Old mastheads and new media : newspapers striving to adapt in Australia and South-east Asia

As a key element in their response to new media forcing transformations in mass media and media use, newspapers have deployed various strategies to not only establish online and mobile products, and develop healthy business plans, but to set out to be dominant portals. Their response to change was the subject of an early investigation by one of the present authors (Keshvani 2000). That was part of a set of short studies inquiring into what impact new software applications and digital convergence might have on journalism practice (Tickle and Keshvani 2000), and also looking for demonstrations of the way that innovations, technologies and protocols then under development might produce a “wireless, streamlined electronic news production process (Tickle and Keshvani 2001).” The newspaper study compared the online products of The Age in Melbourne and the Straits Times in Singapore. It provided an audit of the Singapore and Australia Information and Communications Technology (ICT) climate concentrating on the state of development of carrier networks, as a determining factor in the potential strength of the two services with their respective markets. In the outcome, contrary to initial expectations, the early cable roll-out and extensive ‘wiring’ of the city in Singapore had not produced a level of uptake of Internet services as strong as that achieved in Melbourne by more ad hoc and varied strategies. By interpretation, while news websites and online content were at an early stage of development everywhere, and much the same as one another, no determining structural imbalance existed to separate these leading media participants in Australia and South-east Asia. The present research revisits that situation, by again studying the online editions of the two large newspapers in the original study, and one other, The Courier Mail, (recognising the diversification of types of product in this field, by including it as a representative of Newscorp, now a major participant). The inquiry works through the principle of comparison. It is an exercise in qualitative, empirical research that establishes a comparison between the situation in 2000 as described in the earlier work, and the situation in 2014, after a decade of intense development in digital technology affecting the media industries. It is in that sense a follow-up study on the earlier work, although this time giving emphasis to content and style of the actual products as experienced by their users. It compares the online and print editions of each of these three newspapers; then the three mastheads as print and online entities, among themselves; and finally it compares one against the other two, as representing a South-east Asian model and Australian models. This exercise is accompanied by a review of literature on the developments in ICT affecting media production and media organisations, to establish the changed context. The new study of the online editions is conducted as a systematic appraisal of the first level, or principal screens, of the three publications, over the course of six days (10-15.2.14 inclusive). For this, categories for analysis were made, through conducting a preliminary examination of the products over three days in the week before. That process identified significant elements of media production, such as: variegated sourcing of materials; randomness in the presentation of items; differential production values among media platforms considered, whether text, video or stills images; the occasional repurposing and repackaging of top news stories of the day and the presence of standard news values – once again drawn out of the trial ‘bundle’ of journalistic items. Reduced in this way the online artefacts become comparable with the companion print editions from the same days. The categories devised and then used in the appraisal of the online products have been adapted to print, to give the closest match of sets of variables. This device, to study the two sets of publications on like standards -- essentially production values and news values—has enabled the comparisons to be made. This comparing of the online and print editions of each of the three publications was set up as up the first step in the investigation. In recognition of the nature of the artefacts, as ones that carry very diverse information by subject and level of depth, and involve heavy creative investment in the formulation and presentation of the information; the assessment also includes an open section for interpreting and commenting on main points of comparison. This takes the form of a field for text, for the insertion of notes, in the table employed for summarising the features of each product, for each day. When the sets of comparisons as outlined above are noted, the process then becomes interpretative, guided by the notion of change. In the context of changing media technology and publication processes, what substantive alterations have taken place, in the overall effort of news organisations in the print and online fields since 2001; and in their print and online products separately? Have they diverged or continued along similar lines? The remaining task is to begin to make inferences from that. Will the examination of findings enforce the proposition that a review of the earlier study, and a forensic review of new models, does provide evidence of the character and content of change --especially change in journalistic products and practice? Will it permit an authoritative description on of the essentials of such change in products and practice? Will it permit generalisation, and provide a reliable base for discussion of the implications of change, and future prospects? Preliminary observations suggest a more dynamic and diversified product has been developed in Singapore, well themed, obviously sustained by public commitment and habituation to diversified online and mobile media services. The Australian products suggest a concentrated corporate and journalistic effort and deployment of resources, with a strong market focus, but less settled and ordered, and showing signs of limitations imposed by the delay in establishing a uniform, large broadband network. The scope of the study is limited. It is intended to test, and take advantage of the original study as evidentiary material from the early days of newspaper companies’ experimentation with online formats. Both are small studies. The key opportunity for discovery lies in the ‘time capsule’ factor; the availability of well-gathered and processed information on major newspaper company production, at the threshold of a transformational decade of change in their industry. The comparison stands to identify key changes. It should also be useful as a reference for further inquiries of the same kind that might be made, and for monitoring of the situation in regard to newspaper portals on line, into the future.

Two QUT Research Projects : Lightsite Perminant and Koonga Maya

Bushfire Responsive Architecture proposals (2) detailed in a 144 page document containing orginal architectural designs and site surveys by Dr Ian Weir. Presented in support of Dr Weir's sucessful planning application for the perminant artwork/land art project "Lightsite Perminant" situated on Point Henry, Western Australia.

Cross-correlations between weather variables in Australia

The information on climate variations is essential for the research of many subjects, such as the performance of buildings and agricultural production. However, recorded meteorological data are often incomplete. There may be a limited number of locations recorded, while the number of recorded climatic variables and the time intervals can also be inadequate. Therefore, the hourly data of key weather parameters as required by many building simulation programmes are typically not readily available. To overcome this gap in measured information, several empirical methods and weather data generators have been developed. They generally employ statistical analysis techniques to model the variations of individual climatic variables, while the possible interactions between different weather parameters are largely ignored. Based on a statistical analysis of 10 years historical hourly climatic data over all capital cities in Australia, this paper reports on the finding of strong correlations between several specific weather variables. It is found that there are strong linear correlations between the hourly variations of global solar irradiation (GSI) and dry bulb temperature (DBT), and between the hourly variations of DBT and relative humidity (RH). With an increase in GSI, DBT would generally increase, while the RH tends to decrease. However, no such a clear correlation can be found between the DBT and atmospheric pressure (P), and between the DBT and wind speed. These findings will be useful for the research and practice in building performance simulation.

Sustainability and the Building Code of Australia

This was a two-stage project to inform the Australian property and construction industry generally, and to provide the Australian Building Codes Board (ABCB) with information to allow it to determine whether or not sustainability requirements are necessary in the Future Building Code of Australia (BCA21). Research objectives included: examine overseas sustainability requirements for buildings and outline the reason why it is controlled and regulated in the particular country, state, principality etc. examine studies focusing on sustainability developments in buildings in Australia and overseas identify potential issues and implications associated with sustainable building requirements provide advice on whether provisions are necessary in the BCA21 to make buildings sustainable if the study determines there is a need for sustainability requirements in the BCA21, the study was to demonstrate the need to control and regulate along with the method to control and regulate. This research was broken down into two stages. Stage 1 was a literature review of international requirements as well as current thinking and practice for sustainable building developments. Stage 2 identified issues and implications of sustainability requirements for buildings and advice on whether provisions are necessary in the BCA21. This stage included workshops in all capital cities and involved key stakeholders, such as regulators, local government and representatives from key associations. This final report brings together the work of both stages, along with a searchable internet database of references and a series of nine key recommendations.

Framing Culture : Criticism and Policy in Australia

How is contemporary culture 'framed' - understood, promoted, dissected and defended - in the new approaches being employed in university education today? How do these approaches compare with those seen in the public policy process? What are the implications of these differences for future directions in theory, education, activism and policy? Framing Culture looks at cultural and media studies, which are rapidly growing fields through which students are introduced to contemporary cultural industries such as television, film and video. It compares these approaches with those used to frame public policy and finds a striking lack of correspondence between them. Issues such as Australian content on commercial television and in advertising, new technologies and new media, and violence in the media all highlight the gap between contemporary cultural theories and the way culture and communications are debated in public policy. The reasons for this gap must be investigated before closer relations can be established. Framing Culture brings together cultural studies and policy studies in a lively and innovative way. It suggests avenues for cultural activism that have been neglected in cultural theory and practice, and it will provoke debates which are long overdue.

Sandstone and rust : designing the qualities of Sydney harbour

Landscape architecture is built from place. What place is depends how one reads a site, which then determines what qualities are engaged with, and how they are engaged with, by design. Sydney Harbour is one of the most celebrated and distinctive harbours in the world. The qualities of the indigenous, pre-European landscape have been referred to regularly in the history of Australian landscape architecture as a source of inspiration for a truly Australian language of landscape design. A range of different models of such an Australian language have been proposed and tested on landscape design sites on Sydney Harbour, models that are in a discourse both with the specific landscape and with local landscape architecture theory and practice, particularly in relation to ideas of ‘appropriateness’ in Australian landscape architecture. This essay examines arguments from the 1970s that proposed a ‘palette’ approach to appropriateness, along with a key project from that period, Long Nose Point Park, that demonstrates this approach. The essay will then discuss three recent projects on the Harbour and demonstrate that these projects transcend the ‘palette’ approach by engaging with specific relationships on their sites (a ‘relationships’ approach) that are tied to the cultural occupation of Sydney Harbour. Along the way, the reader will be introduced to the key figures and history of landscape architecture in Australia, and to the geography of Sydney Harbour with its various ecologies and milieus

Teachers and the emotional dimensions of class in resource-affected rural Australia

In recent years, a 'cultural turn' in the study of class has resulted in a rich body of work detailing the ways in which class advantage and disadvantage are emotionally inscribed and embodied in educational settings. To date, however, much of this literature has focused on the urban sphere. In order to address this gap in the literature, this paper focuses on the affective evaluations made by teachers employed in rural and remote Australian schools of students' families, bodies, expectations and practices. The central argument is that moral ascriptions of class by the teachers are powerfully shaped by dominant socio-cultural constructions of rurality that equate 'the rural' with agriculture.

Basin analysis and economic geology of the Northern Mount Isa Basin

The Mount Isa Basin is a new concept used to describe the area of Palaeo- to Mesoproterozoic rocks south of the Murphy Inlier and inappropriately described presently as the Mount Isa Inlier. The new basin concept presented in this thesis allows for the characterisation of basin-wide structural deformation, correlation of mineralisation with particular lithostratigraphic and seismic stratigraphic packages, and the recognition of areas with petroleum exploration potential. The northern depositional margin of the Mount Isa Basin is the metamorphic, intrusive and volcanic complex here referred to as the Murphy Inlier (not the "Murphy Tectonic Ridge"). The eastern, southern and western boundaries of the basin are obscured by younger basins (Carpentaria, Eromanga and Georgina Basins). The Murphy Inlier rocks comprise the seismic basement to the Mount Isa Basin sequence. Evidence for the continuity of the Mount Isa Basin with the McArthur Basin to the northwest and the Willyama Block (Basin) at Broken Hill to the south is presented. These areas combined with several other areas of similar age are believed to have comprised the Carpentarian Superbasin (new term). The application of seismic exploration within Authority to Prospect (ATP) 423P at the northern margin of the basin was critical to the recognition and definition of the Mount Isa Basin. The Mount Isa Basin is structurally analogous to the Palaeozoic Arkoma Basin of Illinois and Arkansas in southern USA but, as with all basins it contains unique characteristics, a function of its individual development history. The Mount Isa Basin evolved in a manner similar to many well described, Phanerozoic plate tectonic driven basins. A full Wilson Cycle is recognised and a plate tectonic model proposed. The northern Mount Isa Basin is defined as the Proterozoic basin area northwest of the Mount Gordon Fault. Deposition in the northern Mount Isa Basin began with a rift sequence of volcaniclastic sediments followed by a passive margin drift phase comprising mostly carbonate rocks. Following the rift and drift phases, major north-south compression produced east-west thrusting in the south of the basin inverting the older sequences. This compression produced an asymmetric epi- or intra-cratonic clastic dominated peripheral foreland basin provenanced in the south and thinning markedly to a stable platform area (the Murphy Inlier) in the north. The fmal major deformation comprised east-west compression producing north-south aligned faults that are particularly prominent at Mount Isa. Potential field studies of the northern Mount Isa Basin, principally using magnetic data (and to a lesser extent gravity data, satellite images and aerial photographs) exhibit remarkable correlation with the reflection seismic data. The potential field data contributed significantly to the unravelling of the northern Mount Isa Basin architecture and deformation. Structurally, the Mount Isa Basin consists of three distinct regions. From the north to the south they are the Bowthorn Block, the Riversleigh Fold Zone and the Cloncurry Orogen (new names). The Bowthom Block, which is located between the Elizabeth Creek Thrust Zone and the Murphy Inlier, consists of an asymmetric wedge of volcanic, carbonate and clastic rocks. It ranges from over 10 000 m stratigraphic thickness in the south to less than 2000 min the north. The Bowthorn Block is relatively undeformed: however, it contains a series of reverse faults trending east-west that are interpreted from seismic data to be down-to-the-north normal faults that have been reactivated as thrusts. The Riversleigh Fold Zone is a folded and faulted region south of the Bowthorn Block, comprising much of the area formerly referred to as the Lawn Hill Platform. The Cloncurry Orogen consists of the area and sequences equivalent to the former Mount Isa Orogen. The name Cloncurry Orogen clearly distinguishes this area from the wider concept of the Mount Isa Basin. The South Nicholson Group and its probable correlatives, the Pilpah Sandstone and Quamby Conglomerate, comprise a later phase of now largely eroded deposits within the Mount Isa Basin. The name South Nicholson Basin is now outmoded as this terminology only applied to the South Nicholson Group unlike the original broader definition in Brown et al. (1968). Cored slimhole stratigraphic and mineral wells drilled by Amoco, Esso, Elf Aquitaine and Carpentaria Exploration prior to 1986, penetrated much of the stratigraphy and intersected both minor oil and gas shows plus excellent potential source rocks. The raw data were reinterpreted and augmented with seismic stratigraphy and source rock data from resampled mineral and petroleum stratigraphic exploration wells for this study. Since 1986, Comalco Aluminium Limited, as operator of a joint venture with Monument Resources Australia Limited and Bridge Oil Limited, recorded approximately 1000 km of reflection seismic data within the basin and drilled one conventional stratigraphic petroleum well, Beamesbrook-1. This work was the first reflection seismic and first conventional petroleum test of the northern Mount Isa Basin. When incorporated into the newly developed foreland basin and maturity models, a grass roots petroleum exploration play was recognised and this led to the present thesis. The Mount Isa Basin was seen to contain excellent source rocks coupled with potential reservoirs and all of the other essential aspects of a conventional petroleum exploration play. This play, although high risk, was commensurate with the enormous and totally untested petroleum potential of the basin. The basin was assessed for hydrocarbons in 1992 with three conventional exploration wells, Desert Creek-1, Argyle Creek-1 and Egilabria-1. These wells also tested and confrrmed the proposed basin model. No commercially viable oil or gas was encountered although evidence of its former existence was found. In addition to the petroleum exploration, indeed as a consequence of it, the association of the extensive base metal and other mineralisation in the Mount Isa Basin with hydrocarbons could not be overlooked. A comprehensive analysis of the available data suggests a link between the migration and possible generation or destruction of hydrocarbons and metal bearing fluids. Consequently, base metal exploration based on hydrocarbon exploration concepts is probably. the most effective technique in such basins. The metal-hydrocarbon-sedimentary basin-plate tectonic association (analogous to Phanerozoic models) is a compelling outcome of this work on the Palaeo- to Mesoproterozoic Mount lsa Basin. Petroleum within the Bowthom Block was apparently destroyed by hot brines that produced many ore deposits elsewhere in the basin.

Assessment of the suitability of public mobile data networks for aircraft telemetry and control purposes

This paper provides a review of the state of the art relevant work on the use of public mobile data networks for aircraft telemetry and control proposes. Moreover, it describes the characterisation for airborne uses of the public mobile data communication systems known broadly as 3G. The motivation for this study was the explore how this mature public communication systems could be used for aviation purposes. An experimental system was fitted to a light aircraft to record communication latency, line speed, RF level, packet loss and cell tower identifier. Communications was established using internet protocols and connection was made to a local server. The aircraft was flown in both remote and populous areas at altitudes up to 8500 ft in a region located in South East Queensland, Australia. Results show that the average airborne RF levels are better than those on the ground by 21% and in the order of - 77dbm. Latencies were in the order of 500ms (1/2 the latency of Iridium), an average download speed of 0.48Mb/s, average uplink speed of 0.85Mb/s, a packet of information loss of 6.5%. The maximum communication range was also observed to be 70km from a single cell station. The paper also describes possible limitations and utility of using such communications architecture for both manned and unmanned aircraft systems.

Impacts and opportunities : resident's view on sustainable development of tourism in regional Queensland, Australia

Tourism development is a priority for rural and regional areas of Australia. The challenge is how to develop the tourism industry in a sustainable manner. As part of a larger project investigating community perceptions of opportunities, strategies and challenges in regional sustainable development, this article explores participant's views and opinions of tourism development. Through purposive sampling, 28 local community leaders and residents in the Darling Downs region in Queensland, Australia, participated in four semi-structured focus groups. This paper focuses on two of these focus groups, where tourism was a critical issue. Participants were generally positive about the tourism industry and its impacts on their community, although they expressed several triple bottom line concerns about economic, environmental and scoial issues. Four key themes emerged: appropriate land use management, limited resources and ageing/insufficient infrastructure, preservaation of community heritage and lifestyle, and regional conflict. Residents supported sustainable tourism development and wanted to be more actively involved in decision-making, demanding greater transparency - and true engagement - from local government.

Traffic and climate change impacts on water quality : measuring build-up and wash-off of heavy metals and petroleum hydrocarbons

Understanding the impacts of traffic and climate change on water quality helps decision makers to develop better policy and plans for dealing with unsustainable urban and transport development. This chapter presents detailed methodologies developed for sample collection and testing for heavy metals and total petroleum hydrocarbons, as part of a research study to investigate the impacts of climate change and changes to urban traffic characteristics on pollutant build-up and wash-off from urban road surfaces. Cadmium, chromium, nickel, copper, lead, iron, aluminium, manganese and zinc were the target heavy metals, and selected gasoline and diesel range organics were the target total petroleum hydrocarbons for this study. The study sites were selected to encompass the urban traffic characteristics of the Gold Coast region, Australia. An improved sample collection method referred to as ‘the wet and dry vacuum system’ for the pollutant build-up, and an effective wash-off plan to incorporate predicted changes to rainfall characteristics due to climate change, were implemented. The novel approach to sample collection for pollutant build-up helped to maintain the integrity of collection efficiency. The wash-off plan helped to incorporate the predicted impacts of climate change in the Gold Coast region. The robust experimental methods developed will help in field sample collection and chemical testing of different stormwater pollutants in build-up and wash-off.

The relationship between building characteristics and the chemical composition of surface films found on glass windows in Brisbane, Australia

Films found on the windows of residential buildings have been studied. The main aim of the paper was to assess the roles of the films in the accumulation of potentially toxic chemicals in residential buildings. Thus the elemental and polycyclic aromatic hydrocarbon compositions of the surface films from the glass windows of eighteen residential buildings were examined. The presence of sample amounts of inorganic elements (4.0–1.2 × 106 μg m−2) and polycyclic aromatic hydrocarbons in the films (BDL - 620.1 ng m−2) has implications for human exposure and the fate of pollutants in the urban environment. To facilitate the interpretation of the results, data matrices consisting of the chemical composition of the films and the building characteristics were subjected to multivariate data analysis methods, and these revealed that the accumulation of the chemicals was strongly dependent on building characteristics such as the type of glass used for the window, the distance from a major road, age of the building, distance from an industrial activity, number of smokers in the building and frequency of cooking in the buildings. Thus, building characteristics which minimize the accumulation of pollutants on the surface films need to be encouraged.