801 resultados para High definition television
Resumo:
Purpose This work introduces the concept of very small field size. Output factor (OPF) measurements at these field sizes require extremely careful experimental methodology including the measurement of dosimetric field size at the same time as each OPF measurement. Two quantifiable scientific definitions of the threshold of very small field size are presented. Methods A practical definition was established by quantifying the effect that a 1 mm error in field size or detector position had on OPFs, and setting acceptable uncertainties on OPF at 1%. Alternatively, for a theoretical definition of very small field size, the OPFs were separated into additional factors to investigate the specific effects of lateral electronic disequilibrium, photon scatter in the phantom and source occlusion. The dominant effect was established and formed the basis of a theoretical definition of very small fields. Each factor was obtained using Monte Carlo simulations of a Varian iX linear accelerator for various square field sizes of side length from 4 mm to 100 mm, using a nominal photon energy of 6 MV. Results According to the practical definition established in this project, field sizes < 15 mm were considered to be very small for 6 MV beams for maximal field size uncertainties of 1 mm. If the acceptable uncertainty in the OPF was increased from 1.0 % to 2.0 %, or field size uncertainties are 0.5 mm, field sizes < 12 mm were considered to be very small. Lateral electronic disequilibrium in the phantom was the dominant cause of change in OPF at very small field sizes. Thus the theoretical definition of very small field size coincided to the field size at which lateral electronic disequilibrium clearly caused a greater change in OPF than any other effects. This was found to occur at field sizes < 12 mm. Source occlusion also caused a large change in OPF for field sizes < 8 mm. Based on the results of this study, field sizes < 12 mm were considered to be theoretically very small for 6 MV beams. Conclusions Extremely careful experimental methodology including the measurement of dosimetric field size at the same time as output factor measurement for each field size setting and also very precise detector alignment is required at field sizes at least < 12 mm and more conservatively < 15 mm for 6 MV beams. These recommendations should be applied in addition to all the usual considerations for small field dosimetry, including careful detector selection.
Resumo:
Overconsumption of snack foods has been linked to rising rates of obesity, with our ‘obesogenic’ environment and its abundance of palatable, high-calorie foods and associated cues especially implicated. However, it is clear that some individuals are particularly susceptible to overconsumption and weight gain. It was hypothesised that individuals sensitive to the rewarding properties of palatable foods, and associated stimuli, would show elevated consumption. Snack food intake was measured in 50 adults (mean age 34.5 years, BMI 23.9 kg/m2, 56% female) in a repeated measures design, both with and without a ‘food cue’. Trait (BIS/BAS scales), behavioural (computerised CARROT) and food reward were assessed. Sensitivity to food reward, but not generalised reward, was positively associated with snack food intake. This relationship was not affected by the presence of a food cue. Findings are discussed in the context of implications for weight management.
Resumo:
'Choosing Science' reports on the most thorough study yet undertaken in Australia to investigate Year 10 students' decisions about whether to take science subjects. The study was well supported by ASTA members, with around 590 teachers and 3800 students participating. It examined teachers' views on the persistent declines in science enrolments, and students' perceptions of school science and aspirations towards further study and careers. The report discusses students' attitudes to science, their enrolment deliberations, sources of advice and recommendations for change. The report identifies the most likely and unlikely contributors to enrolment declines, and makes 10 recommendations.
Resumo:
Within the cardiac high dependency unit it is currently a member of the surgical team who makes the decision for a patient's chest drain to be removed after cardiac surgery. This has often resulted in delays in discharging one patient and therefore in admitting the next. A pilot study was carried out using a working standard that had been developed, incorporating an algorithmic model. The results have enabled nursing staff in a cardiac high dependency unit to undertake this responsibility independently.
Resumo:
Reliability of carrier phase ambiguity resolution (AR) of an integer least-squares (ILS) problem depends on ambiguity success rate (ASR), which in practice can be well approximated by the success probability of integer bootstrapping solutions. With the current GPS constellation, sufficiently high ASR of geometry-based model can only be achievable at certain percentage of time. As a result, high reliability of AR cannot be assured by the single constellation. In the event of dual constellations system (DCS), for example, GPS and Beidou, which provide more satellites in view, users can expect significant performance benefits such as AR reliability and high precision positioning solutions. Simply using all the satellites in view for AR and positioning is a straightforward solution, but does not necessarily lead to high reliability as it is hoped. The paper presents an alternative approach that selects a subset of the visible satellites to achieve a higher reliability performance of the AR solutions in a multi-GNSS environment, instead of using all the satellites. Traditionally, satellite selection algorithms are mostly based on the position dilution of precision (PDOP) in order to meet accuracy requirements. In this contribution, some reliability criteria are introduced for GNSS satellite selection, and a novel satellite selection algorithm for reliable ambiguity resolution (SARA) is developed. The SARA algorithm allows receivers to select a subset of satellites for achieving high ASR such as above 0.99. Numerical results from a simulated dual constellation cases show that with the SARA procedure, the percentages of ASR values in excess of 0.99 and the percentages of ratio-test values passing the threshold 3 are both higher than those directly using all satellites in view, particularly in the case of dual-constellation, the percentages of ASRs (>0.99) and ratio-test values (>3) could be as high as 98.0 and 98.5 % respectively, compared to 18.1 and 25.0 % without satellite selection process. It is also worth noting that the implementation of SARA is simple and the computation time is low, which can be applied in most real-time data processing applications.
Resumo:
We present a pole inspection system for outdoor environments comprising a high-speed camera on a vertical take-off and landing (VTOL) aerial platform. The pole inspection task requires a vehicle to fly close to a structure while maintaining a fixed stand-off distance from it. Typical GPS errors make GPS-based navigation unsuitable for this task however. When flying outdoors a vehicle is also affected by aerodynamics disturbances such as wind gusts, so the onboard controller must be robust to these disturbances in order to maintain the stand-off distance. Two problems must therefor be addressed: fast and accurate state estimation without GPS, and the design of a robust controller. We resolve these problems by a) performing visual + inertial relative state estimation and b) using a robust line tracker and a nested controller design. Our state estimation exploits high-speed camera images (100Hz) and 70Hz IMU data fused in an Extended Kalman Filter (EKF). We demonstrate results from outdoor experiments for pole-relative hovering, and pole circumnavigation where the operator provides only yaw commands. Lastly, we show results for image-based 3D reconstruction and texture mapping of a pole to demonstrate the usefulness for inspection tasks.
Resumo:
This project was an initial stage in formulating and management of the optimum budget allocation during the operational, maintenance and rehabilitation phases in high rise residential property development in Malaysia. The principal objective of this project is to develop a framework of Whole Life Cycle Costing for high rise residential property development that will enhance the quality and cost effectiveness of this building type in Malaysia. The researcher investigated 13 building components from 6 high rise residential property developments in Johor, Malaysia to determine the affect and economic impact of component initial cost and quality by applying them to a Whole Life Cycle Cost model approach. The results provide valuable data in respect to the overall cost of specific components over the whole life of a large high rise building. In addition, Dr. Mat Noor also determined the impact and satisfaction of quality of building components through WLCC.
Resumo:
Organisational culture is considered an important influence on performance, particularly for service firms that rely on values-driven social controls to enhance human interactions (O’Reilly & Chatman, 1996). Using a qualitative approach, we show how the modified Organisational Culture Profile developed by Sarros, Gray, Densten, and Cooper (2005) to assess Australian organisations provides a framework for exploring the cultural drivers of high performing knowledge-intensive service firms in New Zealand. Our study provides rich insights into how six key cultural dimensions–competitiveness, innovation, performance orientation, emphasis on rewards, supportiveness and social responsibility–are translated into strategic human resource management practices.
Resumo:
Installation of domestic rooftop photovoltaic cells (PVs) is increasing due to feed–in tariff and motivation driven by environmental concerns. Even though the increase in the PV installation is gradual, their locations and ratings are often random. Therefore, such single–phase bi–directional power flow caused by the residential customers can have adverse effect on the voltage imbalance of a three–phase distribution network. In this chapter, a voltage imbalance sensitivity analysis and stochastic evaluation are carried out based on the ratings and locations of single–phase grid–connected rooftop PVs in a residential low voltage distribution network. The stochastic evaluation, based on Monte Carlo method, predicts a failure index of non–standard voltage imbalance in the network in presence of PVs. Later, the application of series and parallel custom power devices are investigated to improve voltage imbalance problem in these feeders. In this regard, first, the effectiveness of these two custom power devices is demonstrated vis–à–vis the voltage imbalance reduction in feeders containing rooftop PVs. Their effectiveness is investigated from the installation location and rating points of view. Later, a Monte Carlo based stochastic analysis is utilized to investigate their efficacy for different uncertainties of load and PV rating and location in the network. This is followed by demonstrating the dynamic feasibility and stability issues of applying these devices in the network.
Resumo:
Background Prevention of childhood obesity is a public health priority for Malaysia and many other countries. Physical activity for children is also decreasing at an alarming rate. Both conditions are associated with non-communicable diseases and with significant morbidity and mortality in later life. Systematic reviews of public health interventions provide a useful summary to inform public health practice by combining the results of a range of research studies on a specific intervention into a single report. Systematic reviews are deemed most valuable for health program development and evidence based practice. Unfortunately, many policy makers and practitioners are simply unaware of the evidence: which strategies which are most likely to provide benefit; and which strategies are known to be harmful or useless. This presentation provides a “birds eye” overview based upon recent (since 2007 to present) high quality systematic reviews of public health interventions. Method HealthEvidece.org and the Cochrane Library were searched for systematic reviews which evaluated interventions targeting obesity prevention and increasing physical activity for children. The findings of the included reviews were themed and summarized. Results Seven reviews were identified addressing obesity in the early years, and fifteen reviews addressing obesity more broadly in childhood. Additional reviews were identified aimed at increasing physical activity. The synthesis shows several strategies to be effective, however many popular strategies clearly are not. Several of the reviews were inconclusive due to an absence of robust primary studies. Amongst the findings, interventions undertaken in the school setting appear very promising. Conclusions There is significant evidence from systematic reviews to guide public health practice and policy, and to inform future research.
Resumo:
This article examines two instances of media policy involving satellite transmission and Indigenous television: the introduction of the Viewer Access Satellite Television (VAST) platform in 2010 and the introduction of AUSSAT in the mid-1980s. The government’s failure to provide community and Indigenous broadcasters with an access regime at the time of AUSSAT resulted in Australia’s first and only Indigenous commercial television licensee, Imparja. Over a quarter of a century later, Imparja now forms part of the joint-venture company that runs VAST, a key component of Australia’s digital switchover planning. During the passage of the legislative amendments required to establish VAST, the issue of access resurfaced – this time in relation to Australia’s national and community Indigenous television channels. The article recounts the events leading up to the 2010 Bill, and examines the intended and unintended consequences of satellite policy in relation to Indigenous media, including equalisation and transparency of government funding programs.
Resumo:
The mechanisms involved in alcohol use disorders are complex. It has been shown that ghrelin is an important signal for the control of body weight homeostasis, preferably by interacting with hypothalamic circuits, as well as for drug reward by activating the mesolimbic dopamine system. The ghrelin receptor (GHS-R1A) has been shown to be required for alcohol-induced reward. Additionally, ghrelin increases and GHR-R1A antagonists reduce moderate alcohol consumption in mice, and a single nucleotide polymorphism in the GHS-R1A gene has been associated with high alcohol consumption in humans. However, the role of central ghrelin signaling in high alcohol consumption is not known. Therefore, the role of GHS-R1A in operant self-administration of alcohol in rats as well as for high alcohol consumption in Long-Evans rats and in alcohol preferring [Alko alcohol (AA)] rats was studied here. In the present study, the GHS-R1A antagonist, JMV2959, was found to reduce the operant self-administration of alcohol in rats and to decrease high alcohol intake in Long-Evans rats as well as in AA rats. These results suggest that the ghrelin receptor signaling system, specifically GHS-R1A, is required for operant self-administration of alcohol and for high alcohol intake in rats. Therefore, the GHS-R1A may be a therapeutic target for treatment of addictive behaviors, such as alcohol dependence.
Resumo:
Design Pressure Test 2013 was a full-day intensive design immersion creative event run on Saturday 3 August 2013, at the QUT Faculty of Creative Industries J Block Design Lab Workshop in Brisbane, Australia, for 25 self-selected high-achieving junior and middle school (year 5-9) students, as part of the Queensland Academies ‘Young Scholars’ Program. Facilitated by tertiary interior design, fashion design and industrial design educators, technicians and six tertiary interior design and fashion design students, the workshop explored design process, environmental impact, the material properties and structural integrity of cardboard, construction techniques, and the production and evaluation of furniture design prototypes. This action research study aimed to facilitate an awareness in young people, of the role and scope of design within our society, the environmental ramifications of design decisions, and the value of design thinking skills in generating strategies to solve basic to complex challenges. It also aimed to investigate the value of collaboration between junior and middle school students, tertiary design educators and students and industry professionals in design awareness, and inspiring post-secondary pathways and idea generation for education. During the creative event, students utilised mathematics skills and developed sketching, making, communication, presentation and collaboration skills to improve their design process, while considering social, cultural and environmental opportunities. Through a series of hands-on collaborative design experiments, participants explored in teams of five, the opportunities available using cardboard as a material – inspiring both functional and aesthetic design solutions. Underpinned by the State Library of Queensland Design Minds Website ‘inquire, ideate and implement’ model of design thinking, the experiments culminated in the development of a detailed client brief, the design and fabrication of a furniture item for seating, and then a team presentation of prototypes to a panel of judges from the professions of architecture, interior design and industrial design, viewed also by parents. The final test for structural integrity was measured by the hoisting down of an adult body weight onto the fabricated seat. The workshop was filmed for the television program ‘Totally Wild’ for dissemination nationally (over 200,000 viewing audience) of the value of design and the Design Minds model to a wider target youth audience.
Resumo:
Current military conflicts are characterized by the use of the improvised explosive device. Improvements in personal protection, medical care, and evacuation logistics have resulted in increasing numbers of casualties surviving with complex musculoskeletal injuries, often leading to lifelong disability. Thus, there exists an urgent requirement to investigate the mechanism of extremity injury caused by these devices in order to develop mitigation strategies. In addition, the wounds of war are no longer restricted to the battlefield; similar injuries can be witnessed in civilian centers following a terrorist attack. Key to understanding such mechanisms of injury is the ability to deconstruct the complexities of an explosive event into a controlled, laboratory-based environment. In this article, a traumatic injury simulator, designed to recreate in the laboratory the impulse that is transferred to the lower extremity from an anti-vehicle explosion, is presented and characterized experimentally and numerically. Tests with instrumented cadaveric limbs were then conducted to assess the simulator’s ability to interact with the human in two mounting conditions, simulating typical seated and standing vehicle passengers. This experimental device will now allow us to (a) gain comprehensive understanding of the load-transfer mechanisms through the lower limb, (b) characterize the dissipating capacity of mitigation technologies, and (c) assess the bio-fidelity of surrogates.
Resumo:
Since World War I, explosions have accounted for over 70% of all injuries in conflict. With the development of improved personnel protection of the torso, improved medical care and faster aeromedical evacuation, casualties are surviving with more severe injuries to the extremities. Understanding the processes involved in the transfer of blast-induced shock waves through biological tissues is essential for supporting efforts aimed at mitigating and treating blast injury. Given the inherent heterogeneities in the human body, we argue that studying these processes demands a highly integrated approach requiring expertise in shock physics, biomechanics and fundamental biological processes. This multidisciplinary systems approach enables one to develop the experimental framework for investigating the material properties of human tissues that are subjected to high compression waves in blast conditions and the fundamental cellular processes altered by this type of stimuli. Ultimately, we hope to use the information gained from these studies in translational research aimed at developing improved protection for those at risk and improved clinical outcomes for those who have been injured from a blast wave.