The potential of combining phenomenography, variation theory and threshold concepts to inform curriculum design in higher education

This chapter describes an innovative method of curriculum design that is based on combining phenomenographic research, and the associated variation theory of learning, with the notion of disciplinary threshold concepts to focus specialised design attention on the most significant and difficult parts of the curriculum. The method involves three primary stages: (i) identification of disciplinary concepts worthy of intensive curriculum design attention, using the criteria for threshold concepts; (ii) action research into variation in students’ understandings/misunderstandings of those concepts, using phenomenography as the research approach; (iii) design of learning activities to address the poorer understandings identified in the second stage, using variation theory as a guiding framework. The curriculum design method is inherently theory and evidence based. It was developed and trialed during a two-year project funded by the Australian Learning and Teaching Council, using physics and law disciplines as case studies. Disciplinary teachers’ perceptions of the impact of the method on their teaching and understanding of student learning were profound. Attempts to measure the impact on student learning were less conclusive; teachers often unintentionally deviated from the design when putting it into practice for the first time. Suggestions for improved implementation of the method are discussed.

Academic Development Program : QUT University Wide

The QUT Sessional Academic Program (SAP) has scaffolded levels, each with experience-appropriate objectives: • SAP 1: Introduction to Learning and Teaching aims to develop confidence and build awareness of pedagogy and managing class-room scenarios. • SAP 2: Learning and Teaching in Large Units focuses on aligning curriculum and assessment through learning activities and builds a community of teaching practice with sessionals and subject coordinators. • SAP 3: Developing your Teaching Practice focuses on whole of university and classroom strategies to ensure student success through effective feedback; reflective practice and learning communities. • SAP 4: Enhancing your Teaching Practice applies these factors to teaching success. In conjunction with: • Sessional Career Advancement Development: for Higher Degree Research students/ sessional staff who aspire to become academics provides guidance on developing an academic portfolio in teaching, research and service. And • Sessional Academic Success program providing ongoing, local support (see separate nomination). A critical factor in its success is its praxis approach. Theoretical principles are modelled. Eg, ‘active learning’ is explained and modelled through learning activities, which participants evaluate ‘on the fly’ against the criteria of learning, engagement and connection with peers. The topics ‘learning communities’ and ‘reflective practice’ are explored as a learning community–then applied in participants’ classes, with reflections shared in the next session. This produces a ‘meta-awareness’ of theory and principles, as they are explained, applied in practice, and critically analysed for their effectiveness in workshops.

'Explain in plain English' questions revisited : data structures problems

Recent studies have linked the ability of novice (CS1) programmers to read and explain code with their ability to write code. This study extends earlier work by asking CS2 students to explain object-oriented data structures problems that involve recursion. Results show a strong correlation between ability to explain code at an abstract level and performance on code writing and code reading test problems for these object-oriented data structures problems. The authors postulate that there is a common set of skills concerned with reasoning about programs that explains the correlation between writing code and explaining code. The authors suggest that an overly exclusive emphasis on code writing may be detrimental to learning to program. Non-code writing learning activities (e.g., reading and explaining code) are likely to improve student ability to reason about code and, by extension, improve student ability to write code. A judicious mix of code-writing and code-reading activities is recommended.

Becoming a pharmacist : the role of curriculum in professional identity formation

Objective To understand how the formal curriculum experience of an Australian undergraduate pharmacy program supports students’ professional identity formation. Methods A qualitative ethnographic study was conducted over four weeks using participant observation and examined the ‘typical’ student experience from the perspective of a pharmacist. A one-week period of observation was undertaken with each of the four year groups (that is, for years one to four) comprising the undergraduate curriculum. Data were collected through observation of the formal curriculum experience using field notes, a reflective journal and informal interviews with 38 pharmacy students. Data were analyzed thematically using an a priori analytical framework. Results Our findings showed that the observed curriculum was a conventional curricular experience which focused on the provision of technical knowledge and provided some opportunities for practical engagement. There were some opportunities for students to imagine themselves as pharmacists, for example, when the lecture content related to practice or teaching staff described their approach to practice problems. However, there were limited opportunities for students to observe pharmacist role models, experiment with being a pharmacist or evaluate their professional identities. While curricular learning activities were available for students to develop as pharmacists e.g. patient counseling, there was no contact with patients and pharmacist academic staff tended to role model as educators with little evidence of their pharmacist selves. Conclusion These findings suggest that the current conventional approach to the curriculum design may not be fully enabling learning experiences which support students in successfully negotiating their professional identities. Instead it appeared to reinforce their identities as students with a naïve understanding of professional practice, making their future transition to professional practice challenging.

Designing and evaluating an online role play in conflict management

Purpose This paper aims to identify, through a literature review, key issues regarding how online role plays can be designed and to apply them when designing a role play on conflict management. Design/methodology/approach By drawing on the key issues identified in the literature review, a role play on conflict management was designed and evaluated. Data were collected by developing a survey that focused on perceived learning, participation and satisfaction. Findings Overall, a majority of the students felt that they learned and participated in the role play. The most positive finding was that the students were satisfied with their role play experience. Research limitations/implications Researchers are urged to further develop the dimensions and measures of online role play success. The measures that were developed for evaluating perceived learning, participation and satisfaction with role plays can be further developed and tested. It is suggested that the effects on learning need to be further explored. Practical implications It is suggested that teachers take the identified key issues of online role play design into account. An important challenge seems to be to encourage students to reflect and do additional reading and research in relation with online role plays. Originality/value Online collaboration is commonly argued as beneficial from an e-learning perspective. However, a challenge for research and practice is to learn how collaborative e-learning activities may be developed. This paper contributes by focusing on how online role plays can be designed and evaluated.

goDesign

This research project (September 2009 - ongoing) builds on initial research funded by a 2009 QUT Engagement Innovation Grant, which examined the benefits for rural and regional communities linking with tertiary institutions and design practitioners, to participate in design-based learning activities. During the program, students and teachers were given the opportunity to explore, analyse and re-imagine their local town through a series of scaffolded problem solving activities around the theme of ‘place’. Underpinning the program is Dr Charles Burnette’s (1993) IDESIGN teaching model and a place-based approach that ‘draws upon local cultural, environmental, economic and political concerns’ (Smith, G.A. 2007, p18).

Paediatric Nursing in Australia

Paediatric Nursing in Australia equips students with the essential skills and knowledge to become paediatric, child and youth health nurses across a variety of clinical and community settings. It prepares students for critical thinking and problem solving within this field by emphasising contemporary issues impacting on the health of children, young people and their families. Written by a team of experienced paediatric nurses, the content is based on themes that align with Australian standards of competence and expectations of paediatric nursing: communication, family involvement and evidence-based practice. Comprehensive yet concise, the text examines the integration of theoretical and clinical components of nursing knowledge. To enhance learning, chapters feature case studies, reflection points and learning activities. An essential resource for nursing students, this text is grounded in current care delivery and professional issues for care of the child to prepare future nurses for evidence-based practice in paediatric settings throughout Australia. • Prepares students for critical thinking and problem solving within paediatric, child and youth health nursing by emphasising contemporary issues that impact on the health of children and young people and their families • Written by a team of experienced paediatric nurses • Enhances learning by providing illustrative case studies, reflection points and learning activities in each chapter

Integrating ‘role play’ in assessment to strengthen professional conduct and accountability of students : a pilot study

BACKGROUND In a process engineering setting, graduates are frequently allocated reviews of existing operations or required to scope new production processes by their supervisors with a view to improving or expanding on operations and overall productivity. These tasks may be carried out in teams and in consultation with the process engineer’s immediate line manager or a more experienced engineer, such as the Production or Maintenance Manager; ultimately reporting to senior management, which is frequently a non-engineer. Although professional skills development is part of engineering curricula, ‘professional conduct’ and ‘accountability’ required for dealing with peers and superiors in industry is not very well addressed at university. Consequently, upon graduation, many students are, in terms of knowledge and experience in this area, underprepared to work effectively in industry settings. PURPOSE The purpose of this study was to develop and implement a role-play scenario within a core 2nd year process engineering unit, so that students could gain knowledge, skills and experience in different aspects (and nuances) of professional conduct and accountability. DESIGN/METHOD In the role-play scenario, students worked in ‘engineering production teams’ to design a process for an iconic Queensland fruitcake and to present their solution and recommendations (culminating in a poster presentation) to an assessment panel consisting of staff, role-playing as, ‘production and plant managers’. Students were assessed on several areas, including professionalism using a criteria referenced assessment guide by a 3-member cross-disciplinary staff panel consisting of a Business Faculty lecturer, an engineer from industry and the lecturer of the Process Engineering unit. Professional conduct and accountability was gauged through direct questioning by the panel. Feedback was also sought from students on various aspects through a survey questionnaire after the role play activity at the end of semester. RESULTS Overall, the role play was very well performed with students achieving an average score of 79.3/100 (distinction grade). Professional conduct as assessed by panel was on average better than scores given for professional accountability (4.0 compared with 3.6 out of 5). Feedback from students indicated that the learning activities had contributed to their overall understanding of the content and the role of process engineers. Industry involvement was rated very highly as contributing to their learning at 4.8 (on Likert scale from 1 – 5) and the poster presentation was rated at 3.6. CONCLUSIONS This pilot study was successful in implementing a new assessment task for modelling professional conduct and accountability within a 2nd year core unit. This task incorporated a role-play activity and there was evidence to suggest that this and associated learning tasks were successful in broadening students’ understanding and skills in this area required for engineering practice. Following feedback given by students and staff, improvements will be made to the nature of the problem, how it is defined, its assessment, and the approach taken in the role-play scenario when the unit is offered in 2014.

Afterschool MediaClub: Critical literacy in a high diversity, high poverty urban setting

In this chapter we present analyses of data produced with young people in an afterschool digital literacy program for 9 – 12 year olds. The young people were students at a high diversity, high poverty outer suburban elementary school in Queensland, Australia. The club was part of the URLearning research project (2010-14). In the classroom-based component of the project we worked with teachers to develop intellectually substantive and critical digital literacy practice. MediaClub was in some ways complementary to the classroom component; it was designed to skill up interested kids as digital media experts not only for their families and communities, but also for the classroom. Given the critical literacy traditions established in Australian schools, we approached MediaClub with certain critical expectations. In this chapter we look at what ensued, highlighting unanticipated critical outcomes at a time of heightened struggle over English curriculum. Critical literacy has been part of official English curriculum in Queensland since the early 1990s. The approach has been primarily text analytic, concerned with giving students access to genres of power and tools for understanding the ideological work of language through text. Many ideas for translating this normative critical project into classroom practice have been developed for use from the earliest elementary grades onwards. However, curricular space for critical literacy is under pressure. Amongst other things, this reflects both the development of Australia’s first national curriculum and the construction of a regimen of national literacy testing. At MediaClub we found a certain resistance to learning activities which were “too much like school”. However, in a context of increased control of teachers’ and students’ work in the classroom, MediaClub evolved as a learning space that can be understood in critical terms. Our experience in this regard might be of interest to teachers and researchers in high diversity high poverty settings that are strongly controlled through increasingly prescriptive – even scripted – pedagogies.

SOTrain: A new program for training supervisors and operators in Australian sugar factories

The provision of effective training of supervisors and operators is essential if sugar factories are to operate profitably and in an environmentally sustainable and safe manner. The benefits of having supervisor and operator staff with a high level of operational skills are reduced stoppages, increased recovery, improved sugar quality, reduced damage to equipment, and reduced OH&S and environmental impacts. Training of new operators and supervisors in factories has traditionally relied on on-the-job training of the new or inexperienced staff by experienced supervisors and operators, supplemented by courses conducted by contractors such as Sugar Research Institute (SRI). However there is clearly a need for staff to be able to undertake training at any time, drawing on the content of online courses as required. An improved methodology for the training of factory supervisors and operators has been developed by QUT on behalf of a syndicate of mills. The new methodology provides ‘at factory’ learning via self-paced modules. Importantly, the training resources for each module are designed to support the training programs within sugar factories, thereby establishing a benchmark for training across the sugar industry. The modules include notes, training guides and session plans, guidelines for walkthrough tours of the stations, learning activities, resources such as videos, animations, job aids and competency assessments. The materials are available on the web for registered users in Australian Mills and many activities are best undertaken online. Apart from a few interactive online resources, the materials for each module can also be downloaded. The acronym SOTrain (Supervisor and Operator Training) has been applied to the new training program.

Structure matters: Adoption of structured classification Approach in the context of cognitive presence classification

Within online learning communities, receiving timely and meaningful insights into the quality of learning activities is an important part of an effective educational experience. Commonly adopted methods – such as the Community of Inquiry framework – rely on manual coding of online discussion transcripts, which is a costly and time consuming process. There are several efforts underway to enable the automated classification of online discussion messages using supervised machine learning, which would enable the real-time analysis of interactions occurring within online learning communities. This paper investigates the importance of incorporating features that utilise the structure of on-line discussions for the classification of "cognitive presence" – the central dimension of the Community of Inquiry framework focusing on the quality of students' critical thinking within online learning communities. We implemented a Conditional Random Field classification solution, which incorporates structural features that may be useful in increasing classification performance over other implementations. Our approach leads to an improvement in classification accuracy of 5.8% over current existing techniques when tested on the same dataset, with a precision and recall of 0.630 and 0.504 respectively.

Abstract concepts made real: A pilot study examining pedagogical approaches in thermodynamics tutorials

BACKGROUND OR CONTEXT Thermodynamics is a core concept for mechanical engineers yet notoriously difficult. Evidence suggests students struggle to understand and apply the core fundamental concepts of thermodynamics with analysis indicating a problem with student learning/engagement. A contributing factor is that thermodynamics is a ‘science involving concepts based on experiments’ (Mayhew 1990) with subject matter that cannot be completely defined a priori. To succeed, students must engage in a deep-holistic approach while taking ownership of their learning. The difficulty in achieving this often manifests itself in students ‘not getting’ the principles and declaring thermodynamics ‘hard’. PURPOSE OR GOAL Traditionally, students practice and “learn” the application of thermodynamics in their tutorials, however these do not consider prior conceptions (Holman & Pilling 2004). As ‘hands on’ learning is the desired outcome of tutorials it is pertinent to study methods of improving their efficacy. Within the Australian context, the format of thermodynamics tutorials has remained relatively unchanged over the decades, relying anecdotally on a primarily didactic pedagogical approach. Such approaches are not conducive to deep learning (Ramsden 2003) with students often disengaged from the learning process. Evidence suggests (Haglund & Jeppsson 2012), however, that a deeper level and ownership of learning can be achieved using a more constructivist approach for example through self generated analogies. This pilot study aimed to collect data to support the hypothesis that the ‘difficulty’ of thermodynamics is associated with the pedagogical approach of tutorials rather than actual difficulty in subject content or deficiency in students. APPROACH Successful application of thermodynamic principles requires solid knowledge of the core concepts. Typically, tutorial sessions guide students in this application. However, a lack of deep and comprehensive understanding can lead to student confusion in the applications resulting in the learning of the ‘process’ of application without understanding ‘why’. The aim of this study was to gain empirical data on student learning of both concepts and application, within thermodynamic tutorials. The approach taken for data collection and analysis was: - 1 Four concurrent tutorial streams were timetabled to examine student engagement/learning in traditional ‘didactic’ (3 weeks) and non-traditional (3 weeks). In each week, two of the selected four sessions were traditional and two non-traditional. This provided a control group for each week. - 2 The non-traditional tutorials involved activities designed to promote student-centered deep learning. Specific pedagogies employed were: self-generated analogies, constructivist, peer-to-peer learning, inquiry based learning, ownership of learning and active learning. - 3 After a three-week period, teaching styles of the selected groups was switched, to allow each group to experience both approaches with the same tutor. This also acted to mimimise any influence of tutor personality / style on the data. - 4 At the conclusion of the trial participants completed a ‘5 minute essay’ on how they liked the sessions, a small questionnaire, modelled on the modified (Christo & Hoang, 2013)SPQ designed by Biggs (1987) and a small formative quiz to gauge the level of learning achieved. DISCUSSION Preliminary results indicate that overall students respond positively to in class demonstrations (inquiry based learning), and active learning activities. Within the active learning exercises, the current data suggests students preferred individual rather than group or peer-to-peer activities. Preliminary results from the open-ended questions such as “What did you like most/least about this tutorial” and “do you have other comments on how this tutorial could better facilitate your learning”, however, indicated polarising views on the nontraditional tutorial. Some student’s responded that they really like the format and emphasis on understanding the concepts, while others were very vocal that that ‘hated’ the style and just wanted the solutions to be presented by the tutor. RECOMMENDATIONS/IMPLICATIONS/CONCLUSION Preliminary results indicated a mixed, but overall positive response by students with more collaborative tutorials employing tasks promoting inquiry based, peer-to-peer, active, and ownership of learning activities. Preliminary results from student feedback supports evidence that students learn differently, and running tutorials focusing on only one pedagogical approached (typically didactic) may not be beneficial to all students. Further, preliminary data suggests that the learning / teaching style of both students and tutor are important to promoting deep learning in students. Data collection is still ongoing and scheduled for completion at the end of First Semester (Australian academic calendar). The final paper will examine in more detail the results and analysis of this project.

Why the Constraints-Led Approach is not teaching games for understanding: A clarification

Background There is some apparent confusion regarding similarities and differences between two popular physical education (PE) pedagogical frameworks, that is, the Constraints-Led Approach (CLA) and Teaching Games for Understanding (TGfU). Purpose Our aim in this commentary is to detail important theoretical and pedagogical concepts that distinguish these approaches, as well as to recognise where commonalities exist. Findings In particular, we note that TGfU had its roots in the 1960s in the absence of a substantial theoretical framework, although several attempts to retrospectively scaffold theories around TGfU have subsequently emerged in the literature. TGfU is a learner-centred approach to PE in which teachers are encouraged to design modified games to develop the learner's understanding of tactical concepts. In contrast, the CLA has arisen more recently from the umbrella of Nonlinear Pedagogy (NLP), emerging from the empirically rich theoretical framework of ecological dynamics. The CLA adopts a ‘learner–environment’ scale of analysis in which practitioners are encouraged to identify and modify interacting constraints (of task, environment and learner) to facilitate the coupling of each learner's perceptual and action systems during learning. The CLA is a broader framework which has been adapted for the design of (re)learning environments in PE, sport and movement therapy. Other key distinctions between the approaches include: the overall goals; the way in which the learner and the learning process are modelled; the use of questioning as a pedagogical tool; the focus on individual differences vs. generic concepts; and how progressions and skill interjections are planned and implemented. Conclusions Despite such distinctions, the two approaches are somewhat harmonious and key similarities include: their holistic perspective of the learner; the proposed role of the teacher and the design characteristics of learning tasks in each. Both TGfU and the CLA have a powerful central focus on the nature of learning activities undertaken by each individual learner. This clarification of TGFU and the CLA is intended to act as a catalyst for more empirical work into the complementarity of these juxtaposed pedagogical approaches to learning design.

Constructing Technology Projects with Young Children : Four Detailed Case Studies of Mounting Constructivist Learning Projects Using Dimple Technologies for Young Children

The work by graduate teachers in this volume represent intentional design of learning experiences using technology for Early Childhood settings. They were given a two-part design task: a sequence of lessons organised around a themed project; and the collection of resources to support such activities. The project had to be constructive in nature where the children built objects and representations that were meaningful to them. The excellent works presented here offer a range of approaches that would be suitable in a variety of contexts. Because they are reasoned, these projects offer flexibility in implementation along with confidence that they would be effective.