Subjective blur limits for higher order aberrations

Purpose: We compared subjective blur limits for defocus and the higher-order aberrations of coma, trefoil, and spherical aberration. ---------- Methods: Spherical aberration was presented in both Zernike and Seidel forms. Black letter targets (0.1, 0.35, and 0.6 logMAR) on white backgrounds were blurred using an adaptive optics system for six subjects under cycloplegia with 5 mm artificial pupils. Three blur criteria of just noticeable, just troublesome, and just objectionable were used.---------- Results: When expressed as wave aberration coefficients, the just noticeable blur limits for coma and trefoil were similar to those for defocus, whereas the just noticeable limits for Zernike spherical aberration and Seidel spherical aberration (the latter given as an “rms equivalent”) were considerably smaller and larger, respectively, than defocus limits.---------- Conclusions: Blur limits increased more quickly for the higher order aberrations than for defocus as the criterion changed from just noticeable to just troublesome and then to just objectionable.

The feasibility of vibration analysis as a technique to detect osseointegration of transfemoral implants

One of the main causes of above knee or transfemoral amputation (TFA) in the developed world is trauma to the limb. The number of people undergoing TFA due to limb trauma, particularly due to war injuries, has been increasing. Typically the trauma amputee population, including war-related amputees, are otherwise healthy, active and desire to return to employment and their usual lifestyle. Consequently there is a growing need to restore long-term mobility and limb function to this population. Traditionally transfemoral amputees are provided with an artificial or prosthetic leg that consists of a fabricated socket, knee joint mechanism and a prosthetic foot. Amputees have reported several problems related to the socket of their prosthetic limb. These include pain in the residual limb, poor socket fit, discomfort and poor mobility. Removing the socket from the prosthetic limb could eliminate or reduce these problems. A solution to this is the direct attachment of the prosthesis to the residual bone (femur) inside the residual limb. This technique has been used on a small population of transfemoral amputees since 1990. A threaded titanium implant is screwed in to the shaft of the femur and a second component connects between the implant and the prosthesis. A period of time is required to allow the implant to become fully attached to the bone, called osseointegration (OI), and be able to withstand applied load; then the prosthesis can be attached. The advantages of transfemoral osseointegration (TFOI) over conventional prosthetic sockets include better hip mobility, sitting comfort and prosthetic retention and fewer skin problems on the residual limb. However, due to the length of time required for OI to progress and to complete the rehabilitation exercises, it can take up to twelve months after implant insertion for an amputee to be able to load bear and to walk unaided. The long rehabilitation time is a significant disadvantage of TFOI and may be impeding the wider adoption of the technique. There is a need for a non-invasive method of assessing the degree of osseointegration between the bone and the implant. If such a method was capable of determining the progression of TFOI and assessing when the implant was able to withstand physiological load it could reduce the overall rehabilitation time. Vibration analysis has been suggested as a potential technique: it is a non destructive method of assessing the dynamic properties of a structure. Changes in the physical properties of a structure can be identified from changes in its dynamic properties. Consequently vibration analysis, both experimental and computational, has been used to assess bone fracture healing, prosthetic hip loosening and dental implant OI with varying degrees of success. More recently experimental vibration analysis has been used in TFOI. However further work is needed to assess the potential of the technique and fully characterise the femur-implant system. The overall aim of this study was to develop physical and computational models of the TFOI femur-implant system and use these models to investigate the feasibility of vibration analysis to detect the process of OI. Femur-implant physical models were developed and manufactured using synthetic materials to represent four key stages of OI development (identified from a physiological model), simulated using different interface conditions between the implant and femur. Experimental vibration analysis (modal analysis) was then conducted using the physical models. The femur-implant models, representing stage one to stage four of OI development, were excited and the modal parameters obtained over the range 0-5kHz. The results indicated the technique had limited capability in distinguishing between different interface conditions. The fundamental bending mode did not alter with interfacial changes. However higher modes were able to track chronological changes in interface condition by the change in natural frequency, although no one modal parameter could uniquely distinguish between each interface condition. The importance of the model boundary condition (how the model is constrained) was the key finding; variations in the boundary condition altered the modal parameters obtained. Therefore the boundary conditions need to be held constant between tests in order for the detected modal parameter changes to be attributed to interface condition changes. A three dimensional Finite Element (FE) model of the femur-implant model was then developed and used to explore the sensitivity of the modal parameters to more subtle interfacial and boundary condition changes. The FE model was created using the synthetic femur geometry and an approximation of the implant geometry. The natural frequencies of the FE model were found to match the experimental frequencies within 20% and the FE and experimental mode shapes were similar. Therefore the FE model was shown to successfully capture the dynamic response of the physical system. As was found with the experimental modal analysis, the fundamental bending mode of the FE model did not alter due to changes in interface elastic modulus. Axial and torsional modes were identified by the FE model that were not detected experimentally; the torsional mode exhibited the largest frequency change due to interfacial changes (103% between the lower and upper limits of the interface modulus range). Therefore the FE model provided additional information on the dynamic response of the system and was complementary to the experimental model. The small changes in natural frequency over a large range of interface region elastic moduli indicated the method may only be able to distinguish between early and late OI progression. The boundary conditions applied to the FE model influenced the modal parameters to a far greater extent than the interface condition variations. Therefore the FE model, as well as the experimental modal analysis, indicated that the boundary conditions need to be held constant between tests in order for the detected changes in modal parameters to be attributed to interface condition changes alone. The results of this study suggest that in a clinical setting it is unlikely that the in vivo boundary conditions of the amputated femur could be adequately controlled or replicated over time and consequently it is unlikely that any longitudinal change in frequency detected by the modal analysis technique could be attributed exclusively to changes at the femur-implant interface. Therefore further development of the modal analysis technique would require significant consideration of the clinical boundary conditions and investigation of modes other than the bending modes.

The conversion of lignocellulosics to levulinic acid

Biomass represents an abundant and relatively low cost carbon resource that can be utilized to produce platform chemicals such as levulinic acid. Current processing technology limits the cost-effective production of levulinic acid in commercial quantities from biomass. The key to improving the yield and effi ciency of levulinic acid production from biomass lies in the ability to optimize and isolate the intermediate products at each step of the reaction pathway and reduce re-polymerization and side reactions. New technologies (including the use of microwave irradiation and ionic liquids) and the development of highly selective catalysts would provide the necessary step change for the optimization of key reactions. A processing environment that allows the use of biphasic systems and/or continuous extraction of products would increase reaction rates, yields and product quality. This review outlines the chemistry of levulinic acid synthesis and discusses current and potential technologies for producing levulinic acid from lignocellulosics.

Calibration and operational analysis of variable speed limits for high flow condition

Variable Speed Limits (VSL) is a control tool of Intelligent Transportation Systems (ITS) which can enhance traffic safety and which has the potential to contribute to traffic efficiency. This study presents the results of a calibration and operational analysis of a candidate VSL algorithm for high flow conditions on an urban motorway of Queensland, Australia. The analysis was done using a framework consisting of a microscopic simulation model combined with runtime API and a proposed efficiency index. The operational analysis includes impacts on speed-flow curve, travel time, speed deviation, fuel consumption and emission.

The requirement to 'Start a Proceeding' to prevent the lapse of a caveat

Section 126 of the Land Title Act 1994 (Qld) regulates whether, and if so, when a caveat will lapse. While certain caveats will not lapse due to the operation of s 126(1), if a caveator does not wish a caveat to which the section applies to lapse, the caveator must start a proceeding in a court of competent jurisdiction to establish the interest claimed under the caveat within the time limits specified in, and otherwise comply with the obligations imposed by, s 126(4). The requirement, in s 126(4), to “start a proceeding” was the subject of judicial examination by the Court of Appeal (McMurdo P, Holmes JA and MacKenzie J) in Cousins Securities Pty Ltd v CEC Group Ltd [2007] QCA 192.

Adding a receding horizon to Locally Weighted Regression for learning robot control

There have been notable advances in learning to control complex robotic systems using methods such as Locally Weighted Regression (LWR). In this paper we explore some potential limits of LWR for robotic applications, particularly investigating its application to systems with a long horizon of temporal dependence. We define the horizon of temporal dependence as the delay from a control input to a desired change in output. LWR alone cannot be used in a temporally dependent system to find meaningful control values from only the current state variables and output, as the relationship between the input and the current state is under-constrained. By introducing a receding horizon of the future output states of the system, we show that sufficient constraint is applied to learn good solutions through LWR. The new method, Receding Horizon Locally Weighted Regression (RH-LWR), is demonstrated through one-shot learning on a real Series Elastic Actuator controlling a pendulum.

Queue protection parameters’ fine-tuning for variable speed limits

Any incident on motorways potentially can be followed by secondary crashes. Rear-end crashes also could happen as a result of queue formation downstream of high speed platoons. To decrease the occurrence of secondary crashes and rear-end crashes, Variable Speed Limits (VSL) can be applied to protect queue formed downstream. This paper focuses on fine tuning the Queue Protection algorithm of VSL. Three performance indicators: activation time, deactivation time and number of false alarms are selected to optimise the Queue Protection algorithm. A calibrated microscopic traffic simulation model of Pacific Motorway in Brisbane is used for the optimisation. Performance of VSL during an incident and heavy congestion and the benefit of VSL will be presented in the paper.

The limits of competition : reasserting a role for consumer protection and fair trading regulation in competitive markets

In this paper we advocate for the continued need for consumer protection and fair trading regulation, even in competitive markets. For the purposes of this paper a ‘competitive market’ is defined as one that has low barriers to entry and exit, with homogenous products and services and numerous suppliers. Whilst competition is an important tool for providing consumer benefits, it will not be sufficient to protect at least some consumers, particularly vulnerable, low income consumers. For this reason, we argue, setting competition as the ‘end goal’ and assuming that consumer protection and consumer benefits will always follow, is a flawed regulatory approach. The ‘end goal’ should surely be consumer protection and fair markets, and a combination of competition law and consumer protection law should be applied in order to achieve those goals.

Variable Speed Limits : conceptual design for Queensland practice

Variable Speed Limits (VSL) is an Intelligent Transportation Systems (ITS) control tool which can enhance traffic safety and which has the potential to contribute to traffic efficiency. Queensland's motorways experience a large volume of commuter traffic in peak periods, leading to heavy recurrent congestion and a high frequency of incidents. Consequently, Queensland's Department of Transport and Main Roads have considered deploying VSL to improve safety and efficiency. This paper identifies three types of VSL and three applicable conditions for activating VSL on for Queensland motorways: high flow, queuing and adverse weather. The design objectives and methodology for each condition are analysed, and micro-simulation results are presented to demonstrate the effectiveness of VSL.

Defences in medical negligence : to what extent has tort law reform in Australia limited the liability of health professionals?

Tort law reform has resulted in legislation being passed by all Australian jurisdictions in the past decade implementing the recommendations contained in the Ipp Report. The report was in response to a perceived crisis in medical indemnity insurance. The objective was to restrict and limit liability in negligence actions. This paper will consider to what extent the reforms have impacted on the liability of health professionals in medical negligence actions. The reversal of the onus of proof through the obvious risk sections has attempted to extend the scope of the defence of voluntary assumption of risk. There is no liability for the materialisation of an inherent risk. Presumptions and mandatory reductions for contributory negligence have attempted to reduce the liability of defendants. It is now possible for reductions of 100% for contributory negligence. Apologies can be made with no admission of legal liability to encourage them being made and thereby reduce the number of actions being commenced. The peer acceptance defence has been introduced and enacted by legislation. There is protection for good samaritans even though the Ipp Report recommended against such protection. Limitation periods have been amended. Provisions relating to mental harm have been introduced re-instating the requirement of normal fortitude and direct perception. After an analysis of the legislation, it will be argued in this paper that while there has been some limitation and restriction, courts have generally interpreted the civil liability reforms in compliance with the common law. It has been the impact of statutory limits on the assessment of damages which has limited the liability of health professionals in medical negligence actions.

The acute adaptations of normal and pathological human Achilles tendons to eccentric and concentric exercise

Eccentric exercise is the conservative treatment of choice for mid-portion Achilles tendinopathy. While there is a growing body of evidence supporting the medium to long term efficacy of eccentric exercise in Achilles tendinopathy treatment, very few studies have investigated the short term response of the tendon to eccentric exercise. Moreover, the mechanisms through which tendinopathy symptom resolution occurs remain to be established. The primary purpose of this thesis was to investigate the acute adaptations of the Achilles tendon to, and the biomechanical characteristics of, the eccentric exercise protocol used for Achilles tendinopathy rehabilitation and a concentric equivalent. The research was conducted with an orientation towards exploring potential mechanisms through which eccentric exercise may bring about a resolution of tendinopathy symptoms. Specifically, the morphology of tendinopathic and normal Achilles tendons was monitored using high resolution sonography prior to and following eccentric and concentric exercise, to facilitate comparison between the treatment of choice and a similar alternative. To date, the only proposed mechanism through which eccentric exercise is thought to result in symptom resolution is the increased variability in motor output force observed during eccentric exercise. This thesis expanded upon prior work by investigating the variability in motor output force recorded during eccentric and concentric exercises, when performed at two different knee joint angles, by limbs with and without symptomatic tendinopathy. The methodological phase of the research focused on establishing the reliability of measures of tendon thickness, tendon echogenicity, electromyography (EMG) of the Triceps Surae and the standard deviation (SD) and power spectral density (PSD) of the vertical ground reaction force (VGRF). These analyses facilitated comparison between the error in the measurements and experimental differences identified as statistically significant, so that the importance and meaning of the experimental differences could be established. One potential limitation of monitoring the morphological response of the Achilles tendon to exercise loading is that the Achilles tendon is continually exposed to additional loading as participants complete the walking required to carry out their necessary daily tasks. The specific purpose of the last experiment in the methodological phase was to evaluate the effect of incidental walking activity on Achilles tendon morphology. The results of this study indicated that walking activity could decrease Achilles tendon thickness (negative diametral strain) and that the decrease in thickness was dependent on both the amount of walking completed and the proximity of walking activity to the sonographic examination. Thus, incidental walking activity was identified as a potentially confounding factor for future experiments which endeavoured to monitor changes in tendon thickness with exercise loading. In the experimental phase of this thesis the thickness of Achilles tendons was monitored prior to and following isolated eccentric and concentric exercise. The initial pilot study demonstrated that eccentric exercise resulted in a greater acute decrease in Achilles tendon thickness (greater diametral strain) compared to an equivalent concentric exercise, in participants with no history of Achilles tendon pain. This experiment was then expanded to incorporate participants with unilateral Achilles tendinopathy. The major finding of this experiment was that the acute decrease in Achilles tendon thickness observed following eccentric exercise was modified by the presence of tendinopathy, with a smaller decrease (less diametral strain) noted for tendinopathic compared to healthy control tendon. Based on in vitro evidence a decrease in tendon thickness is believed to reflect extrusion of fluid from the tendon with loading. This process would appear to be limited by the presence of pathology and is hypothesised to be a result of the changes in tendon structure associated with tendinopathy. Load induced fluid movement may be important to the maintenance of tendon homeostasis and structure as it has the potential to enhance molecular movement and stimulate tendon remodelling. On this basis eccentric exercise may be more beneficial to the tendon than concentric exercise. Finally, EMG and motor output force variability (SD and PSD of VGRF) were investigated while participants with and without tendinopathy performed the eccentric and concentric exercises. Although between condition differences were identified as statistically significant for a number of force variability parameters, the differences were not greater than the limits of agreement for repeated measures. Consequently the meaning and importance of these findings were questioned. Interestingly, the EMG amplitude of all three Triceps Surae muscles did not vary with knee joint angle during the performance of eccentric exercise. This raises questions pertaining to the functional importance of performing the eccentric exercise protocol at each of the two knee joint angles as it is currently prescribed. EMG amplitude was significantly greater during concentric compared to eccentric muscle actions. Differences in the muscle activation patterns may result in different stress distributions within the tendon and be related to the different diametral strain responses observed for eccentric and concentric muscle actions.

Defences in medical negligence : to what extent has tort law reform in Australia limited the liability of health professionals?

Tort law reform has resulted in legislation being passed by all Australian jurisdictions in the past decade implementing the recommendations contained in the Ipp Report. The report was in response to a perceived crisis in medical indemnity insurance. The objective was to restrict and limit liability in negligence actions. This paper will consider to what extent the reforms have impacted on the liability of health professionals in medical negligence actions. After an analysis of the legislation, it will be argued in this paper that while there has been some limitation and restriction, courts have generally interpreted the civil liability reforms in compliance with the common law. It has been the impact of statutory limits on the assessment of damages through thresholds and caps which has limited the liability of health professionals in medical negligence actions.

Identifying the extent, motivations and barriers to outsourcing of accounting services.

In this paper we analyse the oursourcing of accounting services. The extent to which firms are currently outsourcing, or considering outsourcing such services, and the motivations and barriers associated with outsourcing are identified. Empirical data from a random sample of accounting firms are used in this analysis. Data indicate that the majority of accounting firms are either currently outsourcing or considering outsourcing and that they exopect the volume of oursourced services to increase. In contrast to the scholarly literature advocating labor arbitrage as the primary driver for organizations choosing to outsource, in this study it was found that the main factors underpinning the decision to outsource were the expediting of service delivary to clients, and to enable the firm to focus on its core competencies.

A comparison of the psychological, social, and legal factors contributing to speeding and drink driving behaviour

Within Australia, motor vehicle injury is the leading cause of hospital admissions and fatalities. Road crash data reveals that among the factors contributing to crashes in Queensland, speed and alcohol continue to be overrepresented. While alcohol is the number one contributing factor to fatal crashes, speeding also contributes to a high proportion of crashes. Research indicates that risky driving is an important contributor to road crashes. However, it has been debated whether all risky driving behaviours are similar enough to be explained by the same combination of factors. Further, road safety authorities have traditionally relied upon deterrence based countermeasures to reduce the incidence of illegal driving behaviours such as speeding and drink driving. However, more recent research has focussed on social factors to explain illegal driving behaviours. The purpose of this research was to examine and compare the psychological, legal, and social factors contributing to two illegal driving behaviours: exceeding the posted speed limit and driving when over the legal blood alcohol concentration (BAC) for the drivers licence type. Complementary theoretical perspectives were chosen to comprehensively examine these two behaviours including Akers’ social learning theory, Stafford and Warr’s expanded deterrence theory, and personality perspectives encompassing alcohol misuse, sensation seeking, and Type-A behaviour pattern. The program of research consisted of two phases: a preliminary pilot study, and the main quantitative phase. The preliminary pilot study was undertaken to inform the development of the quantitative study and to ensure the clarity of the theoretical constructs operationalised in this research. Semi-structured interviews were conducted with 11 Queensland drivers recruited from Queensland Transport Licensing Centres and Queensland University of Technology (QUT). These interviews demonstrated that the majority of participants had engaged in at least one of the behaviours, or knew of someone who had. It was also found among these drivers that the social environment in which both behaviours operated, including family and friends, and the social rewards and punishments associated with the behaviours, are important in their decision making. The main quantitative phase of the research involved a cross-sectional survey of 547 Queensland licensed drivers. The aim of this study was to determine the relationship between speeding and drink driving and whether there were any similarities or differences in the factors that contribute to a driver’s decision to engage in one or the other. A comparison of the participants self-reported speeding and self-reported drink driving behaviour demonstrated that there was a weak positive association between these two behaviours. Further, participants reported engaging in more frequent speeding at both low (i.e., up to 10 kilometres per hour) and high (i.e., 10 kilometres per hour or more) levels, than engaging in drink driving behaviour. It was noted that those who indicated they drove when they may be over the legal limit for their licence type, more frequently exceeded the posted speed limit by 10 kilometres per hour or more than those who complied with the regulatory limits for drink driving. A series of regression analyses were conducted to investigate the factors that predict self-reported speeding, self-reported drink driving, and the preparedness to engage in both behaviours. In relation to self-reported speeding (n = 465), it was found that among the sociodemographic and person-related factors, younger drivers and those who score high on measures of sensation seeking were more likely to report exceeding the posted speed limit. In addition, among the legal and psychosocial factors it was observed that direct exposure to punishment (i.e., being detected by police), direct punishment avoidance (i.e., engaging in an illegal driving behaviour and not being detected by police), personal definitions (i.e., personal orientation or attitudes toward the behaviour), both the normative and behavioural dimensions of differential association (i.e., refers to both the orientation or attitude of their friends and family, as well as the behaviour of these individuals), and anticipated punishments were significant predictors of self-reported speeding. It was interesting to note that associating with significant others who held unfavourable definitions towards speeding (the normative dimension of differential association) and anticipating punishments from others were both significant predictors of a reduction in self-reported speeding. In relation to self-reported drink driving (n = 462), a logistic regression analysis indicated that there were a number of significant predictors which increased the likelihood of whether participants had driven in the last six months when they thought they may have been over the legal alcohol limit. These included: experiences of direct punishment avoidance; having a family member convicted of drink driving; higher levels of Type-A behaviour pattern; greater alcohol misuse (as measured by the AUDIT); and the normative dimension of differential association (i.e., associating with others who held favourable attitudes to drink driving). A final logistic regression analysis examined the predictors of whether the participants reported engaging in both drink driving and speeding versus those who reported engaging in only speeding (the more common of the two behaviours) (n = 465). It was found that experiences of punishment avoidance for speeding decreased the likelihood of engaging in both speeding and drink driving; whereas in the case of drink driving, direct punishment avoidance increased the likelihood of engaging in both behaviours. It was also noted that holding favourable personal definitions toward speeding and drink driving, as well as higher levels of on Type-A behaviour pattern, and greater alcohol misuse significantly increased the likelihood of engaging in both speeding and drink driving. This research has demonstrated that the compliance with the regulatory limits was much higher for drink driving than it was for speeding. It is acknowledged that while speed limits are a fundamental component of speed management practices in Australia, the countermeasures applied to both speeding and drink driving do not appear to elicit the same level of compliance across the driving population. Further, the findings suggest that while the principles underpinning the current regime of deterrence based countermeasures are sound, current enforcement practices are insufficient to force compliance among the driving population, particularly in the case of speeding. Future research should further examine the degree of overlap between speeding and drink driving behaviour and whether punishment avoidance experiences for a specific illegal driving behaviour serve to undermine the deterrent effect of countermeasures aimed at reducing the incidence of another illegal driving behaviour. Furthermore, future work should seek to understand the factors which predict engaging in speeding and drink driving behaviours at the same time. Speeding has shown itself to be a pervasive and persistent behaviour, hence it would be useful to examine why road safety authorities have been successful in convincing the majority of drivers of the dangers of drink driving, but not those associated with speeding. In conclusion, the challenge for road safety practitioners will be to convince drivers that speeding and drink driving are equally risky behaviours, with the ultimate goal to reduce the prevalence of both behaviours.

Investigation to enhance high speed rail accessibility

High Speed Rail (HSR) is rapidly gaining popularity worldwide as a safe and efficient transport option for long-distance travel. Designed to win market shares from air transport, HSR systems optimise their productivity between increasing speeds and station spacing to offer high quality service and gain ridership. Recent studies have investigated the effects that the deployment of HSR infrastructure has on spatial distribution and the economic development of cities and regions. Findings appear mostly positive at higher geographical scales, where HSR links connect major urban centres several hundred kilometres apart and already well positioned within a national or international context. Also, at the urban level, studies have shown regeneration and concentration effects around HSR station areas with positive returns on city’s image and economy. However, doubts persist on the effects of HSR at an intermediate scale, where the accessibility trade off on station spacing limits access to many small and medium agglomerations. Thereby, their ability to participate in the development opportunities facilitated by HSR infrastructure is significantly reduced. The locational advantages deriving from transport improvements appear contrasting especially in regions that tend to have a polycentric structure, where cities may present greater accessibility disparities between those served by HSR and those left behind. This thesis fits in this context where intermediate and regional cities do not directly enjoy the presence of an HSR station while having an existing or planned proximate HSR corridor. With the aim of understanding whether there might be a solution to this apparent incongruity, the research investigates strategies to integrate HSR accessibility at the regional level. While current literature recommends to commit with ancillary investments to the uplift of station areas and the renewal of feeder systems, I hypothesised the interoperability between the HSR and the conventional networks to explore the possibilities offered by mixed traffic and infrastructure sharing. Thus, I developed a methodology to quantify the exchange of benefits deriving from this synergistic interaction. In this way, it was possible to understand which level of service quality offered by alternative transit strategies best facilitates the distribution of accessibility benefits for areas far from actual HSR stations. Therefore, strategies were selected for their type of service capable of regional extensions and urban penetrations, while incorporating a combination of specific advantages (e.g. speed, sub-urbanity, capacity, frequency and automation) in order to emulate HSR quality with increasingly efficient services. The North-eastern Italian macro region was selected as case study to ground the research offering concurrently a peripheral polycentric metropolitan form, the presence of a planned HSR corridor with some portions of HSR infrastructure implementation, and the project to develop a suburban rail service extended regionally. Results show significant distributive potential, in terms of network effects produced in relation with HSR, in increasing proportions for all the strategies considered: a regional metro rail strategy (abbreviated RMR), a regional high speed rail strategy (abbreviated RHSR), a regional light rail transit (abbreviated LRT) strategy, and a non-stopping continuous railway system (abbreviated CRS) strategy. The provision of additional tools to value HSR infrastructure against its accessibility benefits and their regional distribution through alternative strategies beyond the actual HSR stations, would have great implications, both politically and technically, in moving towards new dimensions of HSR evaluation and development.