Developing the ASEAN regional road safety strategy

In 2011, more than 75,000 people died in road crashes in the ten member countries of the Association of South East Asian Nations (ASEAN) and many times this number sustained long term injuries. Improving road safety outcomes in ASEAN is not only important for the welfare and economic benefit of these countries, but given that a significant proportion of the world’s population lives in ASEAN, it will strongly influence whether the aims of the United Nations Decade of Action for Road Safety and the Sustainable Development Goals are reached. For this reason, the Asian Development Bank, funded by the Japan Fund for Poverty Reduction, has funded a package of action to improve road safety in ASEAN, including the development of a regional road safety strategy. The diversity of the member nations of ASEAN poses significant challenges for the development of the strategy. For example, the road fatality rates per 100,000 population in Malaysia and Thailand are about 5 times greater than in Singapore. In addition, the importance of particular road safety issues varies across the ASEAN countries and for countries which are undergoing rapid motorization, the order of importance may change over the life of the strategy. The development of the ASEAN Regional Road Safety Strategy has adopted the five pillars of road safety of the UN Decade of Action but focused on those aspects which are most relevant at the regional level and where a regional approach will support and facilitate actions taken by individual countries.

Organisational driving safety systems analysis: Fleet safety situational issues and system gaps

The identification of safety hazards and risks and their associated control measures provides the foundation for any safety program and essentially determines the scope, content and complexity of an effective occupational health and safety management system. In the case of work-related road safety (WRRS), there is a gap within current knowledge, research and practice regarding the holistic assessment of WRRS safety systems and practice. In order to mitigate this gap, a multi-level process tool for assessing WRRS safety systems was developed from extensive consultation, practice and informed by theoretical models and frameworks. Data collection for the Organisational Driving Safety Systems Analysis (ODSSA) tool utilised a case study methodology and included multiple information sources: such as documents, archival records, interviews, direct observations, participant observations, and physical artefacts. Previous trials and application of the ODSSA has indicated that the tool is applicable to a wide range of organisational fleet environments and settings. This paper reports on the research results and effectiveness of the ODSSA tool to assess WRRS systems across a large organisation that recently underwent considerable organisational change, including amalgamation of multiple organisations. The outcomes of this project identified considerable differences in the degree by which the organisation addressed WRRS across their vehicle fleet operations and provided guidelines for improving organisations’ WRRS systems. The ODSSA tool was pivotal in determining WRRS system deficiencies and provided a platform to inform mitigation and improvement strategies.

Observations of road safety behaviours and practices of motorcycle rickshaw drivers in Lahore, Pakistan

Motorcycle Rickshaws (MRs) are an informal paratransit mode in Pakistan. They are locally manufactured and very popular but there are concerns about their crash involvement and overall safety. The first study of the current PhD program revealed that rickshaws (both MRs and auto-rickshaws) were involved in 51,992 road crashes attended by emergency ambulances in Punjab province, Pakistan between 2011-2013. This study aims to examine the road safety behaviours and practices of Motorcycle Rickshaw Drivers (MRDs) that may be contributing to these crashes. MRDs were observed at 12 major signalised intersections in Lahore. Vehicle characteristics and driver behaviours were recorded using a paper-based survey between 9am-7pm for a full week in May 2015. Of the 500 MRDs observed, about 23.4% appeared to be younger than the minimum driver licensing age of 18 years. More than half (52.6%) of the MRDs entered on the red light and 17.4% crossed when the signal was turning from yellow to green or red. MR traffic conflicts were observed in 62.8% of cases and one crash and 15 near-miss crashes were witnessed. Additionally, about half of MRs were overloaded, no MRD wore a helmet, and 3.8% were using a mobile phone while driving. This study provides the first scientific evidence to substantiate public concerns regarding the safety of MRs. It demonstrates that about a quarter of MRDs are underage,almost half of MRs are overloaded and more than half disobey traffic signals. This research could inform authorities to manage MR related transport and road safety issues.

The National Road Safety Partnership Program providing a pathway for any business/organisation to create a positive road safety culture

The National Road Safety Partnership Program (NRSPP) is an industry-led collaborative network which aims to support Australian businesses in developing a positive road safety culture. It aims to help businesses to protect their employees and the public, not only during work hours, but also when their staff are ‘off-duty’. How do we engage and help an organisation minimise work-related vehicle crashes and their consequences both internally, and within the broader community? The first step is helping an organisation to understand the true cost of its road incidents. Larger organisations often wear the costs without knowing the true impact to their bottom line. All they perceive is the change in insurance or vehicle repairs. Understanding the true cost should help mobilise a business’s leadership to do more. The next step is ensuring the business undertakes an informed, structured, evidence-based pathway which will guide them around the costly pitfalls. A pathway based around the safe system approach with buy-in at the top which brings the workforce along. The final step, benchmarking, allows the organisation to measure and track its change. This symposium will explore the pathway steps for organisations using NRSPP resources to become engaged in road safety. The 'Total Cost of Risk' calculator has been developed by Zurich, tested in Europe by Nestle and modified by NRSPP for Australia. This provides the first crucial step. The next step is a structured approach through the Workplace Road Safety Guide using experts and industry to discuss the preferred safe system approach which can then link into the national Benchmarking Project. The outputs from the symposium can help frame a pathway for organisations to follow through the NRSPP website.

ASEAN and ADB implementing new approaches to building road safety capacity

Following the Association of Southeast Asian Nations (ASEAN) senior transport officials meeting in May 2011, the Secretariat requested the Asian Development Bank (ADB) to provide assistance to improve road safety in ASEAN. In response, ADB, funded by the Japan Fund for Poverty Reduction, has begun an innovative approach to capacity building that has already been adapted and replicated in other sub-regions. This paper will discuss the model central to the project. The Road Safety Capacity Building for ASEAN Project commenced in May 2013. Each country has appointed a National Focal Point (NFP) to identify and coordinate information. A team of International Experts were appointed to develop materials and present a comprehensive train the trainer program focused on five key areas. Thirty eight senior Government officers from across ASEAN attended a two week program at ADB headquarters in Manila and will arrange and deliver specific training and associated activities to other colleagues within their country. ADB has appointed a National Consultant to work in partnership with the trainees on a range of activities including development of “pipeline project proposals” for funding consideration investors and donors. As part of the project, a draft ASEAN Regional Road Safety Strategy document has been prepared and consultation will further refine its directions and contents. The project will reach its conclusion in 2015 and a follow up phase three project is being considered.

Roundabout design guidelines and cycling safety

Review conducted as part of a Queensland Department of Transport and Main Roads funded project ‘Roundabout design review’. The project examined: - Design guidelines - Factors that affect safety at roundabouts

Developing a new index for comparing road safety maturity: Case study of the ASEAN community

As part of the development of the ASEAN Regional Road Safety Strategy, a new index for measuring road safety maturity (RSM) was constructed from numerical weightings given to measurable factors presented for each of the pillars that guide national road safety plans and activities in WHO Global Road Safety Report 2013: road safety management, safer road and mobility, safer vehicles, safer road users and post-crash response. The index is based on both a content analysis approach and a binary methodology (report/no report) including measures which have been considered pertinent and not redundant. For instance, the use of random breath testing and/or police checkpoints in the national drink driving law are combined in the enforcement index. The value of the index per pillar ranges from 0 to 100%, taking into account whether there is total, partial or non-implementation of certain actions. In addition, when possible, the self-rated level of enforcement is included. The overall ratings for the I 0 ASEAN countries and the scores for each of the pillars are presented in the paper. The extent to which the RSM index is a valid indicator of road safety performance is also discussed.

Strengthening local road safety capacity in Cambodia

Road crashes and injuries have become a growing issue worldwide. In 2011, more than 75,000 people died in road crashes in the ten member countries of the Association of South East Asian Nations (ASEAN) and many times this number sustained long term injuries. In 2014, the Asian Development Bank (ADB), funded by the Japan Fund for Poverty Reduction, commenced a package of actions to improve road safety in ASEAN. In 2015, as part of the technical assistance for this project, a Road Safety Advisor was appointed for Cambodia for four months. The assignment produced several primary outputs, which included the organization of national training on traffic law enforcement and road safety management, the conduct of a training needs survey and cost analysis study, and the development of a proposal for strengthening speed management. It is important to note that unlike other ADB technical assistance projects, this assignment adopted a capacity building approach, which promoted and encouraged the local road safety team in the government to step up and take action. The research capacity building approach adopted in this project highlighted the feasibility of increasing participation from existing stakeholders, especially the government in identifying existing human resources, building the capacity of relevant government officials and supporting them to take the ownership of the project. It is hoped that similar outcomes will occur in the other ASEAN countries.

Improving health and safety communication of migrant construction workers

Although statistical data in some developed countries indicate that migrant workers are nearly 30% more likely to have work-related injuries than local workers, no equivalent official injury/ incident statistics on the health and safety (H&S) of migrant workers are currently tracked in Australia. With increasing numbers of migrant workers having joined Australia’s extractive industries infrastructure and commercial construction industry, this suggests the need for some investigation. A particular issue is that lack of H&S communication is one of the key factors leading to construction industry accidents/ incidents as it prevents workers from effectively receiving H&S safety training and acquiring H&S information. Migrant workers whose first languages are not English are particularly affected by this problem and ways are needed to improve their situation. The research aims to do this by evaluating the H&S communication problems of migrant workers and identify an effective H&S communication structure. An overview of the challenge being addressed by the research is firstly provided, followed by a description of the research framework, and a report of the initial findings, from which recommendations are provided for improving H&S performance in the construction industry.

Improving the outcomes of foot and ankle surgery. Professional impact of the Australasian College of Podiatric Surgeons' audit tool

Background Surgery is an example of expanded practice scope that enhances podiatry and incorporates inter-professional collaboration. By 2050 demand for foot and ankle procedures is predicted to rise nationally by 61.9%. Performance management of this increase motivated the development of an online audit tool. Developed in collaboration with the Australasian College of Podiatric Surgeons (ACPS), the ACPS audit tool provides real-time data capture and reporting. It is the first audit tool designed in Australia to support and improve the outcomes of foot and ankle surgery. Methods Audit activity in general, orthopaedic, plastic and podiatric surgery was examined using a case study design. Audit participation enablers and barriers were explored. Case study results guided a Delphi survey of international experts experienced or associated with foot and ankle surgery. Delphi survey-derived consensus informed modification of a generic data set from the Royal Australasian College of Surgeons (RACS). Based on the Delphi survey findings the ACPS online audit tool was developed and piloted. Reliability and validity of data entry and usability of this new tool was then assessed with an online survey. Results The case study found surgeon attitudes and behaviours positively impacted audit participation, and also indicated that audit data should be: (1) available in real time, (2) identify practice change, (3) applicable for safety and quality management, and; (4) useful for peer review discussion. The Delphi process established consensus on audit variables to be captured, including the modified RACS generic data set. 382 cases of foot and ankle surgery were captured across 3 months using the new tool. Data entry was found to be valid and reliable. Real-time outcome reporting and practice change identification impacted positively on safety and quality management and assisted peer review discussion. An online survey showed high levels of usability. Conclusions Surgeon contribution to audit tool development resulted in 100% audit participation. The data from the ACPS audit tool supported the ACPS submission to the Medical Services Advisory Committee to list podiatric surgery under Medicare, an outcome noted by the Federal Minister of Health.

Sponsoring a rival has benefits too: A longitudinal study of changes in fan attitudes toward favored-and opposing-team sponsor brands

A longitudinal field experiment examined sports fans’ attitudes toward favored- and opposing-team sponsors across time. Measurements at five timepoints showed fans’ attitudes were more positive toward their favored-team sponsors, but that attitudes improved across time toward both favored-team sponsors and opposing-team sponsors. This occurred regardless of intensity of fan identification.

Motorcycle riders' self-reported aggression when riding compared with car driving

Aggressive driving has been shown to be related to increased crash risk for car driving. However, less is known about aggressive behaviour and motorcycle riding and whether there are differences in on-road aggression as a function of vehicle type. If such differences exist, these could relate to differences in perceptions of relative vulnerability associated with characteristics of the type of vehicle such as level of protection and performance. Specifically, the relative lack of protection offered by motorcycles may cause riders to feel more vulnerable and therefore to be less aggressive when they are riding compared to when they are driving. This study examined differences in self-reported aggression as a function of two vehicle types: passenger cars and motorcycles. Respondents (n = 247) were all motorcyclists who also drove a car. Results were that scores for the composite driving aggression scale were significantly higher than on the composite riding aggression scale. Regression analyses identified different patterns of predictors for driving aggression from those for riding aggression. Safety attitudes followed by thrill seeking tendencies were the strongest predictors for driving aggression, with more positive safety attitudes being protective while greater thrill seeking was associated with greater self-reported aggressive driving behaviour. For riding aggression, thrill seeking was the strongest predictor (positive relationship), followed by self-rated skill, such that higher self rated skill was protective against riding aggression. Participants who scored at the 85th percentile or above for the aggressive driving and aggressive riding indices had significantly higher scores on thrill seeking, greater intentions to engage in future risk taking, and lower safety attitude scores than other participants. In addition participants with the highest aggressive driving scores also had higher levels of self-reported past traffic offences than other participants. Collectively, these findings suggest that people are less likely to act aggressively when riding a motorcycle than when driving a car, and that those who are the most aggressive drivers are different from those who are the most aggressive riders. However, aggressive riders and drivers appear to present a risk to themselves and others on road. Importantly, the underlying influences for aggressive riding or driving that were identified in this study may be amenable to education and training interventions.

Examination of a scale assessing attitudes towards individuals with intellectual disability in China

This study examined the applicability of the four-factor structure of the short form of the Community Living Attitudes Scale-Intellectual disability1 (CLAS-ID) in China, using a sample of 325 Chinese community members. Confirmatory factor analysis revealed that the original structure of the short form of the CLAS-ID did not adequately fit the data from the current sample. Most items of the Exclusion and Similarity subscales were retained while items on the Empowerment and Sheltering subscales were removed. Chinese community members held generally positive attitudes towards people with intellectual disability. However, a measurement tool originating from the Chinese context is needed to provide a better understanding of attitudes towards individuals with intellectual disability in mainland China.

Design and Development of an In-Vehicle Human Machine Interface to Improve Fuel Efficiency & Safety

Road transport plays a significant role in various industries and mobility services around the globe and has a vital impact on our daily lives. However it also has serious impacts on both public health and the environment. In-vehicle feedback systems are a relatively new approach to encouraging driver behaviour change for improving fuel efficiency and safety in automotive environments. While many studies claim that the adoption of eco-driving practices, such as eco-driving training programs and in-vehicle feedback to drivers, has the potential to improve fuel efficiency, limited research has integrated safety and eco-driving. Therefore, this research seeks to use human factors related theories and practices to inform the design and evaluation of an in-vehicle Human Machine Interface (HMI) providing real-time driver feedback with the aim of improving both fuel efficiency and safety.