Prediction of the wash-off of traffic related semi- and non-volatile organic compounds from urban roads under climate change influenced rainfall characteristics

Traffic generated semi and non volatile organic compounds (SVOCs and NVOCs) pose a serious threat to human and ecosystem health when washed off into receiving water bodies by stormwater. Climate change influenced rainfall characteristics makes the estimation of these pollutants in stormwater quite complex. The research study discussed in the paper developed a prediction framework for such pollutants under the dynamic influence of climate change on rainfall characteristics. It was established through principal component analysis (PCA) that the intensity and durations of low to moderate rain events induced by climate change mainly affect the wash-off of SVOCs and NVOCs from urban roads. The study outcomes were able to overcome the limitations of stringent laboratory preparation of calibration matrices by extracting uncorrelated underlying factors in the data matrices through systematic application of PCA and factor analysis (FA). Based on the initial findings from PCA and FA, the framework incorporated orthogonal rotatable central composite experimental design to set up calibration matrices and partial least square regression to identify significant variables in predicting the target SVOCs and NVOCs in four particulate fractions ranging from >300-1 μm and one dissolved fraction of <1 μm. For the particulate fractions range >300-1 μm, similar distributions of predicted and observed concentrations of the target compounds from minimum to 75th percentile were achieved. The inter-event coefficient of variations for particulate fractions of >300-1 μm were 5% to 25%. The limited solubility of the target compounds in stormwater restricted the predictive capacity of the proposed method for the dissolved fraction of <1 μm.

Tax expenditures in Australia : the elevation from ‘disguised’ expenditures to architectural pillars of the 21st century

The current Australian Treasury approach to tax expenditures management and reporting is a culmination of 36 years of Government and Parliamentary reviews and reports. The most notable outcome of these reviews and reports is the publication of the annual tax expenditures statement, which commenced in 1986. Since its inception, the Australian annual tax expenditures statements have themselves been the subject of review. Most recently, the Australian National Audit Office has undertaken a performance audit in the Department of the Treasury and released its report entitled Preparation of the Tax Expenditures Statement. In addition to this 2008 report, a second recent opportunity to consider tax expenditures within the Australian tax regime has arisen. The Australian tax system is currently undergoing a comprehensive and broad review with the terms of reference requiring a consideration of all relevant tax expenditures. While the recommendations of the Australian National Audit Office are not novel, and it is not unusual for a broader review to consider the role of tax expenditures within the Australian tax system, both the recommendations of the Australian National Audit Office and the views of the current Review Panel take on a renewed sense of importance given the proliferation of tax expenditures in Australia. Tax expenditures, in terms of number and pecuniary value, have increased significantly in Australia in recent years. The latest Tax Expenditures Statement lists around 320 tax expenditures with the pecuniary value of those expenditures estimated at $73.69 billion or 7.1% of GDP. The largest category of tax expenditures listed in the 2008 Tax Expenditures Statement, totalling $29.23 billion, relate to concessions aimed at retirement savings.

Disputes in Everyday Life : Social and Moral Orders of Children and Young People

"The research presented in this volume has been undertaken in a range of settings and across ages, to display the rich, varied, and complex aspects of children and young people's everyday lives. The papers contribute to understanding children's disputes, framed as forms of social practice, by closely examining children's talk and interaction in disputes to offer insight into how they arrange their social lives within the context of school, home, neighborhood, correctional, and cafe settings. As such, this volume contributes to an emerging body of edited volumes that investigate children and young people's everyday interactions (Cromdal, 2009; Cromdal & Tholander, in press; Gardner & Forrester, 2010; Goodwin & Kyratzis, 2007; Hutchby & Moran-Ellis, 1998). Each paper has been peer reviewed, by respected researchers of the field, in some cases authors of this volume, and revised. We also thank Charlotte Cobb-Moore who so ably assisted in the final preparation of the manuscripts."---publisher website

Vapour phase assembly of a halogen bonded complex of an isoindoline nitroxide and 1,2-diiodotetrafluorobenzene

Vapour phase assembly has been used for the first time to prepare co-crystals in which the primary intermolecular interaction is halogen bonding. Co-crystals of the nitroxide 1,1,3,3-tetramethylisoindolin-2-yloxyl (TMIO) and 1,2-diiodotetrafluorobenzene (1,2-DITFB) are readily formed under standard sublimation conditions. Single crystal X-ray diffraction confirmed the structure of a 2:2 cyclic tetramer, (TMIO)2·(1,2-DITFB)2, which exhibits a new halogen bonding motif, with each nitroxide oxygen atom accepting two halogen bonds. Powder X-ray diffraction confirmed the homogeneity of the bulk sample. The crystalline complex was further characterized in the solid state using thermal analysis and vibrational spectroscopy (infrared and Raman). Density functional theory calculations were also used to evaluate the enthalpy of formation, electrostatic potential and unpaired electron density of the complex. These findings illustrate the preparation of co-crystals where solution state methodology is problematic and the potential of this approach for the formation of novel organic spin systems.

Nonprofit organisations and public policy : exploring the research role of the Brotherhood of St Laurence

This paper begins to explore the role of the Brotherhood of St Laurence as a nonprofit welfare organisation and its influence on public policy in Australia. The Brotherhood's impact on Australian social policy has been evident through a range of actions: the production of research on relevant social issues; the preparation of submissions and position papers and involvement in consultations with governments on social policy; and the personal influence of many of the charismatic (mostly) men who have led the organisation throughout its history. This paper highlights the Brotherhood’s research aspect and speculates upon the impact of its considerable research contribution. The Brotherhood has been involved in service delivery through a range of often innovative programs throughout its history, but the organisation's involvement in research and advocacy has rendered it unique in comparison to any other nonprofit welfare organisation in Australia. This paper finds that different kinds of research can be utilised in different ways; by studying the output of the Brotherhood it will explore and highlight how knowledge utilisation takes place. [Introduction]

Becoming Partners: Partnerships reshaping preservice teachers’ preparation to teach in rural Queensland schools

Preparing preservice teachers for successful rural and remote teaching is an ongoing and significant issue that impacts on equity issues for Australian students (Sharplin, 2002) and the sustainability of rural communities (Green & Reid, 2004). Improving the preparation of preservice teachers for teaching in rural schools is a key recommendation from the Human Rights and Equal Opportunity Commission (2000). This presentation analyses how an innovative partnership between a teacher employer and a teacher education institution as a response to a mandated reform within the Improving Teacher Quality National Partnership Agreement has been established to address the important need to prepare and recruit preservice teachers to teach in rural and remote areas of Queensland.

Identification of bone morphogenetic proteins 2 and 4 in commercial demineralized freeze-dried bone allograft preparations : pilot study

BACKGROUND: Demineralized freeze-dried bone allografts (DFDBAs) have been proposed as a useful adjunct in periodontal therapy to induce periodontal regeneration through the induction of new bone formation. The presence of bone morphogenetic proteins (BMPs) within the demineralized matrix has been proposed as a possible mechanism through which DFDBA may exert its biologic effect. However, in recent years, the predictability of results using DFDBA has been variable and has led to its use being questioned. One reason for the variability in tissue response may be attributed to differences in the processing of DFDBA, which may lead to loss of activity of any bioactive substances within the DFDBA matrix. Therefore, the purpose of this investigation was to determine whether there are detectable levels of bone morphogenetic proteins in commercial DFDBA preparations. METHODS: A single preparation of DFDBA was obtained from three commercial sources. Each preparation was studied in triplicate. Proteins within the DFDBA samples were first extracted with 4M guanidinium HCI for seven days at 40 degrees celsius and the residue was further extracted with 4M guanidinium HCL/EDTA for seven days at 40 degrees celsius. Two anti-human BMP-2 and -4 antibodies were used for the detection of the presence of BMP's in the extracts. RESULTS: Neither BMP-2 nor BMP-4 was detected in any of the extracts. When recombinant human BMP-2 and -4 were added throughout the extraction process of DFDBA extraction, not only were intact proteins detected but smaller molecular weight fragments were also noted in the extract. CONCLUSIONS: These results indicate that all of the DFDBA samples tested had no detectable amounts of BMP-2 and -4. In addition, an unknown substance present in the DFDBA may be responsible for degradation of whatever BMPs might be present.

Using the Donabedian framework to examine the quality and safety of nursing service innovation

Aims and objectives To evaluate the safety and quality of nurse practitioner service using the audit framework of Structure,Process and Outcome. Background Health service and workforce reform are on the agenda of governments and other service providers seeking to contain healthcare costs whilst providing safe and effective health care to communities. The nurse practitioner service is one health workforce innovation that has been adopted globally to improve timely access to clinical care, but there is scant literature reporting evaluation of the quality of this service innovation. Design. A mixed-methods design within the Donabedian evaluation framework was used. Methods The Donabedian framework was used to evaluate the Structure, Process and Outcome of nurse practitioner service. A range of data collection approaches was used, including stakeholder survey (n=36), in-depth interviews (11 patients and 13 nurse practitioners) and health records data on service processes. Results The study identified that adequate and detailed preparation of Structure and Process is essential for the successful implementation of a service innovation. The multidisciplinary team was accepting of the addition of nurse practitioner service, and nurse practitioner clinical care was shown to be effective, satisfactory and safe from the perspective of the clinician stakeholders and patients. Conclusions This study demonstrated that the Donabedian framework of Structure, Process and Outcome evaluation is a valuable and validated approach to examine the safety and quality of a service innovation. Furthermore, in this study, specific Structure elements were shown to influence the quality of service processes further validating the framework and the interdependence of the Structure, Process and Outcome components. Relevance to clinical practice Understanding the structure and process requirements for establishing nursing service innovation lays the foundation for safe, effective and patient-centred clinical care.

Preparing the next generation of HRM professionals : an international comparison of tertiary HRM programs

The future of the HRM profession depends to at least some extent on the quality of preparation of the next generation of HR professionals. This paper examines bachelor degree programs in HRM and the role of professional associations as influencers of curricula. Some 39% of the 599 AACSB and EQUIS-accredited institutions sampled offer undergraduate degrees in HRM. The programs vary in emphasis on HRM competencies. Unsurprisingly, all include foundation work (perhaps a third of the content) in business management. Grouping degree content by regions globally allows benchmarking of degrees against international trends, along with consideration of the increasingly significant influence on curricula by professional bodies, in preparing the next generation of HRM practitioners to manage in organisations that will require strategic thinking, specialist technical skills, and interpersonal competence.

Implementation Guide for Surveillance of Staphylococcus aureus Bacteraemia -- [Consultation Edition]

The Implementation Guide for the Hospital Surveillance of SAB has been produced by the Healthcare Associated Infection (HAI) Technical Working Group of the Australian Commission on Safety and Quality in Health Care (ACSQHC), and endorsed by the HAI Advisory Group. The Technical Working Group is made up of representatives invited from surveillance units and the ACSQHC, who have had input into the preparation of this Guide. The Guide has been developed to ensure consistency in reporting of SAB across public and private hospitals to enable accurate national reporting and benchmarking. It is intended to be used by Australian hospitals and organisations to support the implementation of healthcare associated Staphylococcus aureus bacteraemia(SAB) surveillance using the endorsed case definition1 in the box below and further detail in the Data Set Specification.

Retention and graduation of Aboriginal and Torres Strait Islander students in initial teacher education : a review of the literature

While the need to increase numbers of Indigenous teachers has been highlighted for many years, Aboriginal and Torres Strait Islander teachers are still significantly underrepresented in Australia making up less that 1% of teachers in schools. Nationally, little has changed since the 1980s when Hughes and Wilmot (1992) called for ‘1000 Indigenous teachers by 1990’. This paper reports on an initial literature review of teacher education as related to the preparation of Aboriginal and Torres Strait Islanders. Alongside the scholarly literature, the review to date includes analysis of over twenty policy documents and government reports as well as web-based descriptions of historical and current models of Indigenous teacher education including both mainstream Education programs and cohort-based and community models. While the literature provides examples of successful models of Indigenous teacher education it also illuminates the longstanding and interrelated factors that continue to impact on the success or failure of teacher education for Aboriginal and Torres Strait Islanders

Catalytic cracking of tar derived from rice hull gasification over palygorskite-supported Fe and Ni

The catalytic performance of Fe–Ni/PG (PG: palygorskite) catalysts pre-calcined and reduced at 500 ◦C for catalytic decomposition of tar derived through rice hull gasification was investigated. The materials were characterized by using X-ray diffraction, hydrogen temperature reduction, and transmission electron microscopy. The results showed that ferrites with spinel structure ((Fe, Ni)3O4) were formed during preparation of bimetallic systems during calcination and reduction of the precursors (Fe–Ni/PG catalysts) and NiO metal oxide particles were formed over Fe6–Ni9/PG catalyst. The obtained experimental data showed that Fe–Ni/PG catalysts had greater catalytic activity than natural PG. Tar removal using Fe6–Ni9/PG catalyst was as high as Fe10–Ni6/PG catalyst (99.5%). Fe6–Ni9/PG showed greater catalytic activity with greater H2 yield and showed stronger resistance to carbon deposition, attributed to the presence of NiO nanoparticles. Thus, the addition of nickel and iron oxides played an important role in catalytic cracking of rice hull biomass tar.

Fabrication and characterisation of graphene oxide-epoxy nanocomposite

Adequate amount of graphene oxide (GO) was firstly prepared by oxidation of graphite and GO/epoxy nanocomposites were subsequently prepared by typical solution mixing technique. X-ray diffraction (XRD) pattern, X-ray photoelectron (XPS), Raman and Fourier transform infrared (FTIR) spectroscopy indicated the successful preparation of GO. Scanning electron microscopy (SEM) and Transmission electron microscopy (TEM) images of the graphite oxide showed that they consist of a large amount of graphene oxide platelets with a curled morphology containing of a thin wrinkled sheet like structure. AFM image of the exfoliated GO signified that the average thickness of GO sheets is ~1.0 nm which is very similar to GO monolayer. Mechanical properties of as prepared GO/epoxy nanocomposites were investigated. Significant improvements in both Young’s modulus and tensile strength were observed for the nanocomposites at very low level of GO loading. The Young’s modulus of the nanocomposites containing 0.5 wt% GO was 1.72 GPa, which was 35 % higher than that of the pure epoxy resin (1.28 GPa). The effective reinforcement of the GO based epoxy nanocomposites can be attributed to the good dispersion and the strong interfacial interactions between the GO sheets and the epoxy resin matrices.

Methyl ester preparation from peanut oil and its effect on DI diesel engine combustion

This study investigated the preparation of methyl ester (Biodiesel) from peanut oil by transesterification method and its effect on DI diesel engine. Two parameters were measured during the engine operation: one is engine performance (brake thermal efficiency and brake specific fuel consumption), and the other is the exhaust emissions (NOx and CO). The result showed that, when compared with neat diesel fuel, the brake thermal efficiency of biodiesel blend was almost similar or a slight lower. However, brake specific fuel consumption (bsfc) was a little higher than neat diesel. CO was lower and NOx was little higher with biodiesel blend than that of diesel. The engine performance for B10 and B20 was very similar. At medium and high load conditions the engine emissions for B10 and B20 has no significant variation. Hence, B20 can safely be used in diesel engine without any significant penalty in engine performance and emissions.

Biomechanical aspects of seating comfort in vehicle seating package engineering

In this paper, problems are described which are related to the ergonomic assessment of vehicle package design in vehicle systems engineering. The traditional approach, using questionnaire techniques for a subjective assessment of comfort related to package design, is compared to a biomechanical approach. An example is given for ingress design. The biomechanical approach is based upon objective postural data. The experimental setup for the study is described and methods used for the biomechanical analysis are explained. Because the biomechanic assessment requires not only a complex experimental setup but also time consuming data processing, a systematic reduction and preparation of biomechanic data for classification with an Artificial Neural Network significantly improves the economy of the biomechanical method.