Even moderate visual impairments degrade drivers’ ability to see pedestrians at night

Purpose: To determine the effect of moderate levels of refractive blur and simulated cataracts on nighttime pedestrian conspicuity in the presence and absence of headlamp glare. Methods: The ability to recognize pedestrians at night was measured in 28 young adults (M=27.6 years) under three visual conditions: normal vision, refractive blur and simulated cataracts; mean acuity was 20/40 or better in all conditions. Pedestrian recognition distances were recorded while participants drove an instrumented vehicle along a closed road course at night. Pedestrians wore one of three clothing conditions and oncoming headlamps were present for 16 participants and absent for 12 participants. Results: Simulated visual impairment and glare significantly reduced the frequency with which drivers recognized pedestrians and the distance at which the drivers first recognized them. Simulated cataracts were significantly more disruptive than blur even though photopic visual acuity levels were matched. With normal vision, drivers responded to pedestrians at 3.6x and 5.5x longer distances on average than for the blur or cataract conditions, respectively. Even in the presence of visual impairment and glare, pedestrians were recognized more often and at longer distances when they wore a “biological motion” reflective clothing configuration than when they wore a reflective vest or black clothing. Conclusions: Drivers’ ability to recognize pedestrians at night is degraded by common visual impairments even when the drivers’ mean visual acuity meets licensing requirements. To maximize drivers’ ability to see pedestrians, drivers should wear their optimum optical correction, and cataract surgery should be performed early enough to avoid potentially dangerous reductions in visual performance.

Implementing a systematic process for rapidly embedding sustainability within chemical engineering education: a case study of James Cook University, Australia

Sustainability has emerged as a primary context for engineering education in the 21st Century, particularly the sub-discipline of chemical engineering. However, there is confusion over how to go about integrating sustainability knowledge and skills systemically within bachelor degrees. This paper addresses this challenge, using a case study of an Australian chemical engineering degree to highlight important practical considerations for embedding sustainability at the core of the curriculum. The paper begins with context for considering a systematic process for rapid curriculum renewal. The authors then summarise a 2-year federally funded project, which comprised piloting a model for rapid curriculum renewal led by the chemical engineering staff. Model elements contributing to the renewal of this engineering degree and described in this paper include: industry outreach; staff professional development; attribute identification and alignment; program mapping; and curriculum and teaching resource development. Personal reflections on the progress and process of rapid curriculum renewal in sustainability by the authors and participating engineering staff will be presented as a means to discuss and identify methodological improvements, as well as highlight barriers to project implementation. It is hoped that this paper will provide an example of a formalised methodology on which program reform and curriculum renewal for sustainability can be built upon in other higher education institutions.

ACE research briefing paper 002: learning and adaptation in the business creation process

This year marks the completion of data collection for year three (Wave 3) of the CAUSEE study. This report uses data from the first three years and focuses on the process of learning and adaptation in the business creation process. Most start-ups need to change their business model, their product, their marketing plan, their market or something else about the business to be successful. PayPal changed their product at least five times, moving from handheld security, to enterprise apps, to consumer apps, to a digital wallet, to payments between handhelds before finally stumbling on the model that made the a multi-billion dollar company revolving around email-based payments. PayPal is not alone and anecdotes abounds of start-ups changing direction: Sysmantec started as an artificial intelligence company, Apple started selling plans to build computers and Microsoft tried to peddle compilers before licensing an operating system out of New Mexico. To what extent do Australian new ventures change and adapt as their ideas and business develop? As a longitudinal study, CAUSEE was designed specifically to observe development in the venture creation process. In this research briefing paper, we compare development over time of randomly sampled Nascent Firms (NF) and Young Firms(YF), concentrating on the surviving cases. We also compare NFs with YFs at each yearly interval. The 'high potential' over sample is not used in this report.

Visual acuity is not what it seems : on Ian Burn's 'Late' reflections

A whole tradition is said to be based on the hierarchical distinction between the perceptual and conceptual. In art, Niklas Luhmann argues, this schism is played out and repeated in conceptual art. This paper complicates this depiction by examining Ian Burn's last writings in which I argue the artist-writer reviews the challenge of minimal-conceptual art in terms of its perceptual pre-occupations. Burn revisits his own work and the legacy of minimal-conceptual by moving away from the kind of ideology critique he is best known for internationally in order to reassert the long overlooked visual-perceptual preoccupations of the conceptual in art.

Robust performance analysis on YAWL process models with advanced constructs

The importance of actively managing and analyzing business processes is acknowledged more than ever in organizations nowadays. Business processes form an essential part of an organization and their ap-plication areas are manifold. Most organizations keep records of various activities that have been carried out for auditing purposes, but they are rarely used for analysis purposes. This paper describes the design and implementation of a process analysis tool that replays, analyzes and visualizes a variety of performance metrics using a process definition and its execution logs. Performing performance analysis on existing and planned process models offers a great way for organizations to detect bottlenecks within their processes and allow them to make more effective process improvement decisions. Our technique is applied to processes modeled in the YAWL language. Execution logs of process instances are compared against the corresponding YAWL process model and replayed in a robust manner, taking into account any noise in the logs. Finally, performance characteristics, obtained from replaying the log in the model, are projected onto the model.

Characterisation of sugarcane juice particles that influence the clarification process

Problems associated with processing whole sugarcane crop can be minimised by removing impurities during the clarification stage. As a first step, it is important to understand the colloidal chemistry of juice particles on a molecular level to assist development strategies for effective clarification performance. This paper presents the composition and surface characteristics of colloidal particles originating from various juice types by using scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX), X-ray photoelectron spectroscopy (XPS) and zeta potential measurements. The composition and surface characteristics of colloidal juice particles are reported. The results indicate that there are three types of colloidal particles present viz., an aluminosilicate compound, silica and iron oxide, with the latter two being abundant. Proteins, polysaccharides and organic acids were identified on the surface of particles in juice. The overall particle charge varies from –2 mV to –6 mV. In comparison to juice expressed from burnt cane, the zeta potential values were more negative with juice particles originating from whole crop. This in part explains why these juices are difficult to clarify.

Public participation in infrastructure and construction projects in China: From an EIA-based to a whole-cycle process

Many governments world-wide are increasingly encouraging the involvement of interested individuals, groups and organisations in their publicinfrastructure and construction (PIC) projects as a means of improving the openness, transparency and accountability of the decision-making process and help improve the projects’ long-term viability and benefits to the community. In China, however, the current participatory mechanism at the project level exists only as part of the environmental impact assessment (EIA) process. With an increasing demand for PIC projects and social equality in China, this suggests a need to bring the participatory process into line with international practice. The aim of this paper, therefore, is to identify the weaknesses of EIA-basedpublicparticipation in China and the means by which it may be improved for the whole lifecycle of PIC schemes. To do this, the results of a series of interviews with a diverse group of experts is reported which analyse the nature and extent of existing problems of publicparticipation in EIA and suggestions for improvement. These indicate that the current level of participation in PIC projects is quite limited, particularly in the crucial earlier stages, primarily due to traditional culture and values, uneven progress in the adoption of participatory mechanisms, the risk of not meeting targets and lack of confidence in public competence. Finally, aprocess flowchart is proposed to guide construction practitioners and the community in general.

Optimisation of process parameters for the removal of hydroxycinnamic acids in sugar solutions

Colour is one of the most important parameters in sugar quality and its presence in raw sugar plays a key role in the marketing strategy of sugar industries worldwide. This study investigated the degradation of a mixture of colour precursors using the Fenton oxidation process. These colour precursors are caffeic acid, p–coumaric acid and ferulic acid, which are present in cane juice. Results showed that with a Fe(II) to H2O2 molar ratio of 1:15 in an aqueous system at 25 °C, 77% of the total phenolic acid content was removed at pH 4.72. However, in a synthetic juice solution which contained 13 mass % sucrose (35 °C, pH 5.4), only 60% of the total phenolic acid content was removed.

Current research in risk-aware business process management : overview, comparison, and gap analysis

The management of risks in business processes has been a subject of active research in the past few years. Many benefits can potentially be obtained by integrating the two traditionally-separated fields of risk management and business process management, including the ability to minimize risks in business processes (by design) and to mitigate risks at run time. In the past few years, an increasing amount of research aimed at delivering such an integrated system has been proposed. However, these research efforts vary in terms of their scope, goals, and functionality. Through systematic collection and evaluation of relevant literature, this paper compares and classifies current approaches in the area of risk-aware business process management in order to identify and explain relevant research gaps. The process through which relevant literature is collected, filtered, and evaluated is also detailed.

"Participation" in participatory design research

This thesis is about defining participation in the context of fostering research cohesion in the field of Participatory Design. The systematic and incremental building of new knowledge is the process by which science and research is advanced. This process requires a certain type of cohesion in the way research is undertaken for new knowledge to be built from the knowledge provided by previous projects and research. To support this process and to foster research cohesion three conditions are necessary. These conditions are: common ground between practitioners, problem-space positioning, and adherence to clear research criteria. The challenge of fostering research cohesion in Participatory Design is apparent in at least four themes raised in the literature: the role of politics within Participatory Design epistemology, the role of participation, design with users, and the ability to translate theory into practice. These four thematic challenges frame the context which the research gap is situated. These themes are also further investigated and the research gap – a general lack of research cohesion – along with one avenue for addressing this gap – a clear and operationalizable definition for participation – are identified. The intended contribution of this thesis is to develop a framework and visual tool to address this research gap. In particular, an initial approximation for a clear and operationalizable definition for participation will be proposed such that it can be used within the field of Participatory Design to run projects and foster research cohesion. In pursuit of this contribution, a critical lens is developed and used to analyse some of the principles and practices of Participatory Design that are regarded as foundational. This lens addresses how to define participation in a way that adheres to basic principles of scientific rigour – namely, ensuring that the elements of a theory are operationalizable, falsifiable, generalizable, and useful, and it also treats participation as a construct rather than treating the notion of participation as a variable. A systematic analysis is performed using this lens on the principles and practices that are considered foundational within the field. From this analysis, three components of the participation construct – impact, influence, and agency – are identified. These components are then broken down into two constituent variables each (six in all) and represented visually. Impact is described as the relationship between the quality and use of information. Influence is described as the relationship between the amount and scope of decision making. Agency is described as the relationship between the motivation of the participant and the solidarity of the group. Thus, as a construct, participation is described as the relationship between a participant’s impact, influence, and agency. In the concluding section, the value of this participation construct is explored for its utility in enhancing project work and fostering research cohesion. Three items of potential value that emerge are: the creation of a visual tool through the representation of these six constituent variables in one image; the elaboration of a common language for researchers based on the six constituent variables identified; and the ability to systematically identify and remedy participation gaps throughout the life of the project. While future research exploring the applicability of the participation construct in real world projects is necessary, it is intended that this initial approximation of a participation construct in the form of the visual tool will serve as the basis for a cohesive and rigorous discussion about participation in Participatory Design.

Do balanced skills help nascent entrepreneurs to make progress in the venture creation process?

We analyze longitudinal data on innovative start-up projects and apply Lazear’s jack-of-all-trades theory to investigate the effect of nascent entrepreneurs’ balanced skills on their progress in the venture creation process. Our results suggest that those nascent entrepreneurs who exhibit a sufficiently broad set of skills undertake more gestation activities towards an operational new venture. This supports the notion that a balanced skill set is an important determinant of entrepreneurial market entry.

Rapid prototyping framework for visual control of autonomous micro aerial vehicles

Rapid prototyping environments can speed up the research of visual control algorithms. We have designed and implemented a software framework for fast prototyping of visual control algorithms for Micro Aerial Vehicles (MAV). We have applied a combination of a proxy-based network communication architecture and a custom Application Programming Interface. This allows multiple experimental configurations, like drone swarms or distributed processing of a drone's video stream. Currently, the framework supports a low-cost MAV: the Parrot AR.Drone. Real tests have been performed on this platform and the results show comparatively low figures of the extra communication delay introduced by the framework, while adding new functionalities and flexibility to the selected drone. This implementation is open-source and can be downloaded from www.vision4uav.com/?q=VC4MAV-FW

See-and-avoid quadcopter using fuzzy control optimized by cross-entropy

In this work we present an optimized fuzzy visual servoing system for obstacle avoidance using an unmanned aerial vehicle. The cross-entropy theory is used to optimise the gains of our controllers. The optimization process was made using the ROS-Gazebo 3D simulation with purposeful extensions developed for our experiments. Visual servoing is achieved through an image processing front-end that uses the Camshift algorithm to detect and track objects in the scene. Experimental flight trials using a small quadrotor were performed to validate the parameters estimated from simulation. The integration of cross- entropy methods is a straightforward way to estimate optimal gains achieving excellent results when tested in real flights.

Root cause analysis with enriched process logs

In the field of process mining, the use of event logs for the purpose of root cause analysis is increasingly studied. In such an analysis, the availability of attributes/features that may explain the root cause of some phenomena is crucial. Currently, the process of obtaining these attributes from raw event logs is performed more or less on a case-by-case basis: there is still a lack of generalized systematic approach that captures this process. This paper proposes a systematic approach to enrich and transform event logs in order to obtain the required attributes for root cause analysis using classical data mining techniques, the classification techniques. This approach is formalized and its applicability has been validated using both self-generated and publicly-available logs.