Brake system performance requirements of a lightweight electric/hybrid rear wheel drive vehicle

Investigates the braking performance requirements of the UltraCommuter, a lightweight series hybrid electric vehicle currently under development at the University of Queensland. With a predicted vehicle mass of 600 kg and two in-wheel motors each capable of 500 Nm of peak torque, decelerations up to 0.46 g are theoretically possible using purely regenerative braking. With 99% of braking demands less than 0.35 g, essentially all braking can be regenerative. The wheel motors have sufficient peak torque capability to lock the rear wheels in combination with front axle braking, eliminating the need for friction braking at the rear. Emergency braking levels approaching 1 g are achieved by supplementation with front disk brakes. This paper presents equations describing the peak front and rear axle braking forces which occur under straight line braking, including gradients. Conventionally, to guarantee stability, mechanical front/rear proportioning of braking effort ensures that the front axle locks first. In this application, all braking is initially regenerative at the rear, and an adaptive ''by-wire'' proportioning system presented ensures this stability requirement is still satisfied. Front wheel drive and all wheel drive systems are also discussed. Finally, peak and continuous performance measures, not commonly provided for friction brakes, are derived for the UltraCommuter's motor capability and range of operation.

A method of switch selection for an electric vehicle drive

The key to reducing cost of electric vehicles is integration. All too often systems such as the motor, motor controller, batteries and vehicle chassis/body are considered as separate problems. The truth is that a lot of trade-offs can be made between these systems, causing an overall improvement in many areas including total cost. Motor controller and battery cost have a relatively simple relationship; the less energy lost in the motor controller the less energy that has to be carried in the batteries, hence the lower the battery cost. A motor controller’s cost is primarily influenced by the cost of the switches. This paper will therefore present a method of assessing the optimal switch selection on the premise that the optimal switch is the one that produces the lowest system cost, where system cost is the cost of batteries + switches.

Sleepiness : how a biological drive can influence other risky road user behaviours

The Safe System approach to road safety utilises a holistic view of the interactions among vehicles, roads and road users. Yet, the contribution of each of these factors to crashes is vastly different. The role of road users is widely acknowledged as an overwhelming contributor to road crashes. Substantial gains have been made with improvements to vehicle and roads over a number of years. However, improvements of the road user’s behaviour has been (in some cases) less substantial. A road user behaviour that is relatively unregulated is driver sleepiness, which is part of the ‘fatal five’ of risky road user behaviours. The effect of sleepiness is ubiquitous – sleepiness is a state that most, if not all drivers on our roads has experienced, and is habitually exposed to. The quality and quantity of daily sleep is integral to our level of neurobehavioural performance during wakefulness and as such can have a compounding effect on a number of other risky driving behaviours. This paper will discuss the potential influence of sleepiness as an interceding factor for a number of risky driving behaviours. Little effort has been given to increasing awareness of the deleterious and wide ranging effects that sleepiness has on road safety. Given the wide ranging influence of sleepiness, improvements of ‘sleep health’ as a protective factor at the community or individual level could lead to significant reductions in road trauma and increases of general well being. A discussion of potential actions to reduce sleepiness is required if reductions of road trauma are to continue.

Exploiting the facile oxidation of evaporated gold films to drive electroless silver deposition for the creation of bimetallic Au/Ag surfaces

Gold is often considered as an inert material but it has been unequivocally demonstrated that it possesses unique electronic, optical, catalytic and electrocatalytic properties when in a nanostructured form.[1] For the latter the electrochemical behaviour of gold in aqueous media has been widely studied on a plethora of gold samples, including bulk polycrystalline and single-crystal electrodes, nanoparticles, evaporated films as well as electrodeposited nanostructures, particles and thin films.[1b, 2] It is now well-established that the electrochemical behaviour of gold is not as simple as an extended double-layer charging region followed by a monolayer oxide-formation/-removal process. In fact the so-called double-layer region of gold is significantly more complicated and has been investigated with a variety of electrochemical and surface science techniques. Burke and others[3] have demonstrated that significant processes due to the oxidation of low lattice stabilised atoms or clusters of atoms occur in this region at thermally and electrochemically treated electrodes which were confirmed later by Bond[4] to be Faradaic in nature via large-amplitude Fourier transformed ac voltammetric experiments. Supporting evidence for the oxidation of gold in the double-layer region was provided by Bard,[5] who used a surface interrogation mode of scanning electrochemical microscopy to quantify the extent of this process that forms incipient oxides on the surface. These were estimated to be as high as 20% of a monolayer. This correlated with contact electrode resistance measurements,[6] capacitance measurements[7] and also electroreflection techniques...

Did socio-ecological factors drive the spatiotemporal patterns of pandemic influenza A (H1N1)?

BACKGROUND Pandemic influenza A (H1N1) has a significant public health impact. This study aimed to examine the effect of socio-ecological factors on the transmission of H1N1 in Brisbane, Australia. METHODOLOGY We obtained data from Queensland Health on numbers of laboratory-confirmed daily H1N1 in Brisbane by statistical local areas (SLA) in 2009. Data on weather and socio-economic index were obtained from the Australian Bureau of Meteorology and the Australian Bureau of Statistics, respectively. A Bayesian spatial conditional autoregressive (CAR) model was used to quantify the relationship between variation of H1N1 and independent factors and to determine its spatiotemporal patterns. RESULTS Our results show that average increase in weekly H1N1 cases were 45.04% (95% credible interval (CrI): 42.63-47.43%) and 23.20% (95% CrI: 16.10-32.67%), for a 1 °C decrease in average weekly maximum temperature at a lag of one week and a 10mm decrease in average weekly rainfall at a lag of one week, respectively. An interactive effect between temperature and rainfall on H1N1 incidence was found (changes: 0.71%; 95% CrI: 0.48-0.98%). The auto-regression term was significantly associated with H1N1 transmission (changes: 2.5%; 95% CrI: 1.39-3.72). No significant association between socio-economic indexes for areas (SEIFA) and H1N1 was observed at SLA level. CONCLUSIONS Our results demonstrate that average weekly temperature at lag of one week and rainfall at lag of one week were substantially associated with H1N1 incidence at a SLA level. The ecological factors seemed to have played an important role in H1N1 transmission cycles in Brisbane, Australia.

Can an Australian rap fan be a social actor in the African-American social movements?

I live in the Sydney North Shore suburb of Northbridge. In many ways it is a white middle class enclave, comparable to places like Cabramatta that are identified with a specifically represented ethnic group. Gated primarily by the inflated property prices, it is a location that marks a territory principally for the white middle class. It is not a place of African-American movements. Or is it? Radio, television, film and Internet increasingly constitute a large portion of the sonic and visual landscapes of our suburban lives. In our lounge rooms and in our cars we are presented texts that take us beyond our local environments, into the places of other nations. This paper will explore the position of a fan of rap music, physically located beyond the cultural and political circumstances that drive sustained action for the movements of African-Americans. It will analyze whether such a fandom can indicate membership, as a social actor, in this group and in doing so illuminate the boundaries of movement activity in an information society.

Annual miles drive used car prices

This paper investigates whether the net benefits from owning a vehicle, proxied by annual miles driven, explain the price declines observed over a vehicle's life. We first model the household decision on how much to drive each of its vehicles. Then we empirically establish that variation in household annual miles across brands explains observed price declines. Furthermore, the effect of vehicle age on annual miles decisions (and consequently on market value) depends on household characteristics and the composition of the vehicle stock owned.

A combinatorial approach to anonymous membership broadcast

A set system (X, F ) with X= {x 1,...,x m}) and F = {B1...,B n }, where B i ⊆ X, is called an (n, m) cover-free set system (or CF set system) if for any 1 ≤ i, j, k ≤ n and j ≠ k, |B i >2 |B j ∩ B k | +1. In this paper, we show that CF set systems can be used to construct anonymous membership broadcast schemes (or AMB schemes), allowing a center to broadcast a secret identity among a set of users in a such way that the users can verify whether or not the broadcast message contains their valid identity. Our goal is to construct (n, m) CF set systems in which for given m the value n is as large as possible. We give two constructions for CF set systems, the first one from error-correcting codes and the other from combinatorial designs. We link CF set systems to the concept of cover-free family studied by Erdös et al in early 80’s to derive bounds on parameters of CF set systems. We also discuss some possible extensions of the current work, motivated by different application.

Oscillating magnetic field current drive in a spherical plasma device

The continuous steady-state current drive in a spherical argon plasma by transverse oscillating magnetic field (OMF) is investigated. The experimental results reveal that a rotating magnetic field is generated, and its amplitude depends linearly on the external steady vertical magnetic field. It has been shown that steady toroidal currents of up to about 400 A can be driven by a 490 kHz OMF with an input power of 1.4 kW. The generation of steady toroidal magnetic fields directed oppositely in the upper and lower hemispheres have been recorded. The measurements of time-varying magnetic fields unveil a strong nonlinear effect of the frequency-doubled field harmonics generation. The electron number density and temperature of up to 6.2×1018 m-3 and 12 eV have been obtained. The observed effects validate the existing theory of the OMF current drive in spherical plasmas.

New constructions of anonymous membership broadcasting schemes

An anonymous membership broadcast scheme is a method in which a sender broadcasts the secret identity of one out of a set of n receivers, in such a way that only the right receiver knows that he is the intended receiver, while the others can not determine any information about this identity (except that they know that they are not the intended ones). In a w-anonymous membership broadcast scheme no coalition of up to w receivers, not containing the selected receiver, is able to determine any information about the identity of the selected receiver. We present two new constructions of w-anonymous membership broadcast schemes. The first construction is based on error-correcting codes and we show that there exist schemes that allow a flexible choice of w while keeping the complexities for broadcast communication, user storage and required randomness polynomial in log n,. The second construction is based on the concept of collision-free arrays, which is introduced in this paper. The construction results in more flexible schemes, allowing trade-offs between different complexities.

The drive towards user-centred engineering in automotive design

Falling sales in Europe and increasing global competition is forcing automotive manufacturers to develop a customer-based approach to differentiate themselves from the similarly technologically-optimised crowd. In spite of this new approach, automotive firms are still firmly entrenched in their reliance upon technology-driven innovation, to design, develop and manufacture their products, placing customer focus on a downstream sales role. However the time-honoured technology-driven approach to vehicle design and manufacture is coming into question, with the increasing importance of accounting for consumer needs pushing automotive engineers to include the user in their designs. The following paper examines the challenges and opportunities for a single global automotive manufacturer that arise in seeking to adopt a user-centred approach to vehicle design amongst technical employees. As part of an embedded case study, engineers from this manufacturer were interviewed in order to gauge the challenges, barriers and opportunities for the adoption of user-centred design tools within the engineering design process. The analysis of these interviews led to the proposal of the need for a new role within automotive manufacturers, the “designeer”, to bridge the divide between designers and engineers and allow the engineering process to transition from a technology-driven to a user- centred approach.

Organisational factors that drive fundraising effectiveness in Australian health charities

This research sought to explore organisational factors that drive successful fundraising. Drawing on Strategic Management theory, this qualitative study examined the key intraorganisational factors that organisations develop to be effective at fundraising within the context of extraorganisational factors that can affect fundraising effectiveness. In this way, it helps build a fundraising effectiveness theory. The findings from this study afford leaders of nonprofits an opportunity to reflect on their reasons for pursuing fundraising as an income stream, their level of understanding of fundraising, the degree of investment they are willing to make and the critical leadership required by the CEO.

Continuing to drive while sleepy : the influence of sleepiness countermeasures, motivation for driving sleepy, and risk perception

Driver sleepiness is a major contributor to road crashes. The current study sought to examine the association between perceptions of effectiveness of six sleepiness countermeasures and their relationship with self-reports of continuing to drive while sleepy among 309 drivers after controlling for the influence of age, sex, motivation for driving sleepy, and risk perception of sleepy driving. The results demonstrate that the variables of age, sex, motivation, and risk perception were significantly associated with self-reports of continuing to drive while sleepy and only one countermeasure was associated with self-reports of continuing to drive while sleepy. Further, it was found that age differences in self-reports of continuing to drive while sleepy was mediated by participants’ motivation and risk perception. These findings highlight modifiable factors that could be focused on with interventions that seek to modify drivers’ attitudes and behaviours of driving while sleepy.

Innate transcriptional networks activated in bladder in response to uropathogenic Escherichia coli drive diverse biological pathways and rapid synthesis of IL-10 for defense against bacterial urinary tract infection

Early transcriptional activation events that occur in bladder immediately following bacterial urinary tract infection (UTI) are not well defined. In this study, we describe the whole bladder transcriptome of uropathogenic Escherichia coli (UPEC) cystitis in mice using genome-wide expression profiling to define the transcriptome of innate immune activation stemming from UPEC colonization of the bladder. Bladder RNA from female C57BL/6 mice, analyzed using 1.0 ST-Affymetrix microarrays, revealed extensive activation of diverse sets of innate immune response genes, including those that encode multiple IL-family members, receptors, metabolic regulators, MAPK activators, and lymphocyte signaling molecules. These were among 1564 genes differentially regulated at 2 h postinfection, highlighting a rapid and broad innate immune response to bladder colonization. Integrative systems-level analyses using InnateDB (http://www.innatedb.com) bioinformatics and ingenuity pathway analysis identified multiple distinct biological pathways in the bladder transcriptome with extensive involvement of lymphocyte signaling, cell cycle alterations, cytoskeletal, and metabolic changes. A key regulator of IL activity identified in the transcriptome was IL-10, which was analyzed functionally to reveal marked exacerbation of cystitis in IL-10–deficient mice. Studies of clinical UTI revealed significantly elevated urinary IL-10 in patients with UPEC cystitis, indicating a role for IL-10 in the innate response to human UTI. The whole bladder transcriptome presented in this work provides new insight into the diversity of innate factors that determine UTI on a genome-wide scale and will be valuable for further data mining. Identification of protective roles for other elements in the transcriptome will provide critical new insight into the complex cascade of events that underpin UTI.