Approaches to learning information literacy : a phenomenographic study

This paper reports on an empirical study that explores the ways students approach learning to find and use information. Based on interviews with 15 education students in an Australian university, this study uses phenomenography as its methodological and theoretical basis. The study reveals that students use three main strategies for learning information literacy: 1) learning by doing; 2) learning by trial and error; and 3) learning by interacting with other people. Understanding the different ways that students approach learning information literacy will assist librarians and faculty to design and provide more effective information literacy education.

Digital Storytelling within a Service-Learning Partnership: Technology as Product and Process for University Students and Culturally and Linguistically Diverse High School Youth

This chapter describes a university/high school partnership focused on digital storytelling. It also explains the multi-stage process used to establish this successful partnership and project. The authors discuss the central role that technology played in developing this university/high school partnership, a collaboration that extended the impact of a digital storytelling project to reach high school students, university students, educators, high school administrators, and the local community. Valuing a reflective process that can lead to the creation of a powerful final product, the authors describe the impact of digital storytelling on multiple stakeholders, including the 13 university students and 33 culturally and linguistically diverse high school youth who participated during the fall of 2009. In addition, the chapter includes reflections from university and high school student participants expressed during focus groups conducted throughout the project. While most participants had a positive experience with the project, complications with the technology component often caused frustrations and additional challenges. Goals for sharing this project are to critically evaluate digital storytelling, describe lessons learned, and recommend good practices for others working within a similar context or with parallel goals.

The impact of a model of nurse education to improve knowledge and recognition of delirium in older persons by registered nurses

Introduction: Delirium is a serious issue associated with high morbidity and mortality in older hospitalised people. Early recognition enables diagnosis and treatment of underlying cause/s, which can lead to improved patient outcomes. However, research shows knowledge and accurate nurse recognition of delirium and is poor and lack of education appears to be a key issue related to this problem. Thus, the purpose of this randomised controlled trial (RCT) was to evaluate, in a sample of registered nurses, the usability and effectiveness of a web-based learning site, designed using constructivist learning principles, to improve acute care nurse knowledge and recognition of delirium. Prior to undertaking the RCT preliminary phases involving; validation of vignettes, video-taping five of the validated vignettes, website development and pilot testing were completed. Methods: The cluster RCT involved consenting registered nurse participants (N = 175) from twelve clinical areas within three acute health care facilities in Queensland, Australia. Data were collected through a variety of measures and instruments. Primary outcomes were improved ability of nurses to recognise delirium using written validated vignettes and improved knowledge of delirium using a delirium knowledge questionnaire. The secondary outcomes were aimed at determining nurse satisfaction and usability of the website. Primary outcome measures were taken at baseline (T1), directly after the intervention (T2) and two months later (T3). The secondary outcomes were measured at T2 by participants in the intervention group. Following baseline data collection remaining participants were assigned to either the intervention (n=75) or control (n=72) group. Participants in the intervention group were given access to the learning intervention while the control group continued to work in their clinical area and at that time, did not receive access to the learning intervention. Data from the primary outcome measures were examined in mixed model analyses. Results: Overall, the effect of the online learning intervention over time comparing the intervention group and the control group were positive. The intervention groups‘ scores were higher and the change over time results were statistically significant [T3 and T1 (t=3.78 p=<0.001) and T2 and T1 baseline (t=5.83 p=<0.001)]. Statistically significant improvements were also seen for delirium recognition when comparing T2 and T1 results (t=2.58 p=0.012) between the control and intervention group but not for changes in delirium recognition scores between the two groups from T3 and T1 (t=1.80 p=0.074). The majority of the participants rated the website highly on the visual, functional and content elements. Additionally, nearly 80% of the participants liked the overall website features and there were self-reported improvements in delirium knowledge and recognition by the registered nurses in the intervention group. Discussion: Findings from this study support the concept that online learning is an effective and satisfying method of information delivery. Embedded within a constructivist learning environment the site produced a high level of satisfaction and usability for the registered nurse end-users. Additionally, the results showed that the website significantly improved delirium knowledge & recognition scores and the improvement in delirium knowledge was retained at a two month follow-up. Given the strong effect of the intervention the online delirium intervention should be utilised as a way of providing information to registered nurses. It is envisaged that this knowledge would lead to improved recognition of delirium as well as improvement in patient outcomes however; translation of this knowledge attainment into clinical practice was outside the scope of this study. A critical next step is demonstrating the effect of the intervention in changing clinical behaviour, and improving patient health outcomes.

Changing the culture of teaching and learning in ICT and engineering : facilitating research professors to be teaching and learning leaders

This is the project report of a leadership project undertaken jointly by the Queensland University of Technology, University of Technology Sydney, and Monash University. Specific project objectives were to: -To build leadership capacity in teaching and learning, and to improve teaching quality in ICT and Engineering disciplines at three leading Australian universities, and -To facilitate the transference of research leadership to T&L leadership, and disseminate this transference model developed through the project within the Engineering and ICT domains to other disciplines and universities.

An intervention to improve motivation for homework

A repeated measures design, with randomly assigned intervention and control groups and multiple sources of information on each participant, was used to examine whether changing the method of delivery of a school’s homework program in order to better meet the students’ needs for autonomy, relatedness and competence would lead to more positive student attitudes to homework and whether there would also be a positive change in overall motivation. The participants were 104 male students aged 10 to 12 years who attended a single sex high school. There was no overall intervention effect on motivation; however, the intervention appeared to have a protective effect on the quality of motivation.

Learning and teaching reflection : developing capacities for lifelong learning

Reflection is an essential part of being an effective learner and working as a productive teacher. It enables the learner or teacher to deliberate about the factors that lead to successful learning and teaching for them and/or their students, in a particular place and for a specific purpose, so they can make reasoned and effective choices. This chapter introduces important frameworks that cover a century of thinking around reflection in education, and illustrates how preservice teachers can use these ideas across three phases. First, becoming a reflective learner as a university student to enhance learning and assessment outcomes; second, becoming a reflective teacher to improve classroom teaching and learning outcomes; and third, developing the reflective capacities of primary students so they can enhance their skills for lifelong learning.

Teaching journalism students how to tell Indigenous stories in an informed way : a work integrated learning approach

Australian journalism schools are full of students who have never met an Aboriginal or Torres Strait Island person and who do not know their history. Journalism educators are ill-equipped to redress this imbalance as a large majority are themselves non-Indigenous and many have had little or no experience with the coverage of Indigenous issues or knowledge of Indigenous affairs. Such a situation calls for educational approaches that can overcome these disadvantages and empower journalism graduates to move beyond the stereotypes that characterize the representation of Indigenous people in the mainstream media. This article will explore three different courses in three Australian tertiary journalism education institutions, which use Work-Integrated Learning Approaches to instil the cultural competencies necessary to encourage a more informed reporting of Indigenous issues. The findings from the three projects illustrate the importance of adopting a collaborative approach by industry, the Indigenous community and educators to encourage students’ commitment to quality journalism practices when covering Indigenous issues.

Developmental lessons from the Capricornia Arts Mob : ‘learning to speak with one voice’

The Capricornia Arts Mob also known as CAM is a collective of Aboriginal and Torres Strait Islander visual artists, sculptors, photographers, carvers and writers based in the Rockhampton Region. Its members are eclectic and include an 18 year old through to Elders. CAM has already had a major exhibition in Rockhampton and is submitting work to a range of arts festivals, events and exhibitions. While their achievements are steadily growing and they have been meeting for 18 months, they have been reluctant to incorporate or implement a formalised structure. In learning how to work together there have been tensions and struggles, there has also been the exhilaration of working collaboratively as artists from diverse Indigenous cultures who utilise different mediums. This has resulted in an incredible vibrancy in creative praxis. Members will share some of CAM’s learnings of the developmental process to date and thoughts and dreams about the future.

Liminal moments : designing, thinking and learning

This paper provides a contextual reflection for understanding best practice teaching to first year design students. The outcome (job) focused approach to higher education has lead to some unanticipated collateral damage for students, and in the case we discuss, has altered the students’ expectations of course delivery with specific implications and challenges for design educators. This tendency in educational delivery systems is further compounded by the distinct characteristics of Generation Y students within a classroom context. It is our belief that foundational design education must focus more on process than outcomes, and through this research with first year design students we analyse and raise questions relative to the curriculum for a Design and Creative Thinking course—in which students not only benefit from learning the theories and processes of design thinking, conceptualisation and creativity, but also are encouraged to see it as an essential tool for their education and development as designers. This study considers the challenges within a design environment; specifically, we address the need for process based learning in contrast to the outcome-focused approach taken by most students. The authors base their reflections on teaching design students at a university in Queensland, Australia.

Middle schooling and scientific literacy : bringing the students to science

This study is about young adolescents' engagement in learning science. The middle years of schooling are critical in the development of students' interest and engagement with learning. Successful school experiences enhance dispositions towards a career related to those experiences. Poor experiences lead to negative attitudes and rejection of certain career pathways. At a time when students are becoming more aware, more independent and focused on peer relationships and social status, the high school environment in some circumstances offers more a content-centred curriculum that is less personally relevant to their lives than the social melee surrounding them. Science education can further exacerbate the situation by presenting abstract concepts that have limited contextual relevance and a seemingly difficult vocabulary that further alienates adolescents from the curriculum. In an attempt to reverse a perceived growing disinterest by students to science (Goodrum, Druhan & Abbs, 2011), a study was initiated based on a student-centred unit designed to enhance and sustain adolescent engagement in science. The premise of the study was that adolescent students are more responsive toward learning if they are given an appropriate learning environment that helps connect their learning with life beyond the school. The purpose of this study was to examine the experiences of young adolescents with the aim of transforming school learning in science into meaningful experiences that connected with their lives. Two areas were specifically canvassed and subsumed within the study to strengthen the design base. One area that of the middle schooling ideology, offered specific pedagogical approaches and a philosophical framework that could provide opportunities for reform. The other area, the construct of scientific literacy (OECD, 2007) as defined by Holbrook and Rannikmae, (2009) appeared to provide a sense of purpose for students to aim toward and value for becoming active citizens. The study reported here is a self-reflection of a teacher/researcher exploring practice and challenging existing approaches to the teaching of science in the middle years of schooling. The case study approach (Yin, 2003) was adopted to guide the design of the study. Over a 6-month period, the researcher, an experienced secondary-science teacher, designed, implemented and documented a range of student-centred pedagogical practices with a Year-7 secondary science class. Data for this case study included video recordings, journals, interviews and surveys of students. Both quantitative and qualitative data sources were employed in a partially mixed methods research approach (Leech & Onwuegbuzie, 2009) dominated by qualitative data with the concurrent collection of quantitative data to corroborate interpretations as a means of analysing and developing a model of the dynamic learning environment. The findings from the case study identified five propositions that became the basis for a model of a student-centred learning environment that was able to sustain student participation and thus engagement in science. The study suggested that adolescent student engagement can be promoted and sustained by providing a classroom climate that encourages and strengthens social interaction. Engagement in science can be enhanced by presenting developmentally appropriate challenges that require rigorous exploration of contextually relevant learning environments; supporting students to develop connections with a curriculum that aligns with their own experiences. By setting an environment empathetic to adolescent needs and understandings, students were able to actively explore phenomena collaboratively through developmentally appropriate experiences. A significant outcome of this study was the transformative experiences of an insider, the teacher as researcher, whose reflections provide an authentic model for reforming pedagogy. The model and theory presented became an adjunct to my repertoire for science teaching in the middle years of schooling. The study was rewarding in that it helped address a void in my understanding of middle years of schooling by prompting me to re-think the notion of adolescence in the context of the science classroom. This study is timely given the report "The Status and Quality of Year 11 and 12 Science in Australian Schools" (Goodrum, Druhan & Abbs, 2011) and national curricular changes that are being proposed for science (ACARA, 2009).

Process model comprehension : the effects of cognitive abilities, learning style, and strategy

Process models are used to convey semantics about business operations that are to be supported by an information system. A wide variety of professionals is targeted to use such models, including people who have little modeling or domain expertise. We identify important user characteristics that influence the comprehension of process models. Through a free simulation experiment, we provide evidence that selected cognitive abilities, learning style, and learning strategy influence the development of process model comprehension. These insights draw attention to the importance of research that views process model comprehension as an emergent learning process rather than as an attribute of the models as objects. Based on our findings, we identify a set of organizational intervention strategies that can lead to more successful process modeling workshops.

Opening digital learning to deeper inquiry

This chapter presents an historical narrative on the recent evolution of information and communications technology (ICT) that has been, and is, utilized for purposes of learning. In other words, it presents an account of the development of e-learning supported through the Web and other similar virtual environments. It does not attempt to present a definitive account; as such an exercise is fraught with assumptions, contextual bias, and probable conjecture. The concern here is more with contextualizing the role of inquiry in learning and the evolving digital tools that enable interfaces that promote and support it. In tracking this evolution, both multi-disciplinary and trans-disciplinary research has been pursued. Key historical developments are identified as well as interpretations of the key drivers of e-learning over time and into what might be better described as digital learning. Innovations in the development of digital tools are described as dynamic and emergent, evolving as a consequence of multiple, sometimes hidden drivers of change. But conflating advancements in learning technologies with e-learning seems to be pervasive. As is the push for the “open” agenda – a growing number of initiatives and movements dominated by themes associated with access, intellectual property, public benefit, sharing and technical interoperability. Openness is also explored in this chapter, however, more in terms of what it means when associated with inquiry. By investigating opportunities for the stimulation and support of questioning online – in particular, why-questioning – this chapter is focused on “opening” content – not just for access but for inquiry and deeper learning.

Using visualization tool to help engineering students learning dynamics

Dynamics is an essential core engineering subject. It includes high level mathematical and theoretical contents, and basic concepts which are abstract in nature. Hence, Dynamics is considered as one of the hardest subjects in the engineering discipline. To assist our students in learning this subject, we have conducted a Teaching & Learning project to study ways and methods to effectively teach Dynamics based on visualization techniques. The research project adopts the five basic steps of Action Learning Cycle. It is found that visualization technique is a powerful tool for students learning Dynamics and helps to break the barrier of students who perceived Dynamics as a hard subject.

Enhancing student learning in the workplace through developing the leadership capabilities of clinical supervisors in the nursing discipline

The purpose of this project was to build the leadership capacity of clinical supervisors in the nursing discipline by developing, implementing and systematically embedding a leadership model into the structure and practice of student supervision. The University worked in partnership with three major metropolitan hospitals in Queensland to develop a framework and professional development program incorporating leadership and clinical supervision. The Leadership and Clinical Education (LaCE) program consisted of two structured workshops complemented by individual personal development projects undertaken by participants. Participants were supported in these activities with a purpose-built website that provides access to a wide variety of information and other learning resources. Quantitative and qualitative evaluations indicated that the approach was highly valued by participants, as it promoted useful peer dialogue, sharing of experiences and personal development in relation to assisting leadership development and student learning in the workplace. The LaCE program provides an ideal springboard for introducing the development of welltrained leaders into the clinical workplace. The resources developed have the potential to provide ongoing support for clinical supervisors to improve the learning of undergraduate nursing student. The challenge will be to achieve continued innovation within clinical education through sustainable leadership programs.

Liminal moments : designing, thinking and learning

This paper provides a contextual reflection for understanding best practice teaching to first year design students. The outcome (job) focussed approach to higher education has lead to some unanticipated collateral damage for students, and in the case we discuss, has altered the students’ expectations of course delivery with specific implications and challenges for design educators. This tendency in educational delivery systems is further compounded by the distinct characteristics of Generation Y students within a classroom context. It is our belief that foundational design education must focus more on process than outcomes, and through this research with first year design students we analyse and raise questions relative to the curriculum for a Design and Creative Thinking course—in which students not only benefit from learning the theories and processes of design thinking, conceptualisation and creativity, but also are encouraged to see it as an essential tool for their education and development as designers. This study considers the challenges within a design environment; specifically, we address the need for process based learning in contrast to the outcome-focused approach taken by most students. With this approach, students simultaneously learn to be a designer and rethink their approach to “doing design”.