Planning, development and management of sustainable cities: A commentary from the guest editors

Cities are the most dramatic manifestations of human activities on the surface of the earth. These human-dominated organisms—i.e., cities—degrade natural habitats, simplify species composition, disrupt hydrological systems, and modify energy flow and nutrient cycling. Today, these consequential impacts of human activities, originated from population increase, rapid urbanization, high private motor vehicle dependency, deregulated industrialization and mass livestock production, are increasing exponentially and causing great deal of environmental, social, and economic challenges both at global and local scales. In such a situation, establishment of sustainable cities, through sustainable urban development practices, is seen as a potential panacea to combat these challenges responsibly, effectively, and efficiently. This paper offers a critical review of the key literature on the issues relating to planning, development and management of sustainable cities, introduces the contributions from the Special Issue, and speculates on the prospective research directions to place necessary mechanisms to secure a sustainable urban future for all.

Exploring collaborative modeling of business processes on large interactive touch display walls - video

Analyzing and redesigning business processes is a complex task, which requires the collaboration of multiple actors. Current approaches focus on collaborative modeling workshops where process stakeholders verbally contribute their perspective on a process while modeling experts translate their contributions and integrate them into a model using traditional input devices. Limiting participants to verbal contributions not only affects the outcome of collaboration but also collaboration itself. We created CubeBPM – a system that allows groups of actors to interact with process models through a touch based interface on a large interactive touch display wall. We are currently in the process of conducting a study that aims at assessing the impact of CubeBPM on collaboration and modeling performance. Initial results presented in this paper indicate that the setting helped participants to become more active in collaboration.

Exploring collaborative modeling of business processes on large interactive touch display walls

Analyzing and redesigning business processes is a complex task, which requires the collaboration of multiple actors. Current approaches focus on collaborative modeling workshops where process stakeholders verbally contribute their perspective on a process while modeling experts translate their contributions and integrate them into a model using traditional input devices. Limiting participants to verbal contributions not only affects the outcome of collaboration but also collaboration itself. We created CubeBPM – a system that allows groups of actors to interact with process models through a touch based interface on a large interactive touch display wall. We are currently in the process of conducting a study that aims at assessing the impact of CubeBPM on collaboration and modeling performance. Initial results presented in this paper indicate that the setting helped participants to become more active in collaboration.

Towards collaborative modeling of business processes on large interactive touch display walls

Analyzing and redesigning business processes is a complex task, which requires the collaboration of multiple actors. Current approaches focus on workshops where process stakeholders together with modeling experts create a graphical visualization of a process in a model. Within these workshops, stakeholders are mostly limited to verbal contributions, which are integrated into a process model by a modeling expert using traditional input devices. This limitation negatively affects the collaboration outcome and also the perception of the collaboration itself. In order to overcome this problem we created CubeBPM – a system that allows groups of actors to interact with process models through a touch based interface on a large interactive touch display wall. Using this system for collaborative modeling, we expect to provide a more effective collaboration environment thus improving modeling performance and collaboration.

Population health planning and health promotion: Opportunities and challenges to improve social determinants

Complex social factors and health issues challenge equitable health outcomes for many people, in particular those living in marginalised communities. Primary health care promises solutions through population health and health promotion approaches to improve social conditions (determinants) affecting health with emphasis on change at systems levels. Yet short-term efficiency focus policy decisions without long-term planning can undermine the effectiveness of primary health care. The workshop goal is to explore opportunities and share ideas about population health planning in Primary Health Networks and other community health care settings, so as to draw out opportunities, challenges and forward thinking health planning and health promotion strategies.

Governance and regional planning outcomes: Using governance indicators to support a policy implementation approach

Regional planning faces numerous decision making uncertainties related to the complex interdependencies between urban and regional centres. Questions about how to achieve sustainable planning solutions across regions are a key uncertainty and relate to a lack of information about the actual achievement of outcomes as proposed by the objectives of a plan. Regional plan implementation and its impact on environmental, social and economic outcomes have been little explored within Australian urban and regional planning research. Despite a desire to improve the conditions across Australian regions, ambiguity persists regarding the results of regional planning efforts. Of the variables affecting regional planning, scholars argue that governance has a significant impact on achieving outcomes (see Pahl-Wostl 2009). In order to better analyse the impact of governance, we propose a set of governance indicators to examine decisions across regional planning institutions and apply this to governance models across Queensland’s regions. We contend that these governance indicators can support a more rigorous assessment of the impacts of governance models on plan implementation and outcomes. We propose that this is a way to better understand the relationship between planning and outcomes across urban and regional areas.

A critical evaluation of literature on robot path planning in dynamic environment

Robot Path Planning (RPP) in dynamic environments is a search problem based on the examination of collision-free paths in the presence of dynamic and static obstacles. Many techniques have been developed to solve this problem. Trapping in a local minima and maintaining a Real-Time performance are known as the two most important challenges that these techniques face to solve such problem. This study presents a comprehensive survey of the various techniques that have been proposed in this domain. As part of this survey, we include a classification of the approaches and identify their methods.

Connections not boundaries: Future learning and physical spaces

In the developed world, we feel the effects of "digital disruption" in our experiences of the spaces of retail, hospitality, entertainment, finance, arts and culture, and even healthcare. This disruption can take many forms: augmentation of physical experience with a digital complement such as the use of a bespoke mobile application to navigate an art museum, ordering food on digital tablets in a restaurant, recording our health data to share with a doctor. We also rate and review our experiences of a wide range of services and share these opinions with diverse others via the social web.

Analysis of governance for sustainability planning in the Cairns Region

The relationship between governance arrangements and sustainability planning outcomes in complex governance systems remains poorly understood, despite significant discussions of governance in the environmental management literature emerging in the last decade. In order to analyse and examine the relationship between the health of sustainability planning governance and decision-making outcomes, this paper applies the Governance Systems Analysis framework (GSA) in the Cairns region. This paper analyses the sustainability planning governance arrangements in the Cairns region by exploring the capacity, connectivity and knowledge use of institutions in the region to deliver desired sustainability planning outcomes. The paper finds that the planning for sustainability in the Cairns region is on a knife’s edge, and could fail or succeed to deliver its intended decision-making outcomes. The paper concludes with recommendations for governance reform for sustainability in the Cairns region.

A dosimetric retrospective planning study comparing volumetric arc therapy (VMAT) and stereotactic body radiotherapy (SBRT) treatment plans for non-small cell lung cancer (NSCLC)

Purpose A retrospective planning study comparing volumetric arc therapy (VMAT) and stereotactic body radiotherapy (SBRT) treatment plans for non-small cell lung cancer (NSCLC). Methods and materials Five randomly selected early stage lung cancer patients were included in the study. For each patient, four plans were created: the SBRT plan and three VMAT plans using different optimisation methodologies. A total of 20 different plans were evaluated. The dose parameters of dose conformity results and the target dose constraints results were compared for these plans. Results The mean planning target volume (PTV) for all the plans (SBRT and VMAT) was 18·3 cm3, with a range from 15·6 to 20·1 cm3. The maximum dose tolerance to 1 cc of all the plans was within 140% (84 Gy) of the prescribed dose, and 95% of the PTV of all the plans received 100% of the prescribed dose (60 Gy). In all the plans, 99% of the PTV received a dose >90% of the prescribed dose, and the mean dose in all the plans ranged from 67 to 72 Gy. The planning target dose conformity for the SBRT and the VMAT (0°, 15° collimator single arc plans and dual arc) plans showed the tightness of the prescription isodose conformity to the target. Conclusions SBRT and VMAT are radiotherapy approaches that increase doses to small tumour targets without increasing doses to the organs at risk. Although VMAT offers an alternative to SBRT for NSCLC and the potential advantage of VMAT is the reduced treatment times over SBRT, the statistical results show that there was no significant difference between the SBRT and VMAT optimised plans in terms of dose conformity and organ-at-risk sparing.

Supporting mindful planners in a mindless system: Limitations to the emotional turn in planning practice

Despite widespread acknowledgment within planning scholarship that emotion – both present in knowledge and a form of knowledge – is integral to lived experience and the judgement of planners, it is often sidelined within planning practice. The extent to which mainstream planning has been able or willing to accommodate emotions remains constrained and the emotions of planners and the public remain an unacknowledged but pervasive presence. Antonio Ferreira recently highlighted in this journal the importance of attending to emotions at the level of the individual planner through the concept of mindfulness. We argue this approach must be complemented by an acknowledgement of the structural and institutional limitations of including emotions in planning practice. Drawing from the emotional geographies literature to describe a social-spatial conceptualisation of emotion, we highlight ontological and practical tensions associated with the achievement of the ‘emotional turn’ and advance a more purposeful engagement with emotion in mainstream planning practice.

Planning the unplanned City: The story of the gold coast

One of the distinctive features of Gold Coast urbanisation is its historically ad hoc approach to development with little or no strategic planning to guide it. Many have commented on the lack of planning on the Gold Coast calling it ‘an experiment in freedom’ or ‘free enterprise city’. Following a major restructuring of the Queensland’s local councils, the 1990s witnessed a shift from ad hoc decision making to more systematic planning on the Gold Coast. Understanding the past is important for shaping the future. This paper reviews the history of regulatory planning on the Gold Coast, encompassing decisions affecting the form and development of its earliest settlements through to its periods of greatest construction and most streamlined decision–making. It focuses mainly on past planning processes, the problems identified in each planning exercise and the interventions introduced, asking whether these were implemented or not and why. The paper positions the Gold Coast as a physical embodiment of this history of decision making, assessing the effects on the city as a whole of specific measures either affording freedoms or insisting on accountability to various levels of regulation. It examines how the absence of some planning measures influenced the form of the city and its internal arrangements and considers how the shift from ad hoc decision making towards more systematic planning efforts affected the city’s urbanisation. The lessons that the Gold Coast example provides will resonate with places elsewhere in Australia and the world, if not always in scale definitely in substance.

Design thinking using a collaborative model for skin cancer prevention

Physical activity is well recognised as a means to reduce cancer risk; however, outdoor activity can increase sun exposure and consequential skin cancer risk. It is proposed, one of the key potential solutions to promote active lifestyles whilst enhancing protection against skin cancer is design resolution for active apparel that considers Australia’s sub-tropical climate whilst maintaining comfort, aesthetic appeal and performance. Using a design thinking approach, facilitated through collaboration between an NGO and a university, student designers were tasked with developing apparel prototypes to explore this challenge. Through practical ideation of problems, potential design solutions were developed within a modest NGO budget and adherence to specific brand guidelines. This project is novel as it demonstrates a low cost yet effective way of collaboratively creating a product to meet multiple needs, rather than reactively assessing already manufactured sun protection products for endorsement. It is a nimble and unique stepping stone in integrating sun safety considerations into clothing that is appealing to the population and creating cross-industry understandings of how design can better contribute to human health and wellbeing. Outcomes to be shared include empirical insights for updating sun safe clothing guidelines, issues around the aesthetic nature of sun safe apparel, and the role of design education for sun safety.

Collaborative writing to enhance cross-cultural understanding within the academy

This paper describes the design and implementation of a research writing workshop for postgraduate students. The workshop was developed to respond to two key issues currently on the agenda in Australia’s universities: a push to embed Indigenous perspectives into the curriculum, and a desire to develop creative works as quality research outputs. The workshop was carefully designed to provide opportunities for participants to practise and improve their writing; develop transferable writing skills; develop a culturally safe environment where Indigenous and non-Indigenous Australians could work together; provide a place to practise collaborative writing and collaborative facilitating; and provide an opportunity to develop a publication-ready, creative writing piece that was co-developed by participants. In this paper, the authors provide an overview of the literature relevant to Indigenizing a workshop curriculum and reflect on the genre of Indigenous writing in Australia. They also discuss the literature relevant to their collaboration as both writers and facilitators. They conclude that the workshop processes contributed to building a relationship of collaboration and trust between the facilitators and participants, and that these processes directly contributed to the successful workshop outcomes.

Collaborative learning approach to introduce computational fluid dynamics

This paper presents the design, implementation and evaluation of a collaborative learning activity designed to replace traditional face-to-face lectures in a large classroom. This activity aims to better engage the students with their learning and improve the students’ experience and outcomes. This project is implemented in the Fluid Mechanics unit of the Mechanical Engineering degree at the Queensland University of Technology to introduce students with the concept, terminology and process of Computational Fluid Dynamics (CFD). The approach integrates a constructive collaborative assignment which is a key element in the overall quality of teaching and learning, and an integral component of the students’ experience. A detailed survey, given to the students, showed an overall high level of satisfaction. However, the results also highlighted the gap between students’ expectations both for contents and assignment and teacher expectations. Discussions to address this issue are presented in the paper based on a critical reflection.