Multi-objective design optimisation of GFRP sandwich beams

A novel Glass Fibre Reinforced Polymer (GFRP) sandwich panel was developed by an Australian manufacturer for civil engineering applications. This research is motivated by the new applications of GFRP sandwich structures in civil engineering such as slab, beam, girder and sleeper. An optimisation methodology is developed in this work to enhance the design of GFRP sandwich beams. The design of single and glue laminated GFRP sandwich beam were conducted by using numerical optimisation. The numerical multi-objective optimisation considered a design two objectives simultaneously. These objectives are cost and mass. The numerical optimisation uses the Adaptive Range Multi-objective Genetic Algorithm (ARMOGA) and Finite Element (FE) method. Trade-offs between objectives was found during the optimisation process. Multi-objective optimisation shows a core to skin mass ratio equal to 3.68 for the single sandwich beam cross section optimisation and it showed that the optimum core to skin thickness ratio is 11.0.

Towards university lectures' conceptions of student learning

A range of studies conducted since the late 1970s have sought to describe students' conceptions of learning, and more recently, teachers' conceptions of teaching. These studies, using what has come to be known as the phenomenographic approach, have identified conceptions of teaching, and conceptions of learning which have had a significant impact on the teaching-learning culture of higher education institutions in many parts of the world. The study reported here contributes to our understanding of student learning, describing it from the viewpoint of lectures from a range of disciplines. From the viewpoint of these lectures student learning was seen variously as: acquiring knowledge through the use of study skills; the absorption of new knowledge and being able to explain and apply it; the development of thinking skills and the ability to reason; developing the competencies of beginning professionals; changing personal attitudes, beliefs or behaviours in responding to different phenomena; and a participative pedagogic experience. The relationship between these conceptions and previously identified conceptions of teaching and learning is discussed.

Design optimisation of ironless motors based on magnet selection

This paper considers the design of a radial flux permanent magnet iron less core brushless DC motor for use in an electric wheel drive with an integrated epicyclic gear reduction. The motor has been designed for a continuous output torque of 30 Nm and peak rating of 60 Nm with a maximum operating speed of 7000 RPM. In the design of brushless DC motors with a toothed iron stator the peak air-gap magnetic flux density is typically chosen to be close to that of the remanence value of the magnets used. This paper demonstrates that for an ironless motor the optimal peak air-gap flux density is closer to the maximum energy product of the magnets used. The use of a radial flux topology allows for high frequency operation and can be shown to give high specific power output while maintaining a relatively low magnet mass. Two-dimensional finite element analysis is used to predict the air-gap flux density. The motor design is based around commonly available NdFeB bar magnet size

Design optimisation of ironless motors based on magnet selection

This paper considers the design of a radial flux permanent magnet ironless core brushless DC motor for use in an electric wheel drive with an integrated epicyclic gear reduction. The motor has been designed for a continuous output torque of 30 Nm and peak rating of 60 Nm with a maximum operating speed of 7000 RPM. In the design of brushless DC motors with a toothed iron stator the peak air-gap magnetic flux density is typically chosen to be close to that of the remanence value of the magnets used. This paper demonstrates that for an ironless motor the optimal peak air-gap flux density is closer to the maximum energy product of the magnets used. The use of a radial flux topology allows for high frequency operation and can be shown to give high specific power output while maintaining a relatively low magnet mass. Two-dimensional finite element analysis is used to predict the airgap flux density. The motor design is based around commonly available NdFeB bar magnet size

Reframing Conceptions of Contemporary Literacy Capabilities in Pre-Service Primary Teacher Education

This chapter describes the challenges of integrating new technologies with literacy education in pre-service primary teacher education in Australia. The authors describe the policy context and regulatory mechanisms controlling pre-service education, including a national set of professional standards for graduate teachers, a new national curriculum for school students, the introduction of high stakes national assessment for school students, and the looming threat of decontextualized back-to-the-basics professional entry tests for aspiring teachers. The chapter includes three case studies of the authors’ pedagogical practices that attempt to reframe conceptions of the literacy capabilities of pre-service teachers to reflect the complex and sophisticated requirements of teachers in contemporary schooling. The authors conclude the chapter with a discussion of the implications of these case studies as they illustrate the ways that pre-service teachers can be scaffolded and supported to develop creative capacity and critical awareness of the kinds of literacies required in the digital age despite restrictive regimes.

Queensland teachers' conceptions of creativity : a phenomenographic investigation

This study investigated conceptions of creativity in a group of Queensland teachers. The analysis of interview data produced precise descriptions of seven categories of meanings of creativity, delimiting the range and variance of meanings expressed. The study provides evidence of two distinct ways of experiencing and defining creativity. As a result the researcher was able to propose further research directions to extend educational understanding of creativity and recommended using the present study findings to strengthen policy and training measures for the Australian Curriculum focus on building creative capital.

Aboriginal and Torres Strait Islander university students conceptions of formal learning and experiences of informal learning

This paper describes an investigation of conceptions of learning held by 22 Aboriginal and Torres Strait Islander students from three universities in Queensland, Australia. Other areas investigated were students' experiences of informal learning, their reasons for studying and the strategies they used to learn. Research into conceptions of learning is gaining impetus and current beliefs include the premise that approaches to learning adopted by university students, and hence learning outcomes, are closely related to their conceptions of learning. There is substantial research focused on Aboriginal learning styles in early childhood and primary school which indicates that Aboriginal children prefer to learn in a practical way as well as through observation and imitation and trial and error. Very little research has focused specifically on Aboriginal university students' conceptions of learning. Results of this study found that these students view and approach formal university learning in much the same way as other university students and most hold quantitative conceptions of learning. The most interesting result was the difference between students' conceptions of formal learning and their experiences of informal learning. Many students' experiences of informal learning were grounded in practical activities or exhibited a cultural focus, however, most formal learning is not dependent upon practical or cultural knowledge. It is proposed that formal learning for Indigenous students recognise and include an Indigenous perspective such as integrating, where appropriate, practical strategies for learning. We also suggest that Indigenous students be helped to develop conceptions that will enable them to learn formal, theoretical material successfully.

Conceptions of learning held by Aboriginal students in a tertiary program in Indigenous primary health care

This paper is a description of a pilot investigation into conceptions of learning held by a sample of 10 Aboriginal students in a Bachelors degree courses. Results from this study suggest that this group of students view and approach learning in much the same way as other university students. They mostly hold quantitative conceptions of learning and use repetitive strategies which are potentially at odds with the objectives and procedures of the problems based program in which they are studying.

On the operationalisation of conceptions of learning in higher education and their association with students’ knowledge and experiences of their learning

Conceptions of learning, as well as other associated aspects of prior knowledge, are theoretically important factors in influencing the manner in which the content and context of learning are engaged. The present study reports on: (a) the operationalisation of some of these factors aimed at isolating sources of explanatory variation that can be used for modelling purposes; and (b) a conservative exploration of the discriminatory power of, and exhibited patterns of association between, such sources of variation as have been isolated. Based on a conservative analytical approach, the results of the present study do not support a single clearly defined empirical model of conceptions of learning and associated constructs. Instead, there is consistent evidence that underlying empirical structures appear to be sensitive to the response context and other factors.

Fire design rules of light gauge steel frame walls – a review

Cold-formed steel members are widely used in load bearing Light gauge steel frame (LSF) wall systems with plasterboard linings on both sides. However, these thin-walled steel sections heat up quickly and lose their strength under fire conditions despite the protection provided by plasterboards. Hence there is a need for simple fire design rules to predict their load capacities and fire resistance ratings. During fire events, the LSF wall studs are subjected to non-uniform temperature distributions that cause thermal bowing, neutral axis shift and magnification effects and thus resulting in a combined axial compression and bending action on the LSF wall studs. In this research a series of full scale fire tests was conducted first to evaluate the performance of LSF wall systems with eight different wall configurations under standard fire conditions. Finite element models of LSF walls were then developed, analysed under transient and steady state conditions, and validated using full scale fire tests. Using the results from fire tests and finite element analyses, a detailed investigation was undertaken into the prediction of axial compression strength and failure times of LSF wall studs in standard fires using the available fire design rules based on Australian, American and European standards. The results from both fire tests and finite element analyses were used to investigate the ability of these fire design rules to include the complex effects of non-uniform temperature distributions and their accuracy in predicting the axial compression strengths of wall studs and the failure times. Suitable modifications were then proposed to the fire design rules. This paper presents the details of this investigation into the accuracy of using currently available fire design rules of LSF walls and the results.

Primary school teachers' conceptions of pedagogical responses to concepts of diverse sexualities

This thesis reports on a social constructionist study that identified teachers' conceptions of their pedagogical responses to concepts of diverse sexualities in primary schools in Queensland. The study shows that teachers face a range of scenarios in which students raise awareness of diverse sexualities as part of their everyday experiences, yet teachers have little guidance about how to respond.

Design & performance of a networked ad-hoc acoustic communications system using inexpensive commercial CDMA modems

We present a new approach for creating and implementing an ad-hoc underwater acoustic sensor network based on connecting a small processor to the serial port of a commercial CDMA acoustic modem. The processor acts as a "node controller" providing the networking layer that the modems lack. The ad-hoc networking protocol is based on a modified dynamic source routing (DSR) approach and can be configured for maximising information throughput or minimising energy expenditure. The system was developed in simulation and then evaluated during field trials using a 10 node deployment. Experimental results show reliable multi-hop networking under a variety of network configurations, with the added ability to determine internode ranges to within 1.5 m for localisation.