimation of power system signal parameters. Distributed Generation (DG) has been recently introduced as a new concept for the generation of power and the enhancement of conventionally produced electricity. Global warming issue calls for renewable energy resources in electricity production. Distributed generation based on solar energy (photovoltaic and solar thermal), wind, biomass, mini-hydro along with use of fuel cell and micro turbine will gain substantial momentum in the near future. Technically, DG can be a viable solution for the issue of the integration of renewable or non-conventional energy resources. Basically, DG sources can be connected to local power system through power electronic devices, i.e. inverters or ac-ac converters. The interconnection of DG systems to power system as a compensator or a power source with high quality performance is the main aim of this study. Source and load unbalance, load non-linearity, interharmonic distortion, supply voltage distortion, distortion at the point of common coupling in weak source cases, source current power factor, and synchronism of generated currents or voltages are the issues of concern. The interconnection of DG sources shall be carried out by using power electronics switching devices that inject high frequency components rather than the desired current. Also, noise and harmonic distortions can impact the performance of the control strategies. To be able to mitigate the negative effect of high frequency and harmonic as well as noise distortion to achieve satisfactory performance of DG systems, new methods of signal parameter estimation have been proposed in this thesis. These methods are based on processing the digital samples of power system signals. Thus, proposing advanced techniques for the digital estimation of signal parameters and methods for the generation of DG reference currents using the estimates provided is the targeted scope of this thesis. An introduction to this research – including a description of the research problem, the literature review and an account of the research progress linking the research papers – is presented in Chapter 1. One of the main parameters of a power system signal is its frequency. Phasor Measurement (PM) technique is one of the renowned and advanced techniques used for the estimation of power system frequency. Chapter 2 focuses on an in-depth analysis conducted on the PM technique to reveal its strengths and drawbacks. The analysis will be followed by a new technique proposed to enhance the speed of the PM technique while the input signal is free of even-order harmonics. The other techniques proposed in this thesis as the novel ones will be compared with the PM technique comprehensively studied in Chapter 2. An algorithm based on the concept of Kalman filtering is proposed in Chapter 3. The algorithm is intended to estimate signal parameters like amplitude, frequency and phase angle in the online mode. The Kalman filter is modified to operate on the output signal of a Finite Impulse Response (FIR) filter designed by a plain summation. The frequency estimation unit is independent from the Kalman filter and uses the samples refined by the FIR filter. The frequency estimated is given to the Kalman filter to be used in building the transition matrices. The initial settings for the modified Kalman filter are obtained through a trial and error exercise. Another algorithm again based on the concept of Kalman filtering is proposed in Chapter 4 for the estimation of signal parameters. The Kalman filter is also modified to operate on the output signal of the same FIR filter explained above. Nevertheless, the frequency estimation unit, unlike the one proposed in Chapter 3, is not segregated and it interacts with the Kalman filter. The frequency estimated is given to the Kalman filter and other parameters such as the amplitudes and phase angles estimated by the Kalman filter is taken to the frequency estimation unit. Chapter 5 proposes another algorithm based on the concept of Kalman filtering. This time, the state parameters are obtained through matrix arrangements where the noise level is reduced on the sample vector. The purified state vector is used to obtain a new measurement vector for a basic Kalman filter applied. The Kalman filter used has similar structure to a basic Kalman filter except the initial settings are computed through an extensive math-work with regards to the matrix arrangement utilized. Chapter 6 proposes another algorithm based on the concept of Kalman filtering similar to that of Chapter 3. However, this time the initial settings required for the better performance of the modified Kalman filter are calculated instead of being guessed by trial and error exercises. The simulations results for the parameters of signal estimated are enhanced due to the correct settings applied. Moreover, an enhanced Least Error Square (LES) technique is proposed to take on the estimation when a critical transient is detected in the input signal. In fact, some large, sudden changes in the parameters of the signal at these critical transients are not very well tracked by Kalman filtering. However, the proposed LES technique is found to be much faster in tracking these changes. Therefore, an appropriate combination of the LES and modified Kalman filtering is proposed in Chapter 6. Also, this time the ability of the proposed algorithm is verified on the real data obtained from a prototype test object. Chapter 7 proposes the other algorithm based on the concept of Kalman filtering similar to those of Chapter 3 and 6. However, this time an optimal digital filter is designed instead of the simple summation FIR filter. New initial settings for the modified Kalman filter are calculated based on the coefficients of the digital filter applied. Also, the ability of the proposed algorithm is verified on the real data obtained from a prototype test object. Chapter 8 uses the estimation algorithm proposed in Chapter 7 for the interconnection scheme of a DG to power network. Robust estimates of the signal amplitudes and phase angles obtained by the estimation approach are used in the reference generation of the compensation scheme. Several simulation tests provided in this chapter show that the proposed scheme can very well handle the source and load unbalance, load non-linearity, interharmonic distortion, supply voltage distortion, and synchronism of generated currents or voltages. The purposed compensation scheme also prevents distortion in voltage at the point of common coupling in weak source cases, balances the source currents, and makes the supply side power factor a desired value.

Philosophy, behaviour disorders, and the school

The recent exponential rise in the number of behaviour disorders has been the focus of a wide range of commentaries, ranging from the pedagogic and the administrative, to the sociological, and even the legal. This book will be the first to apply, in a systematic and thorough manner, the ideas of the foundational discipline of philosophy. A number of philosophical tools are applied here, tools arising through the medium of the traditional philosophical debates, such as those concerning governance, truth, logic, ethics, free-will, law and language. Each forms a separate chapter, but together they constitute a comprehensive, rigorous and original insight into what is now an important set of concerns for all those interested in the governance of children. The intention is threefold: first, to demonstrate the utility, accessibility and effectiveness of philosophical ideas within this important academic area. Philosophy does not have to be regarded an arcane and esoteric discipline, with only limited contemporary application, far from it. Second, the book offers a new set of approaches and ideas for both researchers and practitioners within education, a field is in danger of continually using the same ideas, to endlessly repeat the same conclusions. Third, the book offers a viable alternative to the dominant psychological model which increasingly employs pathology as its central rationale for conduct. The book would not only be of interest to mainstream educators, and to those students and academics interested in philosophy, and more specifically, the application of philosophical ideas to educational issues, it would also be an appropriate text for courses on education and difference, and due to the breadth of the philosophical issues addressed, courses on applied philosophy.

Professional growth through working together : a study of reciprocal benefits for teacher and education advisor through classroom based professional development

Teacher professional development provided by education advisors as one-off, centrally offered sessions does not always result in change in teacher knowledge, beliefs, attitudes or practice in the classroom. As the mathematics education advisor in this study, I set out to investigate a particular method of professional development so as to influence change in a practising classroom teacher’s knowledge and practices. The particular method of professional development utilised in this study was based on several principles of effective teacher professional development and saw me working regularly in a classroom with the classroom teacher as well as providing ongoing support for her for a full school year. The intention was to document the effects of this particular method of professional development in terms of the classroom teacher’s and my professional growth to provide insights for others working as education advisors. The professional development for the classroom teacher consisted of two components. The first was the co-operative development and implementation of a mental computation instructional program for the Year 3 class. The second component was the provision of ongoing support for the classroom teacher by the education advisor. The design of the professional development and the mental computation instructional program were progressively refined throughout the year. The education advisor fulfilled multiple roles in the study as teacher in the classroom, teacher educator working with the classroom teacher and researcher. Examples of the professional growth of the classroom teacher and the education advisor which occurred as sequences of changes (growth networks, Hollingsworth, 1999) in the domains of the professional world of the classroom teacher and education advisor were drawn from the large body of data collected through regular face-to-face and email communications between the classroom teacher and the education advisor as well as from transcripts of a structured interview. The Interconnected Model of Professional Growth (Clarke & Hollingsworth, 2002; Hollingsworth, 1999) was used to summarise and represent each example of the classroom teacher’s professional growth. A modified version of this model was used to summarise and represent the professional growth of the education advisor. This study confirmed that the method of professional development utilised could lead to significant teacher professional growth related directly to her work in the classroom. Using the Interconnected Model of Professional Growth to summarise and represent the classroom teacher’s professional growth and the modified version for my professional growth assisted with the recognition of examples of how we both changed. This model has potential to be used more widely by education advisors when preparing, implementing, evaluating and following-up on planned teacher professional development activities. The mental computation instructional program developed and trialled in the study was shown to be a successful way of sequencing and managing the teaching of mental computation strategies and related number sense understandings to Year 3 students. This study was conducted in one classroom, with one teacher in one school. The strength of this study was the depth of teacher support provided made possible by the particular method of the professional development, and the depth of analysis of the process. In another school, or with another teacher, this might not have been as successful. While I set out to change my practice as an education advisor I did not expect the depth of learning I experienced in terms of my knowledge, beliefs, attitudes and practices as an educator of teachers. This study has changed the way in which I plan to work as an education advisor in the future.

Re-thinking physics teaching with web-based learning

There is extensive uptake of ICT in the teaching of science but more evidence is needed on how ICT impacts on the learning practice and the learning outcomes at the classroom level. In this study, a physics website (Getsmart) was developed using the cognitive apprenticeship framework for students at a high school in Australia. This website was designed to enhance students’ knowledge of concepts in physics. Reflexive pedagogies were used in the delivery learning materials in a blended learning environment. The students in the treatment group accessed the website over a 10 week period. Pre and post-test results of the treatment (N= 48) and comparison group (N=32) were compared. The MANCOVA analysis showed that the web-based learning experience benefited the students in the treatment group. It not only impacted on the learning outcomes, but qualitative data from the students suggested that it had a positive impact on their attitudes towards studying physics in a blended environment.

Second Life machinima enhancing the learning of law : Lessons from successful endeavours

A traditional approach centred on weekly lectures, perhaps supported by a tutorial programme, still predominates in modern legal education in Australia. This approach tends to focus on the transmission of knowledge about legal rules and doctrine to students who adopt a largely passive role. Criticisms of the traditional approach have led to law schools expanding their curricula to include the teaching of skills, including the skill of negotiation and an appreciation of legal ethics and professional responsibility. However, in a climate of limited government funding for law schools in Australia, innovation in legal education remains a challenge. This paper considers the successful use of Second Life machinima in two programs, Air Gondwana and Entry into Valhalla and their part in the creation of engaging, effective learning environments. These programs not only engage students in active learning but also facilitate flexibility in their studies and other benefits. The programs yield important lessons concerning the use of machinima innovations in curricula, not only for academics involved in legal education but also those in other disciplines, especially those that rely on traditional passive lectures in their teaching and learning approaches.

Towards teaching in partnership : lessons still to be learned

This article seeks to analyse current dilemmas in responding to calls to narrow 'the gap' between academic and school culture in the area of preservice teacher preparation. It critiques traditional practices and current policies which focus on the narrowly vocational at the expense of the contextual. Further, it acknowledges the problems in the teaching of theory as it has been traditionally understood. Finally, it assesses the benefits for teachers and academics of forms of pedagogical partnership and the likelihood of progress in this area, and suggest that a number of fundamental changes need to be made in academic culture for genuine partnerships to become a reality.

The future of design

When asked about the future of design, I immediately think of two things. Firstly, I am drawn to the concept of design thinking - the process individuals go through when critically evaluating a situation, place, space or circumstance and reframing it. Design thinking is the critical reframing process. Secondly, my thoughts turn to education and the teaching of design thinking and the late philosopher John Dewey (1910:139), who states...

The Australian curriculum : implications for teaching and assessment

Teachers will be aware of the raft of educational changes introduced recently and also of the associated challenges and opportunities that such educational reforms present. This PETAA Paper commences with an overview of the major educational changes and how they impinge on teachers’ classroom practice in the teaching of English and makes explicit the implications for policy support. This article aims to provide teachers with some insight into how they might respond in their teaching to develop their own assessment and pedagogic practices and in so doing support students to improve in their learning and to achieve higher standards. A group of teachers’ classroom practice, which has applicability to both Upper Primary and Middle School English teaching, is analysed to demonstrate how these teachers have pedagogically incorporated some of the ‘general capabilities’ and a cross-curriculum priority of ‘Aboriginal and Torres Strait Islander histories and cultures’ into their classroom practice.

Innovative approaches to teaching engineering drawing at tertiary institutions

This paper arises from our concern for the level of teaching of engineering drawing at tertiary institutions in Australia. Little attention is paid to teaching hand drawing and tolerancing. Teaching of engineering drawing is usually limited to computer-aided design (CAD) using AutoCAD or one of the solid-modelling packages. As a result, many engineering graduates have diffi culties in understanding how views are produced in different projection angles, are unable to produce engineering drawings of professional quality, or read engineering drawings, and unable to select fits and limits or surface roughness. In the Faculty of Built Environment and Engineering at the Queensland University of Technology new approaches to teaching engineering drawing have been introduced. In this paper the results of these innovative approaches are examined through surveys and other research methods.

Multimodal approaches to reflective teaching and assessment in higher education

Reflection is not a new concept in the teaching of higher education and is often an important component of many disciplinary courses. Despite this, past research shows that whilst there are examples of rich reflective strategies used in some areas of higher education, most approaches to and conceptualisations of reflective learning and assessment have been perfunctory and inconsistent. In many disciplinary areas reflection is often assessed as a written activity ‘tagged onto’ assessment practices. In creative disciplines however, reflective practice is an integral and cumulative form of learning and is often expressed in ways other than in the written form. This paper will present three case studies of reflective practice in the area of Creative Industries in higher education – Dance, Fashion and Music. It will discuss the ways in which higher education teachers and students use multi-modal approaches to expressing knowledge and reflective practice in context. The paper will argue that unless students are encouraged to participate in deep reflective disciplinary discourse via multi-modes then reflection will remain superficial in the higher education context.

A snapshot of capstone courses in Australian business schools

Capstone courses are compulsory units usually offered in the last year, and often in the last semester, of a degree program. Ideally, they incorporate, consolidate and apply previously acquired knowledge, skills and experiential learning, rather than providing new information and skills. This presentation reports on findings of an Australian Teaching and Learning Council (ALTC) Projecti that explores the teaching of capstone courses in university Business Schools. In particular, it analyses comprehensive data collected via a national audit of all business capstone courses conducted in 2010-2011, based on information on university websites. Using this data, we reconsider the capstone ‘model’, classifying capstones in a way that goes beyond simple typologies in the literature, and reviewing approaches to teaching them. Although there is a common understanding amongst lecturers about the aims of capstone courses and the need to make students ‘workplace ready’, this presentation will provide more detailed analysis demonstrating the diversity of actual practices with respect to assessment, format and new content. These are important concerns related to student success in the workplace.

Networked reading : using AustLit to assist reading and understanding of texts from the past

In response to a focus on reading, this paper examines the notion of reading online; as such it uses the term ‘networked reading’ to describe any act of reading in an online or digital environment. In accordance with this notion of ‘networked’ reading, the paper provides a broad introduction to AustLit: the Australian Literature Resource. This is followed by an examination of a suite of services and digital tools (LORE) developed by the Aus-e-Lit project that extends the scope of AustLit records and facilitates links to external resources. The focus of the final section of the paper is on a collection of Full Text resources located within the AustLit subset Children’s Literature Digital Resources (CLDR). It proposes a number of ways in which these texts, and an accompanying anthology of critical articles, can be utilised in classrooms across the Primary, Middle and Senior School spectrum.

Destination know-where : a road map of a PhD journey in theatre for young people

Within contemporary performance arenas young people are fast becoming part of the vanguard of contemporary performance. Performativity, convergence and openness of form are key animating concepts in the landscape of Theatre for Young People (TYP). To ignore what is taking place in the making of performance for and by young people is to ignore the new possibilities in meaning-making and theatrical form. This thesis investigates the contemporary practice within the field of Theatre for Young People. Pivotal to the study are three hallmarks of contemporary performance – shifting notions of performativity; convergence articulated in the use of technology and theatrical genres; and Umberto Eco’s realisation of openness in form and authorship. The thesis draws from theatre and performance studies, globalisation theory and youth studies. Using interviews of Theatre for Young People practitioners and observation of thirty-nine performances, this thesis argues that young people and Theatre for Young People companies are among the leaders of a paradigm shift in developing and delivering performance works. In this period of rapid technological change young people are embracing and manipulating technology (sound, image, music) to represent whom they are and what they want to say. Positioned as ‘cultural catalysts’ (McRobbie, 1999), ‘the new pioneers’ (Mackay, 1993) and ‘first navigators’ (Rushkoff, 1996) young people are using mediatised culture and digital technologies with ease, placing them at the forefront of a shift in cultural production. The processes of deterritorialisation allows for the synthesis of new cultural and performance genres by fragmenting and hybridising traditional cultural categories and forms including the use of new media technologies. Almost half of all TYP performances now incorporate the technologies of reproduction. The relationship between live and mediatised forms, the visceral and the virtual is allowing young people to navigate and make meaning of cultural codes and cultural forms as well as to engage in an open dialogue with their audiences. This thesis examines the way young people are using elements of deterritorialisation to become producers of new performance genres. The thesis considers the contemporary situation in relation to issues of performance making and performance delivery within a global, networked and technology-driven society.