Low cost railway level crossings

The Cooperative Research Centre (CRC) for Rail Innovation is conducting a tranche of industry-led research projects looking into safer rail level crossings. This paper will provide an overview of the Affordable Level Crossings project, a project that is performing research in both engineering and human factors aspects of low-cost level crossing warning devices (LCLCWDs), and is facilitating a comparative trial of these devices over a period of 12 months in several jurisdictions. Low-cost level crossing warning devices (LCLCWDs) are characterised by the use of alternative technologies for high cost components including train detection and connectivity (e.g. radar, acoustic, magnetic induction train detection systems and wireless connectivity replacing traditional track circuits and wiring). These devices often make use of solar power where mains power is not available, and aim to make substantial savings in lifecycle costs. The project involves trialling low-cost level crossing warning devices in shadow-mode, where devices are installed without the road-user interface at a number of existing level crossing sites that are already equipped with conventional active warning systems. It may be possible that the deployment of lower-cost devices can provide a significantly larger safety benefit over the network than a deployment of expensive conventional devices, as the lower cost would allow more passive level crossing sites to be upgraded with the same capital investment. The project will investigate reliability and safety integrity issues of the low-cost devices, as well as evaluate lifecycle costs and investigate human factors issues related to warning reliability. This paper will focus on the requirements and safety issues of LCLCWDs, and will provide an overview of the Rail CRC projects.

Traffic harmony in China? Investigating driver perceptions of traffic law enforcement and social responsibility for harmonious road use.

Social harmony can manifest in many ways. In rapidly motorizing countries like China, a growing area of potential disharmony is road use. The increased ability to purchase a car for the first time and a subsequent increase in new drivers has seen several Chinese cities take unprecedented measures to manage congestion. There is a corresponding need to ensure effective traffic law enforcement in promoting a safe environment for all road users. This paper reports qualitative research conducted with Beijing car drivers to investigate perceptions of unsafe road use, penalties for traffic violations, and improvements for the current system. Overall, the findings suggest awareness among drivers of many of the key risk factors. A perceived lack of clarity in how penalties are determined was identified and drivers in-dicated a desire to know how revenue from traffic fines is used. Several suggestions for improving the current system included school/community education about road risks and traffic law. The rise of private car ownership in China may contribute to a more harmonious personal life, but at the same time, may contribute to a decrease in societal harmony. A major challenge for authorities in any country is to promote the idea of a collective responsibility for road safety (traffic harmony), especially to those who perceive that traffic rules do not apply to them. This is a potentially greater challenge for China as it strives to balance harmony on the road and harmony in the broader society.

Fatalism, superstition, religion, and culture : road user beliefs and behaviour in Pakistan

Road traffic crashes have emerged as a major health problem around the world. Road crash fatalities and injuries have been reduced significantly in developed countries, but they are still an issue in low and middle-income countries. The World Health Organization (WHO, 2009) estimates that the death toll from road crashes in low- and middle-income nations is more than 1 million people per year, or about 90% of the global road toll, even though these countries only account for 48% of the world's vehicles. Furthermore, it is estimated that approximately 265,000 people die every year in road crashes in South Asian countries and Pakistan stands out with 41,494 approximately deaths per year. Pakistan has the highest rate of fatalities per 100,000 population in the region and its road crash fatality rate of 25.3 per 100,000 population is more than three times that of Australia's. High numbers of road crashes not only cause pain and suffering to the population at large, but are also a serious drain on the country's economy, which Pakistan can ill-afford. Most studies identify human factors as the main set of contributing factors to road crashes, well ahead of road environment and vehicle factors. In developing countries especially, attention and resources are required in order to improve things such as vehicle roadworthiness and poor road infrastructure. However, attention to human factors is also critical. Human factors which contribute to crashes include high risk behaviours like speeding and drink driving, and neglect of protective behaviours such as helmet wearing and seat belt wearing. Much research has been devoted to the attitudes, beliefs and perceptions which contribute to these behaviours and omissions, in order to develop interventions aimed at increasing safer road use behaviours and thereby reducing crashes. However, less progress has been made in addressing human factors contributing to crashes in developing countries as compared to the many improvements in road environments and vehicle standards, and this is especially true of fatalistic beliefs and behaviours. This is a significant omission, since in different cultures in developing countries there are strong worldviews in which predestination persists as a central idea, i.e. that one's life (and death) and other events have been mapped out and are predetermined. Fatalism refers to a particular way in which people regard the events that occur in their lives, usually expressed as a belief that an individual does not have personal control over circumstances and that their lives are determined through a divine or powerful external agency (Hazen & Ehiri, 2006). These views are at odds with the dominant themes of modern health promotion movements, and present significant challenges for health advocates who aim to avert road crashes and diminish their consequences. The limited literature on fatalism reveals that it is not a simple concept, with religion, culture, superstition, experience, education and degree of perceived control of one's life all being implicated in accounts of fatalism. One distinction in the literature that seems promising is the distinction between empirical and theological fatalism, although there are areas of uncertainty about how well-defined the distinction between these types of fatalism is. Research into road safety in Pakistan is scarce, as is the case for other South Asian countries. From the review of the literature conducted, it is clear that the descriptions given of the different belief systems in developing countries including Pakistan are not entirely helpful for health promotion purposes and that further research is warranted on the influence of fatalism, superstition and other related beliefs in road safety. Based on the information available, a conceptual framework is developed as a means of structuring and focusing the research and analysis. The framework is focused on the influence of fatalism, superstition, religion and culture on beliefs about crashes and road user behaviour. Accordingly, this research aims to provide an understanding of the operation of fatalism and related beliefs in Pakistan to assist in the development and implementation of effective and culturally appropriate interventions. The research examines the influence of fatalism, superstition, religious and cultural beliefs on risky road use in Pakistan and is guided by three research questions: 1. What are the perceptions of road crash causation in Pakistan, in particular the role of fatalism, superstition, religious and cultural beliefs? 2. How does fatalism, superstition, and religious and cultural beliefs influence road user behaviour in Pakistan? 3. Do fatalism, superstition, and religious and cultural beliefs work as obstacles to road safety interventions in Pakistan? To address these questions, a qualitative research methodology was developed. The research focused on gathering data through individual in-depth interviewing using a semi-structured interview format. A sample of 30 participants was interviewed in Pakistan in the cities of Lahore, Rawalpindi and Islamabad. The participants included policy makers (with responsibility for traffic law), experienced police officers, religious orators, professional drivers (truck, bus and taxi) and general drivers selected through a combination of purposive, criterion and snowball sampling. The transcripts were translated from Urdu and analysed using a thematic analysis approach guided by the conceptual framework. The findings were divided into four areas: attribution of crash causation to fatalism; attribution of road crashes to beliefs about superstition and malicious acts; beliefs about road crash causation linked to popular concepts of religion; and implications for behaviour, safety and enforcement. Fatalism was almost universally evident, and expressed in a number of ways. Fate was used to rationalise fatal crashes using the argument that the people killed were destined to die that day, one way or another. Related to this was the sense of either not being fully in control of the vehicle, or not needing to take safety precautions, because crashes were predestined anyway. A variety of superstitious-based crash attributions and coping methods to deal with road crashes were also found, such as belief in the role of the evil eye in contributing to road crashes and the use of black magic by rivals or enemies as a crash cause. There were also beliefs related to popular conceptions of religion, such as the role of crashes as a test of life or a source of martyrdom. However, superstitions did not appear to be an alternative to religious beliefs. Fate appeared as the 'default attribution' for a crash when all other explanations failed to account for the incident. This pervasive belief was utilised to justify risky road use behaviour and to resist messages about preventive measures. There was a strong religious underpinning to the statement of fatalistic beliefs (this reflects popular conceptions of Islam rather than scholarly interpretations), but also an overlap with superstitious and other culturally and religious-based beliefs which have longer-standing roots in Pakistani culture. A particular issue which is explored in more detail is the way in which these beliefs and their interpretation within Pakistani society contributed to poor police reporting of crashes. The pervasive nature of fatalistic beliefs in Pakistan affects road user behaviour by supporting continued risk taking behaviour on the road, and by interfering with public health messages about behaviours which would reduce the risk of traffic crashes. The widespread influence of these beliefs on the ways that people respond to traffic crashes and the death of family members contribute to low crash reporting rates and to a system which appears difficult to change. Fate also appeared to be a major contributing factor to non-reporting of road crashes. There also appeared to be a relationship between police enforcement and (lack of) awareness of road rules. It also appears likely that beliefs can influence police work, especially in the case of road crash investigation and the development of strategies. It is anticipated that the findings could be used as a blueprint for the design of interventions aimed at influencing broad-spectrum health attitudes and practices among the communities where fatalism is prevalent. The findings have also identified aspects of beliefs that have complex social implications when designing and piloting driver intervention strategies. By understanding attitudes and behaviours related to fatalism, superstition and other related concepts, it should be possible to improve the education of general road users, such that they are less likely to attribute road crashes to chance, fate, or superstition. This study also underscores the understanding of this issue in high echelons of society (e.g., policy makers, senior police officers) as their role is vital in dispelling road users' misconceptions about the risks of road crashes. The promotion of an evidence or scientifically-based approach to road user behaviour and road safety is recommended, along with improved professional education for police and policy makers.

Planning for transit system reliability using productive performance and risk assessment

Urban transit system performance may be quantified and assessed using transit capacity and productive capacity for planning, design and operational management. Bunker (4) defines important productive performance measures of an individual transit service and transit line. Transit work (p-km) captures transit task performed over distance. Transit productiveness (p-km/h) captures transit work performed over time. This paper applies productive performance with risk assessment to quantify transit system reliability. Theory is developed to monetize transit segment reliability risk on the basis of demonstration Annual Reliability Event rates by transit facility type, segment productiveness, and unit-event severity. A comparative example of peak hour performance of a transit sub-system containing bus-on-street, busway, and rail components in Brisbane, Australia demonstrates through practical application the importance of valuing reliability. Comparison reveals the highest risk segments to be long, highly productive on street bus segments followed by busway (BRT) segments and then rail segments. A transit reliability risk reduction treatment example demonstrates that benefits can be significant and should be incorporated into project evaluation in addition to those of regular travel time savings, reduced emissions and safety improvements. Reliability can be used to identify high risk components of the transit system and draw comparisons between modes both in planning and operations settings, and value improvement scenarios in a project evaluation setting. The methodology can also be applied to inform daily transit system operational management.

Planning for transit system reliability using productive performance and risk assessment

Urban transit system performance may be quantified and assessed using transit capacity and productive capacity for planning, design and operational management. Bunker (4) defines important productive performance measures of an individual transit service and transit line. Transit work (p-km) captures transit task performed over distance. Transit productiveness (p-km/h) captures transit work performed over time. This paper applies productive performance with risk assessment to quantify transit system reliability. Theory is developed to monetize transit segment reliability risk on the basis of demonstration Annual Reliability Event rates by transit facility type, segment productiveness, and unit-event severity. A comparative example of peak hour performance of a transit sub-system containing bus-on-street, busway, and rail components in Brisbane, Australia demonstrates through practical application the importance of valuing reliability. Comparison reveals the highest risk segments to be long, highly productive on street bus segments followed by busway (BRT) segments and then rail segments. A transit reliability risk reduction treatment example demonstrates that benefits can be significant and should be incorporated into project evaluation in addition to those of regular travel time savings, reduced emissions and safety improvements. Reliability can be used to identify high risk components of the transit system and draw comparisons between modes both in planning and operations settings, and value improvement scenarios in a project evaluation setting. The methodology can also be applied to inform daily transit system operational management.

How safe is safe enough? : a socio-technical view of low-cost level crossing safety

Low-cost level crossings are often criticized as being unsafe. Does a SIL (safety integrity level) rating make the railway crossing any safer? This paper discusses how a supporting argument might be made for low-cost level crossing warning devices with lower levels of safety integrity and issues such as risk tolerability and derivation of tolerable hazard rates for system-level hazards. As part of the design of such systems according to fail-safe principles, the paper considers the assumptions around the pre-defined safe states of existing warning devices and how human factors issues around such states can give rise to additional hazards.

Modelling risk at low exposure railway level crossings : supporting an argument for low-cost level crossing warning devices with lower levels of safety integrity

This paper describes a risk model for estimating the likelihood of collisions at low-exposure railway level crossings, demonstrating the effect that differences in safety integrity can have on the likelihood of a collision. The model facilitates the comparison of safety benefits between level crossings with passive controls (stop or give-way signs) and level crossings that have been hypothetically upgraded with conventional or low-cost warning devices. The scenario presented illustrates how treatment of a cross-section of level crossings with low cost devices can provide a greater safety benefit compared to treatment with conventional warning devices for the same budget.

Translating vision research into policy and practice to improve the visibility, and hence safety, or road workers at night

The process of translating research into policy and practice is not well understood. This paper uses a case study approach to interpret an example of translation with respect to theoretical approaches identified in the literature. The case study concerns research into “biological motion” or “biomotion”: when lights are placed on the moveable joints of the body and the person moves in a dark setting, there is immediate and accurate recognition of the human form although only the lights can be seen. QUT was successful in gaining Australian Research Council funding with the support of the predecessors of the Queensland Department of Transport and Main Roads (TMR) to research the biomotion effect in road worker clothing using reflective tape rather than lights, and this resulted in the incorporation of biomotion marking into AS/NZS 4602.1 2011. The most promising approach to understanding the success of this translation, SWOV’s “knowledge utilisation approach” provided some insights but was more descriptive than predictive and provided “necessary but not sufficient” conditions for translation. In particular, the supportive efforts of TMR staff engaged in the review and promulgation of national standards were critical in this case. A model of the conclusions is presented. The experiences gained in this case should provide insights into the processes involved in effectively translating research into practice.

Trialling low-cost level crossing warning devices in Australia

This paper discusses the methodology and design of the Cooperative Research Centre for Rail Innovation’s national low-cost level crossing trial programme currently being conducted in Australia. Three suppliers of innovative low-cost level crossing warning devices were chosen through a tendering and evaluation process. The paper outlines the acceptance criteria that were used to select the suppliers and describes the different types of train detection technologies and innovative cost- reduction solutions that are being tested as part of the trial. The trial is being hosted by three major railways in three different regions in Australia, where systems from the three suppliers have been installed parallel to a baseline conventional track-circuit based level crossing at each site. The paper discusses our experience to date, the trialling process and the challenges that the project has confronted in order to develop a nationally consistent trialling programme.

Specification & design of safety technologies for complex socio-technical systems : low-cost level crossings case study

The introduction of safety technologies into complex socio-technical systems requires an integrated and holistic approach to HF and engineering, considering the effects of failures not only within system boundaries, but also at the interfaces with other systems and humans. Level crossing warning devices are examples of such systems where technically safe states within the system boundary can influence road user performance, giving rise to other hazards that degrade safety of the system. Chris will discuss the challenges that have been encountered to date in developing a safety argument in support of low-cost level crossing warning devices. The design and failure modes of level crossing warning devices are known to have a significant influence on road user performance; however, quantifying this effect is one of the ongoing challenges in determining appropriate reliability and availability targets for low-cost level crossing warning devices.

Bike share's impact on car use : evidence from the United States, Great Britain, and Australia

There are currently more than 700 cities operating bike share programs. Purported benefits of bike share include flexible mobility, physical activity, reduced congestion, emissions and fuel use. Implicit or explicit in the calculation of program benefits are assumptions regarding the modes of travel replaced by bike share journeys. This paper examines the degree to which car trips are replaced by bike share, through an examination of survey and trip data from bike share programs in Melbourne, Brisbane, Washington, D.C., London, and Minneapolis/St. Paul. A secondary and unique component of this analysis examines motor vehicle support services required for bike share fleet rebalancing and maintenance. These two components are then combined to estimate bike share’s overall contribution to changes in vehicle kilometers traveled. The results indicate an estimated reduction in motor vehicle use due to bike share of approx. 90,000 km per annum in Melbourne and Minneapolis/St. Paul and 243,291 km for Washington, D.C. London’s bike share program however recorded an additional 766,341 km in motor vehicle use. This was largely due to a low car mode substitution rate and substantial truck use for rebalancing of bicycles. As bike share programs mature, evaluation of their effectiveness in reducing car use may become increasingly important. Researchers can adapt the analytical approach proposed in this paper to assist in the evaluation of current and future bike share programs.

Training needs research applied to the development of a standardised incident investigator training framework

In response to the rail industry lacking a consistently accepted standard of minimal training to perform incident investigations, the Australasian rail industry requested the development of a unified approach to investigator training. This paper details how the findings from a training needs analysis were applied to inform the development of a standardised training package for rail incident investigators. Data from job descriptions, training documents and subject matter experts sourced from 17 Australasian organisations were analysed and refined to yield a draft set of 10 critical competencies. Finally the draft of critical competencies was reviewed by industry experts to verify the accuracy and completeness of the competency list and to consider the most appropriate level of qualification for training development. The competencies identified and the processes described to translate research into an applied training framework in this paper, can be generalised to assist practitioners and researchers in developing industry approved standardised training packages.

Factors influencing bike share membership : an analysis of Melbourne and Brisbane

The number of bike share programs has increased rapidly in recent years and there are currently over 700 programs in operation globally. Australia’s two bike share programs have been in operation since 2010 and have significantly lower usage rates compared to Europe, North America and China. This study sets out to understand and quantify the factors influencing bike share membership in Australia’s two bike share programs located in Melbourne and Brisbane. An online survey was administered to members of both programs as well as a group with no known association with bike share. A logistic regression model revealed several significant predictors of membership including reactions to mandatory helmet legislation, riding activity over the previous month, and the degree to which convenience motivated private bike riding. In addition, respondents aged 18 - 34 and having docking station within 250m of their workplace were found to be statistically significant predictors of bike share membership. Finally, those with relatively high incomes increased the odds of membership. These results provide insight as to the relative influence of various factors impacting on bike share membership in Australia. The findings may assist bike share operators to maximize membership potential and help achieve the primary goal of bike share – to increase the sustainability of the transport system.

Recent advances in modeling the vulnerability of transportation networks

It is well known that, for major infrastructure networks such as electricity, gas, railway, road, and urban water networks, disruptions at one point have a knock on effect throughout the network. There is an impressive amount of individual research projects examining the vulnerability of critical infrastructure network. However, there is little understanding of the totality of the contribution made by these projects and their interrelationships. This makes their review a difficult process for both new and existing researchers in the field. To address this issue, a two-step literature review process is used, to provide an overview of the vulnerability of the transportation network in terms of four main themes - research objective, transportation mode, disruption scenario and vulnerability indicator –involving the analysis of related articles from 2001 to 2013. Two limitations of existing research are identified: (1) the limited amount of studies relating to multi-layer transportation network vulnerability analysis, and (2) the lack of evaluation methods to explore the relationship between structure vulnerability and dynamical functional vulnerability. In addition to indicating that more attention needs to be paid to these two aspects in future, the analysis provides a new avenue for the discovery of knowledge, as well as an improved understanding of transportation network vulnerability.

The role of university research centres in building road safety capacity : implications for China

In recent decades, highly motorised countries, such as Australia, have witnessed significant improvements in population health through reductions in fatalities and injuries from road traffic crashes. In Australia, concerted efforts have been made to reduce the road trauma burden since road fatalities reached their highest level in in the early 1970s. Since that time, many improvements have been made drawing on various disciplines to reduce the trauma burden (e.g., road and vehicle design, road user education, traffic law enforcement practices and enforcement technologies). While road fatalities have declined significantly since the mid-1970s, road trauma remains a serious public health concern in Australia. China has recently become the largest car market in the world (Ma, Li, Zhou, Duan, & Bishai, 2012). This rapid motorisation has been accompanied by substantial expansion of the road network as well as a large road trauma burden. Road traffic injuries are a major cause of death in China, reported as accounting for one third of all injury-deaths between 2002 and 2006 (Ma et al., 2012). In common with Australia, China has experienced a reported decline in fatalities since 2002 (see Hu, Wen & Baker, 2008). However, there remains a strong need for action in this area as rates of motorisation continue to climb in China. In Australia, a wide range of organisations have contributed to the improvements in road safety including government agencies, professional organisations, advocacy groups and research centres. In particular, Australia has several highly regarded and multi-disciplinary, university-based research centres that work across a range of road safety fields, including engineering, intelligent transportation systems, the psychology of road user behaviour, and traffic law enforcement. Besides conducting high-quality research, these centres fulfil an important advocacy role in promoting safer road use and facilitating collaborations with government and other agencies, at both the national and international level. To illustrate the role of these centres, an overview will be provided of the Centre for Accident Research and Road Safety-Queensland (CARRS-Q), which was established in 1996 and has gone on to become a recognised world-leader in road safety and injury prevention research. The Centre’s research findings are used to provide evidence-based recommendations to government and have directly contributed to promoting safer road use in Australia. Since 2006, CARRS-Q has also developed strong collaborative links with various universities and organisations in China to assist in building understanding, connections and capacity to assist in reducing the road trauma burden. References Hu, G., Wen, M., Baker, T. D., & Baker, S. P. (2008). Road-traffic deaths in China, 1985–2005: threat and opportunity. Injury Prevention, 14, 149-153. Ma, S., Li, Q., Zhou, M., Duan, L., & Bishai, D. (2012). Road Traffic Injury in China: A Review of National Data Sources. Traffic Injury Prevention, 13(S1), 57-63.