Improving the efficiency of high power piezoelectric transducers for industrial applications

Most high-power ultrasound applications are driven by two-level inverters. However, the broad spectral content of the two-level pulse results in undesired harmonics that can decrease the performance of the system significantly. On the other hand, it is crucial to excite the piezoelectric devices at their main resonant frequency in order to have maximum energy conversion. Therefore a high-quality, low-distorted power signal is needed to excite the high-power piezoelectric transducer at its resonant frequency. This study proposes an efficient approach to develop the performance of high-power ultrasonic applications using multilevel inverters along with a frequency estimation algorithm. In this method, the resonant frequencies are estimated based on relative minimums of the piezoelectric impedance frequency response. The algorithm follows the resonant frequency variation and adapts the multilevel inverter reference frequency to drive an ultrasound transducer at high power. Extensive simulation and experimental results indicate the effectiveness of the proposed approach.

A comparative analysis of the integration of SOA elements in widely-used enterprise architecture frameworks

In recent years, enterprise architecture (EA) has captured increasing interest as a means to systematically consolidate and manage various enterprise artefacts in order to provide holistic decision support for business/IT alignment and business/IT landscapes management. To provide a holistic perspective on the enterprise over time, EA frameworks need to co-evolve with the changes in the enterprise and its IT over time. In this paper we focus on the emergence of Service-Oriented Architecture (SOA). There is a need to integrate SOA with EA to keep EA relevant and to use EA products to help drive successful SOA. This paper investigates and compares the integration of SOA elements in five widely used EA frameworks: Archimate, The Open Group Architecture Framework (TOGAF), Federal Enterprise Architecture Framework (FEAF), Department of Defence Architecture Framework (DoDAF) and the Ministry of Defence Architecture Framework (MODAF). It identifies what SOA elements are considered and their relative position in the overall structure. The results show that services and related elements are far from being well-integrated constructs in current EA frameworks and that the different EA frameworks integrated SOA elements in substantially different ways. Our results can support the academic EA and SOA communities with a closer and more consistent integration of EA and SOA and support practitioners in identifying an EA framework that provides the SOA support that matches their requirements.

Critical success elements for the design and implementation of organisational e-learning

Organisations are engaging in e-learning as a mechanism for delivering flexible learning to meet the needs of individuals and organisations. In light of the increasing use and organisational investment in e-learning, the need for methods to evaluate the success of its design and implementation seems more important than ever. To date, developing a standard for the evaluation of e-learning appears to have eluded both academics and practitioners. The currently accepted evaluation methods for e-learning are traditional learning and development models, such as Kirkpatrick’s model (1976). Due to the technical nature of e-learning it is important to broaden the scope and consider other evaluation models or techniques, such as the DeLone and McLean Information Success Model, that may be applicable to the e-learning domain. Research into the use of e-learning courses has largely avoided considering the applicability of information systems research. Given this observation, it is reasonable to conclude that e-learning implementation decisions and practice could be overlooking useful or additional viewpoints. This research investigated how existing evaluation models apply in the context of organisational e-learning, and resulted in an Organisational E-learning success Framework, which identifies the critical elements for success in an e-learning environment. In particular this thesis highlights the critical importance of three e-learning system creation elements; system quality, information quality, and support quality. These elements were explored in depth and the nature of each element is described in detail. In addition, two further elements were identified as factors integral to the success of an e-learning system; learner preferences and change management. Overall, this research has demonstrated the need for a holistic approach to e-learning evaluation. Furthermore, it has shown that the application of both traditional training evaluation approaches and the D&M IS Success Model are appropriate to the organisational e-learning context, and when combined can provide this holistic approach. Practically, this thesis has reported the need for organisations to consider evaluation at all stages of e-learning from design through to implementation.

The study of design elements and people’s behaviour in campus public space : how design shapes user’s behaviour

A growing body of researches provided evidence of the successful design in particular focus on design elements, ranging from colour, lighting, technology, landscape and spatial arrangement. However, no example or literature investigates the opportunities for linking these design elements in a practical base. Drawing upon existing architectural design theory, this paper investigates the relationship between design elements regards to public’s behavioural response to the public space. The aims of this paper are two-fold: first to examine whether there is a direct relationship between the two, and second to find out how the design elements could be coordinated together to influence not only the activities but also the environment, function and experience. To meet this objective, observation, behavioural mapping, interview and cognitive mapping methodologies are used. The present study involves two local case studies to find out the relationship between design elements in order to assist the design of a better public space for public activities. Correlation between the design elements shows that public activities is more likely to happen in relatively space with well balance of design. These finding provide a better understanding of public space design by gaining deeper perceptive between design and user’s behaviour, consequently improving social activities and interactions in public space. Moreover, it focuses on campus public areas which can be a vital aspect of university campus and play a valuable role in the overall success of public space design.

Improving ultrasound excitation systems using a flexible power supply with adjustable voltage and frequency to drive piezoelectric transducers

The ability of a piezoelectric transducer in energy conversion is rapidly expanding in several applications. Some of the industrial applications for which a high power ultrasound transducer can be used are surface cleaning, water treatment, plastic welding and food sterilization. Also, a high power ultrasound transducer plays a great role in biomedical applications such as diagnostic and therapeutic applications. An ultrasound transducer is usually applied to convert electrical energy to mechanical energy and vice versa. In some high power ultrasound system, ultrasound transducers are applied as a transmitter, as a receiver or both. As a transmitter, it converts electrical energy to mechanical energy while a receiver converts mechanical energy to electrical energy as a sensor for control system. Once a piezoelectric transducer is excited by electrical signal, piezoelectric material starts to vibrate and generates ultrasound waves. A portion of the ultrasound waves which passes through the medium will be sensed by the receiver and converted to electrical energy. To drive an ultrasound transducer, an excitation signal should be properly designed otherwise undesired signal (low quality) can deteriorate the performance of the transducer (energy conversion) and increase power consumption in the system. For instance, some portion of generated power may be delivered in unwanted frequency which is not acceptable for some applications especially for biomedical applications. To achieve better performance of the transducer, along with the quality of the excitation signal, the characteristics of the high power ultrasound transducer should be taken into consideration as well. In this regard, several simulation and experimental tests are carried out in this research to model high power ultrasound transducers and systems. During these experiments, high power ultrasound transducers are excited by several excitation signals with different amplitudes and frequencies, using a network analyser, a signal generator, a high power amplifier and a multilevel converter. Also, to analyse the behaviour of the ultrasound system, the voltage ratio of the system is measured in different tests. The voltage across transmitter is measured as an input voltage then divided by the output voltage which is measured across receiver. The results of the transducer characteristics and the ultrasound system behaviour are discussed in chapter 4 and 5 of this thesis. Each piezoelectric transducer has several resonance frequencies in which its impedance has lower magnitude as compared to non-resonance frequencies. Among these resonance frequencies, just at one of those frequencies, the magnitude of the impedance is minimum. This resonance frequency is known as the main resonance frequency of the transducer. To attain higher efficiency and deliver more power to the ultrasound system, the transducer is usually excited at the main resonance frequency. Therefore, it is important to find out this frequency and other resonance frequencies. Hereof, a frequency detection method is proposed in this research which is discussed in chapter 2. An extended electrical model of the ultrasound transducer with multiple resonance frequencies consists of several RLC legs in parallel with a capacitor. Each RLC leg represents one of the resonance frequencies of the ultrasound transducer. At resonance frequency the inductor reactance and capacitor reactance cancel out each other and the resistor of this leg represents power conversion of the system at that frequency. This concept is shown in simulation and test results presented in chapter 4. To excite a high power ultrasound transducer, a high power signal is required. Multilevel converters are usually applied to generate a high power signal but the drawback of this signal is low quality in comparison with a sinusoidal signal. In some applications like ultrasound, it is extensively important to generate a high quality signal. Several control and modulation techniques are introduced in different papers to control the output voltage of the multilevel converters. One of those techniques is harmonic elimination technique. In this technique, switching angles are chosen in such way to reduce harmonic contents in the output side. It is undeniable that increasing the number of the switching angles results in more harmonic reduction. But to have more switching angles, more output voltage levels are required which increase the number of components and cost of the converter. To improve the quality of the output voltage signal with no more components, a new harmonic elimination technique is proposed in this research. Based on this new technique, more variables (DC voltage levels and switching angles) are chosen to eliminate more low order harmonics compared to conventional harmonic elimination techniques. In conventional harmonic elimination method, DC voltage levels are same and only switching angles are calculated to eliminate harmonics. Therefore, the number of eliminated harmonic is limited by the number of switching cycles. In the proposed modulation technique, the switching angles and the DC voltage levels are calculated off-line to eliminate more harmonics. Therefore, the DC voltage levels are not equal and should be regulated. To achieve this aim, a DC/DC converter is applied to adjust the DC link voltages with several capacitors. The effect of the new harmonic elimination technique on the output quality of several single phase multilevel converters is explained in chapter 3 and 6 of this thesis. According to the electrical model of high power ultrasound transducer, this device can be modelled as parallel combinations of RLC legs with a main capacitor. The impedance diagram of the transducer in frequency domain shows it has capacitive characteristics in almost all frequencies. Therefore, using a voltage source converter to drive a high power ultrasound transducer can create significant leakage current through the transducer. It happens due to significant voltage stress (dv/dt) across the transducer. To remedy this problem, LC filters are applied in some applications. For some applications such as ultrasound, using a LC filter can deteriorate the performance of the transducer by changing its characteristics and displacing the resonance frequency of the transducer. For such a case a current source converter could be a suitable choice to overcome this problem. In this regard, a current source converter is implemented and applied to excite the high power ultrasound transducer. To control the output current and voltage, a hysteresis control and unipolar modulation are used respectively. The results of this test are explained in chapter 7.

Power converters design and analysis for high power piezoelectric ultrasonic transducers

High power piezoelectric ultrasonic transducers have been widely exploited in a variety of applications. The critical behaviour of a piezoelectric device is encapsulated in its resonant frequencies because of its maximum transmission performance at these frequencies. Therefore power electronic converters should be tuned at those resonant frequencies to transfer electrical power to mechanical power efficiently. However, structural and environmental changes cause variations in the device resonant frequencies which can degrade the system performance. Hence, estimating the device resonant frequencies within the incorporated setup can significantly improve the system performance. This paper proposes an efficient resonant frequency estimation approach to maintain the performance of high power ultrasonic applications using the employed power converter. Experimental validations indicate the effectiveness of the proposed method.

Integrating Intangible Cultural Heritage elements and learning strategy : a case study

Tanzania has a rich and diverse cultural history based on community cultural life. However, at present, young people have limited opportunity to exploit this richness of creative expressions and engage in creative jobs as their future career. Hence, the significant challenge remains: how to integrate Intangible cultural heritage elements and learning strategy as a means of promoting creative jobs for youth. This paper presents a case study on 'Strategies for youth employment in Tanzania: A creative industries approach'. The case study employed mixed methods incorporating questionnaires, interviews and focus groups and was held in Dar-Es-Salaam, Mwanza, Dodoma, Lindi and Morogoro from July to October, 2012. This paper discusses some of the issues and argues that there is no virtual utilization of the intangible cultural heritage knowledge and skills in 'putting education to work' (UNESCO, 2012) for the better prospects of youth. Although the discussion is specific to Tanzania, the case may also apply to other developing countries.

Local buckling behaviour of steel plate elements supported by a plastic foam material

Sandwich panels comprising steel facings and a polystyrene foam core are increasingly used as roof and wall claddings in buildings in Australia. When they are subjected to loads causing bending and/or axial compression, the steel plate elements of their profiled facing are susceptible to local buckling. However, when compared to panels with no foam core, they demonstrate significantly improved local buckling behaviour because they are supported by foam. In order to quantify such improvements and to validate the use of available design buckling stress formulae, an investigation using finite element analyses and laboratory experiments was carried out on steel plates that are commonly used in Australia of varying yield stress and thickness supported by a polystyrene foam core. This paper presents the details of this investigation, the buckling results and their comparison with available design buckling formulae.

Superior piezoelectric composite films : taking advantage of carbon nanomaterials

Piezoelectric composites comprising an active phase of ferroelectric ceramic and a polymer matrix have recently attracted numerous sensory applications. However, it remains a major challenge to further improve their electromechanical response for advanced applications such as precision control and monitoring systems. We hereby investigated the incorporation of graphene platelets (GnPs) and multi-walled carbon nanotubes (MWNTs), each with various weight fractions, into PZT (lead zirconate titanate)/epoxy composites to produce three-phase nanocomposites. The nanocomposite films show markedly improved piezoelectric coefficients and electromechanical responses (50%) besides an enhancement of ~200% in stiffness. Carbon nanomaterials strengthened the impact of electric field on the PZT particles by appropriately raising the electrical conductivity of epoxy. GnPs have been proved far more promising in improving the poling behavior and dynamic response than MWNTs. The superior dynamic sensitivity of GnP-reinforced composite may be caused by GnPs’ high load transfer efficiency arising from their two-dimensional geometry and good compatibility with the matrix. Reduced acoustic impedance mismatch resulted from the improved thermal conductance may also contribute to the higher sensitivity of GnP-reinforced composite. This research pointed out the potential of employing GnPs to develop highly sensitive piezoelectric composites for sensing applications.

The problem of greenwash: Rhetorical elements in communicating environmental CSR practices

The field of rhetoric can be highly useful for researchers to focus on and understand the specific textual strategies used by organizations when communicating about CSR practices. To date however, while there have been studies that consider the use of rhetoric to communicate about environmental practices, there have been few studies that have used a rhetorical analysis to consider both green communication and public response to that communication as a way of understanding public issues with organizational practice. This study seeks to address this gap by using a rhetorical analysis of both environmental communication by organizations, and the claims made by a regulatory body acting on behalf of the public about why that communication was deemed ‘greenwash’ or inappropriate. In doing so, the paper applies a rhetorical analysis to understand the grounds on which environmental communication is deemed not legitimate, and suggests that whilst all three elements of ethos should be considered when communicating a CSR practice, the element of phronesis is the most crucial element, whereby organizations must ensure that they accurately justify any claims in relation to CSR.

Not all dimensions of work self-efficacy are equal : understanding the role of tertiary work placements in the development of the elements of work self-efficacy

This paper examines the relationship between a final year tertiary work placement for criminology students at Griffith University in Brisbane and the development of their work self-efficacy. Using a work self-efficacy instrument developed by Professor Joe Raelin at Northeastern University in Boston, a pilot phase in 2006 and a larger study in 2007 investigated the students’ responses across seven self-efficacy factors of learning, problem-solving, teamwork, sensitivity, politics, pressure, and role expectations. Both studies utilised a pre- and post-test and comparisons between these indicated that they believed their abilities to participate constructively in their professional work contexts significantly improved as a result of their placement experience except in the areas of learning, teamwork and sensitivity. This finding will allow us to continue to refine the processes of work placements in order to ensure the integrity of this method for student learning.

A review of the removal of anions and oxyanions of the halogen elements from aqueous solution by layered double hydroxides

The application of layered double hydroxides (LDHs) and thermally activated LDHs for the removal of various fluorine (F-, BF-4), chlorine (Cl-,ClO-4), bromine (Br-, BrO-3) and iodine (I-, IO-3) species from aqueous solutions has been reviewed in this article. LDHs and thermally activated LDHs were able to significantly reduce the concentration of selected anions in laboratory scale experiments. The M2+:M3+ cation ratio of the LDH adsorbent was an important factor which influenced anion uptake. Though LDHs were able to remove some target anion species through anion exchange and surface adsorption thermal activation and reformation generally produced better results. The presence of competing anions including carbonate, phosphate and sulphate had a significant impact on uptake of the target anion as LDHs typically exhibit lower affinity towards monovalent anions compared to anions with multiple charges. The removal of fluoride and perchlorate from aqueous solution by a continuous flow system utilising fixed bed columns packed with LDH adsorbents has also been investigated. The adsorption capacity of the columns at breakpoint was heavily dependent on the flow rate and lower than result reported for the corresponding batch methods. There is still considerable scope for future research on numerous topics summarised in this article.

Found in translation : debating the abstract elements of cultures through actor training styles

While the synthesis of acting methodologies in intercultural acting has been discussed at length, little discussion has focussed on the potential of diverse actor training styles to affect performance making and audience reception. This article explores a project where the abstract elements of the British and American cultures were translated in rehearsal and in production through the purposeful juxtaposition of two differing actor training styles: the British ‘traditional’ approach and the American Method. William Nicholson’s Shadowlands was produced by Crossbow Productions at the Brisbane Powerhouse in 2010. Nicholson’s play contains a discourse on the cultural cringe of British – American relations. As a research project, the production aimed to extend and augment audience experience of the socio-cultural tensions inherent in the play by juxtaposing two seemingly culturally inscribed approaches to acting. Actors were chosen who had been trained under a traditional conservatoire approach and the American Method. A brief overview of these acting approaches is followed by a discussion centred on the project. This article analyses how from the casting room to the rehearsal room to the mise en scene and into the audience discussions, cultural issues were articulated, translated and debated through the language of acting.

Elements of Better Assessment for the Improvement of Learning

Building a community of shared practice at the classroom level calls for clarity about the important assessment capabilities and dispositions of teachers, especially when teachers are expected to take a direct focus on learning. In this chapter, we present new ways of thinking about teachers’ assessment literacies, offering a formulation of better assessment for the improvement of learning, including three elements, namely (i) assessment criteria and standards; (ii) the teacher’s professional judgment; and (iii) social moderation. The potential of the first element lies in teachers’ classroom practices that deliberately embed assessment criteria and standards in pedagogy in productive ways. The second element involves the engagement of teachers and students in judgment practice, that develops the understanding that judgment involves more than the application of explicit or stated criteria. More fundamental is the matter of how teachers bring to bear stated features of quality and other intellectual and experiential resources in arriving at judgment. That is to say, they range across and orient to explicit (stated), tacit (unstated) and meta-criteria in judgment making. These insights have direct relevance to teachers’ efforts to develop students’ own evaluative experience, especially as this involves students working with stated features of quality for self-assessment and peer-assessment purposes. Further, practices for social moderation are discussed, giving examples of good practice in moderation, how teachers experience moderation and the potential benefits of various types.