Postcards from somewhere : ‘marginal’ cultural production, creativity and community

This paper focuses on a case study of local postcard production in a rural community in Western Australia. Drawing on in-depth interviews with key producers of these postcards, the analysis presented explores perceptions of and contexts for the emergence of this production, in turn examining the notion of ‘creativity’ articulated and privileged by this cultural work. Connections are identified between the making of postcards, the broader historical field of local cultural work and the construction of community. This, in turn, forms the basis for consideration of the role and relativity of ‘marginality’.

Indications of energetic consequences of decoherence at short times for scattering from open quantum systems

Decoherence of quantum entangled particles is observed in most systems, and is usually caused by system-environment interactions. Disentangling two subsystems A and B of a quantum systemAB is tantamount to erasure of quantum phase relations between A and B. It is widely believed that this erasure is an innocuous process, which e.g. does not affect the energies of A and B. Surprisingly, recent theoretical investigations by different groups showed that disentangling two systems, i.e. their decoherence, can cause an increase of their energies. Applying this result to the context of neutronCompton scattering from H2 molecules, we provide for the first time experimental evidence which supports this prediction. The results reveal that the neutron-proton collision leading to the cleavage of the H-H bond in the sub-femtosecond timescale is accompanied by larger energy transfer (by about 3%) than conventional theory predicts. It is proposed to interpreted the results by considering the neutron-proton collisional system as an entangled open quantum system being subject to decoherence owing to the interactions with the “environment” (i.e., two electrons plus second proton of H2).

High pressure in situ diffraction studies of metal–hydrogen systems

“Hybrid” hydrogen storage, where hydrogen is stored in both the solid material and as a high pressure gas in the void volume of the tank can improve overall system efficiency by up to 50% compared to either compressed hydrogen or solid materials alone. Thermodynamically, high equilibrium hydrogen pressures in metal–hydrogen systems correspond to low enthalpies of hydrogen absorption–desorption. This decreases the calorimetric effects of the hydride formation–decomposition processes which can assist in achieving high rates of heat exchange during hydrogen loading—removing the bottleneck in achieving low charging times and improving overall hydrogen storage efficiency of large hydrogen stores. Two systems with hydrogenation enthalpies close to −20 kJ/mol H2 were studied to investigate the hydrogenation mechanism and kinetics: CeNi5–D2 and ZrFe2−xAlx (x = 0.02; 0.04; 0.20)–D2. The structure of the intermetallics and their hydrides were studied by in situ neutron powder diffraction at pressures up to 1000 bar and complementary X-ray diffraction. The deuteration of the hexagonal CeNi5 intermetallic resulted in CeNi5D6.3 with a volume expansion of 30.1%. Deuterium absorption filled three different types of interstices, Ce2Ni2 and Ni4 tetrahedra, and Ce2Ni3 half-octahedra and was accompanied by a valence change for Ce. Significant hysteresis was observed between deuterium absorption and desorption which profoundly decreased on a second absorption cycle. For the Al-modified Laves-type C15 ZrFe2−xAlx intermetallics, deuteration showed very fast kinetics of H/D exchange and resulted in a volume increase of the FCC unit cells of 23.5% for ZrFe1.98Al0.02D2.9(1). Deuterium content, hysteresis of H/D uptake and release, unit cell expansion and stability of the hydrides systematically change with the amount of Al content. In the deuteride D atoms exclusively occupy the Zr2(Fe,Al)2 tetrahedra. Observed interatomic distances are Zr–D = 1.98–2.11; (Fe, Al)–D = 1.70–1.75A˚ . Hydrogenation slightly increases the magnetic moment of the Fe atoms in ZrFe1.98Al0.02 and ZrFe1.96Al0.04 from 1.9 �B at room temperature for the alloy to 2.2 �B for its deuteride.

Exposure to ambient heat and urolithiasis among outdoor workers in Guangzhou, China

Objectives: To assess the impact of exposure to ambient heat on urolithiasis among outdoor workers in a subtropical city of China. Methods: The 2003–2010 health check data of a shipbuilding company in Guangzhou, China were acquired. 190 cases and 760 matched controls were involved in this study. We assessed the relationship between exposure to ambient heat and urolithiasis for different occupations using conditional logistic regression. Results: Spray painters were most likely to develop urolithiasis (OR = 4.4; 95% CI: 1.7, 11.4), followed by smelter workers (OR = 4.0; 95% CI: 1.8, 9.2), welders (OR = 3.7; 95% CI: 1.9, 7.2), production security and quality inspectors (OR = 2.7; 95% CI: 1.4, 3.0), and assemblers (OR = 2.2; 95% CI: 1.1, 4.3). Overall, outdoor workers were more likely to present with urolithiasis compared with indoor employees (p b 0.05). In addition, workers with longer cumulative exposure time (OR = 1.5; 95% CI: 1.2, 1.8) and abnormal blood pressure (OR = 1.6; 95% CI: 1.0, 2.5) had higher risk for urolithiasis. Conclusions: Our findings demonstrate a significant association between exposure to ambient heat and urolithiasis among outdoor working populations. Public health intervention strategies should be developed to specifically target outdoor occupations.

Lobbying the auditing practices board : analysis of responses to the expanded audit report

In 1993 the Auditing Practice Board (APB) in the United Kingdom issued Statement of Auditing Standard 600, Auditors’ Reports on Financial Statements. The new expanded audit report was issued in an attempt to reduce the audit expectations gap. Prior to the issuing of this standard the APB issued a Consultative Document in 1991 and an Exposure Draft in 1992. In this paper we investigate the comments made to the APB by respondents to these two documents. We found that a number of respondents doubted whether the new standard was of itself sufficient to reduce the expectations gap. In addition, we found that where respondents made substantive suggestions for changes to the proposed standard these generally were not implemented by the APB.

Plasma-enabled, catalyst-free growth of carbon nanotubes on mechanically-written Si features with arbitrary shape

Simple, rapid, catalyst-free synthesis of complex patterns of long, vertically aligned multiwalled carbon nanotubes, strictly confined within mechanically-written features on a Si(1 0 0) surface is reported. It is shown that dense arrays of the nanotubes can nucleate and fully fill the features when the low-temperature microwave plasma is in a direct contact with the surface. This eliminates additional nanofabrication steps and inevitable contact losses in applications associated with carbon nanotube patterns. Using metal catalyst has long been considered essential for the nucleation and growth of surface-supported carbon nanotubes (CNTs) [1] and [2]. Only very recently, the possibility of CNT growth using non-metallic (e.g., oxide [3] and SiC [4]) catalysts or artificially created carbon-enriched surface layers [5] has been demonstrated. However, successful integration of carbon nanostructures into Si-based nanodevice platforms requires catalyst-free growth, as the catalyst nanoparticles introduce contact losses, and their catalytic activity is very difficult to control during the growth [6]. Furthermore, in many applications in microfluidics, biological and molecular filters, electronic, sensor, and energy conversion nanodevices, the CNTs need to be arranged in specific complex patterns [7] and [8]. These patterns need to contain the basic features (e.g., lines and dots) written using simple procedures and fully filled with dense arrays of high-quality, straight, yet separated nanotubes. In this paper, we report on a completely metal or oxide catalyst-free plasma-based approach for the direct and rapid growth of dense arrays of long vertically-aligned multi-walled carbon nanotubes arranged into complex patterns made of various combinations of basic features on a Si(1 0 0) surface written using simple mechanical techniques. The process was conducted in a plasma environment [9] and [10] produced by a microwave discharge which typically generates the low-temperature plasmas at the discharge power below 1 kW [11]. Our process starts from mechanical writing (scribing) a pattern of arbitrary features on pre-treated Si(1 0 0) wafers. Before and after the mechanical feature writing, the Si(1 0 0) substrates were cleaned in an aqueous solution of hydrofluoric acid for 2 min to remove any possible contaminations (such as oil traces which could decompose to free carbon at elevated temperatures) from the substrate surface. A piece of another silicon wafer cleaned in the same way as the substrate, or a diamond scriber were used to produce the growth patterns by a simple arbitrary mechanical writing, i.e., by making linear scratches or dot punctures on the Si wafer surface. The results were the same in both cases, i.e., when scratching the surface by Si or a diamond scriber. The procedure for preparation of the substrates did not involve any possibility of external metallic contaminations on the substrate surface. After the preparation, the substrates were loaded into an ASTeX model 5200 chemical vapour deposition (CVD) reactor, which was very carefully conditioned to remove any residue contamination. The samples were heated to at least 800 °C to remove any oxide that could have formed during the sample loading [12]. After loading the substrates into the reactor chamber, N2 gas was supplied into the chamber at the pressure of 7 Torr to ignite and sustain the discharge at the total power of 200 W. Then, a mixture of CH4 and 60% of N2 gases were supplied at 20 Torr, and the discharge power was increased to 700 W (power density of approximately 1.49 W/cm3). During the process, the microwave plasma was in a direct contact with the substrate. During the plasma exposure, no external heating source was used, and the substrate temperature (∼850 °C) was maintained merely due to the plasma heating. The features were exposed to a microwave plasma for 3–5 min. A photograph of the reactor and the plasma discharge is shown in Fig. 1a and b.

Morphometric modelling of ageing in the human pubic symphysis : sexual dimorphism in an Australian population

Despite the prominent use of the pubic symphysis for age estimation in forensic anthropology, little has been documented regarding the quantitative morphological and micro-architectural changes of this surface. Specifically, utilising post-mortem computed tomography data from a large, contemporary Australian adult population, this study aimed to evaluate sexual dimorphism in the morphology and bone composition of the symphyseal surface; and temporal characterisation of the pubic symphysis in individuals of advancing age. The sample consisted of multi-slice computed tomography (MSCT) scans of the pubic symphysis(slice thickness: 0.5 mm, overlap: 0.1 mm) of 200 individuals of Caucasian ancestry aged 15–70 years, obtained in 2011. Surface rendering reconstruction of the symphyseal surface was conducted in OsiriX1 (v.4.1) and quantitative analyses in Rapidform XOSTM and OsteomeasureTM. Morphometric variables including inter-pubic distance, surface area, circumference, maximum height and width of the symphyseal surface and micro-architectural assessment of cortical and trabecular bone compositions were quantified using novel automated engineering software capabilities. The major results of this study are correlated with the macroscopic ossification and degeneration pattern of the symphyseal surface, demonstrating significant age-related changes in the morphometric and bone tissue variables between 15 and 70 years. Regardless of sex, the overall dimensions of the symphyseal surface increased with age, coupled with a decrease in bone mass in the trabecular and cortical bone compartments. Significant differences between the ventral, dorsal and medial cortical surfaces were observed, which may be correlated to bone formation activity dependent on muscle activity and ligamentous attachments. Our study demonstrates significant sexual dimorphism at this site, with males exhibiting greater surface dimensions than females. These baseline results provide a detailed insight into the changes in the structure of the pubic symphysis with ageing and sexually dimorphic features associated with the cortical and trabecular bone profiles.

Size dependent photodegradation of CdS particles deposited onto TiO2 mesoporous films by SILAR method

The properties of CdS nanoparticles incorporated onto mesoporous TiO2 films by a successive ionic layer adsorption and reaction (SILAR) method were investigated by Raman spectroscopy, UV-visible spectroscopy, transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). High resolution TEM indicated that the synthesized CdS particles were hexagonal phase and the particle sizes were less than 5 nm when SILAR cycles were fewer than 9. Quantum size effect was found with the CdS sensitized TiO2 films prepared with up to 9 SILAR cycles. The band gap of CdS nanoparticles decreased from 2.65 eV to 2.37 eV with the increase of the SILAR cycles from 1 to 11. The investigation of the stability of the CdS/TiO2 films in air under illumination (440.6 µW/cm2) showed that the photodegradation rate was up to 85% per day for the sample prepared with 3 SILAR cycles. XPS analysis indicated that the photodegradation was due to the oxidation of CdS, leading to the transformation from sulphide to sulphate (CdSO4). Furthermore, the degradation rate was strongly dependent upon the particle size of CdS. Smaller particles showed faster degradation rate. The size-dependent photo-induced oxidization was rationalized with the variation of size-dependent distribution of surface atoms of CdS particles. Molecular Dynamics (MD) simulation has indicated that the surface sulphide anion of a large CdS particle such as CdS made with 11 cycles (CdS11, particle size = 5.6 nm) accounts for 9.6% of the material whereas this value is increased to 19.2% for (CdS3) based smaller particles (particle size: 2.7 nm). Nevertheless, CdS nanoparticles coated with ZnS material showed a significantly enhanced stability under illumination in air. A nearly 100% protection of CdS from photon induced oxidation with a ZnS coating layer prepared using four SILAR cycles, suggesting the formation of a nearly complete coating layer on the CdS nanoparticles.

Developing affordable and sustainable housing through energy, transport, and building utility integration

Housing affordability and sustainable development are not polarised ideologies as both are necessary with increasing urbanisation. We must bridge the gap between current median house pricing and target affordable house pricing whilst pursuing sustainability. This paper examines the potential of initial construction cost and ongoing utilities and transport cost reduction through the integration of sustainable housing design and transit oriented development principles in a Commuter Energy and Building Utilities System (CEBUS). It also introduces current research on the development of a Dynamic Simulation Model for CEBUS applications in the Australian property development and construction industry.

Prevalence, predictors, and correlates of supportive care needs among women 3–5 years after a diagnosis of endometrial cancer

Purpose The purpose of this study is to examine the prevalence, sociodemographic and clinical predictors, and physical and psychosocial correlates of unmet needs among women 3–5 years following treatment for endometrial cancer. Methods Women with endometrial cancer completed a survey around the time of diagnosis and again 3–5 years later. The follow-up survey asked women about their physical and psychosocial functioning and supportive care needs (CaSUN). Multivariable-adjusted logistic regression identified the predictors and correlates of women’s unmet needs 3–5 years after diagnosis. Results Of the 629 women who completed the cancer survivors’ unmet needs measure (CaSUN), 24 % (n = 153) women reported one or more unmet supportive care needs in the last month. Unmet needs at 3–5 years post-diagnosis were predicted by younger age (OR = 4.47; 95 % CI: 2.09–9.56) and advanced disease stage at diagnosis (OR = 2.47; 95 % CI: 1.38–4.45) and correlated with greater cancer symptoms (OR = 1.78; 95 % CI: 1.05–3.02), lower limb swelling (OR = 2.50; 95 % CI: 1.51–4.15), symptoms of anxiety (OR = 2.21; 95 % CI: 1.31–3.72), and less availability of social support (OR = 3.42; 95 % CI: 1.92–6.11). Women with a history of comorbidities (OR = 0.47; 95 % CI: 0.27–0.82) and those living in a rural area at the time of diagnosis (OR = 0.56; 95 % CI: 0.34–0.92) were less likely to report unmet needs. Conclusions Sociodemographic, health, and psychosocial factors seem important for identifying women who will or will not have unmet needs several years following endometrial cancer. Longitudinal assessments of people’s needs over the course of their cancer trajectory may be an effective way to identify areas that should receive further attention by health providers.

Adolescent peer aggression and its association with mental health and substance use in an Australian cohort

Prospective longitudinal birth cohort data was used to examine the association between peer aggression at 14 years and mental health and substance use at 17 years. A sample of 1590 participants from the Western Australian Pregnancy Cohort (Raine) study were divided into mutually exclusive categories (victims, perpetrators, victim-perpetrators and uninvolved). Involvement in any type of peer aggression as a victim (10.1%), perpetrator (21.4%), or a victim-perpetrator (8.7%) was reported by 40.2% of participants. After adjusting for confounding factors, those who were a victim of peer aggression had increased odds of later depression and internalising symptoms whilst perpetrators of peer aggression were found to be at increased risk of depression and harmful alcohol use. Victim-perpetrators of peer aggression were more likely to have externalising behaviours at 17 years. These results show an independent temporal relationship between peer aggression and later mental health and substance use problems in adolescence.

Parents’ perception of their children’s participation in physical activity

This paper describes parents' survey and interview responses about their children's participation in physical activity which were collected for the second part of a three phase project funded by the Commonwealth Department of Health and Family Services: Health Advancement Project through the auspices of ACHPER. In the first phase of the project, an extensive data base was compiled on children's participation in physical activity; the second phase investigated parents' and teachers' perceptions of their children's and students' participation in physical activity. The third phase, which is now underway, will use the first two phases to develop a set of resources with which to advocate for policy, programs and educational strategies to serve the needs of young people in Australia most effectively in relation to physical activity.

A longitudinal study of employee adaptation to organizational change: The role of change-related information and change-related self-efficacy

This study examined the role of information, efficacy, and 3 stressors in predicting adjustment to organizational change. Participants were 589 government employees undergoing an 18-month process of regionalization. To examine if the predictor variables had long-term effects on adjustment, the authors assessed psychological well-being, client engagement, and job satisfaction again at a 2-year follow-up. At Time 1, there was evidence to suggest that information was indirectly related to psychological well-being, client engagement, and job satisfaction, via its positive relationship to efficacy. There also was evidence to suggest that efficacy was related to reduced stress appraisals, thereby heightening client engagement. Last, there was consistent support for the stress-buffering role of Time 1 self-efficacy in the prediction of Time 2 job satisfaction.

A novel 15N tracer approach for the quantification of N2 and N2O emissions from soil incubations in a completely automated laboratory set up

The microbial mediated production of nitrous oxide (N2O) and its reduction to dinitrogen (N2) via denitrification represents a loss of nitrogen (N) from fertilised agro-ecosystems to the atmosphere. Although denitrification has received great interest by biogeochemists in the last decades, the magnitude of N2lossesand related N2:N2O ratios from soils still are largely unknown due to methodical constraints. We present a novel 15N tracer approach, based on a previous developed tracer method to study denitrification in pure bacterial cultures which was modified for the use on soil incubations in a completely automated laboratory set up. The method uses a background air in the incubation vessels that is replaced with a helium-oxygen gas mixture with a 50-fold reduced N2 background (2 % v/v). This method allows for a direct and sensitive quantification of the N2 and N2O emissions from the soil with isotope-ratio mass spectrometry after 15N labelling of denitrification N substrates and minimises the sensitivity to the intrusion of atmospheric N2 at the same time. The incubation set up was used to determine the influence of different soil moisture levels on N2 and N2O emissions from a sub-tropical pasture soil in Queensland/Australia. The soil was labelled with an equivalent of 50 μg-N per gram dry soil by broadcast application of KNO3solution (4 at.% 15N) and incubated for 3 days at 80% and 100% water filled pore space (WFPS), respectively. The headspace of the incubation vessel was sampled automatically over 12hrs each day and 3 samples (0, 6, and 12 hrs after incubation start) of headspace gas analysed for N2 and N2O with an isotope-ratio mass spectrometer (DELTA V Plus, Thermo Fisher Scientific, Bremen, Germany(. In addition, the soil was analysed for 15N NO3- and NH4+ using the 15N diffusion method, which enabled us to obtain a complete N balance. The method proved to be highly sensitive for N2 and N2O emissions detecting N2O emissions ranging from 20 to 627 μN kg-1soil-1hr-1and N2 emissions ranging from 4.2 to 43 μN kg-1soil-1hr-1for the different treatments. The main end-product of denitrification was N2O for both water contents with N2 accounting for 9% and 13% of the total denitrification losses at 80% and 100%WFPS, respectively. Between 95-100% of the added 15N fertiliser could be recovered. Gross nitrification over the 3 days amounted to 8.6 μN g-1 soil-1 and 4.7 μN g-1 soil-1, denitrification to 4.1 μN g-1 soil-1 and 11.8 μN g-1 soil-1at 80% and 100%WFPS, respectively. The results confirm that the tested method allows for a direct and highly sensitive detection of N2 and N2O fluxes from soils and hence offers a sensitive tool to study denitrification and N turnover in terrestrial agro-ecosystems.

Owning omega-3: Monsanto and the invention of meat

In August of 2010, Anna Salleh of the Science Unit of the Australian Broadcasting Corporation broke a story about Monsanto seeking to patent the enhancement of meat, including omega-3 fatty acids: ‘Enhanced port is sparking debate over the ethics of placing patents on food. Patent applications covering the enhancement of meat, including pork with omega-3 fatty acids, are stimulating debate over the ethics and legalities of claiming intellectual property over food. Monsanto has filed patents that cover the feeding of animals soybeans, which have been genetically modified by the company to contain stearidonic acid (SDA), a plant-derived omega-3 fatty acid... Omega-3s have been linked to improved cardiovascular health and there are many companies engineering them into foodstuffs. But the new patent applications have touched a raw nerve among those who see them as an attempt by the company to exert control over the food chain.’ This article providers a critical evaluation of the controversy of Monsanto’s patent applications, and the larger issues over patenting food. It first considers the patent portfolio of Monsanto; the nature of the patent claims; and the examination of the claims by patent examiners. Second, it examines the withdrawal and revision of the patent claims by Monsanto in the wake of criticism by patent authorities and the public disquiet over the controversial application. Third, this article considers the larger policy issues raised by Monsanto’s patent applications – including the patenting of plants, animals, and foodstuffs. There is also a consideration of the impact of patents upon the administration of health-care, competition, and research.